Kontaktivaba santehnika sensoriga, radariga
Kroom FMM-nr:1641-0000
- Temperatuuriseade nupuga, akutoitel (aku kaasas)
- Vandalismikindel, kest üleni metallist
- ECO funktsioon (vett ja energiat säästev õhusti 5 l/min)
- Aegreleega loputuse lõpetus üleujutamise vältimiseks
- 30-sekundiline loputusaeg (anduriga)
- Võimalik välja lülitada 60 sekundiks (näiteks puhastamiseks)
- Madal voolutarve, pikk eluiga
- Võimalik kuuma veega läbi loputada, et desinfitseerida legionella vastu
- IP-klassi andur, IP67
- Keskkonnasõbralik materjal, pliivaba, niklivaba
Paigaldamine: - Anduri automaatne kalibreering
- Pärast seadistamist sobivale temperatuurile, on võimalik nupp asendada ehiskaanega
- Kõiki mudeleid on võimalik kasutada nii 6V aku toitel või 12V vooluadapteriga
- Võrguvoolu kasutamiseks on tarvis paigaldada vooluadapter 1623-0000 ja toide FMM 1619-4000 või teise võimalusena trafo FMM 1619-3000
- Pehmed PEX® voolikud koos integreeritud tagasilöögiklappide ja filtritega (roostevabast terasest)
- Ava läbimõõt Ø 33,5–37 mm
Seaded: - Reguleeritav maksimaalne temperatuur
- Programmeeritav hügieeniloputuse funktsioon
- Seadistatav loputusaeg
Keskselt juhitav mudel: - Komplektis kaabel, millega on võimalik juhtida hügieeniloputust
- Loputus toimub, kui sissevool on suletud
RECEPTACLE 923136
for PP102e-7S
140 x 20 x 195 mm
Order numbers:
satin finished: 923136
RAL-powder coated: 923136-RAL
85,40 €
Automatne kummikute pesur düüsiga, 12V, 50Hz
automatic washing system for wellingtons with jets - 12V, 50Hz
AMO 01 is a stainless steel automatic washing system for wellingtons with sensor-controlled water nozzles. When stepping into the washing chamber of the system (scanning zone) water starts to flow from the nozzles automatically and wellingtons are cleaned of dirt. Water stops flowing with a certain time delay after the foot has been removed from the scanning zone.
AMO 01 is designed for a single pipe inlet of pre-mixed water from the circulation or water pre-mixed by means of a thermostatic valve.
The AMO 01 automatic washing system is intended mainly for operations with slight shoe contamination where quick washing at maximum water savings is guaranteed.
Package contents
- body of the washing machine
- photocell head
- nozzles – 8 pcs
- electromagnetic valves 2 pcs
- corner valves with filter
- connecting hoses
| Radius of sensor | 0 – 0,4 m |
| Water inlet | G 1/2“ |
| Water pressure | 0,3 – 1,0 MPa |
| Outlet | d = 32 mm |
| Inner dimensions of the trough | 250 x 400 x 280 mm |
| Electricity protection | IP 55 |
| Power supply | 12 V, 50 Hz |
| Power requirement | 10 VA |
| Source of power supply | ZAC 1/20 (max. 2 x AMO 01) |
| ZAC 1/50 (max. 5 x AMO 01) | |
| Weight | 18 kg |
- Set up water inlet as per picture
- Set up outlet d = 32 mm
- Set up cable for power supply – 12 V, 50 Hz from source of power supply ZAC
automatic washing system for soles with rotary brushes - 230V, 50Hz
RMP 02 is a stainless steel sensor-controlled washing system with rotary brushes for wellingtons. A built-in photocell sensor reacts to the user holding the handrail. The electromagnetic valve switches on, opens the water inlet, the brushes start to rotate and the circular jet injection of the disinfecting lotion is carried out. After placing the foot with the wellington on the grid in between the rotary brushes, the sole is cleaned by means of the horizontal brush. There is a CENTRAL/STOP button on the handrail for emergency switch-off.
