Kaubamärk
Hind
 
37 EUR
16293 EUR
Tootegrupid

Roostevabast Terasest Santehnika

Roostevabast Terasest Santehnika

Kataloog Portinox

Roostevabast terasest santehnika on populaarne valik paljudes tanklades, ärihoonetes ja avalikes rajatistes. Roostevaba teras on korrosioonikindel ja vastupidav materjal, mis sobib suurepäraselt kasutamiseks niisketes ja niiskusrohketes keskkondades, nagu vannitoad, köögid, basseinid ja muud sanitaarruumid. Roostevabast terasest santehnika on mitmeid eeliseid, sealhulgas järgmised:

  1. Vastupidavus: Roostevaba teras on äärmiselt vastupidav materjal, mis suudab taluda korrosiooni, roostet, plekke ja kulumist. See tagab, et roostevabast terasest santehnika on pikaajaline ja vastupidav kasutamisele, mistõttu see on ideaalne valik nõudlikes keskkondades, kus esineb palju niiskust või kemikaale.

  2. Hügieeniline: Roostevabast terasest santehnika on hügieeniline, sest see on sile ja mittekleepuv pind, mis ei lase bakteritel ja mikroobidel kergesti kinnituda ega paljuneda. See muudab selle lihtsasti puhastatavaks ja sobivaks kasutamiseks kohtades, kus hügieen on oluline, nagu näiteks köögid, meditsiiniasutused ja toiduainetetööstus.

  3. Esteetiline välimus: Roostevabast terasest santehnika annab modernse ja stiilse välimuse, mis sobib hästi erinevate sisekujundusstiilidega. Roostevaba teras on ajatu materjal, mis ei muutu moest, ning see võib anda ruumidele elegantsust, vastupidavust ja professionaalset ilmet.

  4. Keskkonnasõbralikkus: Roostevaba teras on taaskasutatav materjal, mis on keskkonnasõbralikum valik võrreldes mõne muu santehnika materjaliga, nagu plastik või pronks. Samuti on roostevabast terasest santehnika madalama energiakuluga tootmine võrreldes teiste metallidega, mis võib olla keskkonnasõbralikum valik.

  5. Mitmekülgsus: Roostevabast terasest santehnikat on saadaval erinevates vormides ja stiilides, sealhulgas segistid, valamud, dušinurgad, WC-potid, kätekuivatid ja palju muud. See võimaldab valida sobiva roostevaba terasest santehnika vastavalt konkreetsetele vajadustele ja eelistustele.

Kokkuvõttes on roostevabast terasest santehnika mitmekülgne, vastupidav, hügieeniline ja esteetiliselt meeldiv valik, mis sobib suurepäraselt erineva projektidele.

Alamgrupid

Järjesta:
Kuva: Nimekirjana / Võrgustikuna

Pesurenn Intra 1500 mm roostevabast terasest pritsmislekiga ja konsoolidega

 

P3

Flexible wash trough supplied with integrated wall brackets.
Inner corners with more than 90° angle, and pressed drain without screws and gasket ensure optimum hygiene and easy cleaning. The sink has a fall against the drain in the center. Soft transitions at all external angles counteract damage in the event of a fall against the trough. Safe and comfortable handle support at the bottom of the edges to prevent injury during assembly. The bowl has enough depth to accommodate a bucket.
Meets all requirements in EN 14296.

Washtroughs available in standard lengths 600, 1200, 1500, 1800, 2100, 2400, 2800 and 3000 mm.
Washtroughs also available in any customer specified length between 600 and 3000. Art. Nr: P3-Flex

Tootekood: I-P3 1500mm ,   Tarneaeg: 14-21 päeva
1281,00 €

Pesurenn Intra 600 mm roostevabast terasest pritsmislekiga ja konsoolidega

 

P3

Flexible wash trough supplied with integrated wall brackets.
Inner corners with more than 90° angle, and pressed drain without screws and gasket ensure optimum hygiene and easy cleaning. The sink has a fall against the drain in the center. Soft transitions at all external angles counteract damage in the event of a fall against the trough. Safe and comfortable handle support at the bottom of the edges to prevent injury during assembly. The bowl has enough depth to accommodate a bucket.
Meets all requirements in EN 14296.

