Komplekt KOOLI WC roostevaba teras harjatud
❓ Otsid õiget toodet, kuid ei ole kindel, mis sobib?
PEGU.ee aitab valida – räägi otse eksperdiga, kellel on 25+ aastat kogemust segistite, dušisüsteemide ja aksessuaaride alal.
Küsi nõu
Kroom FMM-nr:1641-0000
- Temperatuuriseade nupuga, akutoitel (aku kaasas)
- Vandalismikindel, kest üleni metallist
- ECO funktsioon (vett ja energiat säästev õhusti 5 l/min)
- Aegreleega loputuse lõpetus üleujutamise vältimiseks
- 30-sekundiline loputusaeg (anduriga)
- Võimalik välja lülitada 60 sekundiks (näiteks puhastamiseks)
- Madal voolutarve, pikk eluiga
- Võimalik kuuma veega läbi loputada, et desinfitseerida legionella vastu
- IP-klassi andur, IP67
- Keskkonnasõbralik materjal, pliivaba, niklivaba
Paigaldamine: - Anduri automaatne kalibreering
- Pärast seadistamist sobivale temperatuurile, on võimalik nupp asendada ehiskaanega
- Kõiki mudeleid on võimalik kasutada nii 6V aku toitel või 12V vooluadapteriga
- Võrguvoolu kasutamiseks on tarvis paigaldada vooluadapter 1623-0000 ja toide FMM 1619-4000 või teise võimalusena trafo FMM 1619-3000
- Pehmed PEX® voolikud koos integreeritud tagasilöögiklappide ja filtritega (roostevabast terasest)
- Ava läbimõõt Ø 33,5–37 mm
Seaded: - Reguleeritav maksimaalne temperatuur
- Programmeeritav hügieeniloputuse funktsioon
- Seadistatav loputusaeg
Keskselt juhitav mudel: - Komplektis kaabel, millega on võimalik juhtida hügieeniloputust
- Loputus toimub, kui sissevool on suletud
Damixa Pine valamusegisti Medium harjatud teras PVDPine Medium Basin Mixer |
|
Standard features: 1 handle |
TEMPOMATIC MIX 2 electronic mixer
Ref. 494006
Deck-mounted electronic basin mixer:
Independent IP65 electronic control unit.
Battery-operated with 123 6V Lithium batteries.
Flow rate pre-set at 4 lpm at 3 bar, can be adjusted from 1.5 - 6 lpm.
Scale-resistant flow straightener.
Adjustable duty flush (pre-set flush ~60 seconds every 24 hours after last use).
Shock-resistant infrared presence detection sensor.
Chrome-plated solid brass body.
PEX flexibles with filters and reduced-stagnation solenoid valves M3/8".
Fixing reinforced by 2 stainless steel rods.
Anti-blocking security.
Side temperature control with standard lever and adjustable maximum temperature limiter.
Solenoid valves are upstream of the mixing chamber.
Suitable for people with reduced mobility.
TECHNICAL FEATURES
TEMPOMATIC MIX 2 electronic mixer
Ref. 494006
| Supply | 6V battery |
|---|---|
| Connector | M3/8" |
| Technology | Electronic |
| Drop height | 125mm |
| Spout length | 145mm |
| Flow rate | 4 lpm |
TEMPOMATIC MIX 3 electronic mixer
Ref. 492006
Deck-mounted electronic basin mixer :
Battery-operated with integrated 223 6V Lithium batteries.
Reduced-stagnation solenoid valve and electronic unit integrated into the body of the mixer.
Flow rate pre-set at 3 lpm at 3 bar, can be adjusted from 1.5 - 6 lpm.
Scale-resistant flow straightener.
Duty flush (~60 seconds every 24 hours after the last use).
Active, infrared presence detection, sensor at the end of the spout optimises detection.
Chrome-plated solid brass body.
Cap fixed in place by 2 concealed screws, with pictogram to identify sensor easily.
PEX flexibles with stopcocks F3/8", filters and non-return valves.
Fixing reinforced by 2 stainless steel rods.
Anti-blocking security.
Side temperature control lever with adjustable maximum temperature limiter.
Suitable for people with reduced mobility.