The washing system is intended for free standing installation on the floor. Imperfections in the floor are balanced out by four adjustable hobs. The construction of the system allows the outlet to be placed above floor level. Large pieces of dirt are collected by a sieve, which can be easily cleaned. The sieve and brush can be taken out without using a tool.
The RMP 02 washing system, with its easy maintenance, is mainly intended for operations where quick removal of mechanical dirt from wellingtons is required.
The canister with disinfecting solution is not part of the delivery.
Package contents
- body of the washing machine
- removable grid
- electronics with photocell
- rotary brush
- hand brush
- jerican holder
- priming hose
- adjustable supporting legs
- central stop button
| Radius of sensor | 0,5 m |
| Water inlet | G 1/2“ |
| Water pressure | 0,1 – 1,0 MPa |
| Outlet | G 6/4” |
| Electricity protection | IP 55 |
| Power supply | 230 V, 50 Hz |
| Power requirement | 370 W |
| Water temperature | max. 42°C |
| Weight | 41 kg |
- Set up water inlet as per picture
- Set up outlet G 6/4” via effluvial cover
- Set up cable for power supply – 230 V, 50 Hz
RMO 02
automatic washing system for wellingtons
RMO 02 is a stainless steel sensor-controlled washing system with rotary brushes for wellingtons. A built-in photocell sensor reacts to the user holding the handrail. The electromagnetic valve switches on, opens the water inlet, the brushes start to rotate and the circular jet injection of the disinfecting lotion is carried out. After placing the foot with the wellington on the grid in between the rotary brushes, the sole is cleaned by means of the horizontal brush and the leg portion is cleaned by means of two vertical brushes. The system is automatically switched off when the user releases the handrail. There is a CENTRAL/STOP button on the handrail for emergency switch-off.
The washing system is intended for free standing installation on the floor. Imperfections of the floor are balanced out by four adjustable hobs. The construction of the system allows the outlet to be placed above the floor level.
The RMO 02 washing system, with its easy maintenance, is mainly intended for operations where quick removal of mechanical dirt from wellingtons is required.
The canister with disinfecting solution is not part of the delivery.
Package contents
- body of the washing machine
- removable grid
- electronics with photocell
- three rotary brushes
- jerican holder
- priming hose
- adjustable supporting legs
- central stop button
| Radius of sensor | 0,7 m |
| Water inlet | G 1/2“ |
| Water pressure | 0,1 – 1,0 MPa |
| Outlet | G 6/4” |
| Electricity protection | IP 55 |
| Power supply | 230 V, 50 Hz |
| Power requirement | 370 W |
| Water temperature | max. 42°C |
| Weight | 95 kg |
- Set up water inlet as per picture
- Set up outlet G 6/4” via effluvial cover
- Set up cable for power supply – 230 V, 50 Hz
Dealabie dosaator seebi/hydroalcoholic gel 1 L kontaktivaba sensoriga R/V teras must
Wall-mounted electronic liquid soap dispenser, 1 litre
Ref. 512066BK
Liquid soap or hydroalcoholic gel dispenser.
Vandal-resistant model with lock and standard DELABIE key.
No manual contact: hands are automatically detected by infrared cell
(detection distance can be adjusted).
Bacteriostatic 304 stainless steel cover.
One-piece hinged cover for easy maintenance and better hygiene.
No waste pump dispenser: dispenses 0.8ml
(can be adjusted up to 7 doses per activation).
Option of operation in anti-clogging mode.
Automatic soap dispenser: 6 AA -1.5V (DC9V) batteries supplied, integrated in the soap dispenser body.
Low battery indicator light.
Tank with large opening: easy to refill soap from large containers.
Window allows soap level to be checked.
304 stainless steel with matte black finish.
Stainless steel thickness: 1mm.
Capacity: 1 litre.
Dimensions: 90 x 105 x 256mm.
For vegetable-based liquid soap with a maximum viscosity of 3,000 mPa.s.
Compatible with hydroalcoholic gel.
CE marked.
