Majandus, tööstus santehnika roostevaba teras

Projektide hinnapäringud palume saata e-mailiga: info@pegu.ee
Klientide nõustamine 9.00-19.00, tel.+372 515 0681
KEVAD2022 sisesta sooduskood ostukorvi lehel kupongi lahtrisse!
Нержавеющая большегрузная двойная мойка на ножках, 1200 x 700 x 850 мм
Характеристики
- stainless steel bulk double-sink with a sheating
- without a tap hole (could be made to order)
- possibility of fine plane regulation by the regulation screws on the supporting legs
- possibility to order inner sinks in dimensions: 400 x 300 x 200 mm/ 400 x 400 x 250 mm/ 400 x 400 x 200 mm
- available also in the length 1400 mm
- material CrNi 18/10 (AISI-304)
- brushed finish
- different dimensions could be made to order
Арт. № | 93160 |
Название | SLUN 16 |
automatic washing system for wellingtons with jets - 12V, 50Hz
AMO 01 is a stainless steel automatic washing system for wellingtons with sensor-controlled water nozzles. When stepping into the washing chamber of the system (scanning zone) water starts to flow from the nozzles automatically and wellingtons are cleaned of dirt. Water stops flowing with a certain time delay after the foot has been removed from the scanning zone.
AMO 01 is designed for a single pipe inlet of pre-mixed water from the circulation or water pre-mixed by means of a thermostatic valve.
The AMO 01 automatic washing system is intended mainly for operations with slight shoe contamination where quick washing at maximum water savings is guaranteed.
Package contents
- body of the washing machine
- photocell head
- nozzles – 8 pcs
- electromagnetic valves 2 pcs
- corner valves with filter
- connecting hoses
Radius of sensor | 0 – 0,4 m |
Water inlet | G 1/2“ |
Water pressure | 0,3 – 1,0 MPa |
Outlet | d = 32 mm |
Inner dimensions of the trough | 250 x 400 x 280 mm |
Electricity protection | IP 55 |
Power supply | 12 V, 50 Hz |
Power requirement | 10 VA |
Source of power supply | ZAC 1/20 (max. 2 x AMO 01) |
ZAC 1/50 (max. 5 x AMO 01) | |
Weight | 18 kg |
- Set up water inlet as per picture
- Set up outlet d = 32 mm
- Set up cable for power supply – 12 V, 50 Hz from source of power supply ZAC
automatic washing system for soles with rotary brushes - 230V, 50Hz
RMP 02 is a stainless steel sensor-controlled washing system with rotary brushes for wellingtons. A built-in photocell sensor reacts to the user holding the handrail. The electromagnetic valve switches on, opens the water inlet, the brushes start to rotate and the circular jet injection of the disinfecting lotion is carried out. After placing the foot with the wellington on the grid in between the rotary brushes, the sole is cleaned by means of the horizontal brush. There is a CENTRAL/STOP button on the handrail for emergency switch-off.
The washing system is intended for free standing installation on the floor. Imperfections in the floor are balanced out by four adjustable hobs. The construction of the system allows the outlet to be placed above floor level. Large pieces of dirt are collected by a sieve, which can be easily cleaned. The sieve and brush can be taken out without using a tool.
The RMP 02 washing system, with its easy maintenance, is mainly intended for operations where quick removal of mechanical dirt from wellingtons is required.
The canister with disinfecting solution is not part of the delivery.
Package contents
- body of the washing machine
- removable grid
- electronics with photocell
- rotary brush
- hand brush
- jerican holder
- priming hose
- adjustable supporting legs
- central stop button
Radius of sensor | 0,5 m |
Water inlet | G 1/2“ |
Water pressure | 0,1 – 1,0 MPa |
Outlet | G 6/4” |
Electricity protection | IP 55 |
Power supply | 230 V, 50 Hz |
Power requirement | 370 W |
Water temperature | max. 42°C |
Weight | 41 kg |
- Set up water inlet as per picture
- Set up outlet G 6/4” via effluvial cover
- Set up cable for power supply – 230 V, 50 Hz
RMO 02
automatic washing system for wellingtons
RMO 02 is a stainless steel sensor-controlled washing system with rotary brushes for wellingtons. A built-in photocell sensor reacts to the user holding the handrail. The electromagnetic valve switches on, opens the water inlet, the brushes start to rotate and the circular jet injection of the disinfecting lotion is carried out. After placing the foot with the wellington on the grid in between the rotary brushes, the sole is cleaned by means of the horizontal brush and the leg portion is cleaned by means of two vertical brushes. The system is automatically switched off when the user releases the handrail. There is a CENTRAL/STOP button on the handrail for emergency switch-off.
The washing system is intended for free standing installation on the floor. Imperfections of the floor are balanced out by four adjustable hobs. The construction of the system allows the outlet to be placed above the floor level.
