Professionaalsed lahendused avalikuks ja erikasutuseks

Profesionaalne Santehnika

PEGU.ee tootegrupp „Professionaalsed lahendused avalikuks ja erikasutuseks“ pakub spetsiaalselt valitud sanitaar- ja sisustustooteid asutustele, kus loevad funktsionaalsus, vastupidavus ja hügieen. Siit leiad:

Invaabivahendid vannituppa ja duši alla
Meditsiiniasutuste sanitaartehnika (valamud, segistid, hädaabidušid)
Tööstuslikud ja majandusvalamud koristus- ja tööruumidesse
Avaliku ruumi sisustus ja turvatarvikud – käepidemed, piirajad, SOS-lahendused
Segistid professionaalse köögi jaoks, kus tähtsad on ergonoomika ja veekulu optimeerimine
Dušipaneelid SPA ja basseini tarbeks, kus veekindlus ja disain käivad käsikäes

Meie valik vastab kõrgetele hügieeni- ja ohutusnõuetele ning sobib kasutamiseks haiglates, hooldekodudes, haridusasutustes, spaa- ja basseinikeskustes, tööstusruumides ja avalikes tualettides.

Vaata lisaks Professionaalsed lahendused avalikuks ja erikasutuseks

Vaata lisaks Prügikastid, Siseprügikastid, Väliprügikastid | PEGU.ee

Kõik PEGU.ee tooted – segistid, dušisüsteemid ja vannitoa tarvikud – on valitud spetsialisti poolt, kellel on üle 25 aasta kogemust sanitaartehnika ja sisustuse valdkonnas.

PEGU.ee asutaja Aleksandr Gumenjuk tunneb isiklikult iga meie toodet ning annab nõu mitte robotina, vaid inimesena, kes oskab soovitada sobivaima lahenduse nii koju kui professionaalsetele projektidele.

Alamgrupid

Laost otsas

Pesurenn Intra 1500 mm roostevabast terasest pritsmislekiga ja konsoolidega

P3

Flexible wash trough supplied with integrated wall brackets.
Inner corners with more than 90° angle, and pressed drain without screws and gasket ensure optimum hygiene and easy cleaning. The sink has a fall against the drain in the center. Soft transitions at all external angles counteract damage in the event of a fall against the trough. Safe and comfortable handle support at the bottom of the edges to prevent injury during assembly. The bowl has enough depth to accommodate a bucket.
Meets all requirements in EN 14296.

Washtroughs available in standard lengths 600, 1200, 1500, 1800, 2100, 2400, 2800 and 3000 mm.
Washtroughs also available in any customer specified length between 600 and 3000. Art. Nr: P3-Flex

Tootekood: I-P3 1500mm , Tarneaeg: 14-21 päeva , Viimistlus:

1281,00 €

Lisa soovikorvi

Võrdle

Laost otsas

Pesurenn Intra 600 mm roostevabast terasest pritsmislekiga ja konsoolidega

P3

Tootekood: I-P3 600mm , Tarneaeg: 14-21 päeva , Viimistlus:

909,00 €

Lisa soovikorvi

Võrdle

Laost otsas

2-ne Valamu jalaga 1200x700, kõrgus 850mm , R/V teras

Нержавеющая большегрузная двойная мойка на ножках, 1200 x 700 x 850 мм

Характеристики

stainless steel bulk double-sink with a sheating
without a tap hole (could be made to order)
possibility of fine plane regulation by the regulation screws on the supporting legs
possibility to order inner sinks in dimensions: 400 x 300 x 200 mm/ 400 x 400 x 250 mm/ 400 x 400 x 200 mm
available also in the length 1400 mm
material CrNi 18/10 (AISI-304)
brushed finish
different dimensions could be made to order

Арт. №	93160
Название	SLUN 16

Tootekood: SA-SLUN16 , Tarneaeg: 3-5 nädalad , Viimistlus:

2745,00 €

Aasia WC, R/V teras AISI 304

Tootekood: PPT , Tarneaeg: 7-21 päeva , Viimistlus:

549,00 €

Lisa soovikorvi

Võrdle

Laost otsas

Aiakraani käepide, FM Mattson külm vesi

Headwork

Article number: 35051810

Description: Olive, CW

Tootekood: FMA-35051810 , Tarneaeg: 4-5 nädala , Viimistlus:

27,00 €

Lisa soovikorvi

Võrdle

Laost otsas

Aiakraani käepide, FM Mattson soe vesi

Headwork

Article number: 35051811

Description: Olive, HW

Tootekood: FMA-35051811 , Tarneaeg: 4-5 nädala , Viimistlus:

27,00 €

Akuga aiaprits 1937 Finland 5L

Akuga aiaprits 5l

Taimekaitsevahendite ja leheväetiste pritsimiseks koduaias ja väiksemas istanduses

AKUPRITS

micro USB

Taimede pritsimiseks ja umbrohutõrjeks koduaedades.

Paak on valmistatud kvaliteetsest, kemikaalikindlast plastikust.

Töörõhk 1,7 - 2 bar.

Teleskoopiline metallist voolik 36-60cm

Reguleeritav pihustusnurk 0-90 °

Maksimaalne voolukiirus 0,3 l / min.

Ühendusvooliku pikkus 150cm

Õlarihm

Liitiumioonaku laadimine laadijast

Täislaadimine võtab 4 tundi.

Pidev töö ühe laadimisega kuni 120 minutini

Aku taseme indikaator

Taimede jootmise protsessi täiesti uus kvaliteet.

Nüüd on see koos juhtmeta pritsidega FINLAND 1937 ja 1938 mõnus jalutuskäik teie aias. Kõik, mida peate tegema, on reguleerida pihustusnurka ja vajutada nuppu. Pole vaja segada ja jälgida silindris olevat rõhku, keerake lihtsalt voolik õiges suunas. Pihusti rõõmustab teid säästlikkusega: see täidab täidetud lahuse täielikult kuni viimase tilgani. Nautige FINLAND.

