Kõrged valamusegistid – sobivad pinnapealsetele valamutele
Kõrged valamusegistid – ideaalne valik pinnapealsetele valamutele
PEGU.ee valikust leiad laia valiku kõrgeid valamusegisteid, mis sobivad suurepäraselt pinnapealsetele valamutele – olgu tegu moodsa kodu, disainhotelli või kontoriga.
Kõik segistid on valmistatud vastupidavast materjalist, tagades pika eluea ja usaldusväärsuse igapäevases kasutuses. Valikus on klassikalised ja minimalistlikud disainid, mis sobivad igasse vannituppa.
Kvaliteet ja funktsionaalsus kohtuvad disainis:
-
Kõrge tila tagab mugava kasutuse ka sügavates valamutes
-
Sobivad pinnapealsetele valamutüüpidele (countertop)
-
Veesäästlikud ja vastupidavad
???? Saadaval brändidelt:
Damixa (Taani), Vola (Taani), Delabie (Prantsusmaa), Idral (Itaalia)
Kõik segistid vastavad Euroopa standarditele ning on loodud kestma ka intensiivsel kasutamisel.
❓ Otsid õiget toodet, kuid ei ole kindel, mis sobib?
PEGU.ee aitab valida – räägi otse eksperdiga, kellel on 25+ aastat kogemust segistite, dušisüsteemide ja aksessuaaride alal.
Küsi nõu
Sobib valamusegistile ARC
Damixa ARC 2982100 valamusegisti põhjaklapiga, kroom
Arc
Valamu/bideesegisti
- Artikli number 29821
- Viimistlused Kroom, Kroom/must
- Standardfunktsioonid
- Keraamiline tööorgan.
- Pööratava jooksutoru peaga.
- Klikk põhjaklapp.
- 3-suunaline jooksutoru pööramine.
Arc
Valamu/bideesegisti
- Artikli number 29821
- Viimistlused Kroom, Kroom/must
- Standardfunktsioonid
- Keraamiline tööorgan.
- Pööratava jooksutoru peaga.
- Klikk põhjaklapp.
- 3-suunaline jooksutoru pööramine.
Damixa kõrge valamusegisti Willow põhjaklapiga kroom LM
Willow
Valamusegisti
- Artikli number 35823
- Viimistlused Kroom
- Standardfunktsioonid
- Keraamiline tööorgan.
- Põletuskaitsega
- Veesäästu funktsioon Eco-Save.
- Klikk põhjaklapp.
- Kummiaeraator – lihtne puhastada.
294,75 €
Damixa Silhouet valamusegisti-LARGE , harjatud grafiithall PVD
Standardomadused:
Keraamiline tööorgan. 6l/min aerator
Silhouet
Halskov & Dalsgaard
Standardomadused:
Keraamiline tööorgan
Külm start
Kummiaeraator - lihtne puhastada Veesäästu funktsioon Eco-Save 6l/min aerator
SILHOUET
Basin Mixer - Large brushed brass pvd
7401379
Brushed Brass PVD
Silhouet
Halskov & Dalsgaard
5708516827863
SILHOUET
Basin Mixer - Large brushed copper pvd
7401387
Brushed Copper PVD
Silhouet
Halskov & Dalsgaard
5708516827870
SILHOUET
Valamusegisti - LARGE
Kroom
Silhouet
Halskov & Dalsgaard
SILHOUET
Valamusegisti - LARGE
Kuld
Silhouet
Halskov & Dalsgaard
SILHOUET
Valamusegisti - LARGE
Must
Silhouet
Halskov & Dalsgaard
SILHOUET
Valamusegisti - Large mat valge
7401321
Mat valge
Silhouet
Standardomadused:
1 käepide
Keraamiline tööorgan
Külm start
Kummiaeraator - lihtne puhastada Veesäästu funktsioon Eco-Save 6l/min aerator
Slim. Scandinavian. Attractive.
With its pure, inviting design Silhouet fits beautifully in the kitchens and bathrooms of today as well as tomorrow. For the bathroom sink, Silhouet is available in three different heights to ensure you can also use it with a tall, tabletop mounted vessel sink. The stylish Silhouet shower system features a showerhead that due to its ultra slim design appears to hover for an even more sophisticated look. Silhouet is the essence of timeless Scandinavian design and outstanding Damixa quality.
