Dušiistmed, Dušitoolid, Invaistmed
Dušiistmed, dušitoolid ja invaistmed on olulised aksessuaarid, mis pakuvad mugavust, turvalisust ja ligipääsetavust vannitoas, eriti neile, kellel on liikumispiirangud või erivajadused. Need aksessuaarid võivad olla kasulikud mitmesugustes olukordades, sealhulgas eakatele, puuetega inimestele, rasedatele või vigastustest taastuvatele isikutele. Mõned erinevad dušiistmete, dušitoolide ja invaistmete tüübid on:
-
Dušiistmed - Dušiistmed on istekohad, mis paigaldatakse dušinurka või dušikabiini. Need võivad olla seinale kinnitatavad, mõeldud paigutamiseks vanni või dušši sisse, või vabalt seisevad. Dušiistmed pakuvad kasutajale istumismugavust duši all olles, vähendavad kukkumisohtu ja võimaldavad pikemat ja turvalisemat duši all käimist.
-
Dušitoolid - Dušitoolid on eraldi istekohad, mida saab kasutada duši all istumiseks. Need on sageli varustatud libisemisvastase pinnaga, reguleeritava kõrgusega ja võivad olla ka kokkuklapitavad, et säästa ruumi. Dušitoolid võimaldavad kasutajatel istuda ja duši all käia, ilma et peaks seisma või seistes tasakaalu hoidma, mis on eriti kasulik eakamatele või liikumispiirangutega inimestele.
-
Invaistmed - Invaistmed on spetsiaalselt loodud inimestele, kellel on erivajadused või puue. Need võivad olla seinale kinnitatavad või vabalt seisevad istekohad, mida kasutatakse duši all istumiseks või dušši sisenemiseks. Invaistmed on sageli tugevad, vastupidavad, reguleeritava kõrgusega ja varustatud turvavööde või käepidemetega, et tagada kasutaja ohutus ja mugavus.
Dušiistmed, dušitoolid ja invaistmed on olulised aksessuaarid, mis võimaldavad inimestel, kellel on liikumispiirangud või erivajadused, nautida mugavat ja turvalist duši all käimist. Need aksessuaarid võivad olla erinevates stiilides ja suurustes, et sobituda erinevate vannitubade interjööridesse ning tagada kasutajatele vajalik mugavus ja turvalisus duši all.
ALU shower stool
Ref. 510418
ALU lift-up shower stool for people with reduced mobility.
Large plastic slats are comfortable and easy to maintain.
Structure made from white aluminium tube Ø 25mm x 2mm.
Dimensions: 400 x 360 x 480mm.
Seat height: 480mm.
Tested to over 200kg. Maximum recommended user weight: 135kg.
Plastic protective feet.
TECHNICAL FEATURES
ALU shower stool
Ref. 510418
| Height | 480mm |
|---|---|
| Depth | 400mm |
| Width | 360mm |
| Finish | White powder-coated aluminium |
DESCRIPTION
Lift-up shower seat, with ALU leg
Ref. 510400
ALU lift-up shower seat with leg, for people with reduced mobility.
Large plastic slats, comfortable and easy to maintain.
Folding leg guided by an articulated arm.
Structure made from white aluminium tube Ø 25mm x 2mm.
Concealed fixings.
Dimensions: 407 x 360 x 480mm.
Folded dimensions: 82 x 545mm.
Seat height: 480mm.
Tested to over 200kg. Maximum recommended user weight: 135kg.
CE marked.
TECHNICAL FEATURES
Lift-up shower seat, with ALU leg
Ref. 510400
| Height | 480mm |
|---|---|
| Depth | 407mm |
| Width | 360mm |
| Finish | White powder-coated aluminium |
Lift-up shower seat with ALU leg- Large model
Ref. 510410
Lift-up ALU shower seat with leg, for people with reduced mobility.
Large model.
Large plastic slats, comfortable and easy to maintain.
Folding leg guided by an articulated arm.
Structure made from white aluminium tube Ø 25mm x 2mm.
Concealed fixings.
Dimensions: 430 x 465 x 480mm.
Folded dimensions: 82 x 565mm .
Leg height can be adjusted up to 8mm.
Ergonomic non-slip side grips.
Seat height: 480mm.
Tested to over 200kg. Maximum recommended user weight: 135kg.
CE marked.
