Roostevabast terasest köögisegistid

Roostevabast terasest köögisegistid
Roostevabast terasest köögisegistid ühendavad vastupidavuse, hügieenilisuse ja ajatu välimuse. Tegu on ideaalse valikuga nii professionaalsesse kööki kui ka kodukööki, kus hinnatakse puhtust ja tugevat konstruktsiooni. Meie valikus leiad roostevaba viimistlusega segisteid tuntud tootjatelt nagu Damixa, Vola, Mora ja Hotbath. Sobib suurepäraselt kaasaegsesse, industriaal- või skandinaavia stiilis sisekujundusse.
Suur valik kvaliteetseid segisteid ja vannitoaaksessuaare parimatelt tootjatelt! Santehnika müük soodsa hinnaga ja kiire tarnega. Vajadusel vormistame ka e-arve!
Köögisegisti QTOO stainless steel AISI316 - PVD messing poleeritud
PRODUCT:
Kitchen tap in marine grade stainless steel. Conforms to CSA with min. 500.000 operation cycles securing long life span.
PRODUCT SPECIFICATION
7 7/8”_200mm projection
Swivel spout
Built-in aerator
Total height 11”_280mm
Height to aerator 6 3/32”_155mm
2x 3/8” flexible supply lines
Water flow rate limited to max. 2.2 gpm_8.4 ltr. Marine grade stainless steel AISI316
Lead free compliant
PVD colours:
Satin brass (MP3) - Satin copper (MP2) - Satin Charcoal (MP4) - Polished brass (PP3) - Polished copper (PP2) - Polished Charcoal (PP4)
PRODUCT CARE
d line products are produced in the highest quality stainless steel, marine grade, AISI 316. To sustain the unique d line finish appearance please follow the below instructions: ● Wash down the surfaces using soapy water or mild detergent
● Always thoroughly rinse off with clean water
● To complete the cleaning procedure dry/polish the surfaces with a soft dry cloth
Please do not use scouring powder, steel wool, chloride based detergents or other aggressive cleaning products as these may damage the surface.
If spots or corrosion appear on the surface it is not due to the stainless steel quality, but to impurities in the environment, aggressive conditions or improper or insufficient cleaning
845,87 €
Köögisegisti QTOO stainless steel AISI316 - PVD messing satin
PRODUCT:
Kitchen tap in marine grade stainless steel. Conforms to CSA with min. 500.000 operation cycles securing long life span.
PRODUCT SPECIFICATION
7 7/8”_200mm projection
Swivel spout
Built-in aerator
Total height 11”_280mm
Height to aerator 6 3/32”_155mm
2x 3/8” flexible supply lines
Water flow rate limited to max. 2.2 gpm_8.4 ltr. Marine grade stainless steel AISI316
Lead free compliant
PVD colours:
Satin brass (MP3) - Satin copper (MP2) - Satin Charcoal (MP4) - Polished brass (PP3) - Polished copper (PP2) - Polished Charcoal (PP4)
PRODUCT CARE
d line products are produced in the highest quality stainless steel, marine grade, AISI 316. To sustain the unique d line finish appearance please follow the below instructions: ● Wash down the surfaces using soapy water or mild detergent
● Always thoroughly rinse off with clean water
● To complete the cleaning procedure dry/polish the surfaces with a soft dry cloth
Please do not use scouring powder, steel wool, chloride based detergents or other aggressive cleaning products as these may damage the surface.
If spots or corrosion appear on the surface it is not due to the stainless steel quality, but to impurities in the environment, aggressive conditions or improper or insufficient cleaning
845,87 €
Köögisegisti QTOO stainless steel AISI316 - PVD must poleeritud
PRODUCT:
Kitchen tap in marine grade stainless steel. Conforms to CSA with min. 500.000 operation cycles securing long life span.