The RMO 02 washing system, with its easy maintenance, is mainly intended for operations where quick removal of mechanical dirt from wellingtons is required.
The canister with disinfecting solution is not part of the delivery.
Package contents
- body of the washing machine
- removable grid
- electronics with photocell
- three rotary brushes
- jerican holder
- priming hose
- adjustable supporting legs
- central stop button
Radius of sensor | 0,7 m |
Water inlet | G 1/2“ |
Water pressure | 0,1 – 1,0 MPa |
Outlet | G 6/4” |
Electricity protection | IP 55 |
Power supply | 230 V, 50 Hz |
Power requirement | 370 W |
Water temperature | max. 42°C |
Weight | 95 kg |
- Set up water inlet as per picture
- Set up outlet G 6/4” via effluvial cover
- Set up cable for power supply – 230 V, 50 Hz
GENOU wall-mounted hand washbasin
Reference: 180330
CCTP description
Wall-mounted, knee-operated hand washbasin.
Bacteriostatic 304 stainless steel. Polished satin finish.
Stainless steel thickness: 1.2mm
Rounded edges prevent injury.
Supplied with swan neck spout and time flow
tap with 7 second time flow.
Supplied with 1 ¼" waste.
Without overflow.
Supplied with fixing elements.
CE marked. Complies with European standard EN 14688.
Weight: 5kg.
Valamu R/V terasest
Garaazi/koristusruumi jaoks
159,00 €
Valamu R/V terasest
Garaazi/koristusruumi jaoks
238,00 €
Valamu R/V terasest
Garaazi/koristusruumi jaoks
245,00 €
Bucket sink in stainless steel for wall mounting. Supplied with stainless steel wall panel, supporting bracket and 3 1/2" x 2" waste with plug and overflow.
192,00 €
Wall hung utility sink in stainless steel. Supplied with fixing brackets.
Wall hung utility sink in stainless steel. Supplied with fixing brackets.
Valamu R/V terasest
Garaazi/koristusruumi jaoks
183,00 €
jöögifontöön
pudelitäitmisekraaniga
Saappaidenpesuallas 7130
Saappaidenpesuallas 7130 on omilla jaloilla seisova allas, joka on suunniteltu käytettäväksi esim. päiväkodeissa kumisaappaiden ja kuravaatteiden huuhteluun sekä teollisuudessa hätäsuihkualtaaksi.
Tuote on kotimainen ruostumattomasta teräksestä valmistettu monikäyttöinen allas. Altaan reunat on pyöristetty turvallisiksi.
Altaan ulkomitat ovat 600x600x350 mm, sisämitat 550x550x250 mm. Allasta valmistetaan myös erikoismitoin.
Altaan mukana toimitetaan pohjaventtiili sekä pohjatulppa helmiketjulla. Altaan jaloissa on säätötassut, joilla se on helppo asentaa suoraan.
Bucket sink in stainless steel for wall mounting. Supplied with stainless steel wall panel, supporting bracket and 3 1/2" x 2" grated waste, and reducer from 2" - 1 1/2".
Bucket sink in stainless steel for wall mounting. Supplied with stainless steel wall panel, supporting bracket and 3 1/2" x 2" grated waste, and reducer from 2" - 1 1/2".
Characteristics
- stainless steel wall hung cleaner‘s sink
- with splash-back and grating
- overflow set
- waste output Ø 50 mm
- material CrNi 18/10 (AISI-304)
- brushed finish
Order number | 98010 |
Code | SLVN 01 |
Характеристики
- stainless steel wall hung cleaner‘s sink
- with splash-back and grating
- overflow set
- waste output Ø 50 mm
- material CrNi 18/10 (AISI-304)
- brushed finish
Арт. № | 98010 |
Название | SLVN 01 |
Liivaeraldusnou Kavika jalgadel 480х330х120 мм
Liiva settimise funktsiooniga drenaažid 7070
Сливы с функцией осаждения песка 7070
Назначение данного слива – препятствовать попаданию песка в канализационную систему. Данный слив устанавливают в моечных помещениях рядом с моечной раковиной, также через слив 7070 пропускают сточный шланг от стиральной машины.
Внутренняя, съемная часть слива служит для осаждения песка и грязи, она легко отделяется и моется. Вода поступает в слив через шланг, устанавливаемый в отверстие крышки слива. Отвод воды осуществляется через сливной патрубок DN32, который присоединяется к канализационному трапу.
Внешние размеры 480х330х120 мм Внутренние размеры 300х280х115 мм
Слив с функцией осаждения песка 7070 изготавливается с ровным плоским дном, что даёт возможность устанавливать его на нижнюю полку стола-мойки, под раковину.