Washtroughs available in standard lengths 600, 1200, 1500, 1800, 2100, 2400, 2800 and 3000 mm.
Washtroughs also available in any customer specified length between 600 and 3000. Art. Nr: P3-Flex

Tootekood: I-P3 600mm ,   Tarneaeg: 14-21 päeva
909,00 €

2-ne Valamu jalaga 1200x700, kõrgus 850mm , R/V teras

Нержавеющая большегрузная двойная мойка на ножках, 1200 x 700 x 850 мм

 

Характеристики

  • stainless steel bulk double-sink with a sheating
  • without a tap hole (could be made to order)
  • possibility of fine plane regulation by the regulation screws on the supporting legs
  • possibility to order inner sinks in dimensions: 400 x 300 x 200 mm/ 400 x 400 x 250 mm/ 400 x 400 x 200 mm
  • available also in the length 1400 mm
  • material CrNi 18/10 (AISI-304)
  • brushed finish
  • different dimensions could be made to order
Арт. № 93160
Название SLUN 16
Tootekood: SA-SLUN16 ,   Tarneaeg: 3-5 nädalad
2745,00 €

Aasia WC, R/V teras AISI 304

Tootekood: PPT ,   Tarneaeg: 7-21 päeva
488,00 €

Akuga aiaprits 5l

 

Taimekaitsevahendite ja leheväetiste pritsimiseks koduaias ja väiksemas istanduses

AKUPRITS

micro USB

 
Taimede pritsimiseks ja umbrohutõrjeks koduaedades.
 
 
 
Paak on valmistatud kvaliteetsest, kemikaalikindlast plastikust.
Töörõhk 1,7 - 2 bar.
Teleskoopiline metallist voolik 36-60cm
Reguleeritav pihustusnurk 0-90 °
Maksimaalne voolukiirus 0,3 l / min.
Ühendusvooliku pikkus 150cm
Õlarihm
 
 
Liitiumioonaku laadimine laadijast
Täislaadimine võtab 4 tundi.
Pidev töö ühe laadimisega kuni 120 minutini
Aku taseme indikaator
 
Taimede jootmise protsessi täiesti uus kvaliteet.
Nüüd on see koos juhtmeta pritsidega FINLAND 1937 ja 1938 mõnus jalutuskäik teie aias. Kõik, mida peate tegema, on reguleerida pihustusnurka ja vajutada nuppu. Pole vaja segada ja jälgida silindris olevat rõhku, keerake lihtsalt voolik õiges suunas. Pihusti rõõmustab teid säästlikkusega: see täidab täidetud lahuse täielikult kuni viimase tilgani. Nautige FINLAND.
 

Опрыскиватель FINLAND 1937 5 л

 

Для опрыскивания растений и борьбы с сорняками в приусадебных участках.

 

  • Бак из высококачественного пластика, устойчивого к химическому воздействию.
  • Рабочее давление   1.7 - 2 бар.
  • Телескопический металлический брандспойт 36-60см
  • Регулируемый угол распыления 0-90°
  • Максимальный расход жидкости 0,3л/мин.
  • Длина соединительного шланга 150см
  • Плечевой ремень

 

  • Зарядка Li-Ion  аккумулятора от зарядного устройства
  • Продолжительность полной зарядки – 4 часа.
  • Непрерывная работа от одного заряда до 120 минут
  • Индикатор  уровня заряда аккумулятора
Tootekood: FIN-FBSPR5L ,   Tarneaeg: 7-14 päeva
71,20 € (20%)
89,00 €
Tootekood: I-URIST2-1 ,   Tarneaeg: 7-14 päeva
86,00 €
Tootekood: I-URIST4-1 ,   Tarneaeg: 7-14 päeva
86,00 €

Stainless steel rectangular mirror, H. 500mm 
Ref. 3452

Depth 10mm
Length Unbreakable mirror
Width 385mm
Drop height 485mm
Finish "Mirror" polished 304 stainless steel
Tootekood: DE-3452 ,   Tarneaeg: 7-21 päeva
237,90 €
Antivandaalne R/V teras piezo dušisi nupp, eelsegatud veele,  ilma el.adaptorita
 
 

AUS 11

Pressure button-controlled shower for heat regulated water

 

 

   
 
 
 

AUS 11 is a new type of shower fitting for single shower control. The fitting is designated for premixed water – with one water inlet and shower outlet elbow. Water is released and closed by an anti-vandal pressure button connected to electronics and an electromagnetic valve. The fitting is covered by a rust-free anti-vandal cover to prevent damage. 

The mounting system has been designed so as to make removing the cover without using tools impossible with no bolt or screw being visible. The cover can be "pushed into" the wall level even if the mount box has been walled to an incorrect depth. 

AUS 11 is identical to AUS 1P with a different design and very resistant cover sheet. 