TECHNICAL FEATURES
Lift-up shower seat with ALU leg- Large model
Ref. 510410
| Height | 480mm |
|---|---|
| Depth | 430mm |
| Width | 465mm |
| Finish | White powder-coated aluminium |
Description
Wall-mounted shelf to conceal fixings in showers
Ref. 511921W
Matte white, wall-mounted shelf to conceal fixings without mounting bracket for Be-Line shower seats.
Conceals the mounting bracket when the lift-up shower seat is removed.
Reduces the number of lift-up shower seats in a facility, allowing installation only when required. E.g. hotels or hospitals providing short-term accommodation for people with reduced mobility.
Dimensions: 55 x 275 x 90mm.
Technical features
Wall-mounted shelf to conceal fixings in showers
Ref. 511921W
| Height | 90mm |
|---|---|
| Depth | 55mm |
| Width | 275mm |
| Finish | Matte white |
DESCRIPTION
Wall-mounted shelf for showers to conceal fixings
Ref. 511921FW
Matte white wall-mounted shelf for showers to conceal fixings with mounting bracket for Be-Line shower seats.
Conceals the mounting bracket when the lift-up shower seat is removed.
Reduces the number of lift-up shower seats in a facility, allowing installation only when required. E.g. hotels or hospitals providing short-term accommodation for people with reduced mobility.
Supplied with stainless steel screws Ø 8 x 70mm for concrete walls.
Dimensions: 55 x 275 x 90mm.
TECHNICAL FEATURES
Wall-mounted shelf for showers to conceal fixings
Ref. 511921FW
| Height | 90mm |
|---|---|
| Depth | 55mm |
| Width | 275mm |
| Finish | Matte white |
Be-line lift-up shower seat
Ref. 511920C
Be-line removable lift-up shower seat for people with reduced mobility.
Large model.
Removable: easy to remove with anti-theft locking system. Reduces the number of shower seats in a facility, allowing installation only when required e.g. hotels or hospitals providing short-term accommodation for people with reduced mobility.
Retained in upright position. Slowed down descent.
Suitable for intensive use in public places or the healthcare sector.
Solid, reinforced seat made from high strength polymer which can be installed, without a supporting leg, on any suitable wall.
Non-slip surface.
Metallised anthracite powder-coated aluminium provides a good visual contrast with the wall.
Solid aluminium mounting bracket.
5 concealed fixing points.
Supplied with stainless steel screws Ø 8 x 70mm for concrete walls.
Dimensions: 455 x 450 x 90mm.
Folded dimensions: 85 x 470mm.
Tested to over 200kg. Maximum recommended user weight: 135kg.
Be-line lift-up shower seat
Ref. 511920W
Be-line removable lift-up shower seat for people with reduced mobility.
Large model.
Removable: easy to remove with anti-theft locking system. Reduces the number of shower seats in a facility, allowing installation only when required e.g. hotels or hospitals providing short-term accommodation for people with reduced mobility.
Retained in upright position. Slowed down descent.
Suitable for intensive use in public places or the healthcare sector.
Solid, reinforced seat made from high strength polymer which can be installed, without a supporting leg, on any suitable wall.
Non-slip surface.
Matte white powder-coated aluminium provides a good visual contrast with the wall.
Solid aluminium mounting bracket.
5 concealed fixing points.
Supplied with stainless steel screws Ø 8 x 70mm for concrete walls.
Dimensions: 455 x 450 x 90mm.
Folded dimensions: 83 x 470mm.
Tested to over 200kg. Maximum recommended user weight: 135kg.
Be-line lift-up shower seat with leg
Ref. 511930C
Be-line removable lift-up for people with reduced mobility.
Large model.
Removable: easy to remove with anti-theft locking system. Reduces the number of shower seats in a facility, allowing installation only when required e.g. hotels or hospitals providing short-term accommodation for people with reduced mobility.
Retained in upright position. Slowed down descent.
Suitable for intensive use in public places or the healthcare sector.
Solid seat made from high strength polymer.
Non-slip surface.
Reinforced by a central, hinged leg which folds automatically.
Metallised anthracite finish provides a good visual contrast with the wall.
5 concealed fixing points.
Supplied with stainless steel screws Ø 8 x 70mm for concrete walls.
Dimensions: 443 x 450 x 480mm.
Folded dimensions: 87 x 541mm.
Tested to over 200kg. Maximum recommended user weight: 135kg.
Technical features
Be-line lift-up shower seat with leg
Ref. 511930C
| Height | 480mm |
|---|---|
| Depth | 443mm |
| Width | 450mm |
| Finish | Metallised anthracite |
Be-line lift-up shower seat with leg
Ref. 511930W
Be-line removable lift-up for people with reduced mobility.
