6 l/min with integrated flow limiter. Anti-water-hammering device Fixed rotating shower head with anti-limescale spikes
> Flow time :
30 seconds (± 5 sec.)
> Hydraulic supply :
G 1/2" (15x21), top or rear water inlet. For rear water inlet, we recommend to add the adaptation kit under the reference 91026 On P 50 tap NF II with cold water or pre-mixed water
Wide opening panel without the need to dismantle from the wall and shower taps on a removable valve plate
> Thermal resistance :
Resistant to a temperature of 75°C for 30-minute-thermal-shocks
> Security :
"Legionella" version: pre-equipped for PRESTO solutions Non turnable push button. Non-removable, wear-proof red marker
> Delivered with :
1/2" hoses with revolving nuts MM 1/2" (15x21) straight stop valves and 250 micron filters Fastening screws and instruction manual
> Standards & approvals :
Brass body in accordance with EN 1982, EN 12164, EN 12165 Chrome-plated surface treatment in accordance with EN 12540 200-hour neutral salt spray resistant (NSS) in concordance with ISO 9227
Taimekaitsevahendite ja leheväetiste pritsimiseks koduaias ja väiksemas istanduses
AKUPRITS
micro USB
Taimede pritsimiseks ja umbrohutõrjeks koduaedades.
Li-ion akuga väike aiaprits 2l.
Sobib toa- ja aiataimede hooldamiseks.Samuti rinevate pindade, seinte ning klaasi töötlemiseks ja puhastamiseks. • Tööaeg ühe laadimisega kuni 120 minutit. • Maksimaalne vedeliku tarbimine 0.2 l/min.
PEGU.EE - Roostevabast Terasest Segistid ja Kraanid Sinu Kööki või Vannituppa!
Otsid stiilseid ja vastupidavaid segisteid ning kraane oma kööki või vannituppa? PEGU.EE e-pood pakub laias valikus kvaliteetseid roostevabast terasest segisteid ja kraane, mis lisavad sinu interjöörile moodsust ja vastupidavust.
Miks valida PEGU.EE roostevabast terasest segistid ja kraanid?
Elegantne Disain: Meie valikus on erinevaid stiile ja disainilahendusi, sobides igasse interjööri.
Vastupidav Materjal: Roostevaba teras tagab segistite ja kraanide pikaajalise vastupidavuse ja kvaliteedi.
Lihtne Puhastada: Roostevaba teras on hõlpsasti hooldatav ja puhastatav materjal.
Mitmekülgne Kasutus: Sobivad suurepäraselt nii kööki kui ka vannituppa, olles funktsionaalsed ja pilkupüüdvad.
Kuidas tellida?
Külasta PEGU.EE e-poodi ja sirvi meie roostevabast terasest segistite ja kraanide valikut.
Vali sobiv toode ning lisa see ostukorvi.
Jätka ostuprotsessi, sisestades vajalikud andmed.
Vali mugav makseviis ja kinnita tellimus.
PEGU.EE-st tellides saad kindel olla, et valid vastupidavad, stiilsed ja funktsionaalsed segistid ning kraanid. Tutvu meie valikuga juba täna!
Suur valik kvaliteetseid segisteid ja vannitoaaksessuaare parimatelt tootjatelt! Santehnika müük soodsa hinnaga ja kiire tarnega. Vajadusel vormistame ka e-arve!
