Prügikastid

Projektide hinnapäringud palume saata e-mailiga: info@pegu.ee
Klientide nõustamine 9.00-19.00, tel.+372 515 0681
PEGU0121 sisesta sooduskood ostukorvi lehel kupongi lahtrisse!
MATERIALS:
Waste Receptacle — 18-8, type-304, 16-gauge (1.6mm) stainless steel with satin finish. All-welded construction. 1/2" (13mm) recessed bottom equipped with four 1-1/2" (40mm) diameter x 3/4" (19mm) high, heavy-duty rubber feet.
Funnel Top — 18-8, type-304, 16-gauge (1.6mm) stainless steel with satin finish. One-piece construction. 8-1/4" (210mm) diameter opening.
Waste Container — Galvanized steel with wire handle. Removable for servicing. Capacity: 33-gal. (125-L).OPERATION:
Funnel top lifts off for removal and servicing of waste container. Wide opening provides hygienic, no-touch waste disposal. Heavy-duty rubber feet protect flooring and elevate receptacle slightly off the floor.
Designer's Note: This unit is not suitable for outside use.SPECIFICATION:
Floor-standing waste receptacle shall be type-304, 16-gauge (1.6mm) stainless steel with satin finish. One-piece funnel top shall have 8-1/4" (210mm) diameter opening. Bottom of receptacle shall be recessed 1/2" (13mm) and equipped with four heavy- duty rubber feet that elevate receptacle slightly off floor. Removable, rigid plastic liner shall have a wire handle and a minimum capacity of 33-gal. (125-L).
HYGIENE WASTE BIN WP 179
202 x 250 x 115 mm
ca. 4 l
- Hygiene waste bin in robust, germ-reducing and easy-care stainless steel (AISI 304).
- All-stainless steel housing; visible surfaces satin finished and brushed.
Further available surfaces: see below. - Equipped with removable hygiene bin. Capacity approx. 4 l.
- Accessible through hinged lid.
- Mounting: With four screws through key holes and one optional anti-theft hole in the back wall.
- Delivery includes fixing material.
- Weight (in kg): 2,5
AVAILABLE SURFACES | ORDER NUMBERS |
---|---|
satin finished (standard) | 727050 |
highly polished | 731050 |
(coloured) plastic powder - coating | 728030 |
170,50 €
HYGIENE WASTE BIN FOR FLUSH-MOUNTING WP 138
298 x 598 x 120 mm
approx. 6 l
- Hygiene waste bin with storage container in robust, germ-reducing and easy-care stainless steel (AISI 304).
- All-stainless steel housing; all corners fully welded, visible surfaces satin finished and brushed.
Further available surfaces: see below. - Equipped with removable hygiene bin. Capacity approx. 6 l. Accessible through lockable door with self-closing, flame-retardant disposal flap.
- Storage container integrated at the top for standard paper sanitary bags with dimensions:
approx. 120 x 290 mm. - Keyed alike cylinder lock in corrosion-resistant zinc die-casting.
- Wear parts can be replaced as modules.
- Installation dimensions: 300 x 600 x 110 mm
- Mounting: With four screws in wall opening through fixing holes in the side walls.
- Delivery includes fixing material.
- Weight (in kg): 5,9
AVAILABLE SURFACES | ORDER NUMBERS |
---|---|
satin finished (standard) | 728150 |
highly polished | 731150 |
(coloured) plastic powder - coating | 728116 |
Hygiene waste bin with integrated storage container at the top for standard paper sanitary bags in stainless steel (AISI 304) for flush mounting. All-stainless steel housing; all corners fully welded, visible surfaces satin finished and brushed. Equipped with removable hygiene bin. Capacity approx. 6 l. Accessible through lockable door with self-closing, flame-retardant disposal flap. Keyed alike cylinder lock in corrosion-resistant zinc die-casting. Delivery includes fixing material.
Dimensions: 298 x 598 x 120 mm
Article No. WP138
483,60 €
HYGIENE WASTE BIN FOR FLUSH-MOUNTING WP 138
298 x 598 x 120 mm
approx. 6 l
- Hygiene waste bin with storage container in robust, germ-reducing and easy-care stainless steel (AISI 304).
- All-stainless steel housing; all corners fully welded, visible surfaces satin finished and brushed.
Further available surfaces: see below. - Equipped with removable hygiene bin. Capacity approx. 6 l. Accessible through lockable door with self-closing, flame-retardant disposal flap.
