UUDIS! Kontaktivaba sensoriga rollpaberidosaatorid Roostevaba teras

Kätepaberidosaator sensoriga Wagner Ewar 1 roll pattareiga R/V teras poleeritud
ELECTRONIC TOUCH-FREE PAPER ROLL DISPENSER BATTERY POWERED WP 1301
350 x 448 x 210 mm
1 paper roll
Choose product variant
- Sensor paper roll dispenser, battery-powered, in robust, germ-reducing and easy-care stainless steel (AISI 304).
- All-stainless steel housing; all corners fully welded, visible surfaces satin finished and brushed with tapered glossy surface at the bottom.
Further available surfaces: see below. - With touch-free operated, capacitive sensor technology, sensor distance approx. 3.5 cm. Paper length and idle time adjustable.
Battery-powered with four standard 1.5 V Mono/LR20/12 A batteries. - Designed for one paper roll with dimensions: Width 215 mm, outer diameter max. 180 mm, inner diameter 50 mm.
- Inspection slot to indicate fill level, residual roll function allows a reserve roll to be inserted before residual roll is completely used up.
- Accessible for refilling through lockable door.
- Keyed alike cylinder lock in corrosion-resistant zinc die-casting.
- Wear parts can be replaced as modules.
- Mounting: With four screws through key holes in the back wall.
- Delivery includes fixing material and first fill with one paper roll.
- Weight (in kg): 10,3
AVAILABLE SURFACES | ORDER NUMBERS |
---|---|
satin finished (standard) | 733220 |
highly polished | 730220 |
(coloured) plastic powder - coating | 729220 |
Sensor paper roll dispenser, battery-powered, in stainless steel (AISI 304) for surface mounting. All-stainless steel housing; all corners fully welded, visible surfaces satin finished and brushed with tapered glossy surface at the bottom. With touch-free operated, capacitive sensor technology. Paper length and idle time adjustable. Battery-powered with four standard 1.5 V Mono/LR20/12 A batteries. Designed for one paper roll with dimensions: Width 215 mm, outer diameter max. 180 mm, inner diameter 50 mm. Inspection slot to indicate fill level. Accessible for refilling through lockable door. Residual roll function allows a reserve roll to be inserted before residual roll is completely used up. Keyed alike cylinder lock in corrosion-resistant zinc die-casting. Delivery includes fixing material and first fill with one paper roll.
Dimensions: 350 x 448 x 210 mm
Article No. WP1301
ELECTRONIC TOUCH-FREE PAPER ROLL DISPENSER BATTERY POWERED WP 1301
350 x 448 x 210 mm
1 paper roll
Choose product variant
- Sensor paper roll dispenser, battery-powered, in robust, germ-reducing and easy-care stainless steel (AISI 304).
- All-stainless steel housing; all corners fully welded, visible surfaces satin finished and brushed with tapered glossy surface at the bottom.
Further available surfaces: see below. - With touch-free operated, capacitive sensor technology, sensor distance approx. 3.5 cm. Paper length and idle time adjustable.
Battery-powered with four standard 1.5 V Mono/LR20/12 A batteries. - Designed for one paper roll with dimensions: Width 215 mm, outer diameter max. 180 mm, inner diameter 50 mm.
- Inspection slot to indicate fill level, residual roll function allows a reserve roll to be inserted before residual roll is completely used up.
- Accessible for refilling through lockable door.
- Keyed alike cylinder lock in corrosion-resistant zinc die-casting.
- Wear parts can be replaced as modules.
- Mounting: With four screws through key holes in the back wall.
- Delivery includes fixing material and first fill with one paper roll.
- Weight (in kg): 10,3
AVAILABLE SURFACES | ORDER NUMBERS |
---|---|
satin finished (standard) | 733220 |
highly polished | 730220 |
(coloured) plastic powder - coating | 729220 |
Sensor paper roll dispenser, battery-powered, in stainless steel (AISI 304) for surface mounting. All-stainless steel housing; all corners fully welded, visible surfaces satin finished and brushed with tapered glossy surface at the bottom. With touch-free operated, capacitive sensor technology. Paper length and idle time adjustable. Battery-powered with four standard 1.5 V Mono/LR20/12 A batteries. Designed for one paper roll with dimensions: Width 215 mm, outer diameter max. 180 mm, inner diameter 50 mm. Inspection slot to indicate fill level. Accessible for refilling through lockable door. Residual roll function allows a reserve roll to be inserted before residual roll is completely used up. Keyed alike cylinder lock in corrosion-resistant zinc die-casting. Delivery includes fixing material and first fill with one paper roll.
Dimensions: 350 x 448 x 210 mm
Article No. WP1301
ELECTRONIC TOUCH-FREE PAPER ROLL DISPENSER TRANSFORMER POWERED WP 1300
350 x 448 x 210 mm
1 paper roll
Choose product variant
- Sensor paper roll dispenser, mains-operated, in robust, germ-reducing and easy-care stainless steel (AISI 304).
- All-stainless steel housing; all corners fully welded, visible surfaces satin finished and brushed with tapered glossy surface at the bottom.