Acoustic class II Chrome-plated brass body compliant with standards NF EN1982 / NF EN12164 / NF EN12165 Nickel-Chrome surface treatment compliant with NF EN12540 Neutral Salt Spray (NSS) resistant: 200 h according to NF ISO 9227
Ref: 65305 - PRESTO NEO S® Stainless Steel deck-mounted tap - 7 sec. (PRESTOGREEN)
120
G1/2" 100
> Working pressure:
1 to 5 bar
> Flow:
3 l/min at 3 bars - 4-position setting Anti water-hammer system
> Flow time:
7 seconds
> Hydraulic supply:
G 1/2'' x 40 - hot or premixed water
> Thermal resistance:
This tap can withstand a thermal shock of 75°C for 30 minutes as part of a thermal shock programme
> Safety:
With S® antiblocking system to prevent blocking in continuous flow Interchangeable head and non-turnable push button to avoid premature wear Non-removable red circled marker
Ref: 66305 - PRESTO NEO S® Stainless Steel wall-mounted tap - 7 sec. (PRESTOGREEN)
G1/2
65 15 104
> Working pressure:
1 to 5 bar
> Flow:
3 l/min at 3 bars - 4-position setting Anti water-hammer system
> Flow time:
7 seconds
> Hydraulic supply:
G 1/2" x 15 - hot or premixed water
> Dimensions :
65mm projection
> Thermal resistance:
This tap can withstand a thermal shock of 75°C for 30 minutes as part of a thermal shock programme
> Safety:
With S® antiblocking system to prevent blocking in continuous flow Interchangeable head and non-turnable push button to avoid premature wear Non-removable red circled marker
> Delivered with:
1 Installation manual
> Standards / Approvals:
Stainless steel body (304 L) Neutral Salt Spray (NSS) resistant: 200 h according to NF ISO 9227
Ref: 65210 - PRESTO NEO S® Stainless Steel deck-mounted tap - 7 sec. (PRESTOGREEN)
120
G1/2" 100
> Working pressure:
1 to 5 bar
> Flow:
3 l/min at 3 bars - 4-position setting Anti water-hammer system
> Flow time:
7 seconds
> Hydraulic supply:
G 1/2'' x 40 - cold water
> Thermal resistance:
This tap can withstand a thermal shock of 75°C for 30 minutes as part of a thermal shock programme
> Safety:
With S® antiblocking system to prevent blocking in continuous flow Interchangeable head and non-turnable push button to avoid premature wear Non-removable blue circled marker
Ref: 66220 - PRESTO NEO S® Stainless Steel wall-mounted tap - 7 sec. (PRESTOGREEN)
G1/2
65 15 104
> Working pressure:
1 to 5 bar
> Flow:
3 l/min at 3 bars - 4-position setting Anti water-hammer system
> Flow time:
7 seconds
> Hydraulic supply:
G 1/2" x 15 - cold water
> Dimensions :
65mm projection
> Thermal resistance:
This tap can withstand a thermal shock of 75°C for 30 minutes as part of a thermal shock programme
> Safety:
With S® antiblocking system to prevent blocking in continuous flow Interchangeable head and non-turnable push button to avoid premature wear Non-removable blue circled marker
> Delivered with:
1 Installation manual
> Standards / Approvals:
Stainless steel body (304 L) Neutral Salt Spray (NSS) resistant: 200 h according to NF ISO 9227
Valamusegist Wagner Ewar kõrge, pikk käepide Roostevabast terasest AISI303 harjatud
BASIN TAP WA 110-1
Ø 45 x 283 x 185 mm normal pressure
Single-lever basin tap without waste fitting in robust, germ-reducing and easy-care stainless steel (AISI 303).
Version: normal pressure. Operating pressure 2–6 bar.
Solid stainless steel body; visible surfaces satin finished. Further available surfaces: see below.
High quality ceramic mixer cartridge with adjustable temperature limit setting (scald protection).
Neoperl® air bubble spray M21 x 1 mm.
Design height: 283 mm Outlet height: 199 mm Projection: 98 mm Length of lever: 140 mm
Wear parts can be replaced as modules.
Installation dimensions: Ø 33-40 mm Surface thickness max. 40 mm
Mounting: With one counternut.
Delivery includes fixing material and two flexible connecting hoses clad in stainless steel.
Weight (in kg): 1,70
AVAILABLE SURFACES
ORDER NUMBERS
satin finished (standard)
925276
highly polished
932276
Suggested text for specifications:
Single-lever basin tap in stainless steel (AISI 303) for counter mounting. Version: normal pressure. Solid stainless steel body; visible surfaces satin finished. Ceramic mixer cartridge with adjustable temperature limit setting. Delivery includes fixing material and two flexible connecting hoses clad in stainless steel.
Dimensions: Ø 52 x 283 x 185 mm Outlet height 199 mm Projection 98 mm Length of lever 140 mm
Single-lever basin tap without waste fitting in robust, germ-reducing and easy-care stainless steel (AISI 303).