Large model.
Removable: easy to remove with anti-theft locking system. Reduces the number of shower seats in a facility, allowing installation only when required e.g. hotels or hospitals providing short-term accommodation for people with reduced mobility.
Retained in upright position. Slowed down descent.
Suitable for intensive use in public places or the healthcare sector.
Solid seat made from high strength polymer.
Non-slip surface.
Reinforced by a central, hinged leg which folds automatically.
Matte white aluminium finish provides a good visual contrast with the wall.
5 concealed fixing points.
Supplied with stainless steel screws Ø 8 x 70mm for concrete walls.
Dimensions: 443 x 450 x 480mm.
Folded dimensions: 87 x 541mm.
Tested to over 200kg. Maximum recommended user weight: 135kg.
Technical features
Be-line lift-up shower seat with leg
Ref. 511930W
| Height | 480mm |
|---|---|
| Depth | 443mm |
| Width | 450mm |
| Finish | Matte white |
Shower riser rail with EP mechanical mixer
Ref. 2239EPSKIT
• Wall-mounted shower kit.
Ø 40mm ceramic cartridge with pressure-balancing (EP) and pre-set maximum temperature limiter.
Total anti-scalding safety: HW flow rate is reduced if CW supply fails (and vice versa).
Constant temperature regardless of pressure or flow rate variations.
Flow rate regulated at 9 lpm.
Chrome-plated brass body and sculptured control lever.
M½" shower outlet with integrated non-return valve.
Mixer with 2 offset standard wall connectors M1/2" M3/4".
Filters and non-return valves
• Chrome-plated sliding shower head (ref. 811) on a chrome-plated riser rail (ref. 820) with soap dish and flexible hose (ref. 834T1).
Suitable for people with reduced mobility.
TECHNICAL CHARACTERISTICS
Shower riser rail with EP mechanical mixer
Ref. 2239EPSKIT
| Connector | M1/2" |
| Technology | SECURITHERM EP |
| Width | 175mm |
| Flow rate | 9 lpm |
| Temperature limiter | 39°C |
| Finish | Chrome-plated brass |
396,50 €
• Reversible solid phenolic folding shower seat, waterproof, black edged, frame manufactured in stainless steel AISI 304, satin finish and with a wall bracket to assure the maximum safety for the end-user.
• Suitable to install inside the shower.
• Designed to withstand a maximum load of 113 kg, provided it is properly mounted to the wall.
• Structural assembly shall be of welded construction and all exposed edges and corners shall be radiused and/or deburred.
• Model shall comply with accessible design guidelines (including ADAAG in the U.S.A.).
• “L-shaped” seat, made of solid phenolic ivory-colored with black edges, waterproof, shatterproof and easy to maintain. Reversible for left –or right- hand installation in the field. Secured to the frame with stainless steel carriage bolts and acorn nuts.
• AISI 304 stainless steel frame, satin finish.
• Non-slip and warm to the touch.
• Slots for water drainage.
• Opening and closing system made of AISI 304 stainless steel, satin finish.
Dushikomplekt RAVI liftiga ANTIBACTUS FM Mattson, spiraalne voolik
Dušilift invadušile
Shower set Antibactus
- Description
- Chrome
- Article number
- 34450140
PROPERTIES
- With drain valve
- Anti lime-scale hand shower and black spiral hose
- Chrome-plated shower bar
- Suitable for shower mixer with G1/2 downward outlet
- Water is drained out of the hose and shower when closing the valve
Kuni 100kg
Kuni 250 kg
Dušiiste põrandale CARE Normbau Ascento 548x437x623 mm, tumehall
Care Stool, 548 x 437 x 623 mm, Dark grey
- Ascento as Modular Seating Solution, expandible and combinable
- ergonomic formed seat with rounded outer edges upper extended bow arms that serve as as grab rails with non-slip rubber buffers in colour black
- Product : Hocker
- Product group : 8700
- Length : 548 mm
- Width : 437 mm
- Height : 623 mm
- Wide seat surface : 412 mm
- Depth of the seat surface : 419 mm
- Material : Polypropylen, Gestell aus Edelstahl, Werkstoff Nr. 1.4301 (A2, AISI 304)
- Surface : matt
- Colour : lieferbar in Dunkelgrau (018) und Weiß (019)
- Loading : max. 150 kg
Dušiiste põrandale CARE Normbau Ascento 548x437x623 mm, valge
Care Stool, 548 x 437 x 623 mm, White
-
- Product : Hocker
- Product group : 8700
- Length : 548 mm
- Width : 437 mm
- Height : 623 mm
- Wide seat surface : 412 mm
- Depth of the seat surface : 419 mm
- Material : Polypropylen, Gestell aus Edelstahl, Werkstoff Nr. 1.4301 (A2, AISI 304)
- Surface : matt
- Colour : lieferbar in Dunkelgrau (018) und Weiß (019)
- Loading : max. 150 kg
Duššiiste seinale
Duššiiste seinale
Duššiiste seinale
Duššiiste seinale
Dušitugi L-kujuline 800x800x70 matt must
Horisontaalne nurga käetugi, 3-punkti kinnitus. Toru d 32 mm.
