Be-line T-shaped shower grab bar with sliding vertical bar Ref. 511944W
Be-line T-shaped grab bar Ø 35mm for showers with sliding vertical bar.. Use as a shower rail and to support the user in an upright position. Helps and secures entry and movement in the shower. Use as a shower rail by adding a sliding shower head holder and/or soap dish. Upright position can be adjusted during installation: can be moved to the left or the right in order to adapt the space(positioning of shower, depth of shower seat...). Dimensions: 1,130 x 500mm. Aluminium tube thickness 3mm. Solid aluminium fixing points. Rounded profile Ø 35mm with ergonomic flat front face that prevents rotation for an optimal grip. Matte white powder-coated aluminium provides a good visual contrast with the wall. Uniform surface for easy maintenance and hygiene. 38mm gap between the bar and the wall: minimal space prevents the forearm passing between the bar and the wall, reducing the risk of fracture in case of loss of balance. Concealed fixings. Supplied with Ø 8 x 70 mm stainless steel screws for concrete walls. Tested to over 200kg. Maximum recommended user weight: 135kg.
TECHNICAL FEATURES
Be-line T-shaped shower grab bar with sliding vertical bar Ref. 511944W
Tork SmartOne Mini T9 rulltualettpaber, 2-kihiline, 12 × 111,6 m
Tork SmartOne Mini T9 rulltualettpaberi süsteem pakub uuenduslikku lahendust, mis väljutab korraga ühe lehe, aidates vähendada paberikulu kuni 40% võrreldes traditsiooniliste Jumbo rullhoidikutega. See tõhus lahendus tähendab, et ühe rulliga saab teenindada rohkem külastajaid, muutes selle ideaalseks suure koormusega pesuruumidesse, kus on madal kuni keskmine külastajate arv. Valikus on mitmed Tork SmartOne Mini hoidikud, mis tagavad mugavuse ja hügieeni erinevates keskkondades.
Suur valik kvaliteetseid segisteid ja vannitoaaksessuaare parimatelt tootjatelt! Santehnika müük soodsa hinnaga ja kiire tarnega. Vajadusel vormistame ka e-arve!
Wall mounted mobile device holder shall have a type 304 stainless steel front with satin finish. Back plate shall be type 304 stainless steel. Inside cradle and hook shall be 304 stainless steel. Back plate shall mount onto wall with stainless steel, sheet metal screws. Front plate including cradle shall be mounted onto back plate and secured in place with threaded posts. Front hook shall be installed onto threaded posts and secured with set screws for theft resistance. Glued rubber bands at back plate and cradle prevent the laptop or other devices against unintended slide out of the article
Easily installed on toilet partition or wall. Type 304 stainless steel, satin finish. Pull-down shelf returns to upright position when not in use. Supports 100 lbs (45.36 kg) when properly installed. Shelf 14 1⁄2" long, 5 3⁄4" wide (370 x 145mm).