TECHNICAL FEATURES
TEMPOMATIC MIX 3 electronic mixer
Ref. 492006
| Supply | 6V battery |
|---|---|
| Connector | F3/8" |
| Technology | Electronic |
| Drop height | 100mm |
| Spout length | 120mm |
| Flow rate | 3 lpm |
TEMPOMATIC MIX 4 electronic mixer
Ref. 490001
230/6V plug-in mains supply.
Reduced-stagnation solenoid valve and electronic unit integrated into the body of the mixer.
Flow rate pre-set at 3 lpm at 3 bar, can be adjusted from 1.5 - 6 lpm.
Scale-resistant flow straightener.
Duty flush (~60 seconds every 24 hours after the last use).
Active infrared presence detection sensor at the end of the spout optimises detection.
Chrome-plated solid brass body.
Cap fixed in place by 2 concealed screws.
PEX flexibles F3/8" with stopcocks, filters and non-return valves.
Fixing reinforced by 2 stainless steel rods.
Anti-blocking security.
Side temperature control lever with adjustable maximum temperature limiter.
TECHNICAL CHARACTERISTICS
TEMPOMATIC MIX 4 electronic mixer
Ref. 490001| Supply | 230/6V plug-in mains supply |
| Connector | F3/8" |
| Technology | Electronic |
| Drop height | 75mm |
| Spout length | 110mm |
| Flow rate | 3 lpm |
TEMPOMATIC MIX 4 electronic mixer
Ref. 490106
Deck-mounted electronic basin mixer:
Battery-operated with integrated 123 6V Lithium batteries.
Reduced-stagnation solenoid valve and electronic unit integrated into the body of the mixer.
Flow rate pre-set at 3 lpm at 3 bar, can be adjusted from 1.5 - 6 lpm.
Scale-resistant flow straightener.
Duty flush (~60 seconds every 24 hours after last use).
Active infrared presence detection, sensor at the end of the spout optimises detection.
Chrome-plated metal body.
Cap fixed in place by 2 concealed screws.
PEX flexibles F3/8" with filters and non-return valves .
Fixing reinforced by two stainless steel rods.
Anti-blocking security.
Side temperature control lever and adjustable maximum temperature limiter.
Suitable for people with reduced mobility.
TECHNICAL FEATURES
TEMPOMATIC MIX 4 electronic mixer
Ref. 490106
| Supply | 6V battery |
|---|---|
| Connector | F3/8" |
| Technology | Electronic |
| Drop height | 75mm |
| Spout length | 110mm |
| Flow rate | 3 lpm |
TEMPOMIX time flow mixer
Ref. 795000
Deck-mounted single control time flow basin mixer:
Soft-touch operation.
Temperature control and operation via the push-button.
Time flow ~7 seconds.
Flow rate pre-set at 3 lpm at 3 bar, can be adjusted from 1.5 - 6 lpm.
Scale-resistant flow straightener.
Chrome-plated solid brass body.
Ergonomic chrome-plated metal push-button.
PEX flexibles with stopcocks F3/8", filters and non-return valves.
Fixing reinforced by 2 stainless steel rods.
Adjustable maximum temperature limiter.
Desinfektandi dosaator Mediclinics 1.5L R-V teras harjatud
250 x 110 x 175 mm
• Spray soap dispenser of 1.5 L capacity, manufactured in stainless steel AISI 304, 0,8 mm thick, to be installed directly on the wall and lever-operated by means of an stainless steel lever.
• Available in four finishes (white, black, bright and satin) these foam soap dispenser models have a functional, robust and trendy design that matches the new range of Mediclinics bathroom accessories. This allows this soap dispenser to blend into any space perfectly.
• Suitable for high traffic facilities and for public use.
• Dispenses liquid disinfectant soaps.
Dušitugi L-kujuline 800x800x70 RST harjatud matt
Horisontaalne nurga käetugi, 3-punkti kinnitus. Toru d 32 mm.
• 90º wall to wall horizontal grab bar for showers, baths and changing rooms, with three anchoring points and with snap flange covers, made with stainless steel tube, folded in an "L" shape at 90º.
• Designed to achieve barrier-free accessibility in bathrooms and public spaces. This grab bar is suitable for specific spaces for the elderly or people with reduced mobility. Model suitable for collectivities.
• Stainless steel gives this bar great durability and great resistance to rust.
