Vannitoa Aksessuaarid ja Sisustuselemendid Mediclinics Poleeritud Roostevabsat Terasest
Vannitoa Aksessuaarid ja Sisustuselemendid Avalikutesse Tualettidesse: Mediclinics Poleeritud Roostevaba Teras
Avalikud tualettruumid on kohad, kus tähelepanu pööratakse nii funktsionaalsusele kui ka esteetikale. Mediclinicsi poleeritud roostevaba terasest vannitoa aksessuaarid ja sisustuselemendid on ideaalne valik, mis ühendab moodsa disaini, vastupidavuse ja hügieeni.
Kaasaegne Disain ja Elegants:
Mediclinicsi poleeritud roostevaba teras annab avalikele tualettruumidele kaasaegse ja elegantsi ilme. Selle särav ja läikiv viimistlus lisab ruumile stiili ning sobib erinevate interjööridega.
Vastupidavus ja Kulumiskindlus:
Avalikes tualettruumides on suur külastatavus, mistõttu on oluline valida aksessuaarid, mis suudavad vastu pidada igapäevasele kasutusele. Mediclinicsi poleeritud roostevaba teras on tuntud oma vastupidavuse poolest, tagades pikaajalise kulumiskindluse.
Funktsionaalsus ja Praktilisus:
Avalikud tualettruumid vajavad praktilisi lahendusi, mis aitavad hoida ruumi puhtana ja korrastatuna. Mediclinicsi poleeritud roostevaba terasest vannitoa aksessuaarid hõlmavad mitmesuguseid tooteid, nagu kätekuivatid, seebidosaatorid, prügikastid ja invakäepidemed, mis kõik aitavad luua mugava ja kasutajasõbraliku keskkonna.
Hügieeniline ja Lihtsasti Hooldatav:
Roostevaba teras on materjal, mis on tuntud oma hügieenilisuse poolest. Selle sile pind on lihtsasti puhastatav ja vastupidav bakteritele ning mustusele.
Mediclinicsi Kvaliteet:
Mediclinics on juba aastaid olnud usaldusväärne nimi sanitaartehnika valdkonnas. Nende poleeritud roostevaba terasest vannitoa aksessuaarid ja sisustuselemendid jätkavad selle traditsiooni, pakkudes kvaliteeti ja usaldusväärsust.
Leia Parim Valik PEGU E-poest:
Tutvu Mediclinicsi poleeritud roostevaba terasest vannitoa aksessuaaride ja sisustuselementide valikuga PEGU e-poes. Seal saad valida parimaid lahendusi, mis aitavad luua avalikes tualettides meeldiva ja kaasaegse atmosfääri.
Kujunda avalikud tualettruumid stiilselt ja funktsionaalselt Mediclinicsi poleeritud roostevaba terasest vannitoa aksessuaaride ja sisustuselementidega, mis sobivad suurepäraselt erinevate avalike ruumidega.
Desinfektandi dosaator Mediclinics 1.5L R-V teras poleeritud
250 x 110 x 175 mm
• Spray soap dispenser of 1.5 L capacity, manufactured in stainless steel AISI 304, 0,8 mm thick, to be installed directly on the wall and lever-operated by means of an stainless steel lever.
• Available in four finishes (white, black, bright and satin) these foam soap dispenser models have a functional, robust and trendy design that matches the new range of Mediclinics bathroom accessories. This allows this soap dispenser to blend into any space perfectly.
• Suitable for high traffic facilities and for public use.
• Dispenses liquid disinfectant soaps.
Desoaine spray dosaator Mediclinics sensoriga kontaktivaba 1000ml R/V teras poleeritud
SURFACE AUTOMATIC SPRAY SOAP DISPENSER
Automatic wall-mounted spray soap dispenser, made of AISI 304 stainless steel, satin finish
• Automatic wall-mounted spray soap dispenser of 1 L capacity, manufactured in stainless steel AISI 304, 0.8 mm thick.
• Available in four finishes (white, black, bright and satin) these soap dispenser models have a functional, robust and trendy design that matches the new range of Mediclinics bathroom accessories. This allows this soap dispenser to blend into any space perfectly.
• Suitable for high traffic facilities and for public use.
• Level display located in the front part of the soap dispenser. It constantly indicates the level of soap available inside the soap dispenser.
• Operates on 6 AA alkaline batteries (not provided) or optionally, with an AC adapter. Order reference DJS0039A/B/C/CS-TRAFO to receive the automatic soap dispenser able to be connected to the mains with the AC adapter.
• Dispenses hand sanitizer spray.
Duššiiste seinale
Dušitugi L-kujuline 800x800x70 RST poleeritud
Horisontaalne nurga käetugi, 3-punkti kinnitus. Toru d 32 mm.