Electronics can work in two modes: 

1) The button works on the START/STOP basis – water release/closing. If the water is not turned off upon the time adjusted by the user or manager (e.g. 20 seconds), the electronic system itself instructs water stopping. The user must press again to start water running. This significantly saves water as the user reduces the showering time. 

2) The button works on the START/STOP basis. After the time adjusted by the manager (e.g. 3 minutes) expires there is a forced break when water cannot be released. During this time, the user is forced to leave the shower or wait. This prevents needless showering – water wasting. 

 

 
Basic technical information
Water input: G 1/2“
Water pressure: 1 - 10 Bar (0,1 – 1,0 MPa)
Time of water flow: 10 s – 42,5 min in mode 1
  0 s - 42,5 min in mode 2
Power supply: 12 V, 50 Hz
Power requirement: 6 VA
Source of power supplz: ZAC 1/20 (max. 3× AUS 11)
  ZAC 1/50 (max. 8× AUS 11)
Weight: 2,0 kg
 
 
Requirements for setting up the construction
  1. Water installation set up as per picture
  2. Set-up alcove 150 x 75 mm for installation casket
  3. Set-up cable for power supply – 12 V, 50 Hz from source of power supply ZAC
 
 
Complete delivery
  • installation casket
  • input and output bolting
  • electromagnetic valve
  • spherical valve
  • covering metal plate with piezo button
  • electronics
 
 
Made to order
  • SP 1 – shower arm with water flow of 9 l/min
  • SP 2 – shower arm with water flow of 7 l/min
  • SP 3 – shower arm with water flow of 7 l/min
  • ZAC - source of power supply 12V, 50Hz
 
 
Figure
 
 
A - water inlet G 1/2"
C - electricity supply cable 12 V, 50 Hz 
G - water outlet into shower armG 1/2"
 
 
 
 
Download information about the product
AUS 11 data for projectants - ( 84 kB )
 
Tootekood: AZP-AUS 11 ,   Tarneaeg: 3-4 nädalad
375,00 €

AUM 026 INV is a stainless steel, partly wall-built in washbasin, containing the combination of a liquid soap dispenser, water tap and hand dryer in a small space. The washbasin is adjusted to be used also by wheelchair persons – it is shallow, completed with handles, the waste is hidden behind the wall. Controlled by durable piezo-pushbuttons, electronically controlled turn-off (the period of water running is settable by the owner). The washbasin is to be mounted through the wall, all technology components are behind the wall, and thus cannot be damaged by users (anti-vandal design).

A wall-hanged version may be supplied to order, or a version without any of the functions (e.g. onlz water plus soap, or water plus dryer). The washbasin is made of AISI 304 stainless steel. A recommended cleaning agent for stainless products maintenance: Würth – preservation (order no. 0893 121 K), cleaning (order no. 893 121 1).

Basic technical information
Power supply: 230 V, 50 Hz
IP protection: IP 55
Dimensions (visible from outside): 800 x 800 x 363 mm
Required thickness of wall: min. 100 mm
Outlet: d = 40 mm
 
Requirements for setting up the construction
  1. Opening in the wal 740 x 740 mm
  2. Prepared el. supply cable 3C x 1,5 s 230 V, 50 Hz
  3. Prepared water outlet according to technical scheme
 
 
Complete delivery
  • Stainless-steel washbasin with handles
  • Electronic hand dryer
  • Electronic soap dispenser
  • Electronic water tap
  • Through-wall frame with bolts
  • Waste with a stink trap
  • 230V / 12V source for the electronics
 
Tootekood: AZP-AUM 026.TV INV ,   Tarneaeg: 3-4 nädalad
4300,00 €

Antivandaalne WC pott INVA R/V taras

AUZ 08 INV is a stainless-steel WC in matt design for the disabled. It is a stainless-steel toilet to stand on the floor at the wall. The drain is directed backwards (the bottom drain version AUZ 02 INV). The closet is based on the standard AUZ 08, which is heightened and lengthened to fulfil the directive regarding products for disabled persons. To increase the user comfort, the seating part is provided with a seat from hardened plastic. The closet includes a removable backrest recommended by the League for the rights of the wheelchair bound.

 

The standing WC is suitable for places where the common closet cannot be attached to the side wall, because of a thin bearing particle, for example.

 

It is suitable to supplement the closet with an automatic pressure-water flushing device with delayed flushing AUZ 3 INV (suitable for the disabled) or any flushing device with a cistern.