TECHNICAL CHARACTERISTICS
Wall-mounted electronic liquid soap dispenser, 1 litre
Ref. 512066BK| Supply | 6 x AA batteries |
| Technology | Infrared sensor |
| Height | 256mm |
| Depth | 90mm |
| Width | 105mm |
| Volume | 1 litre tank |
| Thickness | 1mm |
| Finish | Matte black 304 stainless steel |
Wall-mounted electronic liquid soap dispenser, 1 litre
Ref. 512066P
Electronic liquid soap dispenser, wall-mounted.
Vandal-resistant model with lock and standard DELABIE key.
No manual contact: hands are automatically detected by infrared cell (detection distancecan be adjusted).
Bacteriostatic 304 stainless steel cover.
One-piece hinged cover for easy maintenanceand better hygiene.
No waste pump dispenser: dispenses 0.8ml(can be adjusted up to 7 doses per activation).
Option of operation in anti-clogging mode.
Power supply: 6 AA -1.5V (DC9V) batteries supplied integrated in the soap dispenser body.
Low battery indicator light.
Tank with large opening: eases transfer of soapfrom large containers.
Window allows soap level to be checked.
Bright polished 304 stainless steel.
Stainless steel thickness: 1mm.
Capacity: 1 litre.
Dimensions : 90 x 105 x 256mm.
For vegetable-based liquid soap with a maximum viscosity of 3,000 mPa.s.
Compatible with hydroalcoholic gel.
CE marked.
Wall-mounted electronic liquid soap dispenser, 1 litre
Ref. 512066S
Electronic liquid soap dispenser, wall-mounted.
Vandal-resistant model with lock and standard DELABIE key.
No manual contact: hands are automatically detected by infrared cell (detection distancecan be adjusted).
Bacteriostatic 304 stainless steel cover.
One-piece hinged cover for easy maintenanceand better hygiene.
No waste pump dispenser: dispenses 0.8ml(can be adjusted up to 7 doses per activation).
Option of operation in anti-clogging mode.
Power supply: 6 AA -1.5V (DC9V) batteries supplied integrated in the soap dispenser body.
Low battery indicator light.
Tank with large opening: eases transfer of soapfrom large containers.
Window allows soap level to be checked.
Polished satin 304 stainless steel.
Stainless steel thickness: 1mm.
Capacity: 1 litre.
Dimensions : 90 x 105 x 256mm.
For vegetable-based liquid soap with a maximum viscosity of 3,000 mPa.s.
Compatible with hydroalcoholic gel.
CE marked.
Wall-mounted electronic liquid soap dispenser, 1 litre
Ref. 512066W
Electronic liquid soap dispenser, wall-mounted.
Vandal-resistant model with lock and standard DELABIE key.
No manual contact: hands are automatically detected by infrared cell (detection distancecan be adjusted).
Bacteriostatic 304 stainless steel cover.
One-piece hinged cover for easy maintenanceand better hygiene.
No waste pump dispenser: dispenses 0.8ml(can be adjusted up to 7 doses per activation).
Option of operation in anti-clogging mode.
Power supply: 6 AA -1.5V (DC9V) batteries supplied integrated in the soap dispenser body.
Low battery indicator light.
Tank with large opening: eases transfer of soap from large containers.
Window allows soap level to be checked.
White powder-coated 304 stainless steel.
Stainless steel thickness: 1mm.
Capacity: 1 litre.
Dimensions : 90 x 105 x 256mm.
For vegetable-based liquid soap with a maximum viscosity of 3,000 mPa.s.
Compatible with hydroalcoholic gel.
CE marked.
Delabie 512111P antivandaalne elektrooniline vedel- või vahtseebi dosaator, harj. rst
Electronic liquid or foam soap dispenser
Ref. 512111P
Liquid or foam soap dispenser.
Vandal-resistant model for cross wall (TC) up to 110mm.
No manual contact: infrared cell detects hands automatically.
Chrome-plated 304 stainless steel spout.
No waste pump dispenser.
Independent electronic unit for installation beneath the washbasin or in a service duct.
Automatic soap dispenser: mains supply with 230/6V transformer.
For vegetable-based liquid soap with maximum viscosity of 3,000 mPa.s or specific foam soap.
Total spout length: 115mm.
Supplied with 1.20m flexible tube for remote tanks.