- Storage container integrated at the top for standard paper sanitary bags with dimensions:
approx. 120 x 290 mm. - Keyed alike cylinder lock in corrosion-resistant zinc die-casting.
- Wear parts can be replaced as modules.
- Installation dimensions: 300 x 600 x 110 mm
- Mounting: With four screws in wall opening through fixing holes in the side walls.
- Delivery includes fixing material.
- Weight (in kg): 5,9
AVAILABLE SURFACES | ORDER NUMBERS |
---|---|
satin finished (standard) | 728150 |
highly polished | 731150 |
(coloured) plastic powder - coating | 728116 |
Hygiene waste bin with integrated storage container at the top for standard paper sanitary bags in stainless steel (AISI 304) for flush mounting. All-stainless steel housing; all corners fully welded, visible surfaces satin finished and brushed. Equipped with removable hygiene bin. Capacity approx. 6 l. Accessible through lockable door with self-closing, flame-retardant disposal flap. Keyed alike cylinder lock in corrosion-resistant zinc die-casting. Delivery includes fixing material.
Dimensions: 298 x 598 x 120 mm
Article No. WP138
544,00 €
HYGIENE WASTE BIN WITH PAPER SANITARY BAG DISPENSER WP 140
282 x 392 x 203 mm
ca. 12 l
- Hygiene waste bin with paper sanitary bag dispenser in robust, germ-reducing and easy-care stainless steel (AISI 304).
- All-stainless steel housing; visible surfaces satin finished and brushed. Further available surfaces: see below.
- Equipped with removable hygiene bin. Capacity approx. 12 l.
- On the backside integrated paper sanitary bag dispenser. Designed for ca. 100 standard paper sanitary bags.
- Accessible through hinged lid.
- Mounting: With four screws through key holes and one optional anti-theft hole in the back wall.
- Delivery includes fixing material.
- Weight (in kg): 6,4
AVAILABLE SURFACES | ORDER NUMBERS |
---|---|
satin finished (standard) | 727087 |
highly polished | 731087 |
(coloured) plastic powder - coating | 728087 |
Hygiene waste bin with paper sanitary bag dispenser in stainless steel (AISI 304) for surface mounting. All-stainless steel housing; visible surfaces satin finished and brushed. Equipped with removable hygiene bin. Capacity approx. 12 l. On the backside integrated paper sanitary bag dispenser. Accessible through hinged lid. Delivery includes fixing material.
Dimensions: 282 x 392 x 203 mm
Article No. WP140
402,00 €
HYGIENE WASTE BIN WITH SANITARY BAG DISPENSER WP 177-2
300 x 398 x 155 mm
ca. 12 l
- Hygiene waste bin with sanitary bag dispenser in robust, germ-reducing and easy-care stainless steel (AISI 304).
- All-stainless steel housing; visible surfaces satin finished and brushed.
Further available surfaces: see below. - Equipped with removable hygiene bin. Capacity approx. 12 l.
- Sanitary bag dispenser integrated on the side.
Designed for one standard box of plastic sanitary bags with dimensions of approx. 118 x 87 x 20 mm. - Accessible through hinged lid.
- Mounting: With four screws through key holes and one optional anti-theft hole in the back wall.
- Delivery includes fixing material and one box of plastic sanitary bags.
- Weight (in kg): 5,7
AVAILABLE SURFACES | ORDER NUMBERS |
---|---|
satin finished (standard) | 727340 |
highly polished | 731340 |
(coloured) plastic powder - coating | 728340 |
Hygiene waste bin with sanitary bag dispenser in stainless steel (AISI 304) for surface mounting. All-stainless steel housing; visible surfaces satin finished and brushed. Equipped with removable hygiene bin. Capacity approx. 12 l. Sanitary bag dispenser integrated on the side. Accessible through hinged lid. Delivery includes fixing material and one box of plastic sanitary bags.
Dimensions: 300 x 398 x 155 mm
Article No. WP177-2
389,00 €
HYGIENE WASTE BIN WITH PAPER SANITARY BAG DISPENSER WP 140
282 x 392 x 203 mm
ca. 12 l
- Hygiene waste bin with paper sanitary bag dispenser in robust, germ-reducing and easy-care stainless steel (AISI 304).
- All-stainless steel housing; visible surfaces satin finished and brushed. Further available surfaces: see below.
