Komplekt KOOLI WC must
❓ Otsid õiget toodet, kuid ei ole kindel, mis sobib?
PEGU.ee aitab valida – räägi otse eksperdiga, kellel on 25+ aastat kogemust segistite, dušisüsteemide ja aksessuaaride alal.
Küsi nõu
Damixa 1702161 valamusegisti Pine matt must
Valamusegisti
- Artikli number 1702161
- Viimistlused Kroom
- Standardfunktsioonid
- Keraamiline tööorgan.
- Põletuskaitsega
- Veesäästu funktsioon Eco-Save.
- Külm start.
- Ilma põhjaklapita.
- Kummiaeraator - lihtne puhastada.
SILHOUET
Touchless Valamusegisti Public matt black
7402061
Matt black
Silhouet
Claus Rantzau
5708516829867
Damixa Pine 1793061 valamusegisti Medium matt must
|
Pine Medium Basin Mixer |
|
1 handle |
Delabie kontaktivaba elektronik segisti 478MCHB M3/8" BINOPTIC MIX 6V matt must
BLACK BINOPTIC MIX electronic mixer
Ref. 478MCHB
Independent IP65 electronic control unit.
123 6V Lithium battery-operated.
Flow rate pre-set at 3 lpm at 3 bar, can be adjusted from 1.4 to 6 lpm.
Scale-resistant flow straightener.
Adjustable duty flush (pre-set flush ~60 seconds. every 24 hours after last use).
Active, infrared presence detection, sensor at the end of the spout optimises detection.
Chrome-plated brass body.
Matte black chrome finish.
PEX flexibles with filters and solenoid valves M3/8".
Fixing reinforced by 2 stainless steel rods.
Anti-blocking safety.
Spout with smooth interior and low volume of water(reduces niches where bacteria can develop).
Side temperature control with standard lever control and adjustable maximum temperature limiter.
Suitable for people with reduced mobility.
TECHNICAL CHARACTERISTICS
BLACK BINOPTIC MIX electronic mixer
Ref. 478MCHB| Supply | 6V batteries |
| Connector | M3/8" |
| Technology | Electronic |
| Drop height | 110mm |
| Spout length | 135mm |
| Flow rate | 3 lpm |
| Finish | Matte black chrome |
Delabie kontaktivaba elektrooniline segisti 378MCHB M3/8" BINOPTIC MIX 230/12V matt must
BLACK BINOPTIC MIX electronic mixer
Ref. 378MCHB
Independent IP65 electronic control unit.
230/12V mains supply with transformer.
Flow rate pre-set at 3 lpm at 3 bar, can be adjusted from 1.4 to 6 lpm.
Scale-resistant flow straightener.
Adjustable duty flush (pre-set flush ~60 seconds every 24 hours after last use).
Active infrared presence detection, sensor at the end of the spout optimises detection.
Chrome-plated brass body.
Matte black chrome finish.
PEX flexibles with filters and solenoid valves M3/8".
Fixing reinforced by 2 stainless steel rods.
Anti-blocking safety.
Spout with smooth interior and low volume of water (reduces niches where bacteria can develop).
Side temperature control with standard lever and adjustable maximum temperature limiter.
Suitable for people with reduced mobility.
TECHNICAL CHARACTERISTICS
BLACK BINOPTIC MIX electronic mixer
Ref. 378MCHB
| Supply | Mains supply 230/12V |
| Connector | M3/8" |
| Technology | Electronic |
| Drop height | 110mm |
| Spout length | 135mm |
| Flow rate | 3 lpm |
| Finish | Matte black chrome |
Desinfektandi dosaator Mediclinics 1.5L R-V teras, epoxy must
250 x 110 x 175 mm
• Spray soap dispenser of 1.5 L capacity, manufactured in stainless steel AISI 304, 0,8 mm thick, to be installed directly on the wall and lever-operated by means of an stainless steel lever.
• Available in four finishes (white, black, bright and satin) these foam soap dispenser models have a functional, robust and trendy design that matches the new range of Mediclinics bathroom accessories. This allows this soap dispenser to blend into any space perfectly.
• Suitable for high traffic facilities and for public use.
• Dispenses liquid disinfectant soaps.
Desoaine spray dosaator Mediclinics sensoriga kontaktivaba 1000ml R/V teras must
SURFACE AUTOMATIC SPRAY SOAP DISPENSER
Automatic wall-mounted spray soap dispenser, made of AISI 304 stainless steel, satin finish
• Automatic wall-mounted spray soap dispenser of 1 L capacity, manufactured in stainless steel AISI 304, 0.8 mm thick.
• Available in four finishes (white, black, bright and satin) these soap dispenser models have a functional, robust and trendy design that matches the new range of Mediclinics bathroom accessories. This allows this soap dispenser to blend into any space perfectly.
• Suitable for high traffic facilities and for public use.