• 90º wall to wall horizontal grab bar for showers, baths and changing rooms, with three anchoring points and with snap flange covers, made with stainless steel tube, folded in an "L" shape at 90º.
• Designed to achieve barrier-free accessibility in bathrooms and public spaces. This grab bar is suitable for specific spaces for the elderly or people with reduced mobility. Model suitable for collectivities.
• Stainless steel gives this bar great durability and great resistance to rust.
• The bar has three snap flange covers that conceal the anchoring screws to the wall and reinforce, even more, the beauty of the product once installed.
• Optionally, these bars can be electrically isolated by installing the Electrical Isolation Kit code KA0020.
• Supplied with all the necessary hardware to fix the bar to a brick wall.
General description
Mediepoxi / Medinox series
BD0700C BD0700CS Bright finish Satin finish
-
90o wall to wall horizontal grab bar for showers, baths and changing rooms, with three anchoring points and with snap flange covers, made with stainless steel tube, folded in an "L" shape at 90o.
-
Designed to achieve barrier-free accessibility in bathrooms and public spaces. This grab bar is suitable for specific spaces for the elderly or people with reduced mobility. Model suitable for collectivities.
-
Stainless steel gives this bar great durability and great resistance to rust.
-
The bar has three snap flange covers that conceal the anchoring screws to the wall and reinforce, even more, the beauty of the product once
installed.
-
Optionally, these bars can be electrically isolated by installing the Electrical Isolation Kit code KA0020.
-
Supplied with all the necessary hardware to fix the bar to a brick wall.
Components and materials
-
BD2700: 90o wall to wall horizontal grab bar with three anchoring points, made with AISI 201 stainless steel tube white finish.
-
BD2700B: 90o wall to wall horizontal grab bar with three anchoring points, made with AISI 201 stainless steel tube matte black finish.
-
BD0700C: 90o wall to wall horizontal grab bar with three anchoring points, made with AISI 304 stainless steel tube bright finish.
-
BD0700CS: 90o wall to wall horizontal grab bar with three anchoring points, made with AISI 304 stainless steel tube satin finish.
-
TUBING: made of stainless steel 32 mm diameter tube, seamless construction. The bending process guarantees the uniformity of the
diameter along the bends.
-
CONCEALED WALL BRACKET: three units made of stainless steel sheet, 3 mm thick and joined to the bar by welding to the ends of the
tube. It has three holes (BD2700 and BD2700B) or two holes (other references), with a diameter of 6.5 mm that allow the fixing of the bar
to the wall.
-
SNAP FLANGE COVER: three units that conceal the installation screws made of 1.5 mm thick polypropylene (BD2700 and BD2700B) or
0.8 mm thick stainless steel (other references).
130º angled grab bar made of AISI 304 stainless steel, polished finish
• 130º angled grab bar made of a 32 mm diameter tube and designed to provide relief and assistance around the bathroom.
• Stylish design making this grab bar ideal for the bathroom and other rooms in the house.
• Unique angled design provides support no matter the position.
• Durable, secure and stable, these grab bars provides confidence and stability when getting in or out of the bath or shower.
• 32mm diameter bar for easier gripping.
• Concealed fixings thanks to their beautiful snap flange covers.
Käetugi 695mm sirge
R/V teras AISI304
d 32mm
toru paksus 1,5mm
Pelavajutav äärikukate d 81mm
Käetugi 738mm ületõstetav
R/V teras AISI304
d 32mm
toru paksus 1,5mm
Pelavajutav äärikukate d 85mm
Käetugi 845mm sirge
R/V teras AISI304
d 32mm
toru paksus 1,5mm
Pelavajutav äärikukate d 81mm
-Ülekiire kuivatusaeg
-Minimaalne Energiakulu
-Minimaalset CO2 heitmeid
-Reguleeritav ülekiire mootor
-Kindel ja kompaktne disain
-GreenSeci nimekirjaar
Kuivatuseaeg on ainult 10-15 sek!!!
-Ülekiire kuivatusaeg
-Minimaalne Energiakulu
-Minimaalset CO2 heitmeid
-Reguleeritav ülekiire mootor
-Kindel ja kompaktne disain
-GreenSeci nimekirjaar
Kuivatuseaeg on ainult 10-15 sek!!!
-Ülekiire kuivatusaeg
-Minimaalne Energiakulu
-Minimaalset CO2 heitmeid
-Reguleeritav ülekiire mootor
-Kindel ja kompaktne disain
-GreenSeci nimekirjaar
Kuivatuseaeg on ainult 10-15 sek!!!
-Ülekiire kuivatusaeg
-Minimaalne Energiakulu
-Minimaalset CO2 heitmeid
-Reguleeritav ülekiire mootor
-Kindel ja kompaktne disain
-GreenSeci nimekirjaar
Kuivatuseaeg on ainult 10-15 sek!!!