Version: normal pressure. Operating pressure 2–6 bar.
Solid stainless steel body; visible surfaces satin finished. Further available surfaces: see below.
High quality ceramic mixer cartridge with adjustable temperature limit setting (scald protection).
Neoperl® air bubble spray M21 x 1 mm.
Design height: 283 mm Outlet height: 199 mm Projection: 98 mm Length of lever: 140 mm
Wear parts can be replaced as modules.
Installation dimensions: Ø 33-40 mm Surface thickness max. 40 mm
Mounting: With one counternut.
Delivery includes fixing material and two flexible connecting hoses clad in stainless steel.
Weight (in kg): 1,70
AVAILABLE SURFACES
ORDER NUMBERS
satin finished (standard)
925276
highly polished
932276
Suggested text for specifications:
Single-lever basin tap in stainless steel (AISI 303) for counter mounting. Version: normal pressure. Solid stainless steel body; visible surfaces satin finished. Ceramic mixer cartridge with adjustable temperature limit setting. Delivery includes fixing material and two flexible connecting hoses clad in stainless steel.
Dimensions: Ø 52 x 283 x 185 mm Outlet height 199 mm Projection 98 mm Length of lever 140 mm
Single-lever basin tap without waste fitting in robust, germ-reducing and easy-care stainless steel (AISI 303).
Version: normal pressure. Operating pressure 2–6 bar.
Solid stainless steel body; visible surfaces satin finished. Further available surfaces: see below.
High quality ceramic mixer cartridge with adjustable temperature limit setting (scald protection).
Neoperl® air bubble spray M21 x 1 mm.
Design height: 283 mm Outlet height: 199 mm Projection: 98 mm Length of lever: 140 mm
Wear parts can be replaced as modules.
Installation dimensions: Ø 33-40 mm Surface thickness max. 40 mm
Mounting: With one counternut.
Delivery includes fixing material and two flexible connecting hoses clad in stainless steel.
Weight (in kg): 1,70
AVAILABLE SURFACES
ORDER NUMBERS
satin finished (standard)
925276
highly polished
932276
Suggested text for specifications:
Single-lever basin tap in stainless steel (AISI 303) for counter mounting. Version: normal pressure. Solid stainless steel body; visible surfaces satin finished. Ceramic mixer cartridge with adjustable temperature limit setting. Delivery includes fixing material and two flexible connecting hoses clad in stainless steel.
Dimensions: Ø 52 x 283 x 185 mm Outlet height 199 mm Projection 98 mm Length of lever 140 mm
Single-lever basin tap without waste fitting in robust, germ-reducing and easy-care stainless steel (AISI 303).
Version: normal pressure. Operating pressure 2–6 bar.
Solid stainless steel body; visible surfaces satin finished. Further available surfaces: see below.
High quality ceramic mixer cartridge with adjustable temperature limit setting (scald protection).
Neoperl® air bubble spray M21 x 1 mm.
Design height: 283 mm Outlet height: 199 mm Projection: 98 mm Length of lever: 40 mm
Wear parts can be replaced as modules.
Installation dimensions: Ø 33-40 mm Surface thickness max. 40 mm
Mounting: With one counternut.
Delivery includes fixing material and two flexible connecting hoses clad in stainless steel.
Weight (in kg): 1,70
AVAILABLE SURFACES
ORDER NUMBERS
satin finished (standard)
925266
highly polished
932266
Suggested text for specifications:
Single-lever basin tap in stainless steel (AISI 303) for counter mounting. Version: normal pressure. Solid stainless steel body; visible surfaces satin finished. Ceramic mixer cartridge with adjustable temperature limit setting. Delivery includes fixing material and two flexible connecting hoses clad in stainless steel.
Dimensions: Ø 52 x 283 x 155 mm Outlet height 199 mm Projection 98 mm Length of lever 40 mm
Single-lever basin tap without waste fitting in robust, germ-reducing and easy-care stainless steel (AISI 303).
Version: normal pressure. Operating pressure 2–6 bar.
Solid stainless steel body; visible surfaces satin finished. Further available surfaces: see below.
High quality ceramic mixer cartridge with adjustable temperature limit setting (scald protection).