PRODUCT SPECIFICATION
7 7/8”_200mm projection
Swivel spout
Built-in aerator
Total height 11”_280mm
Height to aerator 6 3/32”_155mm
2x 3/8” flexible supply lines
Water flow rate limited to max. 2.2 gpm_8.4 ltr. Marine grade stainless steel AISI316
Lead free compliant
PVD colours:
Satin brass (MP3) - Satin copper (MP2) - Satin Charcoal (MP4) - Polished brass (PP3) - Polished copper (PP2) - Polished Charcoal (PP4)
PRODUCT CARE
d line products are produced in the highest quality stainless steel, marine grade, AISI 316. To sustain the unique d line finish appearance please follow the below instructions: ● Wash down the surfaces using soapy water or mild detergent
● Always thoroughly rinse off with clean water
● To complete the cleaning procedure dry/polish the surfaces with a soft dry cloth
Please do not use scouring powder, steel wool, chloride based detergents or other aggressive cleaning products as these may damage the surface.
If spots or corrosion appear on the surface it is not due to the stainless steel quality, but to impurities in the environment, aggressive conditions or improper or insufficient cleaning
845,87 €
Köögisegisti QTOO stainless steel AISI316 - PVD must satiin
PRODUCT:
Kitchen tap in marine grade stainless steel. Conforms to CSA with min. 500.000 operation cycles securing long life span.
PRODUCT SPECIFICATION
7 7/8”_200mm projection
Swivel spout
Built-in aerator
Total height 11”_280mm
Height to aerator 6 3/32”_155mm
2x 3/8” flexible supply lines
Water flow rate limited to max. 2.2 gpm_8.4 ltr. Marine grade stainless steel AISI316
Lead free compliant
PVD colours:
Satin brass (MP3) - Satin copper (MP2) - Satin Charcoal (MP4) - Polished brass (PP3) - Polished copper (PP2) - Polished Charcoal (PP4)
PRODUCT CARE
d line products are produced in the highest quality stainless steel, marine grade, AISI 316. To sustain the unique d line finish appearance please follow the below instructions: ● Wash down the surfaces using soapy water or mild detergent
● Always thoroughly rinse off with clean water
● To complete the cleaning procedure dry/polish the surfaces with a soft dry cloth
Please do not use scouring powder, steel wool, chloride based detergents or other aggressive cleaning products as these may damage the surface.
If spots or corrosion appear on the surface it is not due to the stainless steel quality, but to impurities in the environment, aggressive conditions or improper or insufficient cleaning
845,87 €
Köögisegisti QTOO stainless steel AISI316 - PVD vask poleeritud
PRODUCT:
Kitchen tap in marine grade stainless steel. Conforms to CSA with min. 500.000 operation cycles securing long life span.
PRODUCT SPECIFICATION
7 7/8”_200mm projection
Swivel spout
Built-in aerator
Total height 11”_280mm
Height to aerator 6 3/32”_155mm
2x 3/8” flexible supply lines
Water flow rate limited to max. 2.2 gpm_8.4 ltr. Marine grade stainless steel AISI316
Lead free compliant
PVD colours:
Satin brass (MP3) - Satin copper (MP2) - Satin Charcoal (MP4) - Polished brass (PP3) - Polished copper (PP2) - Polished Charcoal (PP4)
PRODUCT CARE
d line products are produced in the highest quality stainless steel, marine grade, AISI 316. To sustain the unique d line finish appearance please follow the below instructions: ● Wash down the surfaces using soapy water or mild detergent
● Always thoroughly rinse off with clean water
● To complete the cleaning procedure dry/polish the surfaces with a soft dry cloth
Please do not use scouring powder, steel wool, chloride based detergents or other aggressive cleaning products as these may damage the surface.
If spots or corrosion appear on the surface it is not due to the stainless steel quality, but to impurities in the environment, aggressive conditions or improper or insufficient cleaning
845,87 €
Köögisegisti QTOO stainless steel AISI316 - PVD vask satiin
PRODUCT:
Kitchen tap in marine grade stainless steel. Conforms to CSA with min. 500.000 operation cycles securing long life span.
PRODUCT SPECIFICATION
7 7/8”_200mm projection
Swivel spout
Built-in aerator
Total height 11”_280mm
Height to aerator 6 3/32”_155mm
2x 3/8” flexible supply lines
Water flow rate limited to max. 2.2 gpm_8.4 ltr. Marine grade stainless steel AISI316
Lead free compliant
PVD colours:
Satin brass (MP3) - Satin copper (MP2) - Satin Charcoal (MP4) - Polished brass (PP3) - Polished copper (PP2) - Polished Charcoal (PP4)
PRODUCT CARE
d line products are produced in the highest quality stainless steel, marine grade, AISI 316. To sustain the unique d line finish appearance please follow the below instructions: ● Wash down the surfaces using soapy water or mild detergent
● Always thoroughly rinse off with clean water
● To complete the cleaning procedure dry/polish the surfaces with a soft dry cloth
Please do not use scouring powder, steel wool, chloride based detergents or other aggressive cleaning products as these may damage the surface.
