D Line Uksekoputi D line FAT RST AISI 316 - messing 179011P3000

Uksekoputi D line FAT RST AISI 316 - messing

Ø35mm (1.3") tube + 140 x 140 x 47mm (5.5" + 5.5" + 1.9")

Center - center (screw holes): 105 mm (4.1") 

Koos Briti disaineri Tom Dixoniga oleme loonud FAT, uue rida kinnituskonstruktsioone.

Meie Fat uksekoputaja on vastupidavalt valmistatud AISI 316 roostevabast terasest, mida eelistab d line, ning sellele lisandub 20-aastane tootegarantii.

Fat kollektsioon hõlmab hooba, võtitaskut ja pöidla käändkangi, samuti uksekoputajat, tõmbekäepidet, süvendtõmmitsat ja uksetoppi. Nagu kogu d line portfellis, on iga tükk piisavalt minimalistlik, et olla oma kujunduses ajatu, selle ilu tuleneb ümarast profiilist ja täidlasest siluetist, mitte liigsetest detailidest.

Kollektsiooni esteetika saavutamiseks on Tom Dixon suurendanud iga tüki "tavalist" esteetikat, et luua pehmemad servad ja heldem profiil. Stuudio kasutab sõna "fat" helduse ja vormi pehmuse tähistamiseks. Tulemus ei sisalda teravuse või nurksuse jälgegi ning see on kollektsioon ülespuhutud tükkidest, mis on lihtsalt "paksud" tavalisest.

Kollektsioon on saadaval PVD-kivisöe, elektrisinise, PVD-poleeritud messingi ja meie allkirja järgi satiinroostevabast terasest.

Together with British designer Tom Dixon we’ve created FAT, a new line of hardware pieces.

Our Fat door knocker is enduringly crafted in the highly resilient AISI 316 stainless steel preferred by d line and enhanced by a 20-year product guarantee.

The Fat collection comprises a lever handle, key escutcheon and thumb turn, as well as a door knocker, pull handle, flush pull and door stop. Like the rest of the d line portfolio, each piece is minimalist enough to be timeless in its design, its beauty coming from its rounded profile and inflated silhouette, rather than from superfluous details. 

To achieve the collection’s aesthetic, Tom Dixon has magnified the silhouette of each piece’s ‘normal’ aesthetic, to create softer edges and a generous profile. The studio uses the word ‘fat’ to imply generosity and softness of form. The result lacks any trace of sharpness or angularity and is a collection of pumped-up pieces that are simply ‘fatter’ than the norm.

The collection is available in PVD charcoal, electric blue, PVD polished brass and our signature satin stainless steel. 

Lukusüdamiku kate ELEMENT 3002 d50mm harjatud Frost A3002B

Lukusüdamiku kate ELEMENT 3002 d50mm harjatud kuld A3002BMG

Lukusüdamiku kate ELEMENT 3002 d50mm harjatud vask Frost A3002BOC

Lukusüdamiku kate ELEMENT 3002 d50mm kuld Frost A3002GO

Lukusüdamiku kate ELEMENT 3002 d50mm must Frost A3002BL

Lukusüdamiku kate ELEMENT 3002 d50mm poleeritud Frost A3002P

Lukusüdamiku kate ELEMENT 3002 d50mm vask Frost A3002C

Ukse lukukate (välimine) D Line FAT AISI 316 Ø70mm roostevaba must 129005P4

Ukse lukukate (välimine) D Line FAT AISI 316 Ø70mm roostevaba must

Ø70 mm

Height: * mm 

Center - center distance (between screw fixings): 30 mm

Together with British designer Tom Dixon we’ve created FAT, a new line of hardware pieces.

Our Ø70mm Fat external escutcheon f/PZ cylinder hole for the outside of an exterior door (ie. a front door), is enduringly crafted in the highly resilient AISI 316 stainless steel preferred by d line and enhanced by a 20-year product guarantee.

The Fat collection comprises a lever handle, key escutcheon and thumb turn, as well as a door knocker, pull handle, flush pull and door stop. Like the rest of the d line portfolio, each piece is minimalist enough to be timeless in its design, its beauty coming from its rounded profile and inflated silhouette, rather than from superfluous details. 

Tom Dixon uses the word ‘fat’ to imply generosity and softness of form. The result lacks any trace of sharpness or angularity and is a collection of pumped-up pieces that are simply ‘fatter’ than the norm.

The collection is available in charcoal, electric blue, polished brass and our signature satin stainless steel. 