• 90º wall to wall horizontal grab bar for showers, baths and changing rooms, with three anchoring points and with snap flange covers, made with stainless steel tube, folded in an "L" shape at 90º.
• Designed to achieve barrier-free accessibility in bathrooms and public spaces. This grab bar is suitable for specific spaces for the elderly or people with reduced mobility. Model suitable for collectivities.
• Stainless steel gives this bar great durability and great resistance to rust.
• The bar has three snap flange covers that conceal the anchoring screws to the wall and reinforce, even more, the beauty of the product once installed.
• Optionally, these bars can be electrically isolated by installing the Electrical Isolation Kit code KA0020.
• Supplied with all the necessary hardware to fix the bar to a brick wall.
General description
Mediepoxi / Medinox series
BD0700C BD0700CS Bright finish Satin finish
-
90o wall to wall horizontal grab bar for showers, baths and changing rooms, with three anchoring points and with snap flange covers, made with stainless steel tube, folded in an "L" shape at 90o.
-
Designed to achieve barrier-free accessibility in bathrooms and public spaces. This grab bar is suitable for specific spaces for the elderly or people with reduced mobility. Model suitable for collectivities.
-
Stainless steel gives this bar great durability and great resistance to rust.
-
The bar has three snap flange covers that conceal the anchoring screws to the wall and reinforce, even more, the beauty of the product once
installed.
-
Optionally, these bars can be electrically isolated by installing the Electrical Isolation Kit code KA0020.
-
Supplied with all the necessary hardware to fix the bar to a brick wall.
Components and materials
-
BD2700: 90o wall to wall horizontal grab bar with three anchoring points, made with AISI 201 stainless steel tube white finish.
-
BD2700B: 90o wall to wall horizontal grab bar with three anchoring points, made with AISI 201 stainless steel tube matte black finish.
-
BD0700C: 90o wall to wall horizontal grab bar with three anchoring points, made with AISI 304 stainless steel tube bright finish.
-
BD0700CS: 90o wall to wall horizontal grab bar with three anchoring points, made with AISI 304 stainless steel tube satin finish.
-
TUBING: made of stainless steel 32 mm diameter tube, seamless construction. The bending process guarantees the uniformity of the
diameter along the bends.
-
CONCEALED WALL BRACKET: three units made of stainless steel sheet, 3 mm thick and joined to the bar by welding to the ends of the
tube. It has three holes (BD2700 and BD2700B) or two holes (other references), with a diameter of 6.5 mm that allow the fixing of the bar
to the wall.
-
SNAP FLANGE COVER: three units that conceal the installation screws made of 1.5 mm thick polypropylene (BD2700 and BD2700B) or
0.8 mm thick stainless steel (other references).
Dušitugi L-kujuline 800x800x70 RST harjatud matt
Horisontaalne nurga käetugi, 3-punkti kinnitus. Toru d 32 mm.
• 90º wall to wall horizontal grab bar for showers, baths and changing rooms, with three anchoring points and with snap flange covers, made with stainless steel tube, folded in an "L" shape at 90º.
• Designed to achieve barrier-free accessibility in bathrooms and public spaces. This grab bar is suitable for specific spaces for the elderly or people with reduced mobility. Model suitable for collectivities.
• Stainless steel gives this bar great durability and great resistance to rust.
• The bar has three snap flange covers that conceal the anchoring screws to the wall and reinforce, even more, the beauty of the product once installed.
• Optionally, these bars can be electrically isolated by installing the Electrical Isolation Kit code KA0020.
• Supplied with all the necessary hardware to fix the bar to a brick wall.
General description
Mediepoxi / Medinox series
BD0700C BD0700CS Bright finish Satin finish
-
90o wall to wall horizontal grab bar for showers, baths and changing rooms, with three anchoring points and with snap flange covers, made with stainless steel tube, folded in an "L" shape at 90o.