• The bar has three snap flange covers that conceal the anchoring screws to the wall and reinforce, even more, the beauty of the product once installed.
• Optionally, these bars can be electrically isolated by installing the Electrical Isolation Kit code KA0020.
• Supplied with all the necessary hardware to fix the bar to a brick wall.
General description
Mediepoxi / Medinox series
BD0700C BD0700CS Bright finish Satin finish
-
90o wall to wall horizontal grab bar for showers, baths and changing rooms, with three anchoring points and with snap flange covers, made with stainless steel tube, folded in an "L" shape at 90o.
-
Designed to achieve barrier-free accessibility in bathrooms and public spaces. This grab bar is suitable for specific spaces for the elderly or people with reduced mobility. Model suitable for collectivities.
-
Stainless steel gives this bar great durability and great resistance to rust.
-
The bar has three snap flange covers that conceal the anchoring screws to the wall and reinforce, even more, the beauty of the product once
installed.
-
Optionally, these bars can be electrically isolated by installing the Electrical Isolation Kit code KA0020.
-
Supplied with all the necessary hardware to fix the bar to a brick wall.
Components and materials
-
BD2700: 90o wall to wall horizontal grab bar with three anchoring points, made with AISI 201 stainless steel tube white finish.
-
BD2700B: 90o wall to wall horizontal grab bar with three anchoring points, made with AISI 201 stainless steel tube matte black finish.
-
BD0700C: 90o wall to wall horizontal grab bar with three anchoring points, made with AISI 304 stainless steel tube bright finish.
-
BD0700CS: 90o wall to wall horizontal grab bar with three anchoring points, made with AISI 304 stainless steel tube satin finish.
-
TUBING: made of stainless steel 32 mm diameter tube, seamless construction. The bending process guarantees the uniformity of the
diameter along the bends.
-
CONCEALED WALL BRACKET: three units made of stainless steel sheet, 3 mm thick and joined to the bar by welding to the ends of the
tube. It has three holes (BD2700 and BD2700B) or two holes (other references), with a diameter of 6.5 mm that allow the fixing of the bar
to the wall.
-
SNAP FLANGE COVER: three units that conceal the installation screws made of 1.5 mm thick polypropylene (BD2700 and BD2700B) or
0.8 mm thick stainless steel (other references).
Töötsükkel 15 sek
Töötsükkel 7 sek
Käetugi 695mm sirge, harjatud R/V teras
Käetugi 695mm sirge
R/V teras AISI304
d 32mm
toru paksus 1,5mm
Pelavajutav äärikukate d 81mm
Käetugi 738mm ületõstetav
R/V teras AISI304 harjatud
d 32mm
toru paksus 1,5mm
Pelavajutav äärikukate d 85mm
Kätekuivati Mediclinics Machflow harjatud rostevaba terasest korpusega AISI304
Turvaline ja võimas mudel.
Mediclinics Machflow® M09ACS on mati viimistlusega roostevabast terasest kätekuivati, mis paistab silma oma energiatõhususe ja kiire kuivatusvõime poolest. See Machflow® mudel on ideaalne suure liiklusega avalikesse ruumidesse, näiteks restoranidesse, kohvikutesse, büroohoonetesse ja muudesse sarnastesse kohtadesse.
Mediclinics Machflow® kätekuivati korpus on disainitud maksimaalse vandalismikindluse tagamiseks. Toode töötab automaatse sensoriga ja kuivatusaeg on vaid 10-15 sekundit. See mudel on populaarne oma kaasaegse disaini ja erinevate pinnaviimistlusvõimaluste tõttu - kuivati on saadaval valges, mustas, poleeritud ja harjatud pinnaviimistluses, sobitudes seeläbi erinevate interjööridega.
Soovitatav paigalduskõrgus on 100-120 cm põrandast. Mediclinics Machflow® kätekuivati on eelkomplekteeritud, mis muudab paigaldamise kiireks ja lihtsaks.
-Ülekiire kuivatusaeg
-Minimaalne Energiakulu
-Minimaalset CO2 heitmeid
-Reguleeritav ülekiire mootor
-Kindel ja kompaktne disain
-GreenSeci nimekirjaar
Kuivatuseaeg on ainult 10-15 sek!!!