Further available surfaces: see below. - With touch-free operated, capacitive sensor technology, sensor distance approx. 3.5 cm. Paper length and idle time adjustable.
Mains-operated 230 V / 50 Hz; power rating 7 Watt; mains cable on site. TÜV/GS-tested and certified. - Designed for one paper roll with dimensions:
Width 215 mm, outer diameter max. 180 mm, inner diameter 50 mm. - Inspection slot to indicate fill level, residual roll function allows a reserve roll to be inserted before residual roll is completely used up.
- Accessible for refilling through lockable door.
- Keyed alike cylinder lock in corrosion-resistant zinc die-casting.
- Wear parts can be replaced as modules.
- Mounting: With four screws through key holes in the back wall.
- Delivery includes fixing material and first fill with one paper roll.
- Weight (in kg): 10,3
AVAILABLE SURFACES | ORDER NUMBERS |
---|---|
satin finished (standard) | 733210 |
highly polished | 731210 |
(coloured) plastic powder - coating | 729210 |
Sensor paper roll dispenser, mains-operated, in stainless steel (AISI 304) for surface mounting. All-stainless steel housing; all corners fully welded, visible surfaces satin finished and brushed with tapered glossy surface at the bottom. With touch-free operated, capacitive sensor technology. Paper length and idle time adjustable. Mains-operated 230 V / 50 Hz; power rating 7 Watt; mains cable on site. TÜV/GS-tested and certified. Designed for one paper roll with dimensions: Width 215 mm, outer diameter max. 180 mm, inner diameter 50 mm. Inspection slot to indicate fill level. Accessible for refilling through lockable door. Residual roll function allows a reserve roll to be inserted before residual roll is completely used up. Keyed alike cylinder lock in corrosion-resistant zinc die-casting. Delivery includes fixing material and first fill with one paper roll.
Dimensions: 350 x 448 x 210 mm
Article No. WP1300
ELECTRONIC TOUCH-FREE PAPER ROLL DISPENSER TRANSFORMER POWERED WP 1300
350 x 448 x 210 mm
1 paper roll
Choose product variant
- Sensor paper roll dispenser, mains-operated, in robust, germ-reducing and easy-care stainless steel (AISI 304).
- All-stainless steel housing; all corners fully welded, visible surfaces satin finished and brushed with tapered glossy surface at the bottom.
Further available surfaces: see below. - With touch-free operated, capacitive sensor technology, sensor distance approx. 3.5 cm. Paper length and idle time adjustable.
Mains-operated 230 V / 50 Hz; power rating 7 Watt; mains cable on site. TÜV/GS-tested and certified. - Designed for one paper roll with dimensions:
Width 215 mm, outer diameter max. 180 mm, inner diameter 50 mm. - Inspection slot to indicate fill level, residual roll function allows a reserve roll to be inserted before residual roll is completely used up.
- Accessible for refilling through lockable door.
- Keyed alike cylinder lock in corrosion-resistant zinc die-casting.
- Wear parts can be replaced as modules.
- Mounting: With four screws through key holes in the back wall.
- Delivery includes fixing material and first fill with one paper roll.
- Weight (in kg): 10,3
AVAILABLE SURFACES | ORDER NUMBERS |
---|---|
satin finished (standard) | 733210 |
highly polished | 731210 |
(coloured) plastic powder - coating | 729210 |
Sensor paper roll dispenser, mains-operated, in stainless steel (AISI 304) for surface mounting. All-stainless steel housing; all corners fully welded, visible surfaces satin finished and brushed with tapered glossy surface at the bottom. With touch-free operated, capacitive sensor technology. Paper length and idle time adjustable. Mains-operated 230 V / 50 Hz; power rating 7 Watt; mains cable on site. TÜV/GS-tested and certified. Designed for one paper roll with dimensions: Width 215 mm, outer diameter max. 180 mm, inner diameter 50 mm. Inspection slot to indicate fill level. Accessible for refilling through lockable door. Residual roll function allows a reserve roll to be inserted before residual roll is completely used up. Keyed alike cylinder lock in corrosion-resistant zinc die-casting. Delivery includes fixing material and first fill with one paper roll.
Dimensions: 350 x 448 x 210 mm
Article No. WP1300
Kätepaberidosaator sensoriga Wagner Ewar 1+1 roll pattareiga R/V teras poleeritud
ELECTRONIC TOUCH-FREE PAPER ROLL DISPENSER WITH RESERVE ROLL BATTERY POWERED WP 1401
350 x 580 x 210 mm
1 paper roll + 1 reserve roll
Choose product variant
- Sensor paper roll dispenser with cabinet for reserve roll, battery-powered, in robust, germ-reducing and easy-care stainless steel (AISI 304).
- All-stainless steel housing; all corners fully welded, visible surfaces satin finished and brushed with tapered glossy surface at the bottom.
Further available surfaces: see below. - With touch-free operated, capacitive sensor technology, sensor distance approx. 3.5 cm.
Paper length and idle time adjustable.