-Ülekiire kuivatusaeg
-Minimaalne Energiakulu
-Minimaalset CO2 heitmeid
-Reguleeritav ülekiire mootor
-Kindel ja kompaktne disain
-GreenSeci nimekirjaar
Kuivatuseaeg on ainult 10-15 sek!!!
Kätekuivati Mediclinics Machflow poleeritud rostevaba terasest korpusega AISI304
Turvaline ja võimas mudel.
-Ülekiire kuivatusaeg
-Minimaalne Energiakulu
-Minimaalset CO2 heitmeid
-Reguleeritav ülekiire mootor
-Kindel ja kompaktne disain
-GreenSeci nimekirjaar
Kuivatuseaeg on ainult 10-15 sek!!!
Keevisõmbluseta korpus on aluste kinnitatud kahe vandaalikindla poldiga ja lukustatud spetsiaalse Saniflow võtmega
3mm paksune alumiinium alus
Tulekindlast plastist ventilaatorikamber
Termostaatlülitiga F-klassi universaalne harjadega mootor
Alumiiniumist tsentrifugaalne topeltsümmetriline õhuvõtuventilaatori tiivik
Elemendi on termokaitselüliti
Elektroisolatsioon klass 1
Kaitseklass IP23
Saniflow® sensor operated hand dryers
As part of this wide range of dryers, these are manufactured using a variety of materials and finishes, with different functionalities to be used in any public washroom environment. Automatic and manually operated models, with weld free casing available in a wide variety of materials and finishes, product references granting Saniflow® dryers a proven versatility.
Also, Mediclinics offers the Saniflow® line recessed mounting kit, a solution that was developed for installing this family of hand dryers inside a metal cabinet, in compliance with standard ADA/UNE for eliminating architectural barriers in washrooms.
It is worth mentioning that thanks to their long trajectory and presence, these hand dryers have become a reference nationally and internationally. Some of the characteristics that have made this model unique are its great power and air flow, its 360º rotating nozzle of exclusive design, its internal components for minimizing noise and vibrations and its anti-vandalism features.
Saniflow® dryers are made according to the highest quality and safety standards: Includes a thermal cut off, automatic disconnect system, safety screws and special key opener.
Thus, these are proven models with a long durability and complete reliability, with anti-vandalism features and designed to be installed in high traffic of people such as airports, large hotels, sport centres, large recreational areas and large official organizations, among others
Kätekuivati U-FLOW ultrakiire 8/10 seconds 72.5 dBA Eco mode hõbedane satiin ABS
Uus ultrakiire kätekuivati, käte läbi tüüpi U flow®, ABS-kattega, hõbedane satiin viimistlus
HAND DRYER U-FLOW
New ultra-fast hand dryer, hands-through type U flow®, with ABS cover, satin finish.
• U-flow automaatne kätekuivati ABS-kattega, hõbedane satiin viimistlus.
• Selle uuenduslik ja ergonoomiline U-kujuline disain võimaldab täielikku liikumisvabadust, muutes kätekuivatamise ainulaadseks kaitse- ja hügieenikogemuseks.
• U-Flow on "käte läbi", kiire, energiasäästlik, keskkonnasõbralik, hügieeniline ja stiilne kätekuivati, sobilik suure liiklusega rajatistele.
• Sellel on üks paar IR-andureid mõlemal "U" avause küljel käte kohesteks tuvastamiseks.
• Masinale on lisatud kiirühenduse / lahtivõtmise komplekt (pistikühenduse süsteem), mis võimaldab kätekuivati kiiret ja ohutut paigaldamist ja eemaldamist, muutes hoolduse palju tõhusamaks ja vähendades samal ajal kulusid.
• Sellel on HEPA-filtri keskmine osa, mis filtreerib õhus olevad tahked osakesed (õietolm, tolmulestad, tubakasuits jne), parandades oluliselt õhu kvaliteeti.
• Kaasas on ionisaator ("Ion Hygienic" tehnoloogia), mis puhastab õhku negatiivselt laetud osakeste (anionide) kaudu, kõrvaldades paljud õhu kaudu kantavad osakesed ja mikroobid, muutes selle tervislikumaks ja puhtamaks. Need ioonid pärsivad mikroorganismide paljunemist tootes kogu selle eluea jooksul.
• Biocote® antimikroobne ja antibakteriaalne kaitse hõbedaioonide tehnoloogia alusel. BioCote Antimicrobial Technology vähendab bakterite ja hallituse kasvu kuni 99,9%.
• Maksimaalne õhukiirus 350 km/h.
• Kuivatab käed vaid 8 / 10 sekundiga.