Kätepaberidosaator Mediclinics DT2106CS roostevaba teras AISI304 harjatud
Mediclinics DT2106CS on kõige populaarsem kätepaberidosaator Eestis, sobides ideaalselt kasutamiseks avalikes ruumides, nagu koolid, lasteaiad, haiglad, kaubanduskeskused ja kontorid. Elegantne harjatud AISI 304 roostevabast terasest korpus sobib igasse interjööri ning tagab seadme vastupidavuse ja lihtsa hoolduse.
Tehnilised andmed:
-
Materjal: AISI 304 harjatud roostevaba teras
-
Korpuse paksus: 0,8 mm
-
Mõõdud: mahutab C- ja Z-volditud rätikuid mõõtmetega kuni 260x100 mm
-
Mahutavus: 400–600 paberit
-
Kaal: 1,8 kg
Dosaatori kompaktne, kuid mahukas disain võimaldab selle paigaldada ka kitsamatesse ruumidesse, tagades samas pika täitmisvahemiku ja mugava kasutamise.
✅ Tippvalik professionaalidele, kes otsivad vastupidavat ja hügieenilist lahendust.
Vajutava nupuga segisti
Presto
Antiblokeerimise süsteemiga
kroom
15 sek. töötsükkel 3 bar
3-6 l/min
• Surface mounted double robe hook, satin finish, made in AISI 304 stainless steel .
• The AISI 304 stainless steel construction protects the product against rust and ensures quality and longevity.
• Model suitable for the hotel sector, elderly centers, homes and for collectivities.
• Screws and plugs for installation to the wall are provided.
• Double-ended bathroom robe hook, made of AISI 304 stainless steel, from Mediclinics’ Aura series.
• With a versatile and up-to-date air, these bathroom robe hooks combine aesthetics and functionality, making them ideal to decorate elegant and modern bathroom spaces.
• These wall hangers allow you to optimize and keep the bathroom space tidy, making them one of the most essential bathroom accessories.
• Extremely durable thanks to their high-quality, anti-corrosive and highly resistant stainless steel.
• Ideal for bathrooms with high usage such as those in hotels, airports, restaurants, sports complexes, etc.
• Product suitable for public use.
• They have a hidden wall mounting system.
• Includes stainless steel hardware kit for installing on brick walls.
• Double-ended bathroom robe hook, made of AISI 304 stainless steel, from Mediclinics’ Harmonía series.
• With a versatile and up-to-date air, these bathroom robe hooks combine aesthetics and functionality, making them ideal to decorate elegant and modern bathroom spaces.
• Allows you to optimize and keep the bathroom space tidy, making it one of the most essential bathroom accessories.
• Extremely durable thanks to their high-quality, anti- corrosive and highly resistant stainless steel.
• Ideal for bathrooms with high usage such as those of hotels, airports, restaurants, sports complexes, etc.
• Product suitable for public use.
• Hidden wall mounting system.
• Includes stainless steel hardware kit for installation on brick walls.
• Surface mounted single robe hook, satin finish, made of AISI 304 stainless steel .
• The AISI 304 stainless steel construction protects the product against rust and ensures quality and longevity.
• Model suitable for the hotel sector, elderly centers, homes and for collectivities.
• Screws and plugs for installation to a brick wall are supplied.
Nagi oksaga.
harjatud
AISI 304
• Single right-angle bathroom robe hook made of AISI 304 stainless steel, from Mediclinics’ Aura series.
• With an up-to-date and minimalist design, these bathroom robe hooks are ideal for elegant and modern bathroom spaces.
• These wall hangers are extremely durable thanks to their high-quality, anti-corrosive and highly resistant stainless steel.
• They allow you to keep things tidy and save space wherever they are installed, making these hooks some of the most essential bathroom accessories.
• Ideal for bathrooms in hotels, restaurants, hospitals, nursing homes and other public spaces, as well as for your own home.
• Hidden wall mounting system.
• Includes stainless steel hardware kit.
• Single bathroom robe hook for fixing to the bathroom wall, straight-lined and made of AISI 304 stainless steel, from Mediclinics’ Harmonía series.
• The high-quality, anti-corrosive and highly resistant stainless steel makes these wall hangers very high quality and durable.
• As these small but functional bathroom robe hooks come in single units, you can combine as many as you want.