-
Designed to achieve barrier-free accessibility in bathrooms and public spaces. This grab bar is suitable for specific spaces for the elderly or people with reduced mobility. Model suitable for collectivities.
-
Stainless steel gives this bar great durability and great resistance to rust.
-
The bar has three snap flange covers that conceal the anchoring screws to the wall and reinforce, even more, the beauty of the product once
installed.
-
Optionally, these bars can be electrically isolated by installing the Electrical Isolation Kit code KA0020.
-
Supplied with all the necessary hardware to fix the bar to a brick wall.
Components and materials
-
BD2700: 90o wall to wall horizontal grab bar with three anchoring points, made with AISI 201 stainless steel tube white finish.
-
BD2700B: 90o wall to wall horizontal grab bar with three anchoring points, made with AISI 201 stainless steel tube matte black finish.
-
BD0700C: 90o wall to wall horizontal grab bar with three anchoring points, made with AISI 304 stainless steel tube bright finish.
-
BD0700CS: 90o wall to wall horizontal grab bar with three anchoring points, made with AISI 304 stainless steel tube satin finish.
-
TUBING: made of stainless steel 32 mm diameter tube, seamless construction. The bending process guarantees the uniformity of the
diameter along the bends.
-
CONCEALED WALL BRACKET: three units made of stainless steel sheet, 3 mm thick and joined to the bar by welding to the ends of the
tube. It has three holes (BD2700 and BD2700B) or two holes (other references), with a diameter of 6.5 mm that allow the fixing of the bar
to the wall.
-
SNAP FLANGE COVER: three units that conceal the installation screws made of 1.5 mm thick polypropylene (BD2700 and BD2700B) or
0.8 mm thick stainless steel (other references).
Dušitugi L-kujuline 800x800x70 RST poleeritud
Horisontaalne nurga käetugi, 3-punkti kinnitus. Toru d 32 mm.
• 90º wall to wall horizontal grab bar for showers, baths and changing rooms, with three anchoring points and with snap flange covers, made with stainless steel tube, folded in an "L" shape at 90º.
• Designed to achieve barrier-free accessibility in bathrooms and public spaces. This grab bar is suitable for specific spaces for the elderly or people with reduced mobility. Model suitable for collectivities.
• Stainless steel gives this bar great durability and great resistance to rust.
• The bar has three snap flange covers that conceal the anchoring screws to the wall and reinforce, even more, the beauty of the product once installed.
• Optionally, these bars can be electrically isolated by installing the Electrical Isolation Kit code KA0020.
• Supplied with all the necessary hardware to fix the bar to a brick wall.
General description
Mediepoxi / Medinox series
BD0700C BD0700CS Bright finish Satin finish
-
90o wall to wall horizontal grab bar for showers, baths and changing rooms, with three anchoring points and with snap flange covers, made with stainless steel tube, folded in an "L" shape at 90o.
-
Designed to achieve barrier-free accessibility in bathrooms and public spaces. This grab bar is suitable for specific spaces for the elderly or people with reduced mobility. Model suitable for collectivities.
-
Stainless steel gives this bar great durability and great resistance to rust.
-
The bar has three snap flange covers that conceal the anchoring screws to the wall and reinforce, even more, the beauty of the product once
installed.
-
Optionally, these bars can be electrically isolated by installing the Electrical Isolation Kit code KA0020.
-
Supplied with all the necessary hardware to fix the bar to a brick wall.
Components and materials
-
BD2700: 90o wall to wall horizontal grab bar with three anchoring points, made with AISI 201 stainless steel tube white finish.
-
BD2700B: 90o wall to wall horizontal grab bar with three anchoring points, made with AISI 201 stainless steel tube matte black finish.
-
BD0700C: 90o wall to wall horizontal grab bar with three anchoring points, made with AISI 304 stainless steel tube bright finish.
-
BD0700CS: 90o wall to wall horizontal grab bar with three anchoring points, made with AISI 304 stainless steel tube satin finish.
-
TUBING: made of stainless steel 32 mm diameter tube, seamless construction. The bending process guarantees the uniformity of the
diameter along the bends.
-
CONCEALED WALL BRACKET: three units made of stainless steel sheet, 3 mm thick and joined to the bar by welding to the ends of the
tube. It has three holes (BD2700 and BD2700B) or two holes (other references), with a diameter of 6.5 mm that allow the fixing of the bar
to the wall.
-
SNAP FLANGE COVER: three units that conceal the installation screws made of 1.5 mm thick polypropylene (BD2700 and BD2700B) or
0.8 mm thick stainless steel (other references).