SILHOUET
Valamusegisti - LARGE
Teras PVD
Silhouet
Halskov & Dalsgaard
BINOPTIC MIX electronic mixer
Ref. 488MCHLH
Deck-mounted electronic basin mixer:
Independent IP65 electronic control unit.
123 6V Lithium batteries.
Flow rate pre-set at 3 lpm at 3 bar, can be adjusted from 1.5 - 6 lpm.
Scale-resistant flow straightener.
Adjustable duty flush (pre-set flush 60 seconds every 24 hours after last use).
Active, infrared presence detection, sensor at the end of the spout optimises detection.
Chrome-plated brass body.
PEX flexibles with filters and solenoid valves M⅜".
Fixing reinforced by 2 stainless steel rods.
Anti-blocking security.
Spout with smooth interior and low water volume (reduces bacterial development).
Side temperature control with adjustable maximum temperature and ergonomic LH lever.
Drop height 170mm for semi-recessed washbasins.
Suitable for people with reduced mobility.
TECHNICAL FEATURES
BINOPTIC MIX electronic mixer
Ref. 488MCHLH
| Supply | 6V batteries |
|---|---|
| Connector | M3/8" |
| Technology | Electronic |
| Drop height | 170mm |
| Spout length | 175mm |
| Flow rate | 3 lpm |
BINOPTIC MIX electronic mixer
Ref. 488MCHLH15
Deck-mounted electronic basin mixer:
Independent IP65 electronic control unit.
123 6V Lithium batteries.
Flow rate pre-set at 3 lpm at 3 bar, can be adjusted from 1.5 - 6 lpm.
Scale-resistant flow straightener.
Adjustable duty flush (pre-set flush 60 seconds every 24 hours after last use).
Active, infrared presence detection, sensor at the end of the spout optimises detection.
Chrome-plated brass body.
PEX flexibles with filters and solenoid valves Ø 15mm.
Fixing reinforced by 2 stainless steel rods.
Anti-blocking security.
Spout with smooth interior and low water volume (reduces bacterial development).
Side temperature control with adjustable maximum temperature and ergonomic LH lever.
Drop height 170mm for semi-recessed washbasins.
Suitable for people with reduced mobility.
TECHNICAL FEATURES
BINOPTIC MIX electronic mixer
Ref. 488MCHLH15
| Supply | 6V batteries |
|---|---|
| Connector | M1/2'' Ø 15 |
| Technology | Electronic |
| Drop height | 170mm |
| Spout length | 175mm |
| Flow rate | 3 lpm |
BINOPTIC MIX electronic mixer
Ref. 498MCHLH
Deck-mounted electronic basin mixer:
Independent IP65 electronic control unit.
123 6V Lithium batteries.
Flow rate pre-set at 3 lpm at 3 bar, can be adjusted from 1.5 - 6 lpm.
Scale-resistant flow straightener.
Adjustable duty flush (pre-set flush 60 seconds every 24 hours after last use).
Active, infrared presence detection, sensor at the end of the spout optimises detection.
Chrome-plated brass body.
PEX flexibles with filters and solenoid valves M⅜".
Fixing reinforced by 2 stainless steel rods.
Anti-blocking security.
Spout with smooth interior and low water volume (reduces bacterial development).
Side temperature control with adjustable maximum temperature and ergonomic LH lever.
Drop height 250mm for counter-top washbasins.
Suitable for people with reduced mobility.
TECHNICAL FEATURES
BINOPTIC MIX electronic mixer
Ref. 498MCHLH
| Supply | 6V batteries |
|---|---|
| Connector | M3/8" |
| Technology | Electronic |
| Drop height | 250mm |
| Spout length | 185mm |
| Flow rate | 3 lpm |
BINOPTIC MIX electronic mixer
Ref. 498MCHLH15
Deck-mounted electronic basin mixer:
Independent IP65 electronic control unit.
123 6V Lithium batteries.
Flow rate pre-set at 3 lpm at 3 bar, can be adjusted from 1.5 - 6 lpm.
Scale-resistant flow straightener.
Adjustable duty flush (pre-set flush 60 seconds every 24 hours after last use).
Active, infrared presence detection, sensor at the end of the spout optimises detection.
Chrome-plated brass body.
PEX flexibles with filters and solenoid valves Ø 15mm for compression fittings.
Fixing reinforced by 2 stainless steel rods.
Anti-blocking security.
Spout with smooth interior and low water volume (reduces bacterial development).
Side temperature control with adjustable maximum temperature and ergonomic LH lever.