Опрыскиватель FINLAND 1937 5 л

Для опрыскивания растений и борьбы с сорняками в приусадебных участках.

Бак из высококачественного пластика, устойчивого к химическому воздействию.
Рабочее давление 1.7 - 2 бар.
Телескопический металлический брандспойт 36-60см
Регулируемый угол распыления 0-90°
Максимальный расход жидкости 0,3л/мин.
Длина соединительного шланга 150см
Плечевой ремень

Зарядка Li-Ion аккумулятора от зарядного устройства
Продолжительность полной зарядки – 4 часа.
Непрерывная работа от одного заряда до 120 минут
Индикатор уровня заряда аккумулятора

Tootekood: FIN-FBSPR5L , Tarneaeg: 7-14 päeva , Viimistlus:

71,20 € (20%)
89,00 €

Akuga aiaprits FBSPR2L Finland 2L

Taimekaitsevahendite ja leheväetiste pritsimiseks koduaias ja väiksemas istanduses

AKUPRITS

micro USB

Taimede pritsimiseks ja umbrohutõrjeks koduaedades.

Li-ion akuga väike aiaprits 2l.

Sobib toa- ja aiataimede hooldamiseks.Samuti rinevate pindade, seinte ning klaasi töötlemiseks ja puhastamiseks.
• Tööaeg ühe laadimisega kuni 120 minutit.
• Maksimaalne vedeliku tarbimine 0.2 l/min.

Tootekood: FIN-FBSPR2L , Tarneaeg: 7-14 päeva , Viimistlus:

44,00 € (20%)
55,00 €

Lisa soovikorvi

Võrdle

Laost otsas

Ämbrirest valamule Intra U2

Tootekood: I-URIST2-1 , Tarneaeg: 7-14 päeva , Viimistlus:

122,00 €

Lisa soovikorvi

Võrdle

Laost otsas

Ämbrirest valamule Intra U4

Tootekood: I-URIST4-1 , Tarneaeg: 7-14 päeva , Viimistlus:

122,00 €

Lisa soovikorvi

Võrdle

Laos

Anti-corrosive hädaabidušš SOS silmadušš 2-ne, seinale kinnituv, valamuga 3/4"

Tootekood: B-17528004 , Tarneaeg: 7-14 päeva , Viimistlus:

835,00 €

Lisa soovikorvi

Võrdle

Laost otsas

Antivandaalne Peegel R/V teras 385x485 AISI304

Stainless steel rectangular mirror, H. 500mm
Ref. 3452

Depth	10mm
Length	Unbreakable mirror
Width	385mm
Drop height	485mm
Finish	"Mirror" polished 304 stainless steel

Tootekood: DE-3452 , Tarneaeg: 7-21 päeva , Viimistlus:

275,00 €

Lisa soovikorvi

Võrdle

Laost otsas

Antivandaalne R/V teras piezo dušisi nupp, eelsegatud veele, ilma el.adaptorita

	AUS 11 Pressure button-controlled shower for heat regulated water

AUS 11 is a new type of shower fitting for single shower control. The fitting is designated for premixed water – with one water inlet and shower outlet elbow. Water is released and closed by an anti-vandal pressure button connected to electronics and an electromagnetic valve. The fitting is covered by a rust-free anti-vandal cover to prevent damage.

The mounting system has been designed so as to make removing the cover without using tools impossible with no bolt or screw being visible. The cover can be "pushed into" the wall level even if the mount box has been walled to an incorrect depth.

AUS 11 is identical to AUS 1P with a different design and very resistant cover sheet.

Electronics can work in two modes:

1) The button works on the START/STOP basis – water release/closing. If the water is not turned off upon the time adjusted by the user or manager (e.g. 20 seconds), the electronic system itself instructs water stopping. The user must press again to start water running. This significantly saves water as the user reduces the showering time.

2) The button works on the START/STOP basis. After the time adjusted by the manager (e.g. 3 minutes) expires there is a forced break when water cannot be released. During this time, the user is forced to leave the shower or wait. This prevents needless showering – water wasting.

Basic technical information
Water input:	G 1/2“
Water pressure:	1 - 10 Bar (0,1 – 1,0 MPa)
Time of water flow:	10 s – 42,5 min in mode 1
	0 s - 42,5 min in mode 2
Power supply:	12 V, 50 Hz
Power requirement:	6 VA
Source of power supplz:	ZAC 1/20 (max. 3× AUS 11)
	ZAC 1/50 (max. 8× AUS 11)
Weight:	2,0 kg

Requirements for setting up the construction
Water installation set up as per picture Set-up alcove 150 x 75 mm for installation casket Set-up cable for power supply – 12 V, 50 Hz from source of power supply ZAC

Complete delivery
installation casket input and output bolting electromagnetic valve spherical valve covering metal plate with piezo button electronics

Made to order
SP 1 – shower arm with water flow of 9 l/min SP 2 – shower arm with water flow of 7 l/min SP 3 – shower arm with water flow of 7 l/min ZAC - source of power supply 12V, 50Hz

Figure

A -	water inlet G 1/2"
C -	electricity supply cable 12 V, 50 Hz
G -	water outlet into shower armG 1/2"

Download information about the product
AUS 11 data for projectants - ( 84 kB )

Tootekood: AZP-AUS 11 , Tarneaeg: 3-4 nädalad , Viimistlus:

375,00 €

Lisa soovikorvi

Võrdle

Laost otsas

Antivandaalne valamu + seebidosaator + termostaat + kätekuivati

AUM 026 INV is a stainless steel, partly wall-built in washbasin, containing the combination of a liquid soap dispenser, water tap and hand dryer in a small space. The washbasin is adjusted to be used also by wheelchair persons – it is shallow, completed with handles, the waste is hidden behind the wall. Controlled by durable piezo-pushbuttons, electronically controlled turn-off (the period of water running is settable by the owner). The washbasin is to be mounted through the wall, all technology components are behind the wall, and thus cannot be damaged by users (anti-vandal design).