Battery-powered with four standard 1.5 V Mono/LR20/12 A batteries. - Designed for one paper roll and one reserve roll with dimensions: Width 215 mm, outer diameter max. 180 mm, inner diameter 50 mm.
- Inspection slot to indicate fill level, residual roll function allows a reserve roll to be inserted before residual roll is completely used up.
- Accessible for refilling through lockable door.
- Keyed alike cylinder lock in corrosion-resistant zinc die-casting.
- Wear parts can be replaced as modules.
- Mounting: With four screws through key holes in the back wall.
- Delivery includes fixing material and first fill with one paper roll.
- Weight (in kg): 12,4
AVAILABLE SURFACES | ORDER NUMBERS |
---|---|
satin finished (standard) | 733260 |
highly polished | 732260 |
(coloured) plastic powder - coating | 728260 |
Sensor paper roll dispenser with cabinet for reserve roll, battery-powered, in stainless steel (AISI 304) for surface mounting. All-stainless steel housing; all corners fully welded, visible surfaces satin finished and brushed with tapered glossy surface at the bottom. With touch-free operated, capacitive sensor technology. Paper length and idle time adjustable. Battery-powered with four standard 1.5 V Mono/LR20/12 A batteries. Designed for one paper roll and one reserve roll with dimensions: Width 215 mm, outer diameter max. 180 mm, inner diameter 50 mm. Inspection slot to indicate fill level. Accessible for refilling through lockable door. Residual roll function allows a reserve roll to be inserted before residual roll is completely used up. Keyed alike cylinder lock in corrosion-resistant zinc die-casting. Delivery includes fixing material and first fill with one paper roll.
Dimensions: 350 x 580 x 210 mm
Article No. WP1401
Kätepaberidosaator sensoriga Wagner Ewar 1+1 roll pattareiga R/V teras satiin
ELECTRONIC TOUCH-FREE PAPER ROLL DISPENSER WITH RESERVE ROLL BATTERY POWERED WP 1401
350 x 580 x 210 mm
1 paper roll + 1 reserve roll
Choose product variant
- Sensor paper roll dispenser with cabinet for reserve roll, battery-powered, in robust, germ-reducing and easy-care stainless steel (AISI 304).
- All-stainless steel housing; all corners fully welded, visible surfaces satin finished and brushed with tapered glossy surface at the bottom.
Further available surfaces: see below. - With touch-free operated, capacitive sensor technology, sensor distance approx. 3.5 cm.
Paper length and idle time adjustable.
Battery-powered with four standard 1.5 V Mono/LR20/12 A batteries. - Designed for one paper roll and one reserve roll with dimensions: Width 215 mm, outer diameter max. 180 mm, inner diameter 50 mm.
- Inspection slot to indicate fill level, residual roll function allows a reserve roll to be inserted before residual roll is completely used up.
- Accessible for refilling through lockable door.
- Keyed alike cylinder lock in corrosion-resistant zinc die-casting.
- Wear parts can be replaced as modules.
- Mounting: With four screws through key holes in the back wall.
- Delivery includes fixing material and first fill with one paper roll.
- Weight (in kg): 12,4
AVAILABLE SURFACES | ORDER NUMBERS |
---|---|
satin finished (standard) | 733260 |
highly polished | 732260 |
(coloured) plastic powder - coating | 728260 |
Sensor paper roll dispenser with cabinet for reserve roll, battery-powered, in stainless steel (AISI 304) for surface mounting. All-stainless steel housing; all corners fully welded, visible surfaces satin finished and brushed with tapered glossy surface at the bottom. With touch-free operated, capacitive sensor technology. Paper length and idle time adjustable. Battery-powered with four standard 1.5 V Mono/LR20/12 A batteries. Designed for one paper roll and one reserve roll with dimensions: Width 215 mm, outer diameter max. 180 mm, inner diameter 50 mm. Inspection slot to indicate fill level. Accessible for refilling through lockable door. Residual roll function allows a reserve roll to be inserted before residual roll is completely used up. Keyed alike cylinder lock in corrosion-resistant zinc die-casting. Delivery includes fixing material and first fill with one paper roll.
Dimensions: 350 x 580 x 210 mm
Article No. WP1401
Kätepaberidosaator sensoriga Wagner Ewar 1+1 roll trafoga R/V teras poleeritud
ELECTRONIC TOUCH-FREE PAPER ROLL DISPENSER TRANSFORMER POWERED WP 1400
350 x 580 x 210 mm
1 paper roll + 1 reserve roll
Choose product variant
- Sensor paper roll dispenser with cabinet for reserve roll, mains-operated, in robust, germ-reducing and easy-care stainless steel (AISI 304).
- All-stainless steel housing; all corners fully welded, visible surfaces satin finished and brushed with tapered glossy surface at the bottom.
Further available surfaces: see below. - With touch-free operated, capacitive sensor technology, sensor distance approx. 3.5 cm. Paper length and idle time adjustable.