Neoperl® air bubble spray M21 x 1 mm.
Design height: 283 mm Outlet height: 199 mm Projection: 98 mm Length of lever: 40 mm
Wear parts can be replaced as modules.
Installation dimensions: Ø 33-40 mm Surface thickness max. 40 mm
Mounting: With one counternut.
Delivery includes fixing material and two flexible connecting hoses clad in stainless steel.
Weight (in kg): 1,70
AVAILABLE SURFACES
ORDER NUMBERS
satin finished (standard)
925266
highly polished
932266
Suggested text for specifications:
Single-lever basin tap in stainless steel (AISI 303) for counter mounting. Version: normal pressure. Solid stainless steel body; visible surfaces satin finished. Ceramic mixer cartridge with adjustable temperature limit setting. Delivery includes fixing material and two flexible connecting hoses clad in stainless steel.
Dimensions: Ø 52 x 283 x 155 mm Outlet height 199 mm Projection 98 mm Length of lever 40 mm
Single-lever basin tap without waste fitting in robust, germ-reducing and easy-care stainless steel (AISI 303).
Version: low pressure, suitable for unpressurised tanks. Operating pressure 2–6 bar.
Solid stainless steel body; visible surfaces satin finished. Further available surfaces: see below.
High quality ceramic mixer cartridge with adjustable temperature limit setting (scald protection).
Neoperl® air bubble spray M21 x 1 mm.
Design height: 283 mm Outlet height: 199 mm Projection: 98 mm Length of lever: 40 mm
Wear parts can be replaced as modules.
Installation dimensions: Ø 33-40 mm, surface thickness max. 40 mm
Mounting: With one counternut.
Delivery includes fixing material and three flexible connecting hoses clad in stainless steel.
Weight (in kg): 2,00
AVAILABLE SURFACES
ORDER NUMBERS
satin finished (standard)
925267
highly polished
932267
Suggested text for specifications:
Single-lever basin tap in stainless steel (AISI 303) for counter mounting. Version: low pressure. Solid stainless steel body; visible surfaces satin finished. Ceramic mixer cartridge with adjustable temperature limit setting. Delivery includes fixing material and three flexible connecting hoses clad in stainless steel.
Dimensions: Ø 52 x 283 x 155 mm Outlet height 199 mm Projection 98 mm Length of lever 40 mm
Single-lever basin tap without waste fitting in robust, germ-reducing and easy-care stainless steel (AISI 303).
Version: low pressure, suitable for unpressurised tanks. Operating pressure 2–6 bar.
Solid stainless steel body; visible surfaces satin finished. Further available surfaces: see below.
High quality ceramic mixer cartridge with adjustable temperature limit setting (scald protection).
Neoperl® air bubble spray M21 x 1 mm.
Design height: 283 mm Outlet height: 199 mm Projection: 98 mm Length of lever: 140 mm
Wear parts can be replaced as modules.
Installation dimensions: Ø 33-40 mm, surface thickness max. 40 mm
Mounting: With one counternut.
Delivery includes fixing material and three flexiblen, stainless steel covered connecting tubes.
Weight (in kg): 2,00
AVAILABLE SURFACES
ORDER NUMBERS
satin finished (standard)
925277
highly polished
932277
Suggested text for specifications:
Single-lever basin tap in stainless steel (AISI 303) for counter mounting. Version: low pressure. Solid stainless steel body; visible surfaces satin finished. Ceramic mixer cartridge with adjustable temperature limit setting. Delivery includes fixing material and three flexible connecting hoses clad in stainless steel.
Dimensions: Ø 52 x 283 x 185 mm Outlet height 199 mm Projection 98 mm Length of lever 140 mm
Single-lever basin tap without waste fitting in robust, germ-reducing and easy-care stainless steel (AISI 303).
Version: low pressure, suitable for unpressurised tanks. Operating pressure 2–6 bar.
Solid stainless steel body; visible surfaces satin finished. Further available surfaces: see below.
High quality ceramic mixer cartridge with adjustable temperature limit setting (scald protection).
Neoperl® air bubble spray M21 x 1 mm.
Design height: 283 mm Outlet height: 199 mm Projection: 98 mm Length of lever: 40 mm
Wear parts can be replaced as modules.