A wall-hanged version may be supplied to order, or a version without any of the functions (e.g. onlz water plus soap, or water plus dryer). The washbasin is made of AISI 304 stainless steel. A recommended cleaning agent for stainless products maintenance: Würth – preservation (order no. 0893 121 K), cleaning (order no. 893 121 1).

Basic technical information
Power supply:	230 V, 50 Hz
IP protection:	IP 55
Dimensions (visible from outside):	800 x 800 x 363 mm
Required thickness of wall:	min. 100 mm
Outlet:	d = 40 mm

Requirements for setting up the construction
Opening in the wal 740 x 740 mm Prepared el. supply cable 3C x 1,5 s 230 V, 50 Hz Prepared water outlet according to technical scheme

Complete delivery
Stainless-steel washbasin with handles Electronic hand dryer Electronic soap dispenser Electronic water tap Through-wall frame with bolts Waste with a stink trap 230V / 12V source for the electronics

Tootekood: AZP-AUM 026.TV INV , Tarneaeg: 3-4 nädalad , Viimistlus:

4300,00 €

Lisa soovikorvi

Võrdle

Laost otsas

Antivandaalne WC pott INVA R/V taras

Antivandaalne WC pott INVA R/V taras

AUZ 08 INV is a stainless-steel WC in matt design for the disabled. It is a stainless-steel toilet to stand on the floor at the wall. The drain is directed backwards (the bottom drain version AUZ 02 INV). The closet is based on the standard AUZ 08, which is heightened and lengthened to fulfil the directive regarding products for disabled persons. To increase the user comfort, the seating part is provided with a seat from hardened plastic. The closet includes a removable backrest recommended by the League for the rights of the wheelchair bound.

The standing WC is suitable for places where the common closet cannot be attached to the side wall, because of a thin bearing particle, for example.

It is suitable to supplement the closet with an automatic pressure-water flushing device with delayed flushing AUZ 3 INV (suitable for the disabled) or any flushing device with a cistern.

Basic technical information
Water inlet:	d= 34 - 50 mm
Min. water flow:	70 l/min
Outlet:	d= 90 mm
Weight:	27 kg

Complete delivery
Stainless steel closet Plastic seat Anchoring material Stainless-steel backrest

Tootekood: AZP-AUZ 08 INV , Tarneaeg: 3-4 nädalad , Viimistlus:

2629,00 €

Lisa soovikorvi

Võrdle

Laost otsas

Antivandaalne WC pott R/V taras

	AUZ 08 stainless-steel standing closet, with hardened seat, back drain

AUZ 08 is a stainless-steel WC in matt design. To increase the user comfort, it is provided with a grey seat with a lid made of hardened plastic (newly also with a seat in black design AUZ 08.CS). AUZ 08 is designed to stand on the floor at the wall; it is suitable for places where the common closet cannot be attached to the wall, because of a thin bearing particle, for example. The standard version of AUZ 08 has a back drain (the version with the bottom drain AUZ 02). It is suitable to supplement the WC with the automatic pressure water flushing device AUZ 3, automatic flushing device with the piezo button AUZ 3.P (or the vandal-resistant flushing device BSAZ 01) or any flushing device with a cistern.

Thanks to its resistance to damage, the closet is primarily intended for social facilities with demanding operation, such as highway lay-byes, alehouses, etc., where easy maintenance of sanitary conditions is required. WC is also manufactured in the design for the disabled under the designation AUZ 08 INV.

Further closet versions can be found in the section Stainless-steel closets or Stainless-steel safety closets.

Basic technical information
Water inlet:	d= 34-50 mm
Min. water flow:	70 l/min
Outlet:	d= 90 mm
Weight:	23 kg

Requirements for setting up the construction
Set-up outlet d = 110 mm including rubber sleeve for pipe d = 90 mm. Set-up water inlet d= 34-50 mm according to chosen sealing.

Complete delivery
Stainless steel closet Plastic seat Anchoring material

Made to order
AUZ 3 - automatic pressure flushing system AUZ 3.P - automatic pressure flushing system with piezo control BSAZ 01 - vandal resistant pressure flushing system

Tootekood: AZP-AUZ 08 , Tarneaeg: 3-4 nädalad , Viimistlus:

2452,00 €

Lisa soovikorvi

Võrdle

Laost otsas

Automaatne trummel voolikuga ja pihustiga L. 15m. Maksimaalne temperatuur 70°C

DESCRIPTION

Auto-rewind 304 stainless steel hose reel - Ref. 5675T2

FOR CLEANING FLOORS AND WORK SURFACES

Auto-rewind hose reel with flexible hose L. 15m and guide rollers: Maximum temperature 70°C.
Flow rate 23 lpm at 3 bar.
Maximum pressure 20 bar, 12 bar with trigger-op hand spray. 304 Stainless steel base and drum Ø 390mm.

Order separately: an angled stopcock with integrated vacuum breaker to prevent the back flow of polluted water into the mains supply.

TECHNICAL FEATURES

Auto-rewind 304 stainless steel hose reel
Ref. 5675T2


Connector	3/4"
Height	400mm
Depth	410mm
Length	186mm
Flow rate	14 lpm
Finish	304 Stainless steel

Tootekood: DE-5675T2 , Tarneaeg: 14-21 päeva , Viimistlus:

2855,00 €

Lisa soovikorvi

Võrdle

Laost otsas

Automatne kummikute pesur düüsiga, 12V, 50Hz

automatic washing system for wellingtons with jets - 12V, 50Hz

AMO 01 is a stainless steel automatic washing system for wellingtons with sensor-controlled water nozzles. When stepping into the washing chamber of the system (scanning zone) water starts to flow from the nozzles automatically and wellingtons are cleaned of dirt. Water stops flowing with a certain time delay after the foot has been removed from the scanning zone.
AMO 01 is designed for a single pipe inlet of pre-mixed water from the circulation or water pre-mixed by means of a thermostatic valve.
The AMO 01 automatic washing system is intended mainly for operations with slight shoe contamination where quick washing at maximum water savings is guaranteed.