To achieve the collection’s aesthetic, Tom Dixon has magnified the silhouette of each piece’s ‘normal’ aesthetic. That’s why the diameter of our Fat lever roses and escutcheons are Ø70mm. This means, that our Fat lever handle, escutcheons and thumb turns will match lock cases where the backset minus the rebate is a minimum of 40mm. The center distance between the lever handle and escutcheon/thumb turn should also be a minimum of 71mm. For further information, please contact us. 

Ukse lukukate (välimine) D Line FAT AISI 316 Ø70mm roostevaba teras

Ukse lukukate (välimine) D Line FAT AISI 316 Ø70mm roostevaba teras

Ø70 mm

Height: * mm 

Center - center distance (between screw fixings): 30 mm

Together with British designer Tom Dixon we’ve created FAT, a new line of hardware pieces.

Our Ø70mm Fat external escutcheon f/PZ cylinder hole for the outside of an exterior door (ie. a front door), is enduringly crafted in the highly resilient AISI 316 stainless steel preferred by d line and enhanced by a 20-year product guarantee.

The Fat collection comprises a lever handle, key escutcheon and thumb turn, as well as a door knocker, pull handle, flush pull and door stop. Like the rest of the d line portfolio, each piece is minimalist enough to be timeless in its design, its beauty coming from its rounded profile and inflated silhouette, rather than from superfluous details. 

Tom Dixon uses the word ‘fat’ to imply generosity and softness of form. The result lacks any trace of sharpness or angularity and is a collection of pumped-up pieces that are simply ‘fatter’ than the norm.

The collection is available in charcoal, electric blue, polished brass and our signature satin stainless steel. 

To achieve the collection’s aesthetic, Tom Dixon has magnified the silhouette of each piece’s ‘normal’ aesthetic. That’s why the diameter of our Fat lever roses and escutcheons are Ø70mm. This means, that our Fat lever handle, escutcheons and thumb turns will match lock cases where the backset minus the rebate is a minimum of 40mm. The center distance between the lever handle and escutcheon/thumb turn should also be a minimum of 71mm. For further information, please contact us. 

Ukse lukukate (väline) D Line FAT AISI 316 Ø70mm roostevaba electric blue 179005F1

Ukse lukukate (väline) D Line FAT AISI 316 Ø70mm roostevaba electric blue

Ø70 mm

Height: * mm 

Center - center distance (between screw fixings): 30 mm

Together with British designer Tom Dixon we’ve created FAT, a new line of hardware pieces.

Our Ø70mm Fat external escutcheon f/PZ cylinder hole for the outside of an exterior door (ie. a front door), is enduringly crafted in the highly resilient AISI 316 stainless steel preferred by d line and enhanced by a 20-year product guarantee.

The Fat collection comprises a lever handle, key escutcheon and thumb turn, as well as a door knocker, pull handle, flush pull and door stop. Like the rest of the d line portfolio, each piece is minimalist enough to be timeless in its design, its beauty coming from its rounded profile and inflated silhouette, rather than from superfluous details. 

Tom Dixon uses the word ‘fat’ to imply generosity and softness of form. The result lacks any trace of sharpness or angularity and is a collection of pumped-up pieces that are simply ‘fatter’ than the norm.

The collection is available in charcoal, electric blue, polished brass and our signature satin stainless steel. 

To achieve the collection’s aesthetic, Tom Dixon has magnified the silhouette of each piece’s ‘normal’ aesthetic. That’s why the diameter of our Fat lever roses and escutcheons are Ø70mm. This means, that our Fat lever handle, escutcheons and thumb turns will match lock cases where the backset minus the rebate is a minimum of 40mm. The center distance between the lever handle and escutcheon/thumb turn should also be a minimum of 71mm. For further information, please contact us. 

Ukse lukukate (väline) D Line FAT AISI 316 Ø70mm roostevaba teras messing 15900501

Ukse lukukate (väline) D Line FAT AISI 316 Ø70mm roostevaba teras messing

Ø70 mm

Height: * mm 

Center - center distance (between screw fixings): 30 mm

Together with British designer Tom Dixon we’ve created FAT, a new line of hardware pieces.

Our Ø70mm Fat external escutcheon f/PZ cylinder hole for the outside of an exterior door (ie. a front door), is enduringly crafted in the highly resilient AISI 316 stainless steel preferred by d line and enhanced by a 20-year product guarantee.

The Fat collection comprises a lever handle, key escutcheon and thumb turn, as well as a door knocker, pull handle, flush pull and door stop. Like the rest of the d line portfolio, each piece is minimalist enough to be timeless in its design, its beauty coming from its rounded profile and inflated silhouette, rather than from superfluous details. 

Tom Dixon uses the word ‘fat’ to imply generosity and softness of form. The result lacks any trace of sharpness or angularity and is a collection of pumped-up pieces that are simply ‘fatter’ than the norm.