• Level display located in the front part of the soap dispenser. It constantly indicates the level of soap available inside the soap dispenser.
• Operates on 6 AA alkaline batteries (not provided) or optionally, with an AC adapter. Order reference DJS0039A/B/C/CS-TRAFO to receive the automatic soap dispenser able to be connected to the mains with the AC adapter.
• Dispenses hand sanitizer spray.
Dušitugi L-kujuline 800x800x70 matt must
Horisontaalne nurga käetugi, 3-punkti kinnitus. Toru d 32 mm.
• 90º wall to wall horizontal grab bar for showers, baths and changing rooms, with three anchoring points and with snap flange covers, made with stainless steel tube, folded in an "L" shape at 90º.
• Designed to achieve barrier-free accessibility in bathrooms and public spaces. This grab bar is suitable for specific spaces for the elderly or people with reduced mobility. Model suitable for collectivities.
• Stainless steel gives this bar great durability and great resistance to rust.
• The bar has three snap flange covers that conceal the anchoring screws to the wall and reinforce, even more, the beauty of the product once installed.
• Optionally, these bars can be electrically isolated by installing the Electrical Isolation Kit code KA0020.
• Supplied with all the necessary hardware to fix the bar to a brick wall.
General description
Mediepoxi / Medinox series
BD0700C BD0700CS Bright finish Satin finish
-
90o wall to wall horizontal grab bar for showers, baths and changing rooms, with three anchoring points and with snap flange covers, made with stainless steel tube, folded in an "L" shape at 90o.
-
Designed to achieve barrier-free accessibility in bathrooms and public spaces. This grab bar is suitable for specific spaces for the elderly or people with reduced mobility. Model suitable for collectivities.
-
Stainless steel gives this bar great durability and great resistance to rust.
-
The bar has three snap flange covers that conceal the anchoring screws to the wall and reinforce, even more, the beauty of the product once
installed.
-
Optionally, these bars can be electrically isolated by installing the Electrical Isolation Kit code KA0020.
-
Supplied with all the necessary hardware to fix the bar to a brick wall.
Components and materials
-
BD2700: 90o wall to wall horizontal grab bar with three anchoring points, made with AISI 201 stainless steel tube white finish.
-
BD2700B: 90o wall to wall horizontal grab bar with three anchoring points, made with AISI 201 stainless steel tube matte black finish.
-
BD0700C: 90o wall to wall horizontal grab bar with three anchoring points, made with AISI 304 stainless steel tube bright finish.
-
BD0700CS: 90o wall to wall horizontal grab bar with three anchoring points, made with AISI 304 stainless steel tube satin finish.
-
TUBING: made of stainless steel 32 mm diameter tube, seamless construction. The bending process guarantees the uniformity of the
diameter along the bends.
-
CONCEALED WALL BRACKET: three units made of stainless steel sheet, 3 mm thick and joined to the bar by welding to the ends of the
tube. It has three holes (BD2700 and BD2700B) or two holes (other references), with a diameter of 6.5 mm that allow the fixing of the bar
to the wall.
-
SNAP FLANGE COVER: three units that conceal the installation screws made of 1.5 mm thick polypropylene (BD2700 and BD2700B) or
0.8 mm thick stainless steel (other references).
Käetugi 692mm sirge invakäepide must
Käetugi 692mm sirge
teras must epoksükate
d 32mm
toru paksus 1,5mm
Pelavajutav äärikukate d 81mm
• Straight bar with two concealed wall brackets that can be installed both horizontally and vertically made of 32 mm diameter stainless steel tube.
• Simple and elegant in design, this grab bar is suitable for people with reduced mobility, elderly people or the handicapped, especially designed to make their life a little bit easier.
• Grab bar has two snap flange covers that hide the installation screws from the wall, enhancing its beauty once installed.
• Designed to add support and comfort, this bar make the bathroom a much safer place for everyone. Ideal model for both public and private spaces.
• Available in up to six different sizes (depending on the model), this straight bar can be installed in the bathtub, in the shower, the toilet or in the sink.
• Optionally, they have a kit to avoid electrical conductivity Mediclinics code KA0020.
• Supplied with stainless steel hardware to install on brick wall.
Käetugi 738mm ületõstetav
teras must epoksükate
d 32mm
toru paksus 1,5mm
Pelavajutav äärikukate d 85mm
-Ülekiire kuivatusaeg
-Minimaalne Energiakulu
-Minimaalset CO2 heitmeid
-Reguleeritav ülekiire mootor
-Kindel ja kompaktne disain
-GreenSeci nimekirjaar
Kuivatuseaeg on ainult 10-15 sek!!!
Kätepaberidosaator MEDICLINICS DT2106B teras, must
Korpuse paksus 0,8 mm
teras, musta viimistlusega
kaal 1,8 kg
Rätikud max 260x100mm
C/Z volditud rätikute mahutavas 400-600 tk
• Double-ended bathroom robe hook, made of AISI 304 stainless steel, from Mediclinics’ Aura series.