Basic technical information
Water inlet: d= 34 - 50 mm
Min. water flow: 70 l/min
Outlet: d= 90 mm
Weight: 27 kg
 
Complete delivery
  • Stainless steel closet
  • Plastic seat
  • Anchoring material
  • Stainless-steel backrest
Tootekood: AZP-AUZ 08 INV ,   Tarneaeg: 3-4 nädalad
2629,00 €
Antivandaalne WC pott R/V taras
 
 

AUZ 08

stainless-steel standing closet, with hardened seat, back drain

   
 
 
 

AUZ 08 is a stainless-steel WC in matt design. To increase the user comfort, it is provided with a grey seat with a lid made of hardened plastic (newly also with a seat in black design AUZ 08.CS). AUZ 08 is designed to stand on the floor at the wall; it is suitable for places where the common closet cannot be attached to the wall, because of a thin bearing particle, for example. The standard version of AUZ 08 has a back drain (the version with the bottom drain AUZ 02). It is suitable to supplement the WC with the automatic pressure water flushing device AUZ 3, automatic flushing device with the piezo button AUZ 3.P (or the vandal-resistant flushing device BSAZ 01) or any flushing device with a cistern.

 

Thanks to its resistance to damage, the closet is primarily intended for social facilities with demanding operation, such as highway lay-byes, alehouses, etc., where easy maintenance of sanitary conditions is required. WC is also manufactured in the design for the disabled under the designation AUZ 08 INV

 

Further closet versions can be found in the section Stainless-steel closets or Stainless-steel safety closets.

 

 
Basic technical information
Water inlet: d= 34-50 mm
Min. water flow: 70 l/min
Outlet: d= 90 mm
Weight: 23 kg
 
 
Requirements for setting up the construction
  1. Set-up outlet d = 110 mm including rubber sleeve for pipe d = 90 mm.
  2. Set-up water inlet d= 34-50 mm according to chosen sealing.
 
 
Complete delivery
  • Stainless steel closet
  • Plastic seat
  • Anchoring material
 
 
Made to order
  • AUZ 3 - automatic pressure flushing system
  • AUZ 3.P - automatic pressure flushing system with piezo control
  • BSAZ 01 - vandal resistant pressure flushing system
 
Tootekood: AZP-AUZ 08 ,   Tarneaeg: 3-4 nädalad
2452,00 €

Automatne kummikute pesur düüsiga, 12V, 50Hz

automatic washing system for wellingtons with jets - 12V, 50Hz

 

AMO 01 is a stainless steel automatic washing system for wellingtons with sensor-controlled water nozzles. When stepping into the washing chamber of the system (scanning zone) water starts to flow from the nozzles automatically and wellingtons are cleaned of dirt. Water stops flowing with a certain time delay after the foot has been removed from the scanning zone.
AMO 01 is designed for a single pipe inlet of pre-mixed water from the circulation or water pre-mixed by means of a thermostatic valve.
The AMO 01 automatic washing system is intended mainly for operations with slight shoe contamination where quick washing at maximum water savings is guaranteed.

Package contents

  • body of the washing machine
  • photocell head
  • nozzles – 8 pcs
  • electromagnetic valves 2 pcs
  • corner valves with filter
  • connecting hoses
 
Radius of sensor 0 – 0,4 m
Water inlet G 1/2“
Water pressure 0,3 – 1,0 MPa
Outlet d = 32 mm
Inner dimensions of the trough 250 x 400 x 280 mm
Electricity protection IP 55
Power supply 12 V, 50 Hz
Power requirement 10 VA
Source of power supply ZAC 1/20 (max. 2 x AMO 01)
  ZAC 1/50 (max. 5 x AMO 01)
Weight 18 kg
  • Set up water inlet as per picture
  • Set up outlet d = 32 mm
  • Set up cable for power supply – 12 V, 50 Hz from source of power supply ZAC
Tootekood: AZP-AMO 01 ,   Tarneaeg: 3-5 nädalat
2405,00 €

automatic washing system for soles with rotary brushes - 230V, 50Hz

 

RMP 02 is a stainless steel sensor-controlled washing system with rotary brushes for wellingtons. A built-in photocell sensor reacts to the user holding the handrail. The electromagnetic valve switches on, opens the water inlet, the brushes start to rotate and the circular jet injection of the disinfecting lotion is carried out. After placing the foot with the wellington on the grid in between the rotary brushes, the sole is cleaned by means of the horizontal brush. There is a CENTRAL/STOP button on the handrail for emergency switch-off.
The washing system is intended for free standing installation on the floor. Imperfections in the floor are balanced out by four adjustable hobs. The construction of the system allows the outlet to be placed above floor level. Large pieces of dirt are collected by a sieve, which can be easily cleaned. The sieve and brush can be taken out without using a tool.
The RMP 02 washing system, with its easy maintenance, is mainly intended for operations where quick removal of mechanical dirt from wellingtons is required.
The canister with disinfecting solution is not part of the delivery.