- Equipped with removable hygiene bin. Capacity approx. 12 l.
- On the backside integrated paper sanitary bag dispenser. Designed for ca. 100 standard paper sanitary bags.
- Accessible through hinged lid.
- Mounting: With four screws through key holes and one optional anti-theft hole in the back wall.
- Delivery includes fixing material.
- Weight (in kg): 6,4
AVAILABLE SURFACES | ORDER NUMBERS |
---|---|
satin finished (standard) | 727087 |
highly polished | 731087 |
(coloured) plastic powder - coating | 728087 |
Hygiene waste bin with paper sanitary bag dispenser in stainless steel (AISI 304) for surface mounting. All-stainless steel housing; visible surfaces satin finished and brushed. Equipped with removable hygiene bin. Capacity approx. 12 l. On the backside integrated paper sanitary bag dispenser. Accessible through hinged lid. Delivery includes fixing material.
Dimensions: 282 x 392 x 203 mm
Article No. WP140
532,00 €
HYGIENE WASTE BIN WITH SANITARY BAG DISPENSER WP 177-2
300 x 398 x 155 mm
ca. 12 l
- Hygiene waste bin with sanitary bag dispenser in robust, germ-reducing and easy-care stainless steel (AISI 304).
- All-stainless steel housing; visible surfaces satin finished and brushed.
Further available surfaces: see below. - Equipped with removable hygiene bin. Capacity approx. 12 l.
- Sanitary bag dispenser integrated on the side.
Designed for one standard box of plastic sanitary bags with dimensions of approx. 118 x 87 x 20 mm. - Accessible through hinged lid.
- Mounting: With four screws through key holes and one optional anti-theft hole in the back wall.
- Delivery includes fixing material and one box of plastic sanitary bags.
- Weight (in kg): 5,7
AVAILABLE SURFACES | ORDER NUMBERS |
---|---|
satin finished (standard) | 727340 |
highly polished | 731340 |
(coloured) plastic powder - coating | 728340 |
Hygiene waste bin with sanitary bag dispenser in stainless steel (AISI 304) for surface mounting. All-stainless steel housing; visible surfaces satin finished and brushed. Equipped with removable hygiene bin. Capacity approx. 12 l. Sanitary bag dispenser integrated on the side. Accessible through hinged lid. Delivery includes fixing material and one box of plastic sanitary bags.
Dimensions: 300 x 398 x 155 mm
Article No. WP177-2
501,00 €
HYGIENE WASTE BIN WP 179-2
300 x 398 x 155 mm
ca. 12 l
- Hygiene waste bin with in robust, germ-reducing and easy-care stainless steel (AISI 304).
- All-stainless steel housing; visible surfaces satin finished and brushed.
Further available surfaces: see below. - Equipped with removable hygiene bin. Capacity approx. 12 l.
- Accessible through hinged lid.
- Mounting: With four screws through key holes and one optional anti-theft hole in the back wall.
- Delivery includes fixing material.
- Weight (in kg): 5,5
AVAILABLE SURFACES | ORDER NUMBERS |
---|---|
satin finished (standard) | 727350 |
highly polished | 731350 |
(coloured) plastic powder - coating | 729350 |
Hygiene waste bin in stainless steel (AISI 304) for surface mounting. All-stainless steel housing; visible surfaces satin finished and brushed. Equipped with removable hygiene bin. Capacity approx. 12 l. Accessible through hinged lid. Delivery includes fixing material.
Dimensions: 300 x 398 x 155 mm
Article No. WP179-2
315,00 €
HYGIENE WASTE BIN WP 179-2
300 x 398 x 155 mm
ca. 12 l
- Hygiene waste bin with in robust, germ-reducing and easy-care stainless steel (AISI 304).
- All-stainless steel housing; visible surfaces satin finished and brushed.
Further available surfaces: see below. - Equipped with removable hygiene bin. Capacity approx. 12 l.
- Accessible through hinged lid.
- Mounting: With four screws through key holes and one optional anti-theft hole in the back wall.
- Delivery includes fixing material.
- Weight (in kg): 5,5
AVAILABLE SURFACES | ORDER NUMBERS |
---|---|
satin finished (standard) | 727350 |
highly polished | 731350 |
(coloured) plastic powder - coating | 729350 |
Hygiene waste bin in stainless steel (AISI 304) for surface mounting. All-stainless steel housing; visible surfaces satin finished and brushed. Equipped with removable hygiene bin. Capacity approx. 12 l. Accessible through hinged lid. Delivery includes fixing material.