• Reguleeritav mootorivõimsus võimaldab elektritarbimist reguleerida vahemikus 420 kuni 1100 W.
• 30-sekundiline turvataimer.
• Madalaim müratase oma kategoorias (72,5 dBA ökorežiimis).
• Takistab vee sattumist põrandale: sellel on kaks eemaldatavat veepaaki ja seda saab otse ühendada tualettrantši kaudu reovee eemaldamiseks.
• Sellel on lõhnu neutraliseerivad pärlid, et luua vannitoas puhas ja meeldiv õhkkond. (Viide RCFB001).
Kätepaberidosaator Mediclinics DT2106C R/V teras, poleeritud
Korpuse paksus 0,8 mm
Roostevaba teras AISI 304, poleeritud
kaal 1,8 kg
Rätikud max 260x100mm
C/Z volditud rätikute mahutavas 400-600 tk
Korpuse paksus 0,8 mm
AISI 304 roostevaba teras, poleeritud
kaal 1,8 kg
Rätikud max 260x100mm
C/Z volditud rätikute mahutavas 400-600 tk
• Bathroom towel rail with double bar, 600 mm in length with double wall fixation and a hidden wall mounting system, made of AISI 304 stainless steel, from Mediclinics’ Aura series.
• With an up-to-date design which brings a minimalist and creative touch to your bathroom, this towel rail is ideal for finishing off elegant and modern spaces.
• This double towel rail is very resistant and durable thanks to its high-quality, anti-corrosive and highly resistant stainless steel, and is perfect for ensuring that your bathroom is always tidy and your towels perfectly placed.
• An essential bathroom accessory, this towel rail is ideal for bathrooms in hotels, restaurants, hospitals and nursing homes, as well as for your own home.
• Product suitable for public use.
• Includes stainless steel hardware kit for an easy, convenient and quick installation on brick walls.
• Straight towel rail for bathroom, 600 mm in length with double wall fixation, from Mediclinics’ Aura series.
• Made from AISI 304 stainless steel, this bathroom towel rail has a hidden wall mounting system.
• Practical and functional, these wall mounted towel rails, with a minimalist design, are perfect for creating fresh, elegant and modern bathroom spaces.
• Ideal for installing in your own home or in the bathrooms of hotels, restaurants, hospitals and nursing homes. Product suitable for public use.
• It allows you to optimize and keep the bathroom space tidy, making it one of the most essential bathroom accessories.
• Thanks to the high-quality, anti-corrosive and highly resistant stainless steel, these wall mounted towel rails are extremely durable.
• Includes stainless steel hardware to install the towel rail on a brick wall.
• Straight towel rail for bathroom, 600 mm in length with double wall fixation and a hidden wall mounting system, made of AISI 304 stainless steel, from Mediclinics’ Harmonía series.
• This towel rail has a minimalist design and is ideal for finishing off elegant and modern bathrooms, as it is one of the most essential bathroom accessories.
• Ideal for bathrooms in hotels, restaurants, hospitals and nursing homes, as well as for your own home.
• Product suitable for public use.
• Maximum functionality which allows you to keep your bathroom perfectly tidy, through the means of a very practical solution.
• Extremely durable thanks to the high-quality, anti-corrosive and highly resistant stainless steel.
• Includes stainless steel hardware for installation on brick walls.
• Bathroom towel rail with shelf, with four fixation points and a hidden wall mounting system, made of AISI 304 stainless steel, from Mediclinics’ Aura series.
• With an up-to-date design which brings elegance and creativity to your bathroom, this towel rail with shelf allows you to keep your towels tidy and nearby for a greater level of comfort when getting out of the shower.
• The high quality of the stainless steel makes this bathroom accessory very resistant and durable.
• Its four fixation points and hidden wall mounting system allow this bathroom towel rail with shelf to be securely fixed to the wall with the screws perfectly out of sight.
• An essential bathroom accessory, this towel rail is ideal for bathrooms in hotels, hospitals and nursing homes, as well as for your own home.
• Product suitable for public use.
• Includes stainless steel hardware for installation on brick walls.
• Towel rack made of AISI 304 stainless steel with a hidden wall mounting system and four fixation points, from Mediclinics’ Harmonia series.
• Its up-to-date and functional design gives it a touch of elegance and creativity, while it also allows you to keep your towels tidy and nearby for a greater level of comfort when getting out of the shower.
• The high quality of the stainless steel makes this bathroom accessory very resistant and durable.
• The hidden wall mounting system of this towel rack and its four fixation points mean that the installation screws are not visible and that it is perfectly fixed to the wall.
• An essential bathroom accessory, this towel rail is ideal for bathrooms in hotels, hospitals and nursing homes, as well as for your own home.
• This bathroom towel shelf is also suitable for public use.