If spots or corrosion appear on the surface it is not due to the stainless steel quality, but to impurities in the environment, aggressive conditions or improper or insufficient cleaning
845,87 €
Köögisegisti QTOO stainless steel AISI316 - steel polished
PRODUCT:
Kitchen tap in marine grade stainless steel. Conforms to CSA with min. 500.000 operation cycles securing long life span.
PRODUCT SPECIFICATION
7 7/8”_200mm projection
Swivel spout
Built-in aerator
Total height 11”_280mm
Height to aerator 6 3/32”_155mm
2x 3/8” flexible supply lines
Water flow rate limited to max. 2.2 gpm_8.4 ltr. Marine grade stainless steel AISI316
Lead free compliant
PVD colours:
Satin brass (MP3) - Satin copper (MP2) - Satin Charcoal (MP4) - Polished brass (PP3) - Polished copper (PP2) - Polished Charcoal (PP4)
PRODUCT CARE
d line products are produced in the highest quality stainless steel, marine grade, AISI 316. To sustain the unique d line finish appearance please follow the below instructions: ● Wash down the surfaces using soapy water or mild detergent
● Always thoroughly rinse off with clean water
● To complete the cleaning procedure dry/polish the surfaces with a soft dry cloth
Please do not use scouring powder, steel wool, chloride based detergents or other aggressive cleaning products as these may damage the surface.
If spots or corrosion appear on the surface it is not due to the stainless steel quality, but to impurities in the environment, aggressive conditions or improper or insufficient cleaning
732,00 €
Köögisegisti QTOO stainless steel AISI316 - steel satin
PRODUCT:
Kitchen tap in marine grade stainless steel. Conforms to CSA with min. 500.000 operation cycles securing long life span.
PRODUCT SPECIFICATION
7 7/8”_200mm projection
Swivel spout
Built-in aerator
Total height 11”_280mm
Height to aerator 6 3/32”_155mm
2x 3/8” flexible supply lines
Water flow rate limited to max. 2.2 gpm_8.4 ltr. Marine grade stainless steel AISI316
Lead free compliant
PVD colours:
Satin brass (MP3) - Satin copper (MP2) - Satin Charcoal (MP4) - Polished brass (PP3) - Polished copper (PP2) - Polished Charcoal (PP4)
PRODUCT CARE
d line products are produced in the highest quality stainless steel, marine grade, AISI 316. To sustain the unique d line finish appearance please follow the below instructions: ● Wash down the surfaces using soapy water or mild detergent
● Always thoroughly rinse off with clean water
● To complete the cleaning procedure dry/polish the surfaces with a soft dry cloth
Please do not use scouring powder, steel wool, chloride based detergents or other aggressive cleaning products as these may damage the surface.
If spots or corrosion appear on the surface it is not due to the stainless steel quality, but to impurities in the environment, aggressive conditions or improper or insufficient cleaning
732,00 €
mounting 500, with swivel spout 090H and water saving
aerator. Height 265 mm.
Hole cut out size, mixer: 42 mm.
Hole cut out size, spout: 22 mm.
KV15
Inlet/Outlet: ½".
Hole cut out size, valves: 30 mm.
Hole cut out size, spout: 22 mm.
Süvistatav kangsegisti pööratava 250 mm jooksutoruga
Keskmine käepide
131M
One-handle build-in mixer with ceramic disc technology.131MUP = Mixer 100. 131MAP = Handle NR28M, 250 mm double swivel spout 030, 60 mm circular flanges 001, 3001.
Ada approved.
Kangsegisti keraamilise töörganiga
Kahes suuna pööratava jooksutoruga.
Paigaldusava:42mm, jooksutorule: 22mm
Kangsegisti keraamilise töörganiga
Kahes suuna pööratava jooksutoruga.
Paigaldusava:42mm, jooksutorule: 22mm