Mains-operated 230 V / 50 Hz; power rating 7 Watt; mains cable on site. TÜV/GS-tested and certified. - Designed for one paper roll and one reserve roll with dimensions: Width 215 mm, outer diameter max. 180 mm, inner diameter 50 mm.
- Inspection slot to indicate fill level, residual roll function allows a reserve roll to be inserted before residual roll is completely used up.
- Accessible for refilling through lockable door.
- Keyed alike cylinder lock in corrosion-resistant zinc die-casting.
- Wear parts can be replaced as modules.
- Mounting: With four screws through key holes in the back wall.
- Delivery includes fixing material and first fill with one paper roll.
- Weight (in kg): 12,4
AVAILABLE SURFACES | ORDER NUMBERS |
---|---|
satin finished (standard) | 733250 |
highly polished | 732250 |
(coloured) plastic powder - coating | 728250 |
Sensor paper roll dispenser with cabinet for reserve roll, mains-operated, in stainless steel (AISI 304) for surface mounting. All-stainless steel housing; all corners fully welded, visible surfaces satin finished and brushed with tapered glossy surface at the bottom. With touch-free operated, capacitive sensor technology. Paper length and idle time adjustable. Mains-operated 230 V / 50 Hz; power rating 7 Watt; mains cable on site. TÜV/GS-tested and certified. Designed for one paper roll and one reserve roll with dimensions: Width 215 mm, outer diameter max. 180 mm, inner diameter 50 mm. Inspection slot to indicate fill level. Accessible for refilling through lockable door. Residual roll function allows a reserve roll to be inserted before residual roll is completely used up. Keyed alike cylinder lock in corrosion-resistant zinc die-casting. Delivery includes fixing material and first fill with one paper roll.
Dimensions: 350 x 580 x 210 mm
Article No. WP1400
Kätepaberidosaator sensoriga Wagner Ewar 1+1 roll trafoga R/V teras satiin
ELECTRONIC TOUCH-FREE PAPER ROLL DISPENSER TRANSFORMER POWERED WP 1400
350 x 580 x 210 mm
1 paper roll + 1 reserve roll
Choose product variant
- Sensor paper roll dispenser with cabinet for reserve roll, mains-operated, in robust, germ-reducing and easy-care stainless steel (AISI 304).
- All-stainless steel housing; all corners fully welded, visible surfaces satin finished and brushed with tapered glossy surface at the bottom.
Further available surfaces: see below. - With touch-free operated, capacitive sensor technology, sensor distance approx. 3.5 cm. Paper length and idle time adjustable.
Mains-operated 230 V / 50 Hz; power rating 7 Watt; mains cable on site. TÜV/GS-tested and certified. - Designed for one paper roll and one reserve roll with dimensions: Width 215 mm, outer diameter max. 180 mm, inner diameter 50 mm.
- Inspection slot to indicate fill level, residual roll function allows a reserve roll to be inserted before residual roll is completely used up.
- Accessible for refilling through lockable door.
- Keyed alike cylinder lock in corrosion-resistant zinc die-casting.
- Wear parts can be replaced as modules.
- Mounting: With four screws through key holes in the back wall.
- Delivery includes fixing material and first fill with one paper roll.
- Weight (in kg): 12,4
AVAILABLE SURFACES | ORDER NUMBERS |
---|---|
satin finished (standard) | 733250 |
highly polished | 732250 |
(coloured) plastic powder - coating | 728250 |
Sensor paper roll dispenser with cabinet for reserve roll, mains-operated, in stainless steel (AISI 304) for surface mounting. All-stainless steel housing; all corners fully welded, visible surfaces satin finished and brushed with tapered glossy surface at the bottom. With touch-free operated, capacitive sensor technology. Paper length and idle time adjustable. Mains-operated 230 V / 50 Hz; power rating 7 Watt; mains cable on site. TÜV/GS-tested and certified. Designed for one paper roll and one reserve roll with dimensions: Width 215 mm, outer diameter max. 180 mm, inner diameter 50 mm. Inspection slot to indicate fill level. Accessible for refilling through lockable door. Residual roll function allows a reserve roll to be inserted before residual roll is completely used up. Keyed alike cylinder lock in corrosion-resistant zinc die-casting. Delivery includes fixing material and first fill with one paper roll.
Dimensions: 350 x 580 x 210 mm
Article No. WP1400
Kätepaberidosaator uputatud sensoriga Wagner Ewar 1 roll pattareiga R/V teras satiin
ELECTRONIC TOUCH-FREE PAPER ROLL DISPENSER BATTERY POWERED WP 1311
350 x 448 x 210 mm
1 paper roll
Choose product variant
- Sensor paper roll dispenser, battery-powered, in robust, germ-reducing and easy-care stainless steel (AISI 304).
- All-stainless steel housing; all corners fully welded, visible surfaces satin finished and brushed with tapered glossy surface at the bottom.
Further available surfaces: see below. - With touch-free operated, capacitive sensor technology, sensor distance approx. 3.5 cm. Paper length and idle time adjustable.
Battery-powered with four standard 1.5 V Mono/LR20/12 A batteries. - Designed for one paper roll with dimensions: Width 215 mm, outer diameter max. 180 mm, inner diameter 50 mm.