Installation dimensions: Ø 33-40 mm, surface thickness max. 40 mm
Mounting: With one counternut.
Delivery includes fixing material and three flexible connecting hoses clad in stainless steel.
Weight (in kg): 2,00
AVAILABLE SURFACES
ORDER NUMBERS
satin finished (standard)
925267
highly polished
932267
Suggested text for specifications:
Single-lever basin tap in stainless steel (AISI 303) for counter mounting. Version: low pressure. Solid stainless steel body; visible surfaces satin finished. Ceramic mixer cartridge with adjustable temperature limit setting. Delivery includes fixing material and three flexible connecting hoses clad in stainless steel.
Dimensions: Ø 52 x 283 x 155 mm Outlet height 199 mm Projection 98 mm Length of lever 40 mm
Single-lever basin tap without waste fitting in robust, germ-reducing and easy-care stainless steel (AISI 303).
Version: low pressure, suitable for unpressurised tanks. Operating pressure 2–6 bar.
Solid stainless steel body; visible surfaces satin finished. Further available surfaces: see below.
High quality ceramic mixer cartridge with adjustable temperature limit setting (scald protection).
Neoperl® air bubble spray M21 x 1 mm.
Design height: 283 mm Outlet height: 199 mm Projection: 98 mm Length of lever: 140 mm
Wear parts can be replaced as modules.
Installation dimensions: Ø 33-40 mm, surface thickness max. 40 mm
Mounting: With one counternut.
Delivery includes fixing material and three flexiblen, stainless steel covered connecting tubes.
Weight (in kg): 2,00
AVAILABLE SURFACES
ORDER NUMBERS
satin finished (standard)
925277
highly polished
932277
Suggested text for specifications:
Single-lever basin tap in stainless steel (AISI 303) for counter mounting. Version: low pressure. Solid stainless steel body; visible surfaces satin finished. Ceramic mixer cartridge with adjustable temperature limit setting. Delivery includes fixing material and three flexible connecting hoses clad in stainless steel.
Dimensions: Ø 52 x 283 x 185 mm Outlet height 199 mm Projection 98 mm Length of lever 140 mm
Single-lever basin tap without waste fitting in robust, germ-reducing and easy-care stainless steel (AISI 303).
Version: low pressure, suitable for unpressurised tanks. Operating pressure 2–6 bar.
Solid stainless steel body; visible surfaces satin finished. Further available surfaces: see below.
High quality ceramic mixer cartridge with adjustable temperature limit setting (scald protection).
Neoperl® air bubble spray M21 x 1 mm.
Design height: 171 mm Outlet height: 87 mm Projection: 98 mm Length of lever: 40 mm
Wear parts can be replaced as modules.
Installation dimensions: Ø 33-40 mm Surface thickness max. 40 mm
Mounting: With one counternut.
Delivery includes fixing material and three flexible connecting hoses clad in stainless steel.
Weight (in kg): 1,90
AVAILABLE SURFACES
ORDER NUMBERS
satin finished (standard)
924267
highly polished
931267
Suggested text for specifications:
Single-lever basin tap in stainless steel (AISI 303) for counter mounting. Version: low pressure. Solid stainless steel body; visible surfaces satin finished. Ceramic mixer cartridge with adjustable temperature limit setting. Delivery includes fixing material and three flexible connecting hoses clad in stainless steel.
Dimensions: Ø 52 x 171 x 155 mm Outlet height 87 mm Projection 98 mm Length of lever 40 mm
Single-lever basin tap without waste fitting in robust, germ-reducing and easy-care stainless steel (AISI 303).
Version: low pressure, suitable for unpressurised tanks. Operating pressure 2–6 bar.
Solid stainless steel body; visible surfaces satin finished. Further available surfaces: see below.
High quality ceramic mixer cartridge with adjustable temperature limit setting (scald protection).
Neoperl® air bubble spray M21 x 1 mm.
Design height: 171 mm Outlet height: 87 mm Projection: 98 mm Length of lever: 140 mm
Wear parts can be replaced as modules.
Installation dimensions: Ø 33-40 mm Surface thickness max. 40 mm
Mounting: With one counternut.