Package contents

  • body of the washing machine
  • removable grid
  • electronics with photocell
  • rotary brush
  • hand brush
  • jerican holder
  • priming hose
  • adjustable supporting legs
  • central stop button

 

Radius of sensor 0,5 m
Water inlet G 1/2“
Water pressure 0,1 – 1,0 MPa
Outlet G 6/4”
Electricity protection IP 55
Power supply 230 V, 50 Hz
Power requirement 370 W
Water temperature max. 42°C
Weight 41 kg

 

  • Set up water inlet as per picture
  • Set up outlet G 6/4” via effluvial cover
  • Set up cable for power supply – 230 V, 50 Hz

 

Tootekood: AZP-RMP 02 ,   Tarneaeg: 3-5 nädalat
10323,00 €

RMO 02

 

automatic washing system for wellingtons

RMO 02 is a stainless steel sensor-controlled washing system with rotary brushes for wellingtons. A built-in photocell sensor reacts to the user holding the handrail. The electromagnetic valve switches on, opens the water inlet, the brushes start to rotate and the circular jet injection of the disinfecting lotion is carried out. After placing the foot with the wellington on the grid in between the rotary brushes, the sole is cleaned by means of the horizontal brush and the leg portion is cleaned by means of two vertical brushes. The system is automatically switched off when the user releases the handrail. There is a CENTRAL/STOP button on the handrail for emergency switch-off.
The washing system is intended for free standing installation on the floor. Imperfections of the floor are balanced out by four adjustable hobs. The construction of the system allows the outlet to be placed above the floor level.
The RMO 02 washing system, with its easy maintenance, is mainly intended for operations where quick removal of mechanical dirt from wellingtons is required.
The canister with disinfecting solution is not part of the delivery.

Package contents

  • body of the washing machine
  • removable grid
  • electronics with photocell
  • three rotary brushes
  • jerican holder
  • priming hose
  • adjustable supporting legs
  • central stop button
Radius of sensor 0,7 m
Water inlet G 1/2“
Water pressure 0,1 – 1,0 MPa
Outlet G 6/4”
Electricity protection IP 55
Power supply 230 V, 50 Hz
Power requirement 370 W
Water temperature max. 42°C
Weight 95 kg
  • Set up water inlet as per picture
  • Set up outlet G 6/4” via effluvial cover
  • Set up cable for power supply – 230 V, 50 Hz

 

Tootekood: AZP-RMO 02 ,   Tarneaeg: 3-5 nädalat
16293,00 €
 
 

ZAC 1/20, ZAC 1/50, ZAC 1/36L

power supply

   
 
 
 

ZAC is a safe source of voltage supply intended to power automatic sanitary equipment made by AZP Brno, Ltd. 

The source of power supply consists of a safety transformer produced in accordance with ČSN IEC 742+A1 standards. All kinds of sensors can be connected to these sources in random combinations, as can other devices with a supply voltage of 12 V, 50 Hz (total power requirement either 20 VA, 50 VA or 36 VA). 

ZAC 1/20 and ZAC 1/50 are independent sources, 1/36L ZAC is the source for the location on the DIN-rail (4 modules).

 

 
Version types
ZAC 1/20 - source of power supply with output 20 VA
ZAC 1/50 - source of power supply with output 50 VA
ZAC 1/36L - source of power supply with output 36 VA
 
Source of power supply can be placed at a maximum distance of 30 m from the connected appliance. 
 
Basic technical information
Input voltage: 230 V, 50 Hz
Output voltage: 12 V, 50 Hz
Power requirement: 20 VA (ZAC 1/20)
  50 VA (ZAC 1/50)
  36 VA (ZAC 1/36L)
Electricity protection: IP 55 (ZAC 1/20, ZAC 1/50)
  IP 20 (ZAC 1/36L)
Weight: 0,8 kg (ZAC 1/20, ZAC 1/36L)
  1,2 kg (ZAC 1/50)
 
 
Requirements for setting up the construction
ZAC 1/20, ZAC 1/50
  1. Set-up supply of electricity 230 V,50 Hz – cable CYKY 3Cx1,5
  2. Set-up niche for flush mounting – size as per installed source
  3. Distribution to each device is carried out by cable CYKY 2Ax1,5
ZAC 1/36 L
  1. It is installed on the DIN-rail - width of 4 modules
 
 
Figure
ZAC 1/20
 
ZAC 1/50
 
 
 
 
 