Dimensions: 300 x 398 x 155 mm
Article No. WP179-2
414,00 €
WASTE BIN WITH FLAP WP 180
298 x 598 x 308 mm
36 l
- Waste bin with disposal in robust, germ-reducing and easy-care stainless steel (AISI 304).
- All-stainless steel housing; all corners fully welded, visible surfaces satin finished and brushed.
Further available surfaces: see below. - Equipped with removable mesh basket. Capacity approx. 36 l.
Accessible through lockable door.
On the top two-part self-closing and flame-retardant disposal flap. - Also suitable for use as a hygiene waste bin with the optional plastic hygiene bin WP18.
- Keyed alike cylinder lock in corrosion-resistant zinc die-casting.
- Wear parts can be replaced as modules.
- With four rubber feet suitable for floor installation.
- Mounting: With four screws through key holes and one optional anti-theft hole in the back wall.
- Delivery includes fixing material.
- Weight (in kg): 9,6
AVAILABLE SURFACES | ORDER NUMBERS |
---|---|
satin finished (standard) | 769048 |
highly polished | 731048 |
(coloured) plastic powder - coating | 728048 |
Waste bin in stainless steel (AISI 304) for surface mounting or floor installation. All-stainless steel housing; all corners fully welded, visible surfaces satin finished and brushed. Equipped with removable mesh basket. Capacity approx. 36 l. Accessible through lockable door. On the top two-part self-closing and flame-retardant disposal flap. Keyed alike cylinder lock in corrosion-resistant zinc die-casting. Delivery includes fixing material.
Dimensions: 298 x 598 x 310 mm
Article No. WP180
610,00 €
WASTE BIN WP 181
298 x 598 x 308 mm
36 l
- Waste bin in robust, germ-reducing and easy-care stainless steel (AISI 304).
- All-stainless steel housing; all corners fully welded, visible surfaces satin finished and brushed.
Further available surfaces: see below. - Equipped with removable mesh basket. Capacity approx. 36 l.
Accessible through lockable door. - Also suitable for use as a hygiene waste bin with the optional plastic hygiene bin WP18.
- Keyed alike cylinder lock in corrosion-resistant zinc die-casting.
- Wear parts can be replaced as modules.
- With four rubber feet suitable for floor installation.
- Mounting: With four screws through key holes and one optional anti-theft hole in the back wall.
- Delivery includes fixing material.
- Weight (in kg): 9,6
AVAILABLE SURFACES | ORDER NUMBERS |
---|---|
satin finished (standard) | 769047 |
highly polished | 731047 |
(coloured) plastic powder - coating | 728047 |
Waste bin in stainless steel (AISI 304) for surface mounting or floor installation. All-stainless steel housing; all corners fully welded, visible surfaces satin finished and brushed. Equipped with removable mesh basket. Capacity approx. 36 l. Accessible through lockable door. Keyed alike cylinder lock in corrosion-resistant zinc die-casting. Delivery includes fixing material.
Dimensions: 298 x 598 x 310 mm
Article No. WP181
511,00 €
WASTE BIN WITH FLAP WP 180
298 x 598 x 308 mm
36 l
- Waste bin with disposal in robust, germ-reducing and easy-care stainless steel (AISI 304).
- All-stainless steel housing; all corners fully welded, visible surfaces satin finished and brushed.
Further available surfaces: see below. - Equipped with removable mesh basket. Capacity approx. 36 l.
Accessible through lockable door.
On the top two-part self-closing and flame-retardant disposal flap. - Also suitable for use as a hygiene waste bin with the optional plastic hygiene bin WP18.
- Keyed alike cylinder lock in corrosion-resistant zinc die-casting.
- Wear parts can be replaced as modules.
- With four rubber feet suitable for floor installation.
- Mounting: With four screws through key holes and one optional anti-theft hole in the back wall.
- Delivery includes fixing material.
- Weight (in kg): 9,6
AVAILABLE SURFACES | ORDER NUMBERS |
---|---|
satin finished (standard) | 769048 |
highly polished | 731048 |
(coloured) plastic powder - coating | 728048 |
Waste bin in stainless steel (AISI 304) for surface mounting or floor installation. All-stainless steel housing; all corners fully welded, visible surfaces satin finished and brushed. Equipped with removable mesh basket. Capacity approx. 36 l. Accessible through lockable door. On the top two-part self-closing and flame-retardant disposal flap. Keyed alike cylinder lock in corrosion-resistant zinc die-casting. Delivery includes fixing material.