Package contents

body of the washing machine
photocell head
nozzles – 8 pcs
electromagnetic valves 2 pcs
corner valves with filter
connecting hoses

Radius of sensor	0 – 0,4 m
Water inlet	G 1/2“
Water pressure	0,3 – 1,0 MPa
Outlet	d = 32 mm
Inner dimensions of the trough	250 x 400 x 280 mm
Electricity protection	IP 55
Power supply	12 V, 50 Hz
Power requirement	10 VA
Source of power supply	ZAC 1/20 (max. 2 x AMO 01)
	ZAC 1/50 (max. 5 x AMO 01)
Weight	18 kg

Set up water inlet as per picture
Set up outlet d = 32 mm
Set up cable for power supply – 12 V, 50 Hz from source of power supply ZAC

Tootekood: AZP-AMO 01 , Tarneaeg: 3-5 nädalat , Viimistlus:

2405,00 €

Lisa soovikorvi

Võrdle

Laost otsas

Automatne kummikute pesur harjaga, 220V, 50Hz

automatic washing system for soles with rotary brushes - 230V, 50Hz

RMP 02 is a stainless steel sensor-controlled washing system with rotary brushes for wellingtons. A built-in photocell sensor reacts to the user holding the handrail. The electromagnetic valve switches on, opens the water inlet, the brushes start to rotate and the circular jet injection of the disinfecting lotion is carried out. After placing the foot with the wellington on the grid in between the rotary brushes, the sole is cleaned by means of the horizontal brush. There is a CENTRAL/STOP button on the handrail for emergency switch-off.
The washing system is intended for free standing installation on the floor. Imperfections in the floor are balanced out by four adjustable hobs. The construction of the system allows the outlet to be placed above floor level. Large pieces of dirt are collected by a sieve, which can be easily cleaned. The sieve and brush can be taken out without using a tool.
The RMP 02 washing system, with its easy maintenance, is mainly intended for operations where quick removal of mechanical dirt from wellingtons is required.
The canister with disinfecting solution is not part of the delivery.

Package contents

body of the washing machine
removable grid
electronics with photocell
rotary brush
hand brush
jerican holder
priming hose
adjustable supporting legs
central stop button

Radius of sensor	0,5 m
Water inlet	G 1/2“
Water pressure	0,1 – 1,0 MPa
Outlet	G 6/4”
Electricity protection	IP 55
Power supply	230 V, 50 Hz
Power requirement	370 W
Water temperature	max. 42°C
Weight	41 kg

Set up water inlet as per picture
Set up outlet G 6/4” via effluvial cover
Set up cable for power supply – 230 V, 50 Hz

Tootekood: AZP-RMP 02 , Tarneaeg: 3-5 nädalat , Viimistlus:

10323,00 €

Lisa soovikorvi

Võrdle

Laost otsas

Automatne kummikute pesur harjaga, 220V, 50Hz

RMO 02

automatic washing system for wellingtons

RMO 02 is a stainless steel sensor-controlled washing system with rotary brushes for wellingtons. A built-in photocell sensor reacts to the user holding the handrail. The electromagnetic valve switches on, opens the water inlet, the brushes start to rotate and the circular jet injection of the disinfecting lotion is carried out. After placing the foot with the wellington on the grid in between the rotary brushes, the sole is cleaned by means of the horizontal brush and the leg portion is cleaned by means of two vertical brushes. The system is automatically switched off when the user releases the handrail. There is a CENTRAL/STOP button on the handrail for emergency switch-off.
The washing system is intended for free standing installation on the floor. Imperfections of the floor are balanced out by four adjustable hobs. The construction of the system allows the outlet to be placed above the floor level.
The RMO 02 washing system, with its easy maintenance, is mainly intended for operations where quick removal of mechanical dirt from wellingtons is required.
The canister with disinfecting solution is not part of the delivery.

Package contents

body of the washing machine
removable grid
electronics with photocell
three rotary brushes
jerican holder
priming hose
adjustable supporting legs
central stop button

Radius of sensor	0,7 m
Water inlet	G 1/2“
Water pressure	0,1 – 1,0 MPa
Outlet	G 6/4”
Electricity protection	IP 55
Power supply	230 V, 50 Hz
Power requirement	370 W
Water temperature	max. 42°C
Weight	95 kg

Set up water inlet as per picture
Set up outlet G 6/4” via effluvial cover
Set up cable for power supply – 230 V, 50 Hz

Tootekood: AZP-RMO 02 , Tarneaeg: 3-5 nädalat , Viimistlus:

16293,00 €

Lisa soovikorvi

Võrdle

Laost otsas

AZP Brno adapter 1-3 punkte

	ZAC 1/20, ZAC 1/50, ZAC 1/36L power supply

ZAC is a safe source of voltage supply intended to power automatic sanitary equipment made by AZP Brno, Ltd.

The source of power supply consists of a safety transformer produced in accordance with ČSN IEC 742+A1 standards. All kinds of sensors can be connected to these sources in random combinations, as can other devices with a supply voltage of 12 V, 50 Hz (total power requirement either 20 VA, 50 VA or 36 VA).

ZAC 1/20 and ZAC 1/50 are independent sources, 1/36L ZAC is the source for the location on the DIN-rail (4 modules).

Version types
ZAC 1/20 - source of power supply with output 20 VA
ZAC 1/50 - source of power supply with output 50 VA
ZAC 1/36L - source of power supply with output 36 VA

Source of power supply can be placed at a maximum distance of 30 m from the connected appliance.