• Includes stainless steel hardware to install on brick walls.
• Straight grab bar with snap flange made of AISI 304 stainless steel, for horizontal, vertical or slanting installation.
• Suitable for specific bathrooms for people with mobility problems, elderly people or the handicapped. Model suitable for both home and public use.
• This safety bar provides an easily accessible grip all around.
• Highest durability and rusting resistance.
• Optionally, they have a kit to avoid electrical conductivity (code KA0020).
• Stainless steel nuts and volts for masonry walls included.
Käetugi 537mm sirge
R/V teras AISI304
d 32mm
toru paksus 1,5mm
Pelavajutav äärikukate d 81mm
General description
L454 x L869 mm
-
Grab bar, 90o angle to the right (BAD090C & BAD090CS) or to the left (BAI090C & BAI090CS) with snap flange cover, made of stainless steel AISI 304, for showers, baths and changing rooms.
-
These grab bars are very useful and highly recommended to achieve barrier-free accessibility both residential and public spaces.
-
Concealed screw mounting flanges.
-
Highest durability and rusting resistance.
-
Mounting hardware for brick wall is included for easy installation.
Components and materials
-
BAD090C & BAI090C: AISI 304 stainless steel, bright finish.
-
BAD090CS & BAI090CS: AISI 304 stainless steel, satin finish.
-
TUBING: made of 32 mm diameter tube, seamless construction. The bending process guarantees the uniformity of the diameter along
the bends.
-
CONCEALED MOUNTING FLANGE: three units made of AISI 304 stainless steel, 3 mm thick. Incorporates two Ø 6.5 mm screws holes
for wall mounting.
-
SNAP FLANGE COVER: three units made of stainless steel AISI 304, 1.5 mm thick and Ø 82 mm. Each cover snaps over mounting
flange to conceal mounting screws.
material:AISI 304 stainless steel | finish:Satin
90º angled grab bar
Solutions with several ergonomics and functionalities and with the possibility of having different materials and finishes. Mediclinics offers professionals a wide range of grab bars for toilets to help persons with reduced mobility use the facilities. Within this range, two product lines are available:
Medinox Series
State of the art design, high durability and easy to maintain. The process used for bending the grab bars guarantees uniformity in the diameter of its curves. Built using AISI 304 stainless steel with a bright and satin finish.
Mediepoxy Series
Solutions manufactured with a corrosion resistant treatment, ideal for very harsh environments, with a low need for maintenance and long durability. The grab bars for toilets are made of steel with an epoxy finish.
Mediclinics grab bars for toilets include a snap flange cover for installation out of sight, offering a perfect visual finish and allowing to be easily blended in with the decoration of the room.
Apart from the grab bars for toilet, Mediclinics provides shower seats made of AISI 304 stainless steel, which are robust, safe and suitable for installation in harsh environments.
General description
-
Wall-floor grab bar, with three support points, made of a diameter of 32 mm AISI 304 stainless steel tube, bent in an "L" shape at 90o and with a 32mm diameter lateral arm, welded on the lower part of the grab bar and also bent at 90°.
-
With snap flange covers that conceal the installation screws, improving the aesthetics of the bars once installed on the wall.
-
These grab bars offer a great safety and comfort to the user, helping to make the bathroom much safer for the elderly or those with reduced
mobility. Models suitable for public use.
-
Well suited for keeping bathrooms and public enclosures barrier-free.
-
Highest durability and great resistance to rusting.
-
Optionally, these grab bars can be electrically isolated, installing the electrical isolation kit code KA0020.
-
Supplied with plugs and screws to fix the bar to a brick wall.
Components and materials
-
BSD020C: right hand grab bar made of AISI 304 stainless steel tube, bright finish.
-
BSI020C: left hand grab bar made of AISI 304 stainless steel tube, bright finish.
-
BSD020CS: right hand grab bar made of AISI 304 stainless steel tube, satin finish.
-
BSI020CS: left hand grab bar made of AISI 304 stainless steel tube, satin finish.
-
TUBING: made of a 32 mm diameter tube, seamless construction. The bending process guarantees the uniformity of the diameter along the bends.
-
CONCEALED MOUNTING FLANGE: three units made of AISI 304 stainless steel, 3 mm thick. Incorporates two Ø 6.5 mm screw holes for wall mounting.
-
SNAP FLANGE COVER: three units made of AISI 304 stainless steel, 0.8 mm thick and Ø 82 mm. Each cover snaps over mounting flange to conceal mounting screws.
-
General description
-
Wall to wall grab bar with three support points, made of diameter 32 mm AISI 304 stainless steel tube, to be installed in the washbasins and toilets.
-
With snap flange covers to conceal the screws, helping to achieve a beautiful and sleek look and protecting the flange surfaces from damage, dust, moisture and foreign particles.