Dimensions: 298 x 598 x 310 mm
Article No. WP180
748,00 €
WASTE BIN WP 181
298 x 598 x 308 mm
36 l
- Waste bin in robust, germ-reducing and easy-care stainless steel (AISI 304).
- All-stainless steel housing; all corners fully welded, visible surfaces satin finished and brushed.
Further available surfaces: see below. - Equipped with removable mesh basket. Capacity approx. 36 l.
Accessible through lockable door. - Also suitable for use as a hygiene waste bin with the optional plastic hygiene bin WP18.
- Keyed alike cylinder lock in corrosion-resistant zinc die-casting.
- Wear parts can be replaced as modules.
- With four rubber feet suitable for floor installation.
- Mounting: With four screws through key holes and one optional anti-theft hole in the back wall.
- Delivery includes fixing material.
- Weight (in kg): 9,6
AVAILABLE SURFACES | ORDER NUMBERS |
---|---|
satin finished (standard) | 769047 |
highly polished | 731047 |
(coloured) plastic powder - coating | 728047 |
Waste bin in stainless steel (AISI 304) for surface mounting or floor installation. All-stainless steel housing; all corners fully welded, visible surfaces satin finished and brushed. Equipped with removable mesh basket. Capacity approx. 36 l. Accessible through lockable door. Keyed alike cylinder lock in corrosion-resistant zinc die-casting. Delivery includes fixing material.
Dimensions: 298 x 598 x 310 mm
Article No. WP181
623,00 €
HYGIENE WASTE BIN WITH SANITARY BAG DISPENSER AND INSERTION SLUICE WP 177-1
220 x 344 x 115 mm
ca. 4 l
- Hygiene waste bin with sanitary bag dispenser and insertion sluice with vanity flap in robust, germ-reducing and easy-care stainless steel (AISI 304).
- All-stainless steel housing; visible surfaces satin finished and brushed.
Further available surfaces: see below. - Equipped with removable hygiene bin. Capacity approx. 4 l.
- Sanitary bag dispenser integrated on the side.
Designed for one standard box of plastic sanitary bags with dimensions of approx. 118 x 87 x 20 mm. - Accessible through hinged lid.
- Mounting: With four screws through key holes and one optional anti-theft hole in the back wall.
- Delivery includes fixing material and one box of plastic sanitary bags.
- Weight (in kg): 3,9
AVAILABLE SURFACES | ORDER NUMBERS |
---|---|
satin finished (standard) | 727240 |
highly polished | 732240 |
(coloured) plastic powder - coating | 729240 |
Hygiene waste bin with sanitary bag dispenser and insertion sluice with vanity flap in stainless steel (AISI 304) for surface mounting. All-stainless steel housing; visible surfaces satin finished and brushed. Equipped with removable hygiene bin. Capacity approx. 4 l. Sanitary bag dispenser integrated on the side. Accessible through hinged. Delivery includes fixing material and one box of plastic sanitary bags.
Dimensions: 220 x 344 x 115 mm
Article No. WP177-1
304,00 €
HYGIENE WASTE BIN WITH SANITARY BAG DISPENSER AND INSERTION SLUICE WP 177-1
220 x 344 x 115 mm
ca. 4 l
- Hygiene waste bin with sanitary bag dispenser and insertion sluice with vanity flap in robust, germ-reducing and easy-care stainless steel (AISI 304).
- All-stainless steel housing; visible surfaces satin finished and brushed.
Further available surfaces: see below. - Equipped with removable hygiene bin. Capacity approx. 4 l.
- Sanitary bag dispenser integrated on the side.
Designed for one standard box of plastic sanitary bags with dimensions of approx. 118 x 87 x 20 mm. - Accessible through hinged lid.
- Mounting: With four screws through key holes and one optional anti-theft hole in the back wall.
- Delivery includes fixing material and one box of plastic sanitary bags.