Dušitugi L-kujuline 800x800x70 valge
Horisontaalne nurga käetugi, 3-punkti kinnitus. Toru d 32 mm.
• 90º wall to wall horizontal grab bar for showers, baths and changing rooms, with three anchoring points and with snap flange covers, made with stainless steel tube, folded in an "L" shape at 90º.
• Designed to achieve barrier-free accessibility in bathrooms and public spaces. This grab bar is suitable for specific spaces for the elderly or people with reduced mobility. Model suitable for collectivities.
• Stainless steel gives this bar great durability and great resistance to rust.
• The bar has three snap flange covers that conceal the anchoring screws to the wall and reinforce, even more, the beauty of the product once installed.
• Optionally, these bars can be electrically isolated by installing the Electrical Isolation Kit code KA0020.
• Supplied with all the necessary hardware to fix the bar to a brick wall.
General description
Mediepoxi / Medinox series
BD0700C BD0700CS Bright finish Satin finish
-
90o wall to wall horizontal grab bar for showers, baths and changing rooms, with three anchoring points and with snap flange covers, made with stainless steel tube, folded in an "L" shape at 90o.
-
Designed to achieve barrier-free accessibility in bathrooms and public spaces. This grab bar is suitable for specific spaces for the elderly or people with reduced mobility. Model suitable for collectivities.
-
Stainless steel gives this bar great durability and great resistance to rust.
-
The bar has three snap flange covers that conceal the anchoring screws to the wall and reinforce, even more, the beauty of the product once
installed.
-
Optionally, these bars can be electrically isolated by installing the Electrical Isolation Kit code KA0020.
-
Supplied with all the necessary hardware to fix the bar to a brick wall.
Components and materials
-
BD2700: 90o wall to wall horizontal grab bar with three anchoring points, made with AISI 201 stainless steel tube white finish.
-
BD2700B: 90o wall to wall horizontal grab bar with three anchoring points, made with AISI 201 stainless steel tube matte black finish.
-
BD0700C: 90o wall to wall horizontal grab bar with three anchoring points, made with AISI 304 stainless steel tube bright finish.
-
BD0700CS: 90o wall to wall horizontal grab bar with three anchoring points, made with AISI 304 stainless steel tube satin finish.
-
TUBING: made of stainless steel 32 mm diameter tube, seamless construction. The bending process guarantees the uniformity of the
diameter along the bends.
-
CONCEALED WALL BRACKET: three units made of stainless steel sheet, 3 mm thick and joined to the bar by welding to the ends of the
tube. It has three holes (BD2700 and BD2700B) or two holes (other references), with a diameter of 6.5 mm that allow the fixing of the bar
to the wall.
-
SNAP FLANGE COVER: three units that conceal the installation screws made of 1.5 mm thick polypropylene (BD2700 and BD2700B) or
0.8 mm thick stainless steel (other references).
Eemaldatav ülesklapitav iste 380x563mm Carbon MUST 091
Cavere Suspendable shower seat 7847380
80 x 563 x 410mm, seat for 850mm top edge of shower handrail
made of Aluminium, with a scratch-resistant powder coating with antibacterial protection. Available in the Cavere® colour range, with padded seat made of PUR integral foam in colour anthracite. With non-corrosive metal core throughout, with maintenance-free brake, locked in the upright position, space saving, space required in lift-up position 197mm from wall. Can be suspended from Cavere® shower handrail. Maximum loading permitted 150 kgs, tested, respond TÜV requirement.