Drop height 250mm for counter-top washbasins.
Suitable for people with reduced mobility.
TECHNICAL FEATURES
BINOPTIC MIX electronic mixer
Ref. 498MCHLH15
| Supply | 6V batteries |
|---|---|
| Connector | M1/2'' Ø 15 |
| Technology | Electronic |
| Drop height | 250mm |
| Spout length | 185mm |
| Flow rate | 3 lpm |
TEMPOMATIC MIX PRO electronic mixer
Ref. 495257
Deck-mounted electronic basin mixer:
Independent IP65 electronic control unit.
Battery-operated with 123 6V Lithium batteries.
Flow rate pre-set at 4 lpm at 3 bar, can be adjusted from 1.5 - 6 lpm.
Scale-resistant flow straightener.
Adjustable duty flush (pre-set flush ~60 seconds every 24 hours after last use).
Shock-resistant infrared presence detection sensor.
Chrome-plated solid brass body with fixing reinforced by 2 stainless steel rods.
PEX flexibles with filters and solenoid valves M3/8".
Swivelling spout with smooth interior (reduces bacterial development).
Removable spout for cleaning.
Anti-blocking security.
Side temperature control with ergonomic long lever and adjustable maximum temperature limiter.
Solenoid valves upstream of the mixing chamber.
Suitable for people with reduced mobility.
TECHNICAL FEATURES
TEMPOMATIC MIX PRO electronic mixer
Ref. 495257
| Supply | 6V battery |
|---|---|
| Connector | M3/8" |
| Technology | Electronic |
| Drop height | 310mm |
| Spout length | 200mm |
| Flow rate | 4 lpm |
TEMPOMATIC MIX PRO electronic mixer
Ref. 49525715
Deck-mounted electronic basin mixer:
Independent IP65 electronic control unit.
Battery-operated with 123 6V Lithium batteries.
Flow rate pre-set at 4 lpm at 3 bar, can be adjusted from 1.5 - 6 lpm.
Scale-resistant flow straightener.
Adjustable duty flush (pre-set flush ~60 seconds every 24 hours after last use).
Shock-resistant infrared presence detection sensor.
Chrome-plated solid brass body with fixing reinforced by 2 stainless steel rods.
PEX flexibles with filters, solenoid valves Ø 15mm for compression fittings.
Swivelling spout with smooth interior (reduces bacterial development).
Removable spout for cleaning.
Anti-blocking security.
Side temperature control with with adjustable maximum temperature limiter and long lever.
Suitable for people with reduced mobility.
TECHNICAL FEATURES
TEMPOMATIC MIX PRO electronic mixer
Ref. 49525715
| Supply | 6V battery |
|---|---|
| Connector | M1/2'' Ø 15mm |
| Technology | Electronic |
| Drop height | 310mm |
| Spout length | 200mm |
| Flow rate | 4 lpm |
Delabie kontaktivaba elektrooniline segisti 250mm 398MCHB M3/8" BINOPTIC MIX 230/12V matt mustBLACK BINOPTIC MIX electronic mixer
Ref. 398MCHB
Independent IP65 electronic control unit.
230/12V mains supply with transformer.
Flow rate pre-set at 3 lpm at 3 bar, can be adjusted from 1.4 - 6 lpm.
Scale-resistant flow straightener.
Adjustable duty flush (pre-set flush 60 seconds every 24 hours after last use).
Active, infrared presence detection, sensor at the end of the spout optimises detection.
Chrome-plated brass body.
Matte black chrome finish
PEX flexibles with filters and solenoid valves M⅜".
Fixing reinforced by 2 stainless steel rods.
Anti-blocking security.
Spout with smooth interior and low water volume (reduces bacterial development).
Side temperature control with adjustable maximum temperature limiter and long lever.
Drop height 250mm for countertop washbasins.
Suitable for people with reduced mobility.
TECHNICAL CHARACTERISTICS
BLACK BINOPTIC MIX electronic mixer
Ref. 398MCHB| Supply | Mains supply 230/12V |
| Connector | M3/8" |
| Technology | Electronic |
| Drop height | 250mm |
| Spout length | 185mm |
| Flow rate | 3 lpm |
| Finish | Matte black chrome |
Delabie kontaktivaba elektrooniline segisti 250mm 498MCHB M3/8" BINOPTIC MIX 6V matt must
BLACK BINOPTIC MIX electronic mixer
Ref. 498MCHB
Independent IP65 electronic control unit.