-
Ideal to design barrier-free accessibility, both domestic and commercial places, these grab bars help make the lives easier for the handicapped and elderly people.
-
Highest durability and rusting resistance.
-
Optionally, these bars can be electrically isolated by installing the electrical isolation Kit code KA0020.
-
These grab bars are supplied with a kit to fix the bar to a brick wall.
Components and materials
-
BFD600C: grab bar right hand, made of diameter 32 mm AISI 304 stainless steel tube, bright finish.
-
BFI600C: grab bar left hand, made of diameter 32 mm AISI 304 stainless steel tube, bright finish.
-
BFD600CS: grab bar right hand, made of diameter 32 mm AISI 304 stainless steel tube, satin finish.
-
BFI600CS: grab bar left hand, made of diameter 32 mm AISI 304 stainless steel tube, satin finish.
-
TUBING: made of 32 mm diameter tube, seamless construction. The bending process guarantees the uniformity of the diameter along the bends.
-
CONCEALED MOUNTING FLANGE: three units made of AISI 304 stainless steel, 3 mm thick. Incorporates two Ø 6.5 mm screws holes for wall mounting.
-
SNAP FLANGE COVER: three units made of stainless steel AISI 304, 0.8 mm thick and Ø 82 mm. Each cover snaps over mounting flange to conceal mounting screws.
General description
-
Wall to wall grab bar with three support points, made of diameter 32 mm AISI 304 stainless steel tube, to be installed in the washbasins and toilets.
-
With snap flange covers to conceal the screws, helping to achieve a beautiful and sleek look and protecting the flange surfaces from damage, dust, moisture and foreign particles.
-
Ideal to design barrier-free accessibility, both domestic and commercial places, these grab bars help make the lives easier for the handicapped and elderly people.
-
Highest durability and rusting resistance.
-
Optionally, these bars can be electrically isolated by installing the electrical isolation Kit code KA0020.
-
These grab bars are supplied with a kit to fix the bar to a brick wall.
Components and materials
-
BFD600C: grab bar right hand, made of diameter 32 mm AISI 304 stainless steel tube, bright finish.
-
BFI600C: grab bar left hand, made of diameter 32 mm AISI 304 stainless steel tube, bright finish.
-
BFD600CS: grab bar right hand, made of diameter 32 mm AISI 304 stainless steel tube, satin finish.
-
BFI600CS: grab bar left hand, made of diameter 32 mm AISI 304 stainless steel tube, satin finish.
-
TUBING: made of 32 mm diameter tube, seamless construction. The bending process guarantees the uniformity of the diameter along the bends.
-
CONCEALED MOUNTING FLANGE: three units made of AISI 304 stainless steel, 3 mm thick. Incorporates two Ø 6.5 mm screws holes for wall mounting.
-
SNAP FLANGE COVER: three units made of stainless steel AISI 304, 0.8 mm thick and Ø 82 mm. Each cover snaps over mounting flange to conceal mounting screws.
Technical specifications
Dimensions 825 x 807 x 100 mm
Bar and leg diameter Wall plate thickness Ø 32 mm 3,0 mm
Paper roll dispenser diameter Ø 10 mm
• The Speedflow® Plus line of hand dryers is categorized within the eco-fast range of product but with the added value of complying with the requirements of ADAAG for accessibility of public washrooms. This regulation requires that the depth of the dryer cannot exceed 100 mm to facilitate access and movement to people with disabilities inside the washroom.
• The new Speedflow® Plus hand dryer is especially suitable for places with a high traffic frequency such as airports, shopping centers, sports facilities, etc.
• Energy efficient, this hand dryer presents very low power consumption. With a maximum power of 850 W, this hand dryer, depending on the configuration applied, consumes only between 0.6 and 2.8 watts per drying cycle and 0.4 W in stand-by mode, one of the lowest energy consumption in the market.
• Fast (maximum air speed 400 km / h) and quiet (57-65 dBA). Dries hands in only 12 seconds.
• Adjustable power motor to regulate power consumption between 180 and 850 W.
• It incorporates as standard a HEPA filter medium that filters solid particles in suspension and can optionally incorporate an ionizer ("Ion Hygenic") that purifies the air through negatively charged particles (anions).
• Micro-switch "ON/OFF" located on the electronic board. Allows to activate/deactivate the heating element.
• Detection of fixed targets. If a static object is detected in front of the sensor, the hand dryer automatically stops at 3-5 seconds as a safety measure.
• Automatic safety cut-out. After 30 seconds of continuous use the device switches off automatically.
• The Speedflow® Plus line of hand dryers is categorized within the eco-fast range of product but with the added value of complying with the requirements of ADAAG for accessibility of public washrooms. This regulation requires that the depth of the dryer cannot exceed 100 mm to facilitate access and movement to people with disabilities inside the washroom.