Eemaldatav ülesklapitav iste 450X563X340mm Nylon Care 400 Must
Nylon Care 400 Hanging seat FR,
with hygiene recess, 450 x 563 x 406 mm, Cavere Metallic anthracite, padded, colour black
- Nylon Care - a well-tried and proven product family with a wide range of variants, three product series suiting many different requirements
- for hanging in Cavere Care Shower handrails
- for hanging in Inox Care and Nylon Care Shower handrails
- with adjustable brake
- locked in place in vertical position
- Pad with non-corrosive metal core throughout,
- with adjustable brake
- with non-corrosive steel core throughout
- locked in place in vertical position
- steel reinforced hinges
- for top edge of shower handrail 770-800mm
- for top edge of shower handrail 850mm the seat height corresponds 460 mm (DIN18040 und ÖNORM B1600)
- retrofittable with armrest 7843100
- Product category : Hanging seat
- Product version : with hygiene recess
- Product group : 2000
- Length : 450 mm
- Width : 563 mm
- Height : 406 mm
- Wide seat surface : 450 mm
- Depth of the seat surface : 405 mm
- Additional colour : padded, colour black
- Material : aluminium
- Material addition : padded made of PUR integral foam
- Surface : scratch-resistant powder coating with antibacterial protection
- Colour : Cavere Metallic anthracite
- Colours available : available in White (019), Cavere Metallic anthracite (095) and Cavere Metallic silver (096)
- Loading : max. 150 kg
Nova2 Care
629,32 €
Nova2 Care
863,15 €
Nova2 Care
629,32 €
Nova2 Care
629,32 €
Nova2 Care
629,32 €
Nova2 Care
863,15 €
Idral tõstetav invatugi D30mm L700mm valge värv
EASY series folding grab bar different lengths, painted
With paper holder
Steel tube Ø 30
Cataphoretic treatment and epoxy powder coating
Fastenings not included
Inva tugitoru dushiliftiga 750x750x1200mm harjatud RST parem
Inox Care Shower handrail,
with shower head rail central, right, 750 x 750 x 1200 mm, Stainless steel, shower head holder, colour dark grey (018)
- Inox Care as a robust and timeless classic with bacteriostatic properties
- Shower head holder with easy adjustment to any height and angle, self-adjusting clamp maintenance-free
- with long operating handle and multi-purpose side hook
- with Rose Gasket for sealing of the drilling points according to German standard DIN 18534-1
- with stainless steel roses Ø 70mm for concealed screw fixing
- In case of lightweight partition walls a backfill made of min. 20mm hardwood is needed
- produced in accordance with Regulation (EU) 2017/745 on medical devices
- CE-certified
- meets the requirements of German standard DIN 18040 and Austrian standard ÖNORM B 1600
- supplied with stainless steel Torx screw sØ 6 x 70 mm and plugs
- Product category : Shower handrail
- Product version : with shower head rail central
- Product group : 5500
- Axle dimension a1 : 750 mm
- Axle dimension a2 : 750 mm
- Axle dimension a3 : 1200 mm
- Diameter : 32 mm
- Fixing points : 4 St.
- Fixing type : rosettes mounting
- Additional colour : shower head holder, colour dark grey (018)
- Material : stainless steel, material No. 1.4301 (A2, AISI 304)
- Material addition : Shower head holder made of polyamide
- Surface : brushed finish
- Version : right
- Colour : Stainless steel
- Loading : max. 175 kg
Inva tugitoru dushiliftiga 750x750x1200mm harjatud RST vasak
Inox Care Shower handrail,
with shower head rail central, left, 750 x 750 x 1200 mm, Stainless steel, shower head holder, colour dark grey (018)
- Inox Care as a robust and timeless classic with bacteriostatic properties
- Shower head holder with easy adjustment to any height and angle, self-adjusting clamp maintenance-free
- with long operating handle and multi-purpose side hook
- with Rose Gasket for sealing of the drilling points according to German standard DIN 18534-1
- with stainless steel roses Ø 70mm for concealed screw fixing
- In case of lightweight partition walls a backfill made of min. 20mm hardwood is needed
- produced in accordance with Regulation (EU) 2017/745 on medical devices
- CE-certified
- meets the requirements of German standard DIN 18040 and Austrian standard ÖNORM B 1600
- supplied with stainless steel Torx screw sØ 6 x 70 mm and plugs
- Product category : Shower handrail
- Product version : with shower head rail central
- Product group : 5500
- Axle dimension a1 : 750 mm
- Axle dimension a2 : 750 mm
- Axle dimension a3 : 1200 mm
- Diameter : 32 mm
- Fixing points : 4 St.
- Fixing type : rosettes mounting
- Additional colour : shower head holder, colour dark grey (018)
- Material : stainless steel, material No. 1.4301 (A2, AISI 304)
- Material addition : Shower head holder made of polyamide
- Surface : brushed finish
- Version : left
- Colour : Stainless steel
- Loading : max. 175 kg
Invakäepide dušiInvakäepide duši Cavere Care, Normbau 600mm Carbon must 091
- Cavere Care as an award-winning product family with excellent design for all requirements ergonomic by trigonometric handle contour
- In case of lightweight partition walls a backfill made of min. 20mm hardwood is needed
- CE-certified meets the requirements of German standard DIN 18040 and Austrian standard ÖNORM B 1600
- supplied with stainless steel Torx screw sØ 6 x 70 mm and plugs
- Product : Duschhandlauf
- Product group : 7000
- Axle dimension a1 : 600 mm
- Product : Duschhandlauf
- Product group : 7000
- Axle dimension a1 : 600 mm
- Fixing points : 2 St.