- Inspection slot to indicate fill level, residual roll function allows a reserve roll to be inserted before residual roll is completely used up.
- Accessible for refilling through lockable door.
- Keyed alike cylinder lock in corrosion-resistant zinc die-casting.
- Wear parts and front panels can be replaced as modules.
- Installation dimensions: 352 x 450 x 180 mm
- Mounting: With four screws in wall opening through fixing holes in the side walls.
- Delivery includes fixing material and first fill with one paper roll.
- Weight (in kg): 10,3
AVAILABLE SURFACES | ORDER NUMBERS |
---|---|
satin finished (standard) | 733240 |
highly polished | 731240 |
(coloured) plastic powder - coating | 728240 |
Sensor paper roll dispenser, battery-powered, in stainless steel (AISI 304) for flush mounting. All-stainless steel housing; all corners fully welded, visible surfaces satin finished and brushed with tapered glossy surface at the bottom. With touch-free operated, capacitive sensor technology. Paper length and idle time adjustable. Battery-powered with four standard 1.5 V Mono/LR20/12 A batteries. Designed for one paper roll with dimensions: Width 215 mm, outer diameter max. 180 mm, inner diameter 50 mm. Inspection slot to indicate fill level. Accessible for refilling through lockable door. Residual roll function allows a reserve roll to be inserted before residual roll is completely used up. Keyed alike cylinder lock in corrosion-resistant zinc die-casting. Delivery includes fixing material and first fill with one paper roll.
Dimensions: 350 x 448 x 210 mm
Article No. WP1311
Kätepaberidosaator uputatud sensoriga Wagner Ewar 1 roll pattareiga R/V teras satiin
ELECTRONIC TOUCH-FREE PAPER ROLL DISPENSER BATTERY POWERED WP 1311
350 x 448 x 210 mm
1 paper roll
Choose product variant
- Sensor paper roll dispenser, battery-powered, in robust, germ-reducing and easy-care stainless steel (AISI 304).
- All-stainless steel housing; all corners fully welded, visible surfaces satin finished and brushed with tapered glossy surface at the bottom.
Further available surfaces: see below. - With touch-free operated, capacitive sensor technology, sensor distance approx. 3.5 cm. Paper length and idle time adjustable.
Battery-powered with four standard 1.5 V Mono/LR20/12 A batteries. - Designed for one paper roll with dimensions: Width 215 mm, outer diameter max. 180 mm, inner diameter 50 mm.
- Inspection slot to indicate fill level, residual roll function allows a reserve roll to be inserted before residual roll is completely used up.
- Accessible for refilling through lockable door.
- Keyed alike cylinder lock in corrosion-resistant zinc die-casting.
- Wear parts and front panels can be replaced as modules.
- Installation dimensions: 352 x 450 x 180 mm
- Mounting: With four screws in wall opening through fixing holes in the side walls.
- Delivery includes fixing material and first fill with one paper roll.
- Weight (in kg): 10,3
AVAILABLE SURFACES | ORDER NUMBERS |
---|---|
satin finished (standard) | 733240 |
highly polished | 731240 |
(coloured) plastic powder - coating | 728240 |
Sensor paper roll dispenser, battery-powered, in stainless steel (AISI 304) for flush mounting. All-stainless steel housing; all corners fully welded, visible surfaces satin finished and brushed with tapered glossy surface at the bottom. With touch-free operated, capacitive sensor technology. Paper length and idle time adjustable. Battery-powered with four standard 1.5 V Mono/LR20/12 A batteries. Designed for one paper roll with dimensions: Width 215 mm, outer diameter max. 180 mm, inner diameter 50 mm. Inspection slot to indicate fill level. Accessible for refilling through lockable door. Residual roll function allows a reserve roll to be inserted before residual roll is completely used up. Keyed alike cylinder lock in corrosion-resistant zinc die-casting. Delivery includes fixing material and first fill with one paper roll.
Dimensions: 350 x 448 x 210 mm
Article No. WP1311
Kätepaberidosaator uputatud sensoriga Wagner Ewar 1 roll trafoga R/V teras poleeritud
ELECTRONIC TOUCH-FREE PAPER ROLL DISPENSER TRANSFORMER POWERED WP 1310
350 x 448 x 210 mm
1 paper roll
Choose product variant
- Sensor paper roll dispenser, mains-operated, in robust, germ-reducing and easy-care stainless steel (AISI 304).
- All-stainless steel housing; all corners fully welded, visible surfaces satin finished and brushed with tapered glossy surface at the bottom.
Further available surfaces: see below. - With touch-free operated, capacitive sensor technology, sensor distance approx. 3.5 cm. Paper length and idle time adjustable.
Mains-operated 230 V / 50 Hz; power rating 7 Watt; mains cable on site. TÜV/GS-tested and certified. - Designed for one paper roll with dimensions: Width 215 mm, outer diameter max. 180 mm, inner diameter 50 mm.
- Inspection slot to indicate fill level, residual roll function allows a reserve roll to be inserted before residual roll is completely used up.