- Weight (in kg): 3,9
AVAILABLE SURFACES | ORDER NUMBERS |
---|---|
satin finished (standard) | 727240 |
highly polished | 732240 |
(coloured) plastic powder - coating | 729240 |
Hygiene waste bin with sanitary bag dispenser and insertion sluice with vanity flap in stainless steel (AISI 304) for surface mounting. All-stainless steel housing; visible surfaces satin finished and brushed. Equipped with removable hygiene bin. Capacity approx. 4 l. Sanitary bag dispenser integrated on the side. Accessible through hinged. Delivery includes fixing material and one box of plastic sanitary bags.
Dimensions: 220 x 344 x 115 mm
Article No. WP177-1
378,00 €
YGIENE WASTE BIN WITH INSERTION SLUICE WP 179-1
202 x 344 x 115 mm
ca. 4 l
- Hygiene waste bin with insertion sluice and vanity flap in robust, germ-reducing and easy-care stainless steel (AISI 304).
- All-stainless steel housing; visible surfaces satin finished and brushed.
Further available surfaces: see below. - Equipped with removable hygiene bin. Capacity approx. 4 l.
- Accessible through hinged lid.
- Mounting: With four screws through key holes and one optional anti-theft hole in the back wall.
- Delivery includes fixing material.
- Weight (in kg): 3,6
AVAILABLE SURFACES | ORDER NUMBERS |
---|---|
satin finished (standard) | 727250 |
highly polished | 734250 |
(coloured) plastic powder - coating | 729250 |
Hygiene waste bin with insertion sluice and vanity flap in stainless steel (AISI 304) for surface mounting. All-stainless steel housing; visible surfaces satin finished and brushed. Equipped with removable hygiene bin. Capacity approx. 4 l. Accessible through hinged lid. Delivery includes fixing material.
Dimensions: 202 x 344 x 115 mm
Article No. WP179-1
238,00 €
YGIENE WASTE BIN WITH INSERTION SLUICE WP 179-1
202 x 344 x 115 mm
ca. 4 l
- Hygiene waste bin with insertion sluice and vanity flap in robust, germ-reducing and easy-care stainless steel (AISI 304).
- All-stainless steel housing; visible surfaces satin finished and brushed.
Further available surfaces: see below. - Equipped with removable hygiene bin. Capacity approx. 4 l.
- Accessible through hinged lid.
- Mounting: With four screws through key holes and one optional anti-theft hole in the back wall.
- Delivery includes fixing material.
- Weight (in kg): 3,6
AVAILABLE SURFACES | ORDER NUMBERS |
---|---|
satin finished (standard) | 727250 |
highly polished | 734250 |
(coloured) plastic powder - coating | 729250 |
Hygiene waste bin with insertion sluice and vanity flap in stainless steel (AISI 304) for surface mounting. All-stainless steel housing; visible surfaces satin finished and brushed. Equipped with removable hygiene bin. Capacity approx. 4 l. Accessible through hinged lid. Delivery includes fixing material.
Dimensions: 202 x 344 x 115 mm
Article No. WP179-1
311,00 €
COMBINATION PAPER TOWEL DISPENSER AND WASTE BIN WP 501
298 x 645 x 164 mm
ca. 250 paper towels / 11 l
- Combination consisting of a paper towel dispenser and a waste bin in robust, germ-reducing and easy-care stainless steel (AISI 304).
- All-stainless steel housing; all corners fully welded, visible surfaces satin finished and brushed.
Further available surfaces: see below. - Paper towel dispenser with deep-drawn paper removal opening for easy paper removal.
- Designed for approx. 250 standard paper towels in zigzag- or c-fold. Paper size (folded): 240-250 mm x 100-115 mm. Accessible for refilling through lockable front flap.
- Waste bin equipped with removable mesh basket. Capacity approx. 11 l. Accessible through lockable door with self-closing, flame-retardant disposal flap.
- Keyed alike cylinder locks in corrosion-resistant zinc die-casting.
- Wear parts and front panels can be replaced as modules.
- Installation dimensions: 300 x 647 x 154 mm
- Mounting: With four screws in wall opening through fixing holes in the side walls.
- Delivery includes fixing material and one pack of paper towels.
- Weight (in kg): 8,5
623,00 €
Paper towel dispenser and Saniflow and Waste bin
The types of combined units provide:
It is entirely welded, with a paper towel dispenser with riveted tray that prevents tearing the paper; accepts C and Z folded paper towels. Saniflow® automatic hand dryer and AISI 304 stainless steel bin, which is extractible so that it may be easily dumped. Optionally, a frame is available for installing on a surface.