TECHNICAL CHARACTERISTICS
Electronic liquid or foam soap dispenser
Ref. 512111P| Supply | Mains supply 230/6V |
| Connector | 1/2" |
| Technology | Infrared detection |
| Height | 115mm (electronic unit) |
| Length | 115mm |
| Spout length | 98mm |
| Finish | Chrome-plated 304 stainless steel |
Delabie 512551P elektrooniline vedel- või vahtseebi dosaator, 0.5L harj. rst
Electronic, liquid or foam soap dispenser, 0.5 litre
Ref. 512551P
Liquid or foam soap or hydroalcoholic gel dispenser.
No manual contact: infrared cell detects hands automatically.
Chrome-plated 304 stainless steel spout.
No waste pump dispenser.
Independent electronic housing and removable tank enable installation beneath the washbasin.
Automatic soap dispenser: mains supply with 230/6V transformer.
For vegetable-based liquid soap with maximum viscosity of 3,000 mPa.s or specific foam soap.
Compatible with hydroalcoholic gel.
Total spout length: 115mm.
Supplied with 0.5 litre tank.
TECHNICAL CHARACTERISTICS
Electronic, liquid or foam soap dispenser, 0.5 litre
Ref. 512551P| Supply | Mains supply 230/6V |
| Technology | Infrared detection |
| Height | 233mm (tank + electronic unit) |
| Length | 115mm |
| Spout length | 98mm |
| Volume | Tank: 0.5 litre |
| Finish | Chrome-plated 304 stainless steel |
Delabie elektrooniline kraan eelsegatud veele 170mm 388035 M3/8" BINOPTIC TAP 230/12V matt must
BLACK BINOPTIC electronic tap
Ref. 388035
Independent IP65 electronic control unit.
230/12V mains supply with transformer.
Flow rate pre-set at 3 lpm at 3 bar, can be adjusted from 1.4 to 6 lpm.
Scale-resistant flow straightener.
Adjustable duty flush (pre-set flush ~60 seconds every 24 hours after last use).
Active, infrared presence detection, sensor at the end of the spout optimises detection.
Chrome-plated brass body.
Matte black chrome finish.
PEX flexible with filter and solenoid valve M3/8".
Fixing reinforced by 2 stainless steel rods.
Anti-blocking security.
Spout with smooth interior and low volume of water (reduces bacterial development).
Drop height: 170mm for semi-recessed washbasins.
Suitable for people with reduced mobility.
TECHNICAL CHARACTERISTICS
BLACK BINOPTIC electronic tap
Ref. 388035| Supply | Main supply 230/12V |
| Connector | M3/8" |
| Technology | Electronic |
| Drop height | 170mm |
| Spout length | 175mm |
| Flow rate | 3 lpm |
| Finish | Matte black chrome |
Delabie elektrooniline kraan eelsegatud veele 170mm 488035 M3/8" BINOPTIC TAP 6V matt must
BLACK BINOPTIC electronic tap
Ref. 488035
Independent IP65 electronic control unit.
123 6V Lithium batteries.
Flow rate pre-set at 3 lpm at 3 bar, can be adjusted from 1.4 - 6 lpm.
Scale-resistant flow straightener.
Adjustable duty flush (pre-set flush 60 seconds every 24 hours after last use).
Active, infrared presence detection, sensor at the end of the spout optimises detection.
Chrome-plated brass body.
Matte black chrome finish.
PEX flexible with filter and solenoid valve M⅜".
Fixing reinforced by 2 stainless steel rods.
Anti-blocking security.
Spout with smooth interior and low water volume (reduces bacterial development).
Drop height: 170mm for semi-recessed washbasins.
Suitable for people with reduced mobility.
TECHNICAL CHARACTERISTICS
BLACK BINOPTIC electronic tap
Ref. 488035| Supply | 6V batteries |
| Connector | M3/8" |
| Technology | Electronic |
| Drop height | 170mm |
| Spout length | 175mm |
| Flow rate | 3 lpm |
| Finish | Matte black chrome |
Delabie elektrooniline kraan eelsegatud veele 250mm 398035 M3/8" BINOPTIC TAP 230/12V matt must
BLACK BINOPTIC electronic tap
Ref. 398035
Independent IP65 electronic control unit.