- Angle : 0 Grad
- Fixing type : L-support
- Material : Aluminium
- Surface : kratzfeste Pulverbeschichtung mit antibakteriellem Schutz (ausgenommen 091 Carbonschwarz)
- Version : left and right
- Colour : lieferbar in den Cavere Farben
- Loading : max. 150 kg
Invakäepide dušiInvakäepide duši Cavere Care, Normbau 600mm Metallik antratsiit 095
- Cavere Care as an award-winning product family with excellent design for all requirements ergonomic by trigonometric handle contour
- In case of lightweight partition walls a backfill made of min. 20mm hardwood is needed
- CE-certified meets the requirements of German standard DIN 18040 and Austrian standard ÖNORM B 1600
- supplied with stainless steel Torx screw sØ 6 x 70 mm and plugs
- Product : Duschhandlauf
- Product group : 7000
- Axle dimension a1 : 600 mm
- Product : Duschhandlauf
- Product group : 7000
- Axle dimension a1 : 600 mm
- Fixing points : 2 St.
- Angle : 0 Grad
- Fixing type : L-support
- Material : Aluminium
- Version : left and right
- Colour : lieferbar in den Cavere Farben
- Loading : max. 150 kg
satiin R/V teras
176,90 €
satiin R/V teras
150,47 €
satiin R/V teras
152,50 €
satiin R/V teras
158,60 €
600mm satii R/V teras
158,60 €
Käetugi 692mm sirge invakäepide must
Käetugi 692mm sirge
teras must epoksükate
d 32mm
toru paksus 1,5mm
Pelavajutav äärikukate d 81mm
• Straight bar with two concealed wall brackets that can be installed both horizontally and vertically made of 32 mm diameter stainless steel tube.
• Simple and elegant in design, this grab bar is suitable for people with reduced mobility, elderly people or the handicapped, especially designed to make their life a little bit easier.
• Grab bar has two snap flange covers that hide the installation screws from the wall, enhancing its beauty once installed.
• Designed to add support and comfort, this bar make the bathroom a much safer place for everyone. Ideal model for both public and private spaces.
• Available in up to six different sizes (depending on the model), this straight bar can be installed in the bathtub, in the shower, the toilet or in the sink.
• Optionally, they have a kit to avoid electrical conductivity Mediclinics code KA0020.
• Supplied with stainless steel hardware to install on brick wall.
Klappiste seinale ülespööratav 350x370cm HEWI Must
Product information
- construction consisting of wall bracket, bar, seat bracket and seat surface
- anti-slip, textured synthetic seat surface in HEWI colours 98 (signal white), 92 (anthracite grey) and 90 (jet black)
- wall bracket and bracket made of high-quality plastic in HEWI colours 98 (signal white), 92 (anthracite grey) and 90 (jet black), matching the seat surface
- additional wall support allows increased legroom as no floor support is necessary
- the slightly curved shape of the seat defines the sitting position and provides comfortable support
- seat can be folded up to save space
- seat depth when folded up 44 mm
- maintenance-free, permanently smooth-running joint
- load capacity up to 150 kg
- 350 mm wide, 370 mm deep and 230 mm high
- seat 350 mm wide and 340 mm deep
- for installation with corrosion-free and tested HEWI fixing material for different wall constructions (to be ordered separately)
- sealing tape and sealing discs for sealing the fixing points according to DIN 18534 are included in the scope of delivery
Normbau 2050300 Inox Care Lift-up tualettpaberi hoidja, 141 x 117mm
Inox Care Toilet roll holder 2050300, may be added at a later stage, 141 x 117mm
Fixing on stainless rail 32mm dia.,
141 x 117mm, made from Nylon, colour ..., with self-adjusting and maintenance-free roll-brake, for fixing to NORMBAU sanitary fittings.
- Product : Klappsitz, mit Armlehnen
- Product group : 8700
- System : vario
- Length : 584 mm
- Width : 512 mm
- Height : 297 mm
- Wide seat surface : 412 mm
- Depth of the seat surface : 419 mm
- Material : Polypropylen, Trägerkonsole und Wandplatte aus Aluminium, Grundplatte aus Edelstahl, Werkstoff Nr. 1.4301 (A2, AISI 304)
- Surface : matt
- Colour : lieferbar in den Ascento Farben
- Loading : max. 150 kg