• The new Speedflow® Plus hand dryer is especially suitable for places with a high traffic frequency such as airports, shopping centers, sports facilities, etc.
• Energy efficient, this hand dryer presents very low power consumption. With a maximum power of 850 W, this hand dryer, depending on the configuration applied, consumes only between 0.6 and 2.8 watts per drying cycle and 0.4 W in stand-by mode, one of the lowest energy consumption in the market.
• Fast (maximum air speed 400 km / h) and quiet (57-65 dBA). Dries hands in only 12 seconds.
• Adjustable power motor to regulate power consumption between 180 and 850 W.
• It incorporates as standard a HEPA filter medium that filters solid particles in suspension and can optionally incorporate an ionizer ("Ion Hygenic") that purifies the air through negatively charged particles (anions).
• Micro-switch "ON/OFF" located on the electronic board. Allows to activate/deactivate the heating element.
• Detection of fixed targets. If a static object is detected in front of the sensor, the hand dryer automatically stops at 3-5 seconds as a safety measure.
• Automatic safety cut-out. After 30 seconds of continuous use the device switches off automatically.
Elektriisolatsioon klass II
Voolutarve 12A
Kuivatuseag 29 sek
Koguvõimsus 2750W
Kaitseklass IP23
Müratase 65dB (2 m kaugusel)
Moeks disain,keskmise hinnaklass,suurepärane tasakaal ja valikus.
-Optimaalne jõudluse ja energiakulu suhe
-Sensoriga toimiv
-Hooldusvaba
-Ülikaine (ainult 57dB) ja ergonoomiline
-Reguleeritav tuvastuskaugus (5-25cm)
-Ideaalne tulemuse ja hinna tasakaal
Kuivatuseaeg on 30-40 sek
Mediclinics Kätekuivati Saniflow 05 ,surunupuga, roostevaba teras poleeritud
Saniflow® push-button hand dryer
As part of this wide range of dryers, these are manufactured using a variety of materials and finishes, with different functionalities to be used in any public washroom environment. Automatic and manually operated models, with weld free casing available in a wide variety of materials and finishes, product references granting Saniflow® dryers a proven versatility.
Also, Mediclinics offers the Saniflow® line recessed mounting kit, a solution that was developed for installing this family of hand dryers inside a metal cabinet, in compliance with standard ADA/UNE for eliminating architectural barriers in washrooms.
It is worth mentioning that thanks to their long trajectory and presence, these hand dryers have become a reference nationally and internationally. Some of the characteristics that have made this model unique are its great power and air flow, its 360º rotating nozzle of exclusive design, its internal components for minimizing noise and vibrations and its anti-vandalism features.
Saniflow® dryers are made according to the highest quality and safety standards: Includes a thermal cut off, automatic disconnect system, safety screws and special key opener.
Thus, these are proven models with a long durability and complete reliability, with anti-vandalism features and designed to be installed in high traffic of people such as airports, large hotels, sport centres, large recreational areas and large official organizations, among others.
Elektroisolatsioon klass 1
Kaal 3,8 kg
Voolutarve 1,3-4,8 A
Koguvõimsus 1010W-1150W
Kaitseklass IP23
Müratase 58-68dB(2m kaugusel)
Kuivatusaeg 10-15 sek.
• Towel rail made of AISI 304 stainless steel diameter 9.8 mm bar, bright finish, for wall mounting.
• Stainless steel AISI 304 arms, 0.8 mm thick, bright finish.
• With smooth clean lines to suit modern bathrooms, this towel rail is suitable for the hotel sector, for fitting out the bathrooms in the hotel rooms.
• Stainless steel construction ensures durability and rust proof.
• With no removable components.
• It normally goes along with a stainless steel soap dispenser and a hand dryer.
• Means by brick wall mounting are supplied.
• Double towel rail made of AISI 304 stainless steel with bars diameter 8mm and 0.8mm thick, satin finish, for mounting on the wall.
• Stainless steel AISI 304 arms, diameter 18mm and 0.8mm thick, satin finish.
• With smooth clean lines to suit modern bathrooms, this double towel rail is suitable for the hotel sector, for fitting out the bathrooms in the hotel rooms.
• Stainless steel construction ensures durability and rust proof.
• With no removable components.
• It normally goes along with a stainless steel soap dispenser and a hand dryer.
• Screws and plugs for installation to a brick wall are provided.
• Surface-mounted retractable clothesline bright finish, made of AISI 304 stainless steel.
• The AISI 304 stainless steel construction protects the product against rust and ensures quality and longevity.
• Unit has a button retainer and a 2,100 mm Nylon cord.