Paper towel dispensers + paper bins
Several solutions are provided in this category depending on the type of paper used, rolls or towels, and the capacity of the bin, which ranges from 6.1 litres to 53 litres. The paper loads range between 200 towels and 800 towels in models C/Z and 200 mm in diameter in models that use paper rolls.
1554,00 €
COMBINATION PAPER TOWEL DISPENSER AND WASTE BIN WP 545
298 x 1048 x 120 mm
ca. 500 paper towels / 11 l
- Combination consisting of a paper towel dispenser and a waste bin in robust, germ-reducing and easy-care stainless steel (AISI 304).
- All-stainless steel housing; all corners fully welded, visible surfaces satin finished and brushed.
Further available surfaces: see below. - Paper towel dispenser with deep-drawn paper removal opening for easy paper removal.
- Designed for approx. 500 standard paper towels in zigzag fold. Paper size (folded): 240-250 mm x 100-115 mm.
- Inspection slot to indicate fill level.
- Accessible for refilling through lockable front flap with fall protection.
- Waste bin equipped with removable mesh basket. Capacity approx. 11 l. Accessible through lockable door with self-closing, flame-retardant disposal flap.
- Keyed alike cylinder locks in corrosion-resistant zinc die-casting.
- Wear parts can be replaced as modules.
- Mounting: With four screws through key holes and one optional anti-theft hole in the back wall.
- Delivery includes fixing material and one pack of paper towels.
- Weight (in kg): 10,6
651,00 €
COMBINATION PAPER TOWEL DISPENSER AND WASTE BIN WP 545
298 x 1048 x 120 mm
ca. 500 paper towels / 11 l
- Combination consisting of a paper towel dispenser and a waste bin in robust, germ-reducing and easy-care stainless steel (AISI 304).
- All-stainless steel housing; all corners fully welded, visible surfaces satin finished and brushed.
Further available surfaces: see below. - Paper towel dispenser with deep-drawn paper removal opening for easy paper removal.
- Designed for approx. 500 standard paper towels in zigzag fold. Paper size (folded): 240-250 mm x 100-115 mm.
- Inspection slot to indicate fill level.
- Accessible for refilling through lockable front flap with fall protection.
- Waste bin equipped with removable mesh basket. Capacity approx. 11 l. Accessible through lockable door with self-closing, flame-retardant disposal flap.
- Keyed alike cylinder locks in corrosion-resistant zinc die-casting.
- Wear parts can be replaced as modules.
- Mounting: With four screws through key holes and one optional anti-theft hole in the back wall.
- Delivery includes fixing material and one pack of paper towels.
- Weight (in kg): 10,6
810,00 €
COMBINATION PAPER TOWEL DISPENSER AND WASTE BIN WP 511
298 x 645 x 164 mm
ca. 250 paper towels / 11 l
- Combination consisting of a paper towel dispenser and a waste bin in robust, germ-reducing and easy-care stainless steel (AISI 304).
- All-stainless steel housing; all corners fully welded, visible surfaces satin finished and brushed.
Further available surfaces: see below. - Paper towel dispenser with deep-drawn paper removal opening for easy paper removal.
- Designed for approx. 250 standard paper towels in zigzag- or c-fold.
Paper size (folded): 240-250 mm x 100-115 mm. Accessible for refilling through lockable front flap. - Waste bin equipped with removable mesh basket. Capacity approx. 11 l. Accessible through lockable door with self-closing, flame-retardant disposal flap.
- Keyed alike cylinder locks in corrosion-resistant zinc die-casting.
- Wear parts can be replaced as modules.
- Mounting: With four screws through key holes and one optional anti-theft hole in the back wall off-floor below vanity unit, or as an option with console or base for a surcharge.
- Delivery includes fixing material and one pack of paper towels.
- Weight (in kg): 8,5
AVAILABLE SURFACES | ORDER NUMBERS |
---|---|
satin finished (standard) | 728050 |
highly polished | 732050 |
(coloured) plastic powder - coating | 728137 |
Combination consisting of a paper towel dispenser and a waste bin in stainless steel (AISI 304) for under-counter mounting. All-stainless steel housing; all corners fully welded, visible surfaces satin finished and brushed. Paper towel dispenser with deep-drawn paper removal opening, filling quantity approx. 250 paper towels. Accessible for refilling through lockable front flap. Waste bin equipped with removable mesh basket. Capacity approx. 11 l. Accessible through lockable door with self-closing, flame-retardant disposal flap. Keyed alike cylinder locks in corrosion-resistant zinc die-casting. Delivery includes fixing material and one pack of paper towels.