Delivery includes fixing material and three flexible connecting hoses clad in stainless steel.
Weight (in kg): 1,90
AVAILABLE SURFACES
ORDER NUMBERS
satin finished (standard)
924277
highly polished
931277
Suggested text for specifications:
Single-lever basin tap in stainless steel (AISI 303) for counter mounting. Version: low pressure. Solid stainless steel body; visible surfaces satin finished. Ceramic mixer cartridge with adjustable temperature limit setting. Delivery includes fixing material and three flexible connecting hoses clad in stainless steel.
Dimensions: Ø 52 x 171 x 185 mm Outlet height 87 mm Projection 98 mm Length of lever 140 mm
Single-lever basin tap without waste fitting in robust, germ-reducing and easy-care stainless steel (AISI 303).
Version: low pressure, suitable for unpressurised tanks. Operating pressure 2–6 bar.
Solid stainless steel body; visible surfaces satin finished. Further available surfaces: see below.
High quality ceramic mixer cartridge with adjustable temperature limit setting (scald protection).
Neoperl® air bubble spray M21 x 1 mm.
Design height: 171 mm Outlet height: 87 mm Projection: 98 mm Length of lever: 40 mm
Wear parts can be replaced as modules.
Installation dimensions: Ø 33-40 mm Surface thickness max. 40 mm
Mounting: With one counternut.
Delivery includes fixing material and three flexible connecting hoses clad in stainless steel.
Weight (in kg): 1,90
AVAILABLE SURFACES
ORDER NUMBERS
satin finished (standard)
924267
highly polished
931267
Suggested text for specifications:
Single-lever basin tap in stainless steel (AISI 303) for counter mounting. Version: low pressure. Solid stainless steel body; visible surfaces satin finished. Ceramic mixer cartridge with adjustable temperature limit setting. Delivery includes fixing material and three flexible connecting hoses clad in stainless steel.
Dimensions: Ø 52 x 171 x 155 mm Outlet height 87 mm Projection 98 mm Length of lever 40 mm
Single-lever basin tap without waste fitting in robust, germ-reducing and easy-care stainless steel (AISI 303).
Version: low pressure, suitable for unpressurised tanks. Operating pressure 2–6 bar.
Solid stainless steel body; visible surfaces satin finished. Further available surfaces: see below.
High quality ceramic mixer cartridge with adjustable temperature limit setting (scald protection).
Neoperl® air bubble spray M21 x 1 mm.
Design height: 171 mm Outlet height: 87 mm Projection: 98 mm Length of lever: 140 mm
Wear parts can be replaced as modules.
Installation dimensions: Ø 33-40 mm Surface thickness max. 40 mm
Mounting: With one counternut.
Delivery includes fixing material and three flexible connecting hoses clad in stainless steel.
Weight (in kg): 1,90
AVAILABLE SURFACES
ORDER NUMBERS
satin finished (standard)
924277
highly polished
931277
Suggested text for specifications:
Single-lever basin tap in stainless steel (AISI 303) for counter mounting. Version: low pressure. Solid stainless steel body; visible surfaces satin finished. Ceramic mixer cartridge with adjustable temperature limit setting. Delivery includes fixing material and three flexible connecting hoses clad in stainless steel.
Dimensions: Ø 52 x 171 x 185 mm Outlet height 87 mm Projection 98 mm Length of lever 140 mm
Single-lever basin tap without waste fitting in robust, germ-reducing and easy-care stainless steel (AISI 303).
Version: normal pressure. Operating pressure 2–6 bar.
Solid stainless steel body; visible surfaces satin finished. Further available surfaces: see below.
High quality ceramic mixer cartridge with adjustable temperature limit setting (scald protection).
Neoperl® air bubble spray M21 x 1 mm.
Design height: 171 mm Outlet height: 87 mm Projection: 98 mm Length of lever: 140 mm
Wear parts can be replaced as modules.
Installation dimensions: Ø 33-40 mm Surface thickness max. 40 mm
Mounting: With one counternut.
Delivery includes fixing material and two flexible connecting hoses clad in stainless steel.