The collection is available in charcoal, electric blue, polished brass and our signature satin stainless steel. 

To achieve the collection’s aesthetic, Tom Dixon has magnified the silhouette of each piece’s ‘normal’ aesthetic. That’s why the diameter of our Fat lever roses and escutcheons are Ø70mm. This means, that our Fat lever handle, escutcheons and thumb turns will match lock cases where the backset minus the rebate is a minimum of 40mm. The center distance between the lever handle and escutcheon/thumb turn should also be a minimum of 71mm. For further information, please contact us. 

Ukse lukukate 6mm (sisemine) D Line FAT AISI 316 Ø70mm roostevaba electric blue 179003F1060

Ukse lukukate 6mm (sisemine) D Line FAT AISI 316 Ø70mm roostevaba electric blue

Ø70 mm (2,7")

Height: 6 mm (0,2")

Center - center distance (between screw fixings): 38/27 mm (1,5"/1")

Together with British designer Tom Dixon we’ve created FAT, a new line of hardware pieces.

Our Ø70mm Fat escutcheon w/PZ hole for the inside of an exterior door (ie. a front door),  is enduringly crafted in the highly resilient AISI 316 stainless steel preferred by d line and enhanced by a 20-year product guarantee.

The Fat collection comprises a lever handle, key escutcheon and thumb turn, as well as a door knocker, pull handle, flush pull and door stop. Like the rest of the d line portfolio, each piece is minimalist enough to be timeless in its design, its beauty coming from its rounded profile and inflated silhouette, rather than from superfluous details. 

Tom Dixon uses the word ‘fat’ to imply generosity and softness of form. The result lacks any trace of sharpness or angularity and is a collection of pumped-up pieces that are simply ‘fatter’ than the norm.

The collection is available in charcoal, electric blue, polished brass and our signature satin stainless steel. 

To achieve the collection’s aesthetic, Tom Dixon has magnified the silhouette of each piece’s ‘normal’ aesthetic. That’s why the diameter of our Fat lever roses and escutcheons are Ø70mm. This means, that our Fat lever handle, escutcheons and thumb turns will match lock cases where the backset minus the rebate is a minimum of 40mm. The center distance between the lever handle and escutcheon/thumb turn should also be a minimum of 71mm. For further information, please contact us. 

Ukse lukukate 6mm (sisemine) D Line FAT AISI 316 Ø70mm roostevaba messing 179003P3060

Ukse lukukate 6mm (sisemine) D Line FAT AISI 316 Ø70mm roostevaba messing

Ø70 mm (2,7")

Height: 6 mm (0,2")

Center - center distance (between screw fixings): 38/27 mm (1,5"/1")

Together with British designer Tom Dixon we’ve created FAT, a new line of hardware pieces.

Our Ø70mm Fat escutcheon w/PZ hole for the inside of an exterior door (ie. a front door),  is enduringly crafted in the highly resilient AISI 316 stainless steel preferred by d line and enhanced by a 20-year product guarantee.

The Fat collection comprises a lever handle, key escutcheon and thumb turn, as well as a door knocker, pull handle, flush pull and door stop. Like the rest of the d line portfolio, each piece is minimalist enough to be timeless in its design, its beauty coming from its rounded profile and inflated silhouette, rather than from superfluous details. 

Tom Dixon uses the word ‘fat’ to imply generosity and softness of form. The result lacks any trace of sharpness or angularity and is a collection of pumped-up pieces that are simply ‘fatter’ than the norm.

The collection is available in charcoal, electric blue, polished brass and our signature satin stainless steel. 

To achieve the collection’s aesthetic, Tom Dixon has magnified the silhouette of each piece’s ‘normal’ aesthetic. That’s why the diameter of our Fat lever roses and escutcheons are Ø70mm. This means, that our Fat lever handle, escutcheons and thumb turns will match lock cases where the backset minus the rebate is a minimum of 40mm. The center distance between the lever handle and escutcheon/thumb turn should also be a minimum of 71mm. For further information, please contact us. 

Ukse lukukate 6mm (sisemine) D Line FAT AISI 316 Ø70mm roostevaba must 129003P4060

Ukse lukukate 6mm (sisemine) D Line FAT AISI 316 Ø70mm roostevaba must

Ø70 mm (2,7")

Height: 6 mm (0,2")

Center - center distance (between screw fixings): 38/27 mm (1,5"/1")

Together with British designer Tom Dixon we’ve created FAT, a new line of hardware pieces.