Basic technical information
Input voltage:	230 V, 50 Hz
Output voltage:	12 V, 50 Hz
Power requirement:	20 VA (ZAC 1/20)
	50 VA (ZAC 1/50)
	36 VA (ZAC 1/36L)
Electricity protection:	IP 55 (ZAC 1/20, ZAC 1/50)
	IP 20 (ZAC 1/36L)
Weight:	0,8 kg (ZAC 1/20, ZAC 1/36L)
	1,2 kg (ZAC 1/50)

Requirements for setting up the construction

ZAC 1/20, ZAC 1/50

Set-up supply of electricity 230 V,50 Hz – cable CYKY 3Cx1,5
Set-up niche for flush mounting – size as per installed source
Distribution to each device is carried out by cable CYKY 2Ax1,5

ZAC 1/36 L

It is installed on the DIN-rail - width of 4 modules

Figure
ZAC 1/20

ZAC 1/50

Product title

ZAC 1/20 -

power supply for up to 3 devices - 230V, 50Hz

ZAC 1/50 -

power supply for up to 8 devices - 230V, 50Hz

ZAC 1/36L -

power supply for up to 6 devices - 230V, 50Hz

Tootekood: AZP-ZAC 1-20 , Tarneaeg: 3-4 nädalad , Viimistlus:

105,00 €

Lisa soovikorvi

Võrdle

Laost otsas

Bahco padrunite kmpl 1/4" 4-13mm padrunvõtmed, pööratava peaga narre + pikad ja lühikesed otsakud. 65 osa

1/4 "kandilise ajamiga pistikupesakomplekt metrilise kuuskantprofiiliga ja pööratava peaga riiv - 65 tk

SW65

TOOTE ÜKSIKASJAD

Kiirpistiku vabastamisnupuga pööratav pearetk

1/4 "pööratav peareket

1/4 "pikendus 75 mm

1/4 "pikendus 150 mm

1/4 "ketra käepide

1/4 "d x 1/4" h sidur

1/4 "magnetotsikute hoidja kiire vabastamine

3/8 "f x 1/4" m 3-suunaline adapter

1/4 "bitiadapter

1/4 "lamedad otsad 4, 5,5, 6,5 mm

1/4 "Pozidrivi otsad nr 1, # 2, # 3

1/4 "Phillipsi otsad nr 0, # 1, # 2, # 3, # 4

1/4 "Torx otsikud T8, T10, T15, T20, T25, T27, T30, T40

1/4 "kuuskantotsad 3, 4, 5, 6, 8, 10 mm

1/4 "Pozidrivi pikad otsad nr 1, # 2 (2x)

1/4 "pikkused Phillipsi otsad nr 1, # 2 (2x)

1/4 "Torxi pikad otsad T10, T15, T20, T25 (2x), T27 (2x), T30 (2x)

1/4 "kuuskantpikkad otsad 3, 4, 5, 6 mm

Matt viimistlus

Kõrgjõudlusega legeerteras

Vähem kinnitusdetailide kulumist ja kahjustusi tänu Dynamic Drive ™ profiilipesadele

Kiire pistikupesa vabastamise nupp hammasrattal

Juhtum: suure tihedusega polüetüleen (HDPE)

Standardid: ISO 1174 ja DIN 3120

1/4" Square Drive Socket Set with Metric Hex Profile and Swivel Head Ratchet - 65 Pcs

PRODUCT DETAILS

Swivel head ratchet with quick socket release button
1/4" swivel head ratchet
1/4" extension 75 mm
1/4" extension 150 mm
1/4" spinner handle
1/4" d x 1/4" h coupler
1/4" magnetic bit holder quick release
3/8" f x 1/4" m 3-way adapter
1/4" bit adapter
1/4" flat bits 4, 5.5, 6.5 mm
1/4" Pozidriv bits #1, #2, #3
1/4" Phillips bits #0, #1, #2, #3, #4
1/4" Torx bits T8, T10, T15, T20, T25, T27, T30, T40
1/4" hex bits 3, 4, 5, 6, 8, 10 mm
1/4" Pozidriv long bits #1, #2 (2x)
1/4" Phillips long bits #1, #2 (2x)
1/4" Torx long bits T10, T15, T20, T25 (2x), T27 (2x), T30 (2x)
1/4" hex long bits 3, 4, 5, 6 mm
Matte finish
High-performance alloy steel
Less wear and damage to fasteners thanks to Dynamic Drive™ profile sockets
Quick socket release button on ratchet
Case: high density polythene (HDPE)
Standards: ISO 1174 and DIN 3120

Набор головок с квадратным приводом 1/4 дюйма с метрическим шестигранным профилем и трещоткой с поворотной головкой - 65 шт.

SW65

ИНФОРМАЦИЯ О ПРОДУКТЕ

Трещотка с поворотной головкой и кнопкой быстрого отсоединения

Трещотка с поворотной головкой 1/4 дюйма

Удлинитель 1/4 дюйма 75 мм

Удлинитель 1/4 "150 мм

Ручка спиннера 1/4 дюйма

Муфта 1/4 "d x 1/4" h

Быстроразъемный магнитный держатель бит 1/4 дюйма

3-ходовой адаптер 3/8 дюйма x 1/4 дюйма

Адаптер для бит 1/4 дюйма

Плоские биты 1/4 дюйма 4, 5,5, 6,5 мм

Биты Pozidriv 1/4 "# 1, # 2, # 3

Бит 1/4 "Phillips # 0, # 1, # 2, # 3, # 4

Биты Torx 1/4 дюйма T8, T10, T15, T20, T25, T27, T30, T40

Шестигранные биты 1/4 дюйма 3, 4, 5, 6, 8, 10 мм

1/4 дюйма, длинные биты Pozidriv # 1, # 2 (2x)

1/4-дюймовые длинные насадки Phillips # 1, # 2 (2 шт.)