Product title
ZAC 1/20 - 
power supply for up to 3 devices - 230V, 50Hz
ZAC 1/50 - 
power supply for up to 8 devices - 230V, 50Hz
ZAC 1/36L - 
power supply for up to 6 devices - 230V, 50Hz
Tootekood: AZP-ZAC 1-20 ,   Tarneaeg: 3-4 nädalad
105,00 €

R/V teras WC pott ja valamu

AISI304 paksus 1,5 mm

Kinnitus poltidega läbi seina

Loputus ühendus 1"

WC äravool 100mm

Valamu ärravool 32mm

 

NB! Vee mehhanismid on vaja tellida eraldi

 

Tootekood: PCOMP-TP ,   Tarneaeg: 6-7 nädalad
2562,00 €

R/V teras WC pott ja valamu

AISI304 paksus 1,5 mm

Kinnitus poltidega läbi seina

Loputus ühendus 1"

WC äravool 100mm

Valamu ärravool 32mm

 

NB! Vee mehhanismid on vaja tellida eraldi

 

Tootekood: PCOMP-003TS ,   Tarneaeg: 6-7 nädalad
2562,00 €

R/V teras WC pott ja valamu

AISI304 paksus 1,5 mm

Kinnitus poltidega läbi seina

Loputus ühendus 1"

WC äravool 100mm

Valamu ärravool 32mm

 

NB! Vee mehhanismid on vaja tellida eraldi

 

Tootekood: PCOMP-TV ,   Tarneaeg: 6-7 nädalad
2928,00 €

Protective corner 
Ref. 100209

Adhesive protective corners supplied with double-sided adhesive tape. 
Made from elastomer plastic. 
Sold in packs of 2. 
Grey, RAL no. 7015.

Tootekood: DE-100209 ,   Tarneaeg: 14-21 päeva
55,92 €

Surgical scrub up trough with low splashback

Ref. 181020

Wall-mounted surgical scrub up trough with low, 100mm splashback. 
Suitable for hospitals and healthcare facilities. 
Bacteriostatic 304 stainless steel. Polished satin finish. Stainless steel thickness: 1.2mm. 
L. 700mm, 1 service. With no tap hole.
Smooth surface and rounded inside edges for easy cleaning. 
Drainage on the right. Without overflow. Supplied with fixing elements. 
Weight: 10.6kg. 
 

TECHNICAL CHARACTERISTICS

Surgical scrub up trough with low splashback

Ref. 181020
Height 465mm
Length 455mm
Width 700mm
Thickness 1.2mm
Finish 304 polished satin stainless steel
Tootekood: DE-181020 ,   Tarneaeg: 3-4 nädala
1842,00 €
Kirurgiline puhastusrenn madala pritsmetega
 
Ref. 182020
 
Seinale paigaldatav kirurgiline puhastusrenn 100 mm pritsmetega.
Sobib haiglate ja tervishoiuasutuste jaoks.
Roostevaba teras bakteriostaatiline 304. Poleeritud satiinviimistlus. Roostevabast terasest paksus: 1,2 mm.
L. 1400mm, 2 teenust. Ilma kraanaauguta.
Sile pind ja ümardatud siseservad lihtsaks puhastamiseks.
Drenaaž paremal. Ilma ülevooluta. Kaasas kinnitusdetailid.
Kaal: 18,8 kg.

 

Surgical scrub up trough with low splashback

Ref. 182020

Wall-mounted surgical scrub up trough with splashback 100mm. 
Suitable for hospitals and healthcare facilities. 
Bacteriostatic 304 stainless steel. Polished satin finish. Stainless steel thickness: 1.2mm. 
L. 1,400mm, 2 services. With no tap hole.
Smooth surface and rounded inside edges for easy cleaning.
Drainage on the right. Without overflow. Supplied with fixing elements. 
Weight: 18.8kg. 
 

TECHNICAL CHARACTERISTICS

Surgical scrub up trough with low splashback

Ref. 182020
Height 465mm
Length 455mm
Width 1400mm
Thickness 1.2mm
Finish 304 polished satin stainless steel
Хирургическая скраб-корыто с низким фартуком
 
Ref. 182020
 
Настенный хирургический корыто с фартуком 100 мм.
Подходит для больниц и медицинских учреждений.
Бактериостатическая нержавеющая сталь 304. Полированная атласная отделка. Толщина нержавеющей стали: 1,2 мм.
Л. 1400мм, 2 серв. Без отверстия под смеситель.
Гладкая поверхность и закругленные внутренние края для легкой очистки.
Дренаж справа. Без перелива. Поставляется с крепежными элементами.
Вес: 18,8 кг.
Tootekood: DE-182020 ,   Tarneaeg: 3-4 nädala
2600,00 €