Weight (in kg): 1,60
AVAILABLE SURFACES
ORDER NUMBERS
satin finished (standard)
924276
highly polished
931276
Suggested text for specifications:
Single-lever basin tap in stainless steel (AISI 303) for counter mounting. Version: normal pressure. Solid stainless steel body; visible surfaces satin finished. Ceramic mixer cartridge with adjustable temperature limit setting. Delivery includes fixing material and two flexible connecting hoses clad in stainless steel.
Dimensions: Ø 52 x 171 x 185 mm Outlet height 87 mm Projection 98 mm Length of lever 140 mm
Single-lever basin tap without waste fitting in robust, germ-reducing and easy-care stainless steel (AISI 303).
Version: normal pressure. Operating pressure 2–6 bar.
Solid stainless steel body; visible surfaces satin finished. Further available surfaces: see below.
High quality ceramic mixer cartridge with adjustable temperature limit setting (scald protection).
Neoperl® air bubble spray M21 x 1 mm.
Design height: 171 mm Outlet height: 87 mm Projection: 98 mm Length of lever: 140 mm
Wear parts can be replaced as modules.
Installation dimensions: Ø 33-40 mm Surface thickness max. 40 mm
Mounting: With one counternut.
Delivery includes fixing material and two flexible connecting hoses clad in stainless steel.
Weight (in kg): 1,60
AVAILABLE SURFACES
ORDER NUMBERS
satin finished (standard)
924276
highly polished
931276
Suggested text for specifications:
Single-lever basin tap in stainless steel (AISI 303) for counter mounting. Version: normal pressure. Solid stainless steel body; visible surfaces satin finished. Ceramic mixer cartridge with adjustable temperature limit setting. Delivery includes fixing material and two flexible connecting hoses clad in stainless steel.
Dimensions: Ø 52 x 171 x 185 mm Outlet height 87 mm Projection 98 mm Length of lever 140 mm
Single-lever basin tap without waste fitting in robust, germ-reducing and easy-care stainless steel (AISI 303).
Version: normal pressure. Operating pressure 2–6 bar.
Solid stainless steel body; visible surfaces satin finished. Further available surfaces: see below.
High quality ceramic mixer cartridge with adjustable temperature limit setting (scald protection).
Neoperl® air bubble spray M21 x 1 mm.
Design height: 171 mm Outlet height: 87 mm Projection: 98 mm Length of lever: 140 mm
Wear parts can be replaced as modules.
Installation dimensions: Ø 33-40 mm Surface thickness max. 40 mm
Mounting: With one counternut.
Delivery includes fixing material and two flexible connecting hoses clad in stainless steel.
Weight (in kg): 1,60
AVAILABLE SURFACES
ORDER NUMBERS
satin finished (standard)
924276
highly polished
931276
Suggested text for specifications:
Single-lever basin tap in stainless steel (AISI 303) for counter mounting. Version: normal pressure. Solid stainless steel body; visible surfaces satin finished. Ceramic mixer cartridge with adjustable temperature limit setting. Delivery includes fixing material and two flexible connecting hoses clad in stainless steel.
Dimensions: Ø 52 x 171 x 185 mm Outlet height 87 mm Projection 98 mm Length of lever 140 mm
Single-lever basin tap without waste fitting in robust, germ-reducing and easy-care stainless steel (AISI 303).
Version: normal pressure. Operating pressure 2–6 bar.
Solid stainless steel body; visible surfaces satin finished. Further available surfaces: see below.
High quality ceramic mixer cartridge with adjustable temperature limit setting (scald protection).
Neoperl® air bubble spray M22 x 1 mm.
Design height: 171 mm Outlet height: 87 mm Projection: 98 mm Length of lever: 40 mm
Wear parts can be replaced as modules.
Installation dimensions: Ø 33-40 mm Surface thickness max. 40 mm
Mounting: With one counternut.
Delivery includes fixing material and two flexible connecting hoses clad in stainless steel.
Weight (in kg): 1,60
AVAILABLE SURFACES
ORDER NUMBERS
satin finished (standard)
924266
highly polished
931266
Suggested text for specifications:
Single-lever basin tap in stainless steel (AISI 303) for counter mounting. Version: normal pressure. Solid stainless steel body; visible surfaces satin finished. Ceramic mixer cartridge with adjustable temperature limit setting. Delivery includes fixing material and two flexible connecting hoses clad in stainless steel.