• These bathroom robe hooks are ideal for your own home, as well as for public-use bathrooms such as hotels, restaurants, airports and changing rooms.
• With an up-to-date and minimalist design, these robe hooks are ideal bathroom accessories to add to elegant and modern spaces.
• This robe hook is one of the most essential bathroom accessories for keeping your bathroom tidy and making the most of the space.
• It has a hidden wall mounting system.
• Comes with stainless steel hardware kit.
Prügikast 40l, seinapealne paigaldus
roostevabast terasest poleeritud
kotiraamiga
Open waste receptacle, 40L of capacity, made of stainless steel, satin finish
• Open waste receptacle, 40 L of capacity with inner plastic ring for bag holder. For standing on the floor or wall mounting by means of 4 slot holes drilled on the back of the appliance.
• With an attractive and robust design, this bin is modern and elegant, as well as very resistant and functional.
• Fully welded, with solid corners free of burrs and sharp areas.
• Suitable for bathrooms and in-doors public areas with high traffic of people. Model suitable for public use.
• Wall-mounted option using 4 screws and plugs (not supplied).
Surface automatic liquid soap dispenser
Available in four finishes (white, black, bright and satin) these soap dispenser models have a functional, robust and trendy design that matches the new range of Mediclinics bathroom accessories. This allows this soap dispenser to blend into any space perfectly.
Suitable for high traffic facilities and for public use.
Dispenses liquid soaps with neutral pH, chlorine free and density between 0.9 and 1.35 kg/dm3. Surgical soaps and soaps with solid abrasive particles are not supported.
*R/V teras 0,8 mm, harjatud
*AISI304
*Paigaldusplaat seinale kinnitamiseks
Tualettpaberihoidel JUMBO suur, R/V teras, harjatud
R/V teras AISI304 , max rull d275mm
Surface automatic foam soap dispenser
Available in four finishes (white, black, bright and satin) these soap dispenser models have a functional, robust and trendy design that matches the new range of Mediclinics bathroom accessories. This allows this soap dispenser to blend into any space perfectly.
Suitable for high traffic facilities and for public use.
Dispenses liquid soaps with neutral pH, chlorine free and density between 0.9 and 1.35 kg/dm3. Surgical soaps and soaps with solid abrasive particles are not supported.
Vedelseebidosaator Mediclinics 1.5L R-V teras harjatud
250 x 110 x 175 mm
General Description
-
Liquid soap dispenser of 1.5 L capacity, manufactured in stainless steel AISI 304, 0,8 mm thick, to be installed directly on the wall and lever-operated by means of an stainless steel lever.
-
Available in four finishes (white, black, bright and satin) these soap dispenser models have a functional, robust and trendy design that matches the new range of Mediclinics bathroom accessories. This allows this soap dispenser to blend into any space perfectly.
-
Suitable for high traffic facilities and for public use.
-
Dispenses liquid soaps or hydro-alcoholic gel. Surgical soaps and soaps with solid abrasive particles are not supported.
Components & materials
-
DJP0034: Stainless steel AISI 304, white epoxy finish.
-
DJP0034C: Stainless steel AISI 304, bright finish.
-
DJP0034CS: Stainless steel AISI 304, satin finish.
-
DJP0034B: Stainless steel AISI 304, black epoxy finish.
-
Level display in the front part that constantly indicates the level of soap available inside the soap dispenser.
-
Inner plastic tank that prevents oxidation and that can be easily removed for cleaning and disinfection purposes.
-
Lever made in stainless steel.
-
Anti-drip corrosion resistant valve that dispenses 1.5 ml of soap per service. This anti-drip valve, which dispenses liquid soap, is easily interchangeable with the valves of the other soap dispensers of the same line.
-
Hinged cover for operator convenience and speed of service.
-
Opening on top with provided Mediclinics key that allows soap refill.
-
It is mounted on the wall by means of four Ø4 stainless steel screws (provided) with their corresponding Ø 6mm plastic plugs (also provided).
-
It is recommended to use liquid soaps or disinfectant gel soaps (maximum of alcohol content of 85 %) with a density between 0.9 and 1.35 kg/dm3 and a maximum viscosity of 3,000 cps.
-
Seebidosaator
harjatud
R/V teras AISI 304
1,5L
Vandaalikindel lukuga korpus