- Accessible for refilling through lockable door.
- Keyed alike cylinder lock in corrosion-resistant zinc die-casting.
- Wear parts and front panels can be replaced as modules.
- Installation dimensions: 352 x 450 x 180 mm
- Mounting: With four screws in wall opening through fixing holes in the side walls.
- Delivery includes fixing material and first fill with one paper roll.
- Weight (in kg): 10,3
AVAILABLE SURFACES | ORDER NUMBERS |
---|---|
satin finished (standard) | 733230 |
highly polished | 732230 |
(coloured) plastic powder - coating | 729230 |
Sensor paper roll dispenser, mains-operated, in stainless steel (AISI 304) for flush mounting. All-stainless steel housing; all corners fully welded, visible surfaces satin finished and brushed with tapered glossy surface at the bottom. With touch-free operated, capacitive sensor technology. Paper length and idle time adjustable. Mains-operated 230 V / 50 Hz; power rating 7 Watt; mains cable on site. TÜV/GS-tested and certified. Designed for one paper roll with dimensions: Width 215 mm, outer diameter max. 180 mm, inner diameter 50 mm. Inspection slot to indicate fill level. Accessible for refilling through lockable door. Residual roll function allows a reserve roll to be inserted before residual roll is completely used up. Keyed alike cylinder lock in corrosion-resistant zinc die-casting. Delivery includes fixing material and first fill with one paper roll.
Dimensions: 350 x 448 x 210 mm
Article No. WP1310
Kätepaberidosaator uputatud sensoriga Wagner Ewar 1 roll trafoga R/V teras satiin
ELECTRONIC TOUCH-FREE PAPER ROLL DISPENSER TRANSFORMER POWERED WP 1310
350 x 448 x 210 mm
1 paper roll
Choose product variant
- Sensor paper roll dispenser, mains-operated, in robust, germ-reducing and easy-care stainless steel (AISI 304).
- All-stainless steel housing; all corners fully welded, visible surfaces satin finished and brushed with tapered glossy surface at the bottom.
Further available surfaces: see below. - With touch-free operated, capacitive sensor technology, sensor distance approx. 3.5 cm. Paper length and idle time adjustable.
Mains-operated 230 V / 50 Hz; power rating 7 Watt; mains cable on site. TÜV/GS-tested and certified. - Designed for one paper roll with dimensions: Width 215 mm, outer diameter max. 180 mm, inner diameter 50 mm.
- Inspection slot to indicate fill level, residual roll function allows a reserve roll to be inserted before residual roll is completely used up.
- Accessible for refilling through lockable door.
- Keyed alike cylinder lock in corrosion-resistant zinc die-casting.
- Wear parts and front panels can be replaced as modules.
- Installation dimensions: 352 x 450 x 180 mm
- Mounting: With four screws in wall opening through fixing holes in the side walls.
- Delivery includes fixing material and first fill with one paper roll.
- Weight (in kg): 10,3
AVAILABLE SURFACES | ORDER NUMBERS |
---|---|
satin finished (standard) | 733230 |
highly polished | 732230 |
(coloured) plastic powder - coating | 729230 |
Sensor paper roll dispenser, mains-operated, in stainless steel (AISI 304) for flush mounting. All-stainless steel housing; all corners fully welded, visible surfaces satin finished and brushed with tapered glossy surface at the bottom. With touch-free operated, capacitive sensor technology. Paper length and idle time adjustable. Mains-operated 230 V / 50 Hz; power rating 7 Watt; mains cable on site. TÜV/GS-tested and certified. Designed for one paper roll with dimensions: Width 215 mm, outer diameter max. 180 mm, inner diameter 50 mm. Inspection slot to indicate fill level. Accessible for refilling through lockable door. Residual roll function allows a reserve roll to be inserted before residual roll is completely used up. Keyed alike cylinder lock in corrosion-resistant zinc die-casting. Delivery includes fixing material and first fill with one paper roll.
Dimensions: 350 x 448 x 210 mm
Article No. WP1310
Kätepaberidosaator uputatud sensoriga Wagner Ewar 1+1 roll pattareiga R/V teras poleeritud
ELECTRONIC TOUCH-FREE PAPER ROLL DISPENSER BATTERY POWERED WP 1411
350 x 580 x 210 mm
1 paper roll + 1 reserve roll
Choose product variant
- Sensor paper roll dispenser with cabinet for reserve roll, battery-powered, in robust, germ-reducing and easy-care stainless steel (AISI 304).
- All-stainless steel housing; all corners fully welded, visible surfaces satin finished and brushed with tapered glossy surface at the bottom.
Further available surfaces: see below. - With touch-free operated, capacitive sensor technology, sensor distance approx. 3.5 cm.
Paper length and idle time adjustable.
Battery-powered with four standard 1.5 V Mono/LR20/12 A batteries. - Designed for one paper roll and one reserve roll with dimensions: Width 215 mm, outer diameter max. 180 mm, inner diameter 50 mm.
- Inspection slot to indicate fill level, residual roll function allows a reserve roll to be inserted before residual roll is completely used up.