Длинные биты Torx 1/4 дюйма T10, T15, T20, T25 (2x), T27 (2x), T30 (2x)

1/4 "шестигранные длинные биты 3, 4, 5, 6 мм

Матовое покрытие

Легированная сталь с высокими эксплуатационными характеристиками

Меньший износ и повреждение крепежных деталей благодаря профильным головкам Dynamic Drive ™.

Кнопка быстрого высвобождения гнезда на трещотке

Корпус: полиэтилен высокой плотности (HDPE)

Стандарты: ISO 1174 и DIN 3120

Tootekood: BAH-SW65 , Tarneaeg: 2-3 nädala , Viimistlus:

154,00 €

Lisa soovikorvi

Võrdle

Laost otsas

Bahco padrunite kmpl 1/4"+1/2" 4-27mm padrunvõtmed, pööratava peaga narred + pikad ja lühikesed otsakud. 79 osa

1/4" and 1/2" Square Drive Socket Set with Metric Hex Profile and Swivel Head Ratchet - 79 Pcs

PRODUCT DETAILS

Slim head ratchet with quick socket release button
11 pcs 1/4" hex sockets 4, 4.5, 5, 5.5, 6, 7, 8, 10, 11, 12, 13 mm
1/4" extension 75 mm
1/4" extension 150 mm
1/4" spinner handle
1/4" drive swivel head ratchet
1/4"d x 1/4"h coupler
14 pcs 1/2" hex sockets 10, 11, 12, 13, 15, 16, 17, 18, 19, 21, 22, 23, 24, 27 mm
1/2" extension 125 mm
1/2" extension 250 mm
3/8"f x 1/2"m 3-way adapter
1/2" drive swivel head ratchet
1/4" Pozidriv #1, #2
1/4" Phillips #1, #2
1/4" Torx T10, T15, T20, T25, T27, T30
1/4" hex 3, 4, 5, 6 mm
31 pcs bits and magnetic holder box set
Matte finish
High-performance alloy steel
Less wear and damage to fasteners thanks to Dynamic Drive™ profile sockets
Quick socket release button on ratchet
Case: high density polythene (HDPE)
Standards: ISO 1174 and DIN 3120

1/4 "ja 1/2" kandilise ajamiga pistikupesakomplekt metrilise kuuskantprofiiliga ja pööratava peaga riivist - 79 tk

TOOTE ÜKSIKASJAD

Õhuke peatahvel, millel on kiire pesa vabastamisnupp

11 tk 1/4 "kuuskantpesad 4, 4.5, 5, 5.5, 6, 7, 8, 10, 11, 12, 13 mm

1/4 "pikendus 75 mm

1/4 "pikendus 150 mm

1/4 "ketra käepide

1/4-tolline ajamiga pöördpea

1/4 "d x 1/4" h sidur

14 tk 1/2 "kuuskantpesad 10, 11, 12, 13, 15, 16, 17, 18, 19, 21, 22, 23, 24, 27 mm

1/2 "pikendus 125 mm

1/2 "pikendus 250 mm

3/8 "f x 1/2" m 3-suunaline adapter

1/2 "ajamiga pööratav pea

1/4 "Pozidriv # 1, # 2

1/4 "Phillips # 1, # 2

1/4 "Torx T10, T15, T20, T25, T27, T30

1/4 "kuuskant 3, 4, 5, 6 mm

31 tk otsikut ja magnetkarbikomplekt

Matt viimistlus

Kõrgjõudlusega legeerteras

Vähem kinnitusdetailide kulumist ja kahjustusi tänu Dynamic Drive ™ profiilipesadele

Kiire pistikupesa vabastamise nupp hammasrattal

Juhtum: suure tihedusega polüetüleen (HDPE)

Standardid: ISO 1174 ja DIN 3120

Набор головок с квадратным приводом 1/4 "и 1/2" с метрическим шестигранным профилем и трещоткой с поворотной головкой - 79 шт.

ИНФОРМАЦИЯ О ПРОДУКТЕ

Трещотка с тонкой головкой и кнопкой быстрого высвобождения

11 шестигранных головок 1/4 дюйма 4, 4.5, 5, 5.5, 6, 7, 8, 10, 11, 12, 13 мм

Удлинитель 1/4 дюйма 75 мм

Удлинитель 1/4 "150 мм

Ручка спиннера 1/4 дюйма

Трещотка с поворотной головкой 1/4 дюйма

Муфта 1/4 "d x 1/4" h

14 шт. Шестигранных головок 1/2 "10, 11, 12, 13, 15, 16, 17, 18, 19, 21, 22, 23, 24, 27 мм

Удлинитель 1/2 "125 мм

Удлинитель 1/2 "250 мм

Трехходовой адаптер 3/8 дюйма x 1/2 дюйма

Храповой механизм с поворотной головкой 1/2 дюйма

1/4 "Позидрив №1, №2

1/4 дюйма Филлипс №1, №2

1/4 дюйма Torx T10, T15, T20, T25, T27, T30

1/4 "шестигранник 3, 4, 5, 6 мм

Набор из 31 бит и магнитного держателя

Матовое покрытие

Легированная сталь с высокими эксплуатационными характеристиками

Меньший износ и повреждение крепежных деталей благодаря профильным головкам Dynamic Drive ™.