Our Ø70mm Fat escutcheon w/PZ hole for the inside of an exterior door (ie. a front door),  is enduringly crafted in the highly resilient AISI 316 stainless steel preferred by d line and enhanced by a 20-year product guarantee.

The Fat collection comprises a lever handle, key escutcheon and thumb turn, as well as a door knocker, pull handle, flush pull and door stop. Like the rest of the d line portfolio, each piece is minimalist enough to be timeless in its design, its beauty coming from its rounded profile and inflated silhouette, rather than from superfluous details. 

Tom Dixon uses the word ‘fat’ to imply generosity and softness of form. The result lacks any trace of sharpness or angularity and is a collection of pumped-up pieces that are simply ‘fatter’ than the norm.

The collection is available in charcoal, electric blue, polished brass and our signature satin stainless steel. 

To achieve the collection’s aesthetic, Tom Dixon has magnified the silhouette of each piece’s ‘normal’ aesthetic. That’s why the diameter of our Fat lever roses and escutcheons are Ø70mm. This means, that our Fat lever handle, escutcheons and thumb turns will match lock cases where the backset minus the rebate is a minimum of 40mm. The center distance between the lever handle and escutcheon/thumb turn should also be a minimum of 71mm. For further information, please contact us. 

Ukse lukukate 6mm (sisemine) D Line FAT AISI 316 Ø70mm roostevaba teras 12900302060

Ukse lukukate 6mm (sisemine) D Line FAT AISI 316 Ø70mm roostevaba teras

Ø70 mm (2,7")

Height: 6 mm (0,2")

Center - center distance (between screw fixings): 38/27 mm (1,5"/1")

Together with British designer Tom Dixon we’ve created FAT, a new line of hardware pieces.

Our Ø70mm Fat escutcheon w/PZ hole for the inside of an exterior door (ie. a front door),  is enduringly crafted in the highly resilient AISI 316 stainless steel preferred by d line and enhanced by a 20-year product guarantee.

The Fat collection comprises a lever handle, key escutcheon and thumb turn, as well as a door knocker, pull handle, flush pull and door stop. Like the rest of the d line portfolio, each piece is minimalist enough to be timeless in its design, its beauty coming from its rounded profile and inflated silhouette, rather than from superfluous details. 

Tom Dixon uses the word ‘fat’ to imply generosity and softness of form. The result lacks any trace of sharpness or angularity and is a collection of pumped-up pieces that are simply ‘fatter’ than the norm.

The collection is available in charcoal, electric blue, polished brass and our signature satin stainless steel. 

To achieve the collection’s aesthetic, Tom Dixon has magnified the silhouette of each piece’s ‘normal’ aesthetic. That’s why the diameter of our Fat lever roses and escutcheons are Ø70mm. This means, that our Fat lever handle, escutcheons and thumb turns will match lock cases where the backset minus the rebate is a minimum of 40mm. The center distance between the lever handle and escutcheon/thumb turn should also be a minimum of 71mm. For further information, please contact us. 

Ukse lukukate 8mm (sisemine) D Line FAT AISI 316 Ø70mm roostevaba electric blue 179003F1080

Ukse lukukate 8mm (sisemine) D Line FAT AISI 316 Ø70mm roostevaba electric blue

Ø70 mm (2,7")

Height: 8 mm (0,2")

Center - center distance (between screw fixings): 38/27 mm (1,5"/1")

Together with British designer Tom Dixon we’ve created FAT, a new line of hardware pieces.

Our Ø70mm Fat escutcheon w/PZ hole for the inside of an exterior door (ie. a front door),  is enduringly crafted in the highly resilient AISI 316 stainless steel preferred by d line and enhanced by a 20-year product guarantee.

The Fat collection comprises a lever handle, key escutcheon and thumb turn, as well as a door knocker, pull handle, flush pull and door stop. Like the rest of the d line portfolio, each piece is minimalist enough to be timeless in its design, its beauty coming from its rounded profile and inflated silhouette, rather than from superfluous details. 

Tom Dixon uses the word ‘fat’ to imply generosity and softness of form. The result lacks any trace of sharpness or angularity and is a collection of pumped-up pieces that are simply ‘fatter’ than the norm.

The collection is available in charcoal, electric blue, polished brass and our signature satin stainless steel. 

To achieve the collection’s aesthetic, Tom Dixon has magnified the silhouette of each piece’s ‘normal’ aesthetic. That’s why the diameter of our Fat lever roses and escutcheons are Ø70mm. This means, that our Fat lever handle, escutcheons and thumb turns will match lock cases where the backset minus the rebate is a minimum of 40mm. The center distance between the lever handle and escutcheon/thumb turn should also be a minimum of 71mm. For further information, please contact us.