- Accessible for refilling through lockable door.
- Keyed alike cylinder lock in corrosion-resistant zinc die-casting.
- Wear parts and front panels can be replaced as modules.
- Installation dimensions: 352 x 582 x 180 mm
- Mounting: With four screws in wall opening through fixing holes in the side walls.
- Delivery includes fixing material and first fill with one paper roll.
- Weight (in kg): 12,4
AVAILABLE SURFACES | ORDER NUMBERS |
---|---|
satin finished (standard) | 733280 |
highly polished | 731280 |
(coloured) plastic powder - coating | 728280 |
Sensor paper roll dispenser with cabinet for reserve roll, battery-powered, in stainless steel (AISI 304) for flush mounting. All-stainless steel housing; all corners fully welded, visible surfaces satin finished and brushed with tapered glossy surface at the bottom. With touch-free operated, capacitive sensor technology. Paper length and idle time adjustable. Battery-powered with four standard 1.5 V Mono/LR20/12 A batteries. Designed for one paper roll and one reserve roll with dimensions: Width 215 mm, outer diameter max. 180 mm, inner diameter 50 mm. Inspection slot to indicate fill level. Accessible for refilling through lockable door. Residual roll function allows a reserve roll to be inserted before residual roll is completely used up. Keyed alike cylinder lock in corrosion-resistant zinc die-casting. Delivery includes fixing material and first fill with one paper roll.
Dimensions: 350 x 580 x 210 mm
Article No. WP1411
ELECTRONIC TOUCH-FREE PAPER ROLL DISPENSER BATTERY POWERED WP 1411
350 x 580 x 210 mm
1 paper roll + 1 reserve roll
Choose product variant
- Sensor paper roll dispenser with cabinet for reserve roll, battery-powered, in robust, germ-reducing and easy-care stainless steel (AISI 304).
- All-stainless steel housing; all corners fully welded, visible surfaces satin finished and brushed with tapered glossy surface at the bottom.
Further available surfaces: see below. - With touch-free operated, capacitive sensor technology, sensor distance approx. 3.5 cm.
Paper length and idle time adjustable.
Battery-powered with four standard 1.5 V Mono/LR20/12 A batteries. - Designed for one paper roll and one reserve roll with dimensions: Width 215 mm, outer diameter max. 180 mm, inner diameter 50 mm.
- Inspection slot to indicate fill level, residual roll function allows a reserve roll to be inserted before residual roll is completely used up.
- Accessible for refilling through lockable door.
- Keyed alike cylinder lock in corrosion-resistant zinc die-casting.
- Wear parts and front panels can be replaced as modules.
- Installation dimensions: 352 x 582 x 180 mm
- Mounting: With four screws in wall opening through fixing holes in the side walls.
- Delivery includes fixing material and first fill with one paper roll.
- Weight (in kg): 12,4
AVAILABLE SURFACES | ORDER NUMBERS |
---|---|
satin finished (standard) | 733280 |
highly polished | 731280 |
(coloured) plastic powder - coating | 728280 |
Sensor paper roll dispenser with cabinet for reserve roll, battery-powered, in stainless steel (AISI 304) for flush mounting. All-stainless steel housing; all corners fully welded, visible surfaces satin finished and brushed with tapered glossy surface at the bottom. With touch-free operated, capacitive sensor technology. Paper length and idle time adjustable. Battery-powered with four standard 1.5 V Mono/LR20/12 A batteries. Designed for one paper roll and one reserve roll with dimensions: Width 215 mm, outer diameter max. 180 mm, inner diameter 50 mm. Inspection slot to indicate fill level. Accessible for refilling through lockable door. Residual roll function allows a reserve roll to be inserted before residual roll is completely used up. Keyed alike cylinder lock in corrosion-resistant zinc die-casting. Delivery includes fixing material and first fill with one paper roll.
Dimensions: 350 x 580 x 210 mm
Article No. WP1411
Kätepaberidosaator uputatud sensoriga Wagner Ewar 1+1 roll trafoga R/V teras poleeritud
ELECTRONIC TOUCH-FREE PAPER ROLL DISPENSER TRANSFORMER POWERED WP 1410
350 x 580 x 210 mm
1 paper roll + 1 reserve roll
Choose product variant
- Sensor paper roll dispenser with cabinet for reserve roll, mains-operated, in robust, germ-reducing and easy-care stainless steel (AISI 304).
- All-stainless steel housing; all corners fully welded, visible surfaces satin finished and brushed with tapered glossy surface at the bottom.
Further available surfaces: see below. - With touch-free operated, capacitive sensor technology, sensor distance approx. 3.5 cm. Paper length and idle time adjustable.
Mains-operated 230 V / 50 Hz; power rating 7 Watt; mains cable on site.
TÜV/GS-tested and certified. - Designed for one paper roll and one reserve roll with dimensions: Width 215 mm, outer diameter max. 180 mm, inner diameter 50 mm.
- Inspection slot to indicate fill level, residual roll function allows a reserve roll to be inserted before residual roll is completely used up.