230/12V mains supply with transformer.
Flow rate pre-set at 3 lpm at 3 bar, can be adjusted from 1.4 - 6 lpm.
Scale-resistant flow straightener.
Adjustable duty flush (pre-set flush 60 seconds every 24 hours after last use).
Active, infrared presence detection, sensor at the end of the spout optimises detection.
Chrome-plated brass body.
Matte black chrome finish.
PEX flexible with filter and solenoid valve M⅜".
Fixing reinforced by 2 stainless steel rods.
Anti-blocking security.
Spout with smooth interior and low water volume (reduces bacterial development).
Drop height 250mm, for countertop washbasins.
Suitable for people with reduced mobility.
TECHNICAL CHARACTERISTICS
BLACK BINOPTIC electronic tap
Ref. 398035| Supply | Mains supply 230/12V |
| Connector | M3/8" |
| Technology | Electronic |
| Drop height | 250mm |
| Spout length | 185mm |
| Flow rate | 3 lpm |
| Finish | Matte black chrome |
Delabie elektrooniline kraan eelsegatud veele 250mm 498035 M3/8" BINOPTIC TAP 6V matt must
BLACK BINOPTIC electronic tap
Ref. 498035
Independent IP65 electronic control unit.
Battery-operated with 123 6V Lithium batteries.
Flow rate pre-set at 3 lpm at 3 bar, can be adjusted from 1.4 - 6 lpm.
Scale-resistant flow straightener.
Adjustable duty flush (pre-set flush 60 seconds every 24 hours after last use).
Active, infrared presence detection, sensor at the end of the spout optimises detection.
Chrome-plated brass body.
Matte black chrome finish.
PEX flexible with filter and solenoid valve M⅜".
Fixing reinforced by 2 stainless steel rods.
Anti-blocking security.
Spout with smooth interior and low water volume (reduces bacterial development).
Drop height 250mm for countertop washbasins.
Suitable for people with reduced mobility.
TECHNICAL CHARACTERISTICS
BLACK BINOPTIC electronic tap
Ref. 498035| Supply | 6V batteries |
| Connector | M3/8" |
| Technology | Electronic |
| Drop height | 250mm |
| Spout length | 185mm |
| Flow rate | 3 lpm |
| Finish | Matte black chrome |
Delabie kontaktivaba eelsegatud/külmavee kraan seinale 379MCHB BINOPTIC TAP 230/12V matt must
BLACK BINOPTIC electronic tap
Ref. 379ENCB
Independent IP65 electronic control unit.
230/12V mains supply with transformer.
Flow rate pre-set at 3 lpm at 3 bar, can be adjusted from 1.4 to 6 lpm.
Scale-resistant flow straightener.
Adjustable duty flush (pre-set flush ~60 seconds every 24 hours after last use).
Active, infrared presence detection, sensor at the end of the spout optimises detection.
Filter and solenoid valve M3/8".
Chrome-plated brass body.
Matte black chrome finish.
Recessed installation.
Anti-blocking safety.
Spout with smooth interior and low volume of water (limits bacterial niches).
Suitable for people with reduced mobility.
TECHNICAL CHARACTERISTICS
BLACK BINOPTIC electronic tap
Ref. 379ENCB| Supply | Mains supply 230/12V |
| Connector | M3/8" |
| Technology | Electronic |
| Spout length | 200mm |
| Flow rate | 3 lpm |
| Finish | Matte black chrome |
Delabie kontaktivaba elektronik segisti 478MCHB M3/8" BINOPTIC MIX 6V matt must
BLACK BINOPTIC MIX electronic mixer
Ref. 478MCHB
Independent IP65 electronic control unit.
123 6V Lithium battery-operated.
Flow rate pre-set at 3 lpm at 3 bar, can be adjusted from 1.4 to 6 lpm.
Scale-resistant flow straightener.
Adjustable duty flush (pre-set flush ~60 seconds. every 24 hours after last use).
Active, infrared presence detection, sensor at the end of the spout optimises detection.
Chrome-plated brass body.