Кнопка быстрого высвобождения гнезда на трещотке

Корпус: полиэтилен высокой плотности (HDPE)

Стандарты: ISO 1174 и DIN 3120

Tootekood: BAH-SW79 , Tarneaeg: 14-21 päeva , Viimistlus:

291,00 €

Lisa soovikorvi

Võrdle

Laost otsas

Bahco padrunite kmpl 1/4"+3/8" 4-21mm padrunvõtmed, pööratava peaga narred + pikad ja lühikesed otsakud. 91 osa

1/4" and 3/8" Square Drive Socket Set with Metric Hex Profile and Swivel Head Ratchet - 91 Pcs

PRODUCT DETAILS

11 pcs 1/4" hex sockets 4, 4.5, 5, 5.5, 6, 7, 8, 10, 11, 12, 13 mm
1/4" extension 75 mm
1/4" extension 150 mm
1/4" spinner handle
1/4" d x 1/4" h coupler
1/4" drive swivel head ratchet
11 pcs 3/8" hex sockets 8, 10, 11, 12, 13, 15, 16, 17, 18, 19, 21 mm
3/8" extension 75 mm
3/8" extension 150 mm
3/8" d x 1/4" h coupler
3/8" drive swivel head ratchet
3/8" f x 1/4" m 3-way adapter
1/4" Pozidriv #1, #2 (2x)
1/4" Phillips #1, #2 (2x)
1/4" Torx T10, T15, T20, T25, T27, T30 (2x)
1/4" hex 3, 4, 5, 6 mm (2x)
31 pcs bits and adapter box set
Matte finish
High-performance alloy steel
Less wear and damage to fasteners thanks to Dynamic Drive™ profile sockets
Quick socket release button on ratchet
Case: high density polythene (HDPE)
Standards: ISO 1174 and DIN 3120

1/4 "ja 3/8" kandilise ajamiga pistikupesakomplekt metrilise kuuskantprofiiliga ja pööratava peaga reketiga - 91 tk

TOOTE ÜKSIKASJAD

11 tk 1/4 "kuuskantpesad 4, 4.5, 5, 5.5, 6, 7, 8, 10, 11, 12, 13 mm

1/4 "pikendus 75 mm

1/4 "pikendus 150 mm

1/4 "ketra käepide

1/4 "d x 1/4" h sidur

1/4-tolline ajamiga pöördpea

11 tk 3/8 "kuuskantpesad 8, 10, 11, 12, 13, 15, 16, 17, 18, 19, 21 mm

3/8 "pikendus 75 mm

3/8 "pikendus 150 mm

3/8 "d x 1/4" h sidur

3/8 "ajamiga pööratav peareket

3/8 "f x 1/4" m 3-suunaline adapter

1/4 "Pozidriv # 1, # 2 (2x)

1/4 "Phillips nr 1, nr 2 (2x)

1/4 "Torx T10, T15, T20, T25, T27, T30 (2x)

1/4 "kuuskant 3, 4, 5, 6 mm (2x)

31 tk otsikut ja adapterikarbi komplekt

Matt viimistlus

Kõrgjõudlusega legeerteras

Vähem kinnitusdetailide kulumist ja kahjustusi tänu Dynamic Drive ™ profiilipesadele

Kiire pistikupesa vabastamise nupp hammasrattal

Juhtum: suure tihedusega polüetüleen (HDPE)

Standardid: ISO 1174 ja DIN 3120

Набор головок с квадратным приводом 1/4 "и 3/8" с метрическим шестигранным профилем и трещоткой с поворотной головкой - 91 шт.

ИНФОРМАЦИЯ О ПРОДУКТЕ

11 шестигранных головок 1/4 дюйма 4, 4.5, 5, 5.5, 6, 7, 8, 10, 11, 12, 13 мм

Удлинитель 1/4 дюйма 75 мм

Удлинитель 1/4 "150 мм

Ручка спиннера 1/4 дюйма

Муфта 1/4 "d x 1/4" h

Трещотка с поворотной головкой 1/4 дюйма

11 головок под шестигранник 3/8 дюйма 8, 10, 11, 12, 13, 15, 16, 17, 18, 19, 21 мм

Удлинитель 3/8 дюйма 75 мм

Удлинитель 3/8 дюйма 150 мм

Муфта 3/8 "d x 1/4" h

Трещотка с поворотной головкой 3/8 дюйма

3-ходовой адаптер 3/8 дюйма x 1/4 дюйма

1/4 "Позидрив №1, №2 (2х)

1/4 дюйма Phillips # 1, # 2 (2 шт.)

1/4 дюйма Torx T10, T15, T20, T25, T27, T30 (2x)

1/4 "шестигранник 3, 4, 5, 6 мм (2x)

Набор насадок и адаптеров 31 шт.

Матовое покрытие

Легированная сталь с высокими эксплуатационными характеристиками

Меньший износ и повреждение крепежных деталей благодаря профильным головкам Dynamic Drive ™.

Кнопка быстрого высвобождения гнезда на трещотке

Корпус: полиэтилен высокой плотности (HDPE)

Стандарты: ISO 1174 и DIN 3120

Tootekood: BAH-SW91 , Tarneaeg: 14-21 päeva , Viimistlus:

275,00 €

Lisa soovikorvi

Võrdle

Laost otsas

Bahco padrunite kmpl 1/4"+3/8" 4-21mm padrunvõtmed, SLIM narred + pikad ja lühikesed otsakud. 91 osa

1/4 "ja 3/8" ruudukujulise pesa komplekt metrilise kuuskantprofiiliga ja õhukese riiviga - 91 tk

TOOTE ÜKSIKASJAD

Õhuke peatahvel, millel on kiire pistikupesa vabastamise nupp

11 tk 1/4 "kuuskantpesad 4, 4.5, 5, 5.5, 6, 7, 8, 10, 11, 12, 13 mm

1/4 "pikendus 75 mm

1/4 "pikendus 150 mm

1/4 "ketra käepide

1/4 "d x 1/4" h sidur

1/4-tolline õhuke pearatas

11 tk 3/8 "kuuskantpesad 8, 10, 11, 12, 13, 15, 16, 17, 18, 19, 21 mm

3/8 "pikendus 75 mm

3/8 "pikendus 150 mm

3/8 "d x 1/4" h sidur

3/8 "veetav õhuke pearetk

3/8 "f x 1/4" m 3-suunaline adapter

1/4 "Pozidriv # 1, # 2 (2x)

1/4 "Phillips nr 1, nr 2 (2x)

1/4 "Torx T10, T15, T20, T25, T27, T30 (2x)

1/4 "kuuskant 3, 4, 5, 6 mm (2x)

31 tk otsikut ja adapterikarbi komplekt

Matt viimistlus

Kõrgjõudlusega legeerteras

Vähem kinnitusdetailide kulumist ja kahjustusi tänu Dynamic Drive ™ profiilipesadele

Kiire pistikupesa vabastamise nupp hammasrattal

Juhtum: suure tihedusega polüetüleen (HDPE)

Standardid: ISO 1174 ja DIN 3120

Набор головок с квадратным приводом 1/4 "и 3/8" с метрическим шестигранным профилем и храповым механизмом с тонкой головкой - 91 шт.