123 6V Lithium batteries.
Flow rate pre-set at 3 lpm at 3 bar, can be adjusted from 1.4 - 6 lpm.
Scale-resistant flow straightener.
Adjustable duty flush (pre-set flush 60 seconds every 24 hours after last use).
Active, infrared presence detection, sensor at the end of the spout optimises detection.
Chrome-plated brass body.
Matte black chrome finish.
PEX flexibles with filters and solenoid valves M⅜".
Fixing reinforced by 2 stainless steel rods.
Anti-blocking security.
Spout with smooth interior and low water volume (reduces bacterial development).
Side temperature control with adjustable maximum temperature and long lever.
Drop height 250mm for counter-top washbasins.
Suitable for people with reduced mobility.
TECHNICAL CHARACTERISTICS
BLACK BINOPTIC MIX electronic mixer
Ref. 498MCHB| Supply | 6V batteries |
| Connector | M3/8" |
| Technology | Electronic |
| Drop height | 250mm |
| Spout length | 185mm |
| Flow rate | 3 lpm |
| Finish | Matte black chrome |
CURVE series electronic basin mixer with infrared sensor and extension. 230V mains supply
Extension H=150 mm included
Mechanical mixing with side lever
Infrared sensor with activation on presence detection
Vandal proof stop after 1 min of continuous flow
Automatic anti-legionella water flow every 24h after last use
External power supply 230V AC/6V DC, protection grade IP65; cable with European plug (C); anti black-out device to ensure the shut off of the tap even in case power cut
6V “Micro“ solenoid valve (internal)
CURVE series electronic basin mixer with infrared sensor and extension. Battery operated
Extension H=150 mm included
Mechanical mixing with side lever
Infrared sensor with activation on presence detection
Vandal proof stop after 1 min of continuous flow
Automatic anti-legionella water flow every 24h after last use
Long-life 6V lithium battery (220,000 cycles)
Sealed battery box for installation under basin
HV1+170
Pipe size: 10 mm.
Hole cut out size: 32 mm.
HV1+170
Pipe size: 10 mm.
Hole cut out size: 32 mm.
HV1+170
Pipe size: 10 mm.
Hole cut out size: 32 mm.
> Working pressure :
1 to 5 bar
> Flow :
3 l/min with integrated flow limiter
High quality anti-limescale aerator (new aerator since June 2016) Anti-water-hammering design
> Hydraulic supply :
G 3/8" (12x17)
> Power supply :
6 V lithium battery (CRP2 type) in a casing placed within the tap body
> Material and colour finish :
Chrome-plated metal alloy components
Injected molded metal body and cover
150mm extended body
Distance from the base up to the detection cell: 205 mm
> Thermal resistance :
Resistant to a temperature of 75°C for 30-minute-thermal-shocks
> Security :
Temperature limiting system to avoid any risk of scalding
Anti-overflow security time: 30 seconds
Anti-blocking system preventing the water to flow continuously
Solenoid valve automatically shut down in case of power shortage or in case of sensor degradation
> Delivered with :
Instruction manual
2 Fastening nuts
1 Gasket and 1 Washer
2 PEX flexible hoses with F 3/8'' nut (12x17) and NF non-return valve 2 Straight stop valves G 3/8" (12x17)
2 Filter gaskets
> Standards & approvals :
Molded chrome-plated body in accordance with EN 12540
200-hour neutral salt spray resistant (NSS) in accordance with ISO 9227
> Working pressure :
1 to 5 bar
> Flow :
3 l/min with integrated flow limiter
High quality anti-limescale aerator (new aerator since June 2016) Anti-water-hammering design
> Hydraulic supply :
G 3/8’’ (12x17)
> Power supply :
6 V lithium battery (CRP2 type) in a casing placed within the tap body
> Material and colour finish :
Chrome-plated metal alloy components
Injected molded metal body and cover
Distance from the base up to the detection cell: 205 mm Black cover
> Thermal resistance :
Resistant to a temperature of 75°C for 30-minute-thermal-shocks
> Security :
Temperature limiting system to avoid any risk of scalding
Anti-overflow security time: 30 seconds
Anti-blocking system preventing the water to flow continuously
Solenoid valve automatically shut down in case of power shortage or in case of sensor degradation
> Delivered with :
Instruction manual
2 Fastening nuts
1 Gasket and 1 Washer