• With a versatile and up-to-date air, these bathroom robe hooks combine aesthetics and functionality, making them ideal to decorate elegant and modern bathroom spaces.
• These wall hangers allow you to optimize and keep the bathroom space tidy, making them one of the most essential bathroom accessories.
• Extremely durable thanks to their high-quality, anti-corrosive and highly resistant stainless steel.
• Ideal for bathrooms with high usage such as those in hotels, airports, restaurants, sports complexes, etc.
• Product suitable for public use.
• They have a hidden wall mounting system.
• Includes stainless steel hardware kit for installing on brick walls.
• Double-ended bathroom robe hook, made of AISI 304 stainless steel, from Mediclinics’ Harmonía series.
• With a versatile and up-to-date air, these bathroom robe hooks combine aesthetics and functionality, making them ideal to decorate elegant and modern bathroom spaces.
• Allows you to optimize and keep the bathroom space tidy, making it one of the most essential bathroom accessories.
• Extremely durable thanks to their high-quality, anti- corrosive and highly resistant stainless steel.
• Ideal for bathrooms with high usage such as those of hotels, airports, restaurants, sports complexes, etc.
• Product suitable for public use.
• Hidden wall mounting system.
• Includes stainless steel hardware kit for installation on brick walls.
• Single right-angle bathroom robe hook made of AISI 304 stainless steel, from Mediclinics’ Aura series.
• With an up-to-date and minimalist design, these bathroom robe hooks are ideal for elegant and modern bathroom spaces.
• These wall hangers are extremely durable thanks to their high-quality, anti-corrosive and highly resistant stainless steel.
• They allow you to keep things tidy and save space wherever they are installed, making these hooks some of the most essential bathroom accessories.
• Ideal for bathrooms in hotels, restaurants, hospitals, nursing homes and other public spaces, as well as for your own home.
• Hidden wall mounting system.
• Includes stainless steel hardware kit.
• Single bathroom robe hook for fixing to the bathroom wall, straight-lined and made of AISI 304 stainless steel, from Mediclinics’ Harmonía series.
• The high-quality, anti-corrosive and highly resistant stainless steel makes these wall hangers very high quality and durable.
• As these small but functional bathroom robe hooks come in single units, you can combine as many as you want.
• These bathroom robe hooks are ideal for your own home, as well as for public-use bathrooms such as hotels, restaurants, airports and changing rooms.
• With an up-to-date and minimalist design, these robe hooks are ideal bathroom accessories to add to elegant and modern spaces.
• This robe hook is one of the most essential bathroom accessories for keeping your bathroom tidy and making the most of the space.
• It has a hidden wall mounting system.
• Comes with stainless steel hardware kit.
Prügikast Mediclinics PP2279B 25l, seinapealne paigaldus, teras must
Prügikast 25l, seinapealne paigaldus
teras must
kotiraamiga
Prügikast 40l, seinapealne paigaldus
teras must
kotiraamiga
40 L CAPACITY OPEN BIN, black FINISH
Open waste receptacle, 40L of capacity, made of steel, black Epoxy finish
Open waste receptacle, 40 L of capacity with inner plastic ring for bag holder. For standing on the floor or wall mounting by means of 4 slot holes drilled on the back of the appliance.
• With an attractive and robust design, this bin is modern and elegant, as well as very resistant and functional.
• Fully welded, with solid corners free of burrs and sharp areas.
• Suitable for bathrooms and in-doors public areas with high traffic of people. Model suitable for public use.
• Wall-mounted option using 4 screws and plugs (not supplied).
Sanprügiurn Mediclinics PP0006B 6L, teras must
Prügikast 6L, seinapealne paigaldus
teras must
*teras 0,8 mm paksus
*must epoksükate
*Paigaldusplaat seinale kinnitamiseks
Teras must epoksükate , max rull d275mm
Valamusegisti Damixa Core Matt Must
KÜSI HINDA PROJEKTILE!
Standard features:
1 handle
Ceramic cartridge
Water consumption max.6 l/min
Damixa Core'iga oleme loonud kõikehõlmava lahenduse ehitusprojektideks, mis rahuldab nii kliendi kui ka lõppkasutaja vajadusi. Lahendus, kus saame märkida kõik keskkonna- ja dokumentatsiooninõuded tööstuses, ja samal ajal täiendada seda esmaklassilise teenindusega.
Core by Damixa räägib kasutajasõbralikku funktsionaalset keelt, millest saavad kõik aru, ja te ei saa midagi ette heita ajatu kinnitusdisainiga, mis on saadaval nii mati mustana kui ka kroomina. Seeria on loomulikult saadaval nii köögi, vanni kui ka duši jaoks ja on seega täielik alates tarnimisest kuni kasutamiseni. Projekti seeria, mis on viimistletud kõige detailideni. Kogu olemus. Lõigatud südamikuni.