Delabie 512111P antivandaalne elektrooniline vedel- või vahtseebi dosaator,  harj. rst

Electronic liquid or foam soap dispenser

Seinale paigaldatav elektrooniline seebi dosaator.
Vedel- või vahtseebi dosaator.
Vandaalikindel mudel ristseinale (TC) kuni 110mm.
Käsitsi kontakti pole: infrapunarakk tuvastab käed automaatselt.
Kroomitud 304 roostevabast terasest tila.
Iseseisev elektrooniline seade paigaldamiseks valamu alla või teeninduskanalisse.
Automaatne seebi dosaator: vooluvõrk 230/6V trafoga.
Taimepõhise vedelseebi jaoks maksimaalse viskoossusega 3000 mPa.s või spetsiaalsele vahtseebile.
Tila kogupikkus: 115 mm.
Tarnitakse 1,20 m painduva toruga kaugpaakide jaoks.
 
Настенный электронный дозатор для мыла.
Дозатор для жидкого или пенного мыла.
Антивандальная модель для поперечной стены (TC) до 110 мм.
Нет ручного контакта: инфракрасная ячейка автоматически обнаруживает руки.
Носик из хромированной нержавеющей стали 304.
Независимый электронный блок для установки под умывальником или в канале обслуживания.
Автоматический дозатор мыла: питание от сети с трансформатором 230/6В.
Для жидкого мыла на растительной основе с максимальной вязкостью 3000 мПа·с или специального пенного мыла.
Общая длина носика: 115 мм.
Поставляется с гибкой трубкой длиной 1,20 м для удаленных резервуаров.

 

 

Ref. 512111P

Wall-mounted electronic soap dispenser. 
Liquid or foam soap dispenser.
Vandal-resistant model for cross wall (TC) up to 110mm. 
No manual contact: infrared cell detects hands automatically. 
Chrome-plated 304 stainless steel spout. 
No waste pump dispenser.
Independent electronic unit for installation beneath the washbasin or in a service duct.
Automatic soap dispenser: mains supply with 230/6V transformer.
For vegetable-based liquid soap with maximum viscosity of 3,000 mPa.s or specific foam soap.
Total spout length: 115mm. 
Supplied with 1.20m flexible tube for remote tanks. 
 

TECHNICAL CHARACTERISTICS

Electronic liquid or foam soap dispenser

Ref. 512111P
Supply Mains supply 230/6V
Connector 1/2"
Technology Infrared detection
Height 115mm (electronic unit)
Length 115mm
Spout length 98mm
Finish Chrome-plated 304 stainless steel
Tootekood: DE-512111P ,   Tarneaeg: 14-21 päeva
427,00 €

COMMISSARIAT stainless steel washbasin for recessed installation 
Ref. 160330

Wall-mounted washbasin, cross wall installation for service ducts.
Interior basin dimensions: 290 x 290 x 350mm.
Bacteriostatic 304 stainless steel. 
Stainless steel thickness: 2mm.
Rounded edges prevent injury.
Suitable for prisons, police stations, etc.
Vandal-resistant: water inlet and outlet cannot be accessed by user. 
Supplied without water controls. We recommend electronic control: ref. 447100.
Weight: 12.5kg.

 

TECHNICAL FEATURES 

COMMISSARIAT stainless steel washbasin for recessed installation 
Ref. 160330

Depth 350mm
Length 290mm
Width 290mm
Thickness 2mm
Finish Polished satin 304 stainless steel
Tootekood: DE-160330 ,   Tarneaeg: 14-21 päeva
841,80 €

DESCRIPTION

Recessed shower tray 
Ref. 150100

Recessed shower tray, 700 x 700mm. 
Bacteriostatic 304 stainless steel. 
Polished satin finish. 
Stainless steel thickness: 1.2mm. 
One-piece pressed shower tray, seam-free for easy maintenanceand better hygiene. 
Rounded internal corners for improved safety in the shower. 
Drainage slope. 
Supplied with 1 ½" waste. 
Non-slip surface. 
CE marked. Complies with European standard EN 14527. 
Weight: 5.5kg. 