2 PEX flexible hoses with F 3/8'' nut (12x17) and NF non-return valve 2 Straight stop valves G 3/8" (12x17)
2 Filter gaskets
> Standards & approvals :
Molded chrome-plated body in accordance with EN 12540
200-hour neutral salt spray resistant (NSS) in accordance with ISO 9227
> Working pressure :
1 to 5 bar
> Flow :
3 l/min with integrated flow limiter
High quality anti-limescale aerator (new aerator since June 2016) Anti-water-hammering design
> Hydraulic supply :
G 3/8’’ (12x17)
> Power supply :
6 V lithium battery (CRP2 type) in a casing placed within the tap body
> Material and colour finish :
Chrome-plated metal alloy components
Injected molded metal body and cover
Distance from the base up to the detection cell: 205 mm White cover
> Thermal resistance :
Resistant to a temperature of 75°C for 30-minute-thermal-shocks
> Security :
Temperature limiting system to avoid any risk of scalding
Anti-overflow security time: 30 seconds
Anti-blocking system preventing the water to flow continuously
Solenoid valve automatically shut down in case of power shortage or in case of sensor degradation
> Delivered with :
Instruction manual
2 Fastening nuts
1 Gasket and 1 Washer
2 PEX flexible hoses with F 3/8'' nut (12x17) and NF non-return valve 2 Straight stop valves G 3/8" (12x17)
2 Filter gaskets
> Standards & approvals :
Molded chrome-plated body in accordance with EN 12540
200-hour neutral salt spray resistant (NSS) in accordance with ISO 9227
BASIN TAP WA 110
Ø 45 x 283 x 155 mm
normal pressure
- Single-lever basin tap without waste fitting in robust, germ-reducing and easy-care stainless steel (AISI 303).
- Version: normal pressure. Operating pressure 2–6 bar.
- Solid stainless steel body; visible surfaces satin finished.
Further available surfaces: see below. - High quality ceramic mixer cartridge with adjustable temperature limit setting (scald protection).
- Neoperl® air bubble spray M21 x 1 mm.
- Design height: 283 mm
Outlet height: 199 mm
Projection: 98 mm
Length of lever: 40 mm - Wear parts can be replaced as modules.
- Installation dimensions: Ø 33-40 mm
Surface thickness max. 40 mm - Mounting: With one counternut.
- Delivery includes fixing material and two flexible connecting hoses clad in stainless steel.
- Weight (in kg): 1,70
| AVAILABLE SURFACES | ORDER NUMBERS |
|---|---|
| satin finished (standard) | 925266 |
| highly polished | 932266 |
Single-lever basin tap in stainless steel (AISI 303) for counter mounting. Version: normal pressure. Solid stainless steel body; visible surfaces satin finished. Ceramic mixer cartridge with adjustable temperature limit setting. Delivery includes fixing material and two flexible connecting hoses clad in stainless steel.
Dimensions: Ø 52 x 283 x 155 mm
Outlet height 199 mm
Projection 98 mm
Length of lever 40 mm
Article No. WA110
BASIN TAP WA 110
Ø 45 x 283 x 155 mm
normal pressure
- Single-lever basin tap without waste fitting in robust, germ-reducing and easy-care stainless steel (AISI 303).
- Version: normal pressure. Operating pressure 2–6 bar.
- Solid stainless steel body; visible surfaces satin finished.
Further available surfaces: see below. - High quality ceramic mixer cartridge with adjustable temperature limit setting (scald protection).
- Neoperl® air bubble spray M21 x 1 mm.
- Design height: 283 mm
Outlet height: 199 mm
Projection: 98 mm
Length of lever: 40 mm - Wear parts can be replaced as modules.
- Installation dimensions: Ø 33-40 mm
Surface thickness max. 40 mm - Mounting: With one counternut.
- Delivery includes fixing material and two flexible connecting hoses clad in stainless steel.
- Weight (in kg): 1,70
| AVAILABLE SURFACES | ORDER NUMBERS |
|---|---|
| satin finished (standard) | 925266 |
| highly polished | 932266 |
Single-lever basin tap in stainless steel (AISI 303) for counter mounting. Version: normal pressure. Solid stainless steel body; visible surfaces satin finished. Ceramic mixer cartridge with adjustable temperature limit setting. Delivery includes fixing material and two flexible connecting hoses clad in stainless steel.
Dimensions: Ø 52 x 283 x 155 mm
Outlet height 199 mm
Projection 98 mm
Length of lever 40 mm
Article No. WA110