Matte black chrome finish.
PEX flexibles with filters and solenoid valves M3/8".
Fixing reinforced by 2 stainless steel rods.
Anti-blocking safety.
Spout with smooth interior and low volume of water(reduces niches where bacteria can develop).
Side temperature control with standard lever control and adjustable maximum temperature limiter.
Suitable for people with reduced mobility.
TECHNICAL CHARACTERISTICS
BLACK BINOPTIC MIX electronic mixer
Ref. 478MCHB| Supply | 6V batteries |
| Connector | M3/8" |
| Technology | Electronic |
| Drop height | 110mm |
| Spout length | 135mm |
| Flow rate | 3 lpm |
| Finish | Matte black chrome |
BINOPTIC MIX electronic mixer
Ref. 478MCH
Deck-mounted electronic basin mixer:
Independent IP65 electronic control unit.
123 6V Lithium battery-operated.
Flow rate pre-set at 3 lpm at 3 bar, can be adjusted from 1.5 to 6 lpm.
Scale-resistant flow straightener.
Adjustable duty flush (pre-set flush ~60 seconds. every 24hr after last use).
Active, infrared presence detection, sensor at the end of the spout optimises detection.
Chrome-plated brass body.
PEX flexibles with filters and solenoid valves M3/8".
Fixing reinforced by 2 stainless steel rods.
Anti-blocking safety.
Spout with smooth interior and low volume of water(reduces niches where bacteria can develop).
Side temperature control with standard lever control and adjustable maximum temperature limiter.
Suitable for people with reduced mobility.
TECHNICAL FEATURES
BINOPTIC MIX electronic mixer
Ref. 478MCH
| Supply | 6V battery |
|---|---|
| Connector | M3/8" |
| Technology | Electronic |
| Drop height | 110mm |
| Spout length | 135mm |
| Flow rate | 3 lpm |
BINOPTIC MIX electronic mixer
Ref. 478MCHLH
Deck-mounted electronic basin mixer:
Independent IP65 electronic control unit.
123 6V Lithium battery-operated.
Flow rate pre-set at 3 lpm at 3 bar, can be adjusted from 1.5 to 6 lpm.
Scale-resistant flow straightener.
Adjustable duty flush (pre-set flush ~60 seconds every 24hr after last use).
Active, infrared presence detection, sensor at the end of the spout optimises detection.
Chrome-plated brass body.
PEX flexibles with filters and solenoid valves M3/8".
Fixing reinforced by 2 stainless steel rods.
Anti-blocking safety.
Spout with smooth interior and low volume of water (reduces niches where bacteria can develop).
Side temperature control with long lever control and adjustable maximum temperature limiter.
Suitable for people with reduced mobility.
TECHNICAL FEATURES
BINOPTIC MIX electronic mixer
Ref. 478MCHLH
| Supply | 6V battery |
|---|---|
| Connector | M3/8" |
| Technology | Electronic |
| Drop height | 110mm |
| Spout length | 135mm |
| Flow rate | 3 lpm |
BINOPTIC MIX electronic mixer
Ref. 478MCH15
Deck-mounted electronic basin mixer:
Independent IP65 electronic control unit.
123 6V Lithium battery.
Flow rate pre-set at 3 lpm at 3 bar, can be adjusted from 1.5 to 6 lpm.
Scale-resistant flow straightener.
Duty flush (~60 sec. every 24h after last use).
Active, infrared movement detection, sensor at the end of the spout optimises detection.
Chrome-plated solid brass body.
PEX flexibles with filters, solenoid valves and Ø 15mm conical inlets.
Fixing reinforced by 2 stainless steel rods.
Anti-blocking safety.
Spout with a smooth interior and low volume of water (limits bacterial niches).
Side temperature control with adjustable maximum temperature limiter.
TECHNICAL FEATURES
BINOPTIC MIX electronic mixer
Ref. 478MCH15
| Supply | 6V battery |
|---|---|
| Connector | M1/2'' Ø 15mm |
| Technology | Electronic |
| Drop height | 110mm |
| Spout length | 135mm |
| Flow rate | 3 lpm |