Dimensions: 298 x 645 x 164 mm
Article No. WP511
635,00 €
COMBINATION PAPER TOWEL DISPENSER AND WASTE BIN WP 511
298 x 645 x 164 mm
ca. 250 paper towels / 11 l
- Combination consisting of a paper towel dispenser and a waste bin in robust, germ-reducing and easy-care stainless steel (AISI 304).
- All-stainless steel housing; all corners fully welded, visible surfaces satin finished and brushed.
Further available surfaces: see below. - Paper towel dispenser with deep-drawn paper removal opening for easy paper removal.
- Designed for approx. 250 standard paper towels in zigzag- or c-fold.
Paper size (folded): 240-250 mm x 100-115 mm. Accessible for refilling through lockable front flap. - Waste bin equipped with removable mesh basket. Capacity approx. 11 l. Accessible through lockable door with self-closing, flame-retardant disposal flap.
- Keyed alike cylinder locks in corrosion-resistant zinc die-casting.
- Wear parts can be replaced as modules.
- Mounting: With four screws through key holes and one optional anti-theft hole in the back wall off-floor below vanity unit, or as an option with console or base for a surcharge.
- Delivery includes fixing material and one pack of paper towels.
- Weight (in kg): 8,5
AVAILABLE SURFACES | ORDER NUMBERS |
---|---|
satin finished (standard) | 728050 |
highly polished | 732050 |
(coloured) plastic powder - coating | 728137 |
Combination consisting of a paper towel dispenser and a waste bin in stainless steel (AISI 304) for under-counter mounting. All-stainless steel housing; all corners fully welded, visible surfaces satin finished and brushed. Paper towel dispenser with deep-drawn paper removal opening, filling quantity approx. 250 paper towels. Accessible for refilling through lockable front flap. Waste bin equipped with removable mesh basket. Capacity approx. 11 l. Accessible through lockable door with self-closing, flame-retardant disposal flap. Keyed alike cylinder locks in corrosion-resistant zinc die-casting. Delivery includes fixing material and one pack of paper towels.
Dimensions: 298 x 645 x 164 mm
Article No. WP511
COMBINATION PAPER TOWEL DISPENSER AND WASTE BIN WP 520
298 x 596 x 310 mm
ca. 500 paper towels / 18 l
- Combination consisting of a paper towel dispenser and a waste bin in robust, germ-reducing and easy-care stainless steel (AISI 304).
- All-stainless steel housing; all corners fully welded, visible surfaces satin finished and brushed.
Further available surfaces: see below. - Paper towel dispenser with deep-drawn paper removal opening for easy paper removal.
- Designed for approx. 500 standard paper towels in zigzag- or c-fold. Paper size (folded): 240-250 mm x 100-115 mm. Accessible for refilling through lockable drawer.
- Waste bin equipped with removable mesh basket. Capacity approx. 18 l. Accessible through lockable door with self-closing, flame-retardant disposal flap.
- Keyed alike cylinder locks in corrosion-resistant zinc die-casting.
- Wear parts can be replaced as modules.
- Mounting: With four screws through key holes and one optional anti-theft hole in the back wall off-floor below vanity unit, or as an option with console or base for a surcharge.
- Delivery includes fixing material and one pack of paper towels.
- Weight (in kg): 11,9
AVAILABLE SURFACES | ORDER NUMBERS |
---|---|
satin finished (standard) | 727651 |
highly polished | 731651 |
(coloured) plastic powder - coating | 728132 |
Combination consisting of a paper towel dispenser and a waste bin in stainless steel (AISI 304) for under-counter mounting. All-stainless steel housing; all corners fully welded, visible surfaces satin finished and brushed. Paper towel dispenser with deep-drawn paper removal opening, filling quantity approx. 500 paper towels. Accessible for refilling through lockable drawer. Waste bin equipped with removable mesh basket. Capacity approx. 18 l. Accessible through lockable door with self-closing, flame-retardant disposal flap. Keyed alike cylinder locks in corrosion-resistant zinc die-casting. Delivery includes fixing material and one pack of paper towels.
Dimensions: 298 x 596 x 310 mm
Article No. WP520
709,00 €