Dimensions: Ø 52 x 171 x 155 mm Outlet height 87 mm Projection 98 mm Length of lever 40 mm
Single-lever basin tap without waste fitting in robust, germ-reducing and easy-care stainless steel (AISI 303).
Version: normal pressure. Operating pressure 2–6 bar.
Solid rectangular stainless steel body; visible surfaces satin finished. Further available surfaces: see below.
High quality ceramic mixer cartridge with adjustable temperature limit setting (scald protection).
Neoperl® air bubble spray M24 x 1 mm.
Design height: 172 mm Outlet height: 92 mm Projection: 97 mm Length of lever: 65 mm
Wear parts can be replaced as modules.
Installation dimensions: Ø 33-40 mm Surface thickness max. 40 mm
Mounting: With one counternut.
Delivery includes fixing material and two flexible connecting hoses clad in stainless steel.
Weight (in kg): 2,3
AVAILABLE SURFACES
ORDER NUMBERS
satin finished (standard)
924265
highly polished
931265
Suggested text for specifications:
Single-lever basin tap in stainless steel (AISI 303) for counter mounting. Version: normal pressure. Solid rectangular stainless steel body; visible surfaces satin finished. Ceramic mixer cartridge with adjustable temperature limit setting. Delivery includes fixing material and two flexible connecting hoses clad in stainless steel.
Dimensions: 50 x 172 x 161 mm Outlet height 92 mm Projection 97 mm Length of lever 65 mm
Single-lever basin tap without waste fitting in robust, germ-reducing and easy-care stainless steel (AISI 303).
Version: normal pressure. Operating pressure 2–6 bar.
Solid stainless steel body; visible surfaces satin finished. Further available surfaces: see below.
High quality ceramic mixer cartridge with adjustable temperature limit setting (scald protection).
Neoperl® air bubble spray M22 x 1 mm.
Design height: 171 mm Outlet height: 87 mm Projection: 98 mm Length of lever: 40 mm
Wear parts can be replaced as modules.
Installation dimensions: Ø 33-40 mm Surface thickness max. 40 mm
Mounting: With one counternut.
Delivery includes fixing material and two flexible connecting hoses clad in stainless steel.
Weight (in kg): 1,60
AVAILABLE SURFACES
ORDER NUMBERS
satin finished (standard)
924266
highly polished
931266
Suggested text for specifications:
Single-lever basin tap in stainless steel (AISI 303) for counter mounting. Version: normal pressure. Solid stainless steel body; visible surfaces satin finished. Ceramic mixer cartridge with adjustable temperature limit setting. Delivery includes fixing material and two flexible connecting hoses clad in stainless steel.
Dimensions: Ø 52 x 171 x 155 mm Outlet height 87 mm Projection 98 mm Length of lever 40 mm
Single-lever basin tap without waste fitting in robust, germ-reducing and easy-care stainless steel (AISI 303).
Version: normal pressure. Operating pressure 2–6 bar.
Solid rectangular stainless steel body; visible surfaces satin finished. Further available surfaces: see below.
High quality ceramic mixer cartridge with adjustable temperature limit setting (scald protection).
Neoperl® air bubble spray M24 x 1 mm.
Design height: 172 mm Outlet height: 92 mm Projection: 97 mm Length of lever: 65 mm
Wear parts can be replaced as modules.
Installation dimensions: Ø 33-40 mm Surface thickness max. 40 mm
Mounting: With one counternut.
Delivery includes fixing material and two flexible connecting hoses clad in stainless steel.
Weight (in kg): 2,3
AVAILABLE SURFACES
ORDER NUMBERS
satin finished (standard)
924265
highly polished
931265
Suggested text for specifications:
Single-lever basin tap in stainless steel (AISI 303) for counter mounting. Version: normal pressure. Solid rectangular stainless steel body; visible surfaces satin finished. Ceramic mixer cartridge with adjustable temperature limit setting. Delivery includes fixing material and two flexible connecting hoses clad in stainless steel.
Dimensions: 50 x 172 x 161 mm Outlet height 92 mm Projection 97 mm Length of lever 65 mm