• Equipped with locking device to keep cord from sagging when in use. When center locking knob is released, unit shall retract automatically by spring-actuated reel.
• Model suitable for the hotel sector, elderly centers, homes and for collectivities.
• Washroom shelf made of AISI 304 stainless steel bright finish, for wall mounting.
• With smooth clean lines to suit modern bathrooms, this shelf is suitable for the hotel sector, for fitting out the bathrooms in the hotel rooms.
• Stainless steel construction ensures durability and rust proof.
• With no removable components.
• It normally goes along with a stainless steel towel rail or towel ring.
• Mounting on the wall by means of two supplied screws.
128,00 €
• Washroom shelf made of AISI 304 stainless steel, bright finish, for wall mounting.
• The AISI 304 stainless steel construction protects the product against rust and ensures quality and longevity.
• Model suitable for the hotel sector and for collectivities.
• Shelf made of AISI 304 solid stainless steel plate, 0.8 mm thick with roll-formed edges.
• Flange and posts made of AISI 304 stainless steel, 0.8 mm thick.
• Towel bar composed by one-piece curved AISI 304 stainless steel tube, diameter 6 mm, 0.8 mm thick.
• Concealed screws design.
• Screws and plugs for installation to the wall are provided.
• Trapezoidal towel ring, bright finish and made of AISI 304 stainless steel , for wall mounting.
• The AISI 304 stainless steel construction protects the product against rust and ensures quality and longevity.
• Model suitable for the hotel sector and for collectivities.
• Concealed screws design.
• Screws and plugs for installation to the wall are provided.
• Soap dish, bright finish and made of AISI 304 stainless steel , for wall mounting.
• The AISI 304 stainless steel construction protects the product against rust and ensures quality and longevity.
• Model suitable for the hotel sector and for collectivities.
• Two drain holes and two ridges to support bar of soap.
• Concealed screws design.
• Screws and plugs for installation to the wall are provided.
• Surface mounted dual roll toilet tissue dispenser with cover, bright finish, made of AISI 304 stainless steel.
• The AISI 304 stainless steel construction protects the product against rust and ensures quality and longevity.
• Housing made of AISI 304 stainless steel, 0.8 mm thick. Drawn, one-piece, seamless construction.
• Covers made of AISI 304 stainless steel, 1.2 mm thick.
• Chrome-plated plastic spindles hold rolls up to130mm diameter, made of chrome-plated plastic and equipped with an inner heavy-duty spring.
• Model suitable for the hotel sector and for collectivities.
• Screws and plugs for installation to the wall are provided.
• Recessed mounted dual roll toilet tissue dispenser with cover, bright finish, made of AISI 304 stainless steel.
• The AISI 304 stainless steel construction protects the product against rust and ensures quality and longevity.
• Housing made of AISI 304 stainless steel, 0.8 mm thick. Drawn, one-piece, seamless construction.
• Covers made of AISI 304 stainless steel, 1.2 mm thick.
• Chrome-plated plastic spindles hold rolls up to130mm diameter, made of chrome-plated plastic and equipped with an inner heavy-duty spring.
• Model suitable for the hotel sector and for collectivities.
• Screws and plugs for installation to the wall are provided.
STAINLESS STEEL TOILET ROLL HOLDER
Surface mounted single roll toilet tissue dispenser with cover, made of AISI 304 stainless steel, bright finish
• Surface mounted single roll toilet tissue dispenser with cover, bright finish, made of AISI 304 stainless steel.
• The AISI 304 stainless steel construction protects the product against rust and ensures quality and longevity.
• Housing made of AISI 304 stainless steel, 0.8 mm thick. Drawn, one-piece, seamless construction.
• Cover made of AISI 304 stainless steel, 1.2 mm thick.
• Chrome-plated plastic spindle holds rolls up to130mm diameter, made of chrome-plated plastic and equipped with an inner heavy-duty spring.
• Model suitable for the hotel sector and for collectivities.
• Screws and plugs for installation to the wall are provided.
• Surface mounted toilet tissue dispenser with cover, bright finish, made of AISI 304 stainless steel .
• The AISI 304 stainless steel construction protects the product against rust and ensures quality and longevity.
• White plastic spindle holds rolls up to130 mm diameter and it is equipped with an inner heavy-duty spring.
• Model suitable for the hotel sector, elderly centers, homes and for collectivities.
• Screws and plugs for installation to the wall are provided.
• Surface mounted single roll toilet tissue dispenser, bright finish, made of AISI 304 stainless steel .
• The AISI 304 stainless steel construction protects the product against rust and ensures quality and longevity.
• Chrome-plated plastic spindle holds rolls up to130mm diameter.
• Model suitable for the hotel sector, elderly centers, homes and for collectivities.
• Screws and plugs for installation to the wall are provided.