ИНФОРМАЦИЯ О ПРОДУКТЕ

Трещотка с тонкой головкой и кнопкой быстрого высвобождения

11 шестигранных головок 1/4 дюйма 4, 4.5, 5, 5.5, 6, 7, 8, 10, 11, 12, 13 мм

Удлинитель 1/4 дюйма 75 мм

Удлинитель 1/4 "150 мм

Ручка спиннера 1/4 дюйма

Муфта 1/4 "d x 1/4" h

Трещотка с узкой головкой 1/4 дюйма

11 головок под шестигранник 3/8 дюйма 8, 10, 11, 12, 13, 15, 16, 17, 18, 19, 21 мм

Удлинитель 3/8 дюйма 75 мм

Удлинитель 3/8 дюйма 150 мм

Муфта 3/8 "d x 1/4" h

Трещотка с узкой головкой 3/8 дюйма

3-ходовой адаптер 3/8 дюйма x 1/4 дюйма

1/4 "Позидрив №1, №2 (2x)

1/4 дюйма Phillips # 1, # 2 (2 шт.)

1/4 дюйма Torx T10, T15, T20, T25, T27, T30 (2x)

1/4 "шестигранник 3, 4, 5, 6 мм (2x)

Набор насадок и адаптеров 31 шт.

Матовое покрытие

Легированная сталь с высокими эксплуатационными характеристиками

Меньший износ и повреждение крепежных деталей благодаря профильным головкам Dynamic Drive ™.

Кнопка быстрого высвобождения гнезда на трещотке

Корпус: полиэтилен высокой плотности (HDPE)

Стандарты: ISO 1174 и DIN 3120

1/4" and 3/8" Square Drive Socket Set with Metric Hex Profile and Slim Head Ratchet - 91 Pcs

PRODUCT DETAILS

Slim head ratchet with quick socket release button
11 pcs 1/4" hex sockets 4, 4.5, 5, 5.5, 6, 7, 8, 10, 11, 12, 13 mm
1/4" extension 75 mm
1/4" extension 150 mm
1/4" spinner handle
1/4" d x 1/4" h coupler
1/4" drive slim head ratchet
11 pcs 3/8" hex sockets 8, 10, 11, 12, 13, 15, 16, 17, 18, 19, 21 mm
3/8" extension 75 mm
3/8" extension 150 mm
3/8" d x 1/4" h coupler
3/8" drive slim head ratchet
3/8" f x 1/4" m 3-way adapter
1/4" Pozidriv #1, #2 (2x)
1/4" Phillips #1, #2 (2x)
1/4" Torx T10, T15, T20, T25, T27, T30 (2x)
1/4" hex 3, 4, 5, 6 mm (2x)
31 pcs bits and adapter box set
Matte finish
High-performance alloy steel
Less wear and damage to fasteners thanks to Dynamic Drive™ profile sockets
Quick socket release button on ratchet
Case: high density polythene (HDPE)
Standards: ISO 1174 and DIN 3120

Tootekood: BAH-SL91 , Tarneaeg: 2-3 nädala , Viimistlus:

220,00 €

Lisa soovikorvi

Võrdle

Laost otsas

BALLADE / SYMPHONIE / MAESTRO Kinnituskomplekt pinkide / istmete ja laua jaoks

Viide: 51972

Eelised:

Valmistatud Prantsusmaal
4 keskmist roostevabast terasest seib A4
4 mutrit M8 roostevaba teras A4
4 mehaanilist tüüblit M8x100 roostevaba teras A4
Sobib pinkide, istmete, laudade ja konteinerikaanede kinnitamiseks

BALLADE / SYMPHONIE / MAESTRO Комплект крепления для скамеек / сидений и стола

Артикул: 51972

Преимущества:

Сделано во Франции
4 средних плоских шайбы из нержавеющей стали A4
4 гайки M8 из нержавеющей стали A4
4 механических дюбеля M8x100 из нержавеющей стали A4
Подходит для крепления скамеек, сидений, столов и крышек контейнеров

Tootekood: RO-51972 , Tarneaeg: 4-6 nädala , Viimistlus:

105,00 €

Lisa soovikorvi

Võrdle

Laost otsas

Bidee kraan küma/eelsegatud veele isesulguva süsteemiga 1/2" kroom

Bidee ventiil, kraan eelsegatud, või külma veele 1/2"

Isesulguva mehhanismiga, kroom

Tootekood: IDR-02427/S , Tarneaeg: 7-14 päeva , Viimistlus:

135,00 €

Lisa soovikorvi

Võrdle

Laost otsas

Broen 1-le silmadele 45", hädaabi silmadušš, lääbiviik

Min. working pressure: 1.5 bar for all Eye Showers

No. 27 10 003 10 05 011

Weight: Approx. 0.5 kg

Table mounted eye shower with
a single 45° head, incl. 1.5m inlet hose. Trigger operated including a built-in check valve and FLOWFIX for regulation of water flow (7 l/min).
Min. working pressure: 1,5 bar.

Tootekood: B-27100031005011 , Tarneaeg: 14-21 päeva , Viimistlus:

465,00 €

Lisa soovikorvi

Võrdle

Laost otsas