TECHNICAL FEATURES 

Recessed shower tray 
Ref. 150100

Depth 60mm
Length 700mm
Width 700mm
Thickness 1.2mm
Finish 304 polished satin stainless steel
Tootekood: DE-150100 ,   Tarneaeg: 14-21 päeva
384,30 €

DESCRIPTION

Recessed shower tray 
Ref. 150300

Recessed shower tray, 800 x 800mm. 
Bacteriostatic 304 stainless steel. 
Polished satin finish. 
Stainless steel thickness: 1.2mm. 
One-piece pressed shower tray, seam-free for easy maintenanceand better hygiene. 
Rounded internal corners for improved safety in the shower. 
Drainage slope. 
Supplied with 1 ½" waste. 
Non-slip surface. 
CE marked. Complies with European standard EN 14527. 
Weight: 7kg. 

 

TECHNICAL FEATURES 

Recessed shower tray 
Ref. 150300

Depth 60mm
Length 800mm
Width 800mm
Thickness 1.2mm
Finish 304 polished satin stainless steel
Tootekood: DE-150300 ,   Tarneaeg: 14-21 päeva
469,70 €

DESCRIPTION

PMR recessed shower tray 
Ref. 150500

Recessed shower tray, 800 x 800mm. 
Suitable for people with reduced mobility: slimline shower tray. 
Bacteriostatic 304 stainless steel. 
Polished satin finish. 
Stainless steel thickness: 1.5mm 
Drainage slope. 
Supplied with 1 ½" waste. 
Non-slip surface. 
CE marked. Complies with European standard EN 14527. 
Weight: 8.5kg. 

TECHNICAL FEATURES 

PMR recessed shower tray 
Ref. 150500

Depth 30mm
Length 800mm
Width 800mm
Thickness 1.5mm
Finish 304 polished satin stainless steel
Tootekood: DE-150500 ,   Tarneaeg: 14-21 päeva
707,60 €

DESCRIPTION

PMR recessed shower tray 
Ref. 150600

Recessed shower tray, 900 x 900mm. 
Suitable for people with reduced mobility: slimline shower tray. 
Bacteriostatic 304 stainless steel. 
Polished satin finish. 
Stainless steel thickness: 1.5mm 
Drainage slope. 
Supplied with 1 ½" waste. 
Non-slip surface. 
CE marked. Complies with European standard EN 14527. 
Weight: 9.5kg. 

 

TECHNICAL FEATURES 

PMR recessed shower tray 
Ref. 150600

Depth 30mm
Length 900mm
Width 900mm
Thickness 1.5mm
Finish 304 polished satin stainless steel
Tootekood: DE-150600 ,   Tarneaeg: 14-21 päeva
805,20 €

Delabie Hügieeniline valamu kõrge tagaseinaga. RST AISI 304 L500

ref.188000

Kirjeldus:
Hügieeniline seinakinnitusega valamu Ref. 188000 on loodud vastama meditsiiniasutuste ja haiglate kõrgetele standarditele. Valamu on varustatud 450 mm kõrge tagaservaga, mis tagab tõhusa pritsmekaitse ja hõlpsa puhastamise. Valmistatud 1,2 mm paksusest 304 roostevabast terasest, millel on poleeritud satiinviimistlus ja bakterite kasvu takistavad omadused. Selle sügav kauss vähendab pritsmete riski, pakkudes mugavat kätepesukogemust.

Peamised omadused:

  • Kõrgus: 665 mm, pikkus: 450 mm, laius: 500 mm
  • Poleeritud satiinviimistlus, 304 roostevaba teras
  • Sujuvad servad ja sügav kauss lihtsaks puhastamiseks
  • CE-märgisega, vastab Euroopa standardile EN 14688
  • Varustatud 1¼" äravooluga, ilma ülevooluta
  • Kaal: 10,2 kg
Tootekood: DE-188000 ,   Tarneaeg: 3-4 nädala
1140,00 €

Delabie Joogifontöön ILHA H-915mm R-V teras

Floor-standing ILHA drinking fountain

Ref. 180100

Floor-standing drinking fountain.
Bacteriostatic 304 stainless steel. Polished satin finish. Stainless steel thickness: 0.8mm.
Height: 915mm.
Supplied with bubbler tap: chrome-plated, instant shut-offand adjustable flow rate, inlet M⅜".
Flat perforated waste, without screws:easy to clean and vandal-resistant.
Recessed vertical water outlet. Waste outlet 1¼".
Supplied with fixing elements.
Weight: 9.6kg.
 

TECHNICAL CHARACTERISTICS

Floor-standing ILHA drinking fountain

Ref. 180100
Height 915mm
Length 320mm
Width 320mm
Thickness 0.8mm
Finish 304 polished satin stainless steel
Tootekood: DE-180100 ,   Tarneaeg: 14-21 päeva
959,00 €
Projektide hinnapäringud ja tooteinfo kättesaadavusega seotud küsimused palume saata e-mailile info@pegu.ee