- Accessible for refilling through lockable door.
- Keyed alike cylinder lock in corrosion-resistant zinc die-casting.
- Wear parts and front panels can be replaced as modules.
- Installation dimensions: 352 x 582 x 180 mm
- Mounting: With four screws in wall opening through fixing holes in the side walls.
- Delivery includes fixing material and first fill with one paper roll.
- Weight (in kg): 12,4
AVAILABLE SURFACES | ORDER NUMBERS |
---|---|
satin finished (standard) | 733270 |
highly polished | 732270 |
(coloured) plastic powder - coating | 728270 |
Sensor paper roll dispenser with cabinet for reserve roll, mains-operated, in stainless steel (AISI 304) for flush mounting. All-stainless steel housing; all corners fully welded, visible surfaces satin finished and brushed with tapered glossy surface at the bottom. With touch-free operated, capacitive sensor technology. Paper length and idle time adjustable. Mains-operated 230 V / 50 Hz; power rating 7 Watt; mains cable on site. TÜV/GS-tested and certified. Designed for one paper roll and one reserve roll with dimensions: Width 215 mm, outer diameter max. 180 mm, inner diameter 50 mm. Inspection slot to indicate fill level. Accessible for refilling through lockable door. Residual roll function allows a reserve roll to be inserted before residual roll is completely used up. Keyed alike cylinder lock in corrosion-resistant zinc die-casting. Delivery includes fixing material and first fill with one paper roll.
Dimensions: 350 x 580 x 210 mm
Article No. WP1410
Kätepaberidosaator uputatud sensoriga Wagner Ewar 1+1 roll trafoga R/V teras satiin
ELECTRONIC TOUCH-FREE PAPER ROLL DISPENSER TRANSFORMER POWERED WP 1410
350 x 580 x 210 mm
1 paper roll + 1 reserve roll
Choose product variant
- Sensor paper roll dispenser with cabinet for reserve roll, mains-operated, in robust, germ-reducing and easy-care stainless steel (AISI 304).
- All-stainless steel housing; all corners fully welded, visible surfaces satin finished and brushed with tapered glossy surface at the bottom.
Further available surfaces: see below. - With touch-free operated, capacitive sensor technology, sensor distance approx. 3.5 cm. Paper length and idle time adjustable.
Mains-operated 230 V / 50 Hz; power rating 7 Watt; mains cable on site.
TÜV/GS-tested and certified. - Designed for one paper roll and one reserve roll with dimensions: Width 215 mm, outer diameter max. 180 mm, inner diameter 50 mm.
- Inspection slot to indicate fill level, residual roll function allows a reserve roll to be inserted before residual roll is completely used up.
- Accessible for refilling through lockable door.
- Keyed alike cylinder lock in corrosion-resistant zinc die-casting.
- Wear parts and front panels can be replaced as modules.
- Installation dimensions: 352 x 582 x 180 mm
- Mounting: With four screws in wall opening through fixing holes in the side walls.
- Delivery includes fixing material and first fill with one paper roll.
- Weight (in kg): 12,4
AVAILABLE SURFACES | ORDER NUMBERS |
---|---|
satin finished (standard) | 733270 |
highly polished | 732270 |
(coloured) plastic powder - coating | 728270 |
Sensor paper roll dispenser with cabinet for reserve roll, mains-operated, in stainless steel (AISI 304) for flush mounting. All-stainless steel housing; all corners fully welded, visible surfaces satin finished and brushed with tapered glossy surface at the bottom. With touch-free operated, capacitive sensor technology. Paper length and idle time adjustable. Mains-operated 230 V / 50 Hz; power rating 7 Watt; mains cable on site. TÜV/GS-tested and certified. Designed for one paper roll and one reserve roll with dimensions: Width 215 mm, outer diameter max. 180 mm, inner diameter 50 mm. Inspection slot to indicate fill level. Accessible for refilling through lockable door. Residual roll function allows a reserve roll to be inserted before residual roll is completely used up. Keyed alike cylinder lock in corrosion-resistant zinc die-casting. Delivery includes fixing material and first fill with one paper roll.
Dimensions: 350 x 580 x 210 mm
Article No. WP1410
Touchless paper towel dispenser, for paper rolls
HTU 1 Midnight
Stainless steel powder coated matte black (RAL 9005), lockable, with fill level window, the resi- dual roll function automatically loads the next roll and helps to eliminate unnecessary waste
Paper feed:
HTU 1 P Midnight
Touchless paper feed: Paper stays within the dispenser until a hand is detected underneath the outlet - delay and paper length adjustable
Paper Type
Paper rolls:
max. roll width 200 mm, max. roll diameter 190 mm, min. inside diameter for outlet type 38 mm
Power supply: With 4 D-batteries
Dimensions:W 279 x H 407 x D 211 mm
Stainless steel, powder coated matte black |
Art. No.1420972 |
WP 1310/1311 COVERING FRAME 768656
for 350 x 448 mm
WP 1410/1411 COVERING FRAME 768657
for 350 x 580 mm