Сливы с функцией осаждения песка 7070/T
Слив с функцией осаждения песка 7070/Т оснащается металлическими ножками, в остальном конструкция аналогична вышеописанной. Ножки имеют регулируемые по высоте опоры, благодаря чему Слив легко устанавливается на неровном полу.
Sand separator basin 7070
The sand separator basin is intended for preventing sand from entering the sewer network. Sand separator basins are used in cleaning cupboards in connection with washbasins.
The detachable inner basin serves as the actual separator basin that is easy to empty.
The supply water pipe is led into the basin through the hole in the cover, and the discharge pipe, DN32, is connected to the floor drain.
Outer dimensions 480x330x120 mm
Inner basin 300x280x115 mm
The sand separator basin 7070 comes with a flat bottom, which makes it possible to place it on the washstand’s lower shelf below the sink.
Sand separator basin 7070/T
The sand separator basin 7070/T is equipped with low legs; in other respects the structure is similar to the model described above. The leg adjustment pads make it easy to place the sand separator basin in a room with a sloping floor.
Liivaeraldusnou Kavika jalgadel 480х330х120 мм
Liiva settimise funktsiooniga drenaažid 7070
Сливы с функцией осаждения песка 7070
Назначение данного слива – препятствовать попаданию песка в канализационную систему. Данный слив устанавливают в моечных помещениях рядом с моечной раковиной, также через слив 7070 пропускают сточный шланг от стиральной машины.
Внутренняя, съемная часть слива служит для осаждения песка и грязи, она легко отделяется и моется. Вода поступает в слив через шланг, устанавливаемый в отверстие крышки слива. Отвод воды осуществляется через сливной патрубок DN32, который присоединяется к канализационному трапу.
Внешние размеры 480х330х120 мм Внутренние размеры 300х280х115 мм
Слив с функцией осаждения песка 7070 изготавливается с ровным плоским дном, что даёт возможность устанавливать его на нижнюю полку стола-мойки, под раковину.
Сливы с функцией осаждения песка 7070/T
Слив с функцией осаждения песка 7070/Т оснащается металлическими ножками, в остальном конструкция аналогична вышеописанной. Ножки имеют регулируемые по высоте опоры, благодаря чему Слив легко устанавливается на неровном полу.
Sand separator basin 7070
The sand separator basin is intended for preventing sand from entering the sewer network. Sand separator basins are used in cleaning cupboards in connection with washbasins.
The detachable inner basin serves as the actual separator basin that is easy to empty.
The supply water pipe is led into the basin through the hole in the cover, and the discharge pipe, DN32, is connected to the floor drain.
Outer dimensions 480x330x120 mm
Inner basin 300x280x115 mm
The sand separator basin 7070 comes with a flat bottom, which makes it possible to place it on the washstand’s lower shelf below the sink.
Sand separator basin 7070/T
The sand separator basin 7070/T is equipped with low legs; in other respects the structure is similar to the model described above. The leg adjustment pads make it easy to place the sand separator basin in a room with a sloping floor.
Overall dimension in mm Ø174 x 235 Inlet dimension in mm 1.5" Outlet dimension in mm 1.5" Material AISI 304 Material thickness in mm 1.5 Gross weight in kg 2.50
Wall hung utility sink in stainless steel. Supplied with fixing brackets.
Utility sink in stainless steel for wall mounting. Including supporting bracket, backstand, taphole right hand side, waste with plug and overflow, screws and plugs.
Utility sink in stainless steel for wall mounting. Including supporting bracket, backstand, taphole right hand side, waste with plug and overflow, screws and plugs.
General description
Fixed mirrors with a frame manufactured of stainless steel AISI 304, 1,0 mm thick.
Mirror manufactured using a first quality glass 5 mm thick and it is backed with a medium density fiber shockabsorbing and waterproof board that reinforces the glass, making it stronger. Model suitable for public use.
Maximum durability and rusting resistance. Components & materials
EP0350CS: 700 x 500 mm fixed mirror, with frame made of stainless steel AISI 304, 1,0 thick and satin finish.
EP0450CS: 800 x 600 mm fixed mirror, with frame made of stainless steel AISI 304, 1,0 thick and satin finish.
FRAME: made of stainless steel AISI 304, 1,0 thick. Unitized all welded construction. Edges and corners are burr free. BACK PART: medium density fiber shock-absorbing and waterproof board, 10 mm thick that reinforces the glass, making it stronger.
GLASS: standard glazing is No 1 quality, 5mm thick. Stainless steel screws for brick walls are included with the mirrors.
Pesurenn konsoolidega 1800mm
360,00 €
Overall dimension in mm Ø300 x 382 Inlet dimension in mm 1.5" Outlet dimension in mm 1.5" Material AISI 304 Material thickness in mm 1.5 Gross weight in kg 7.70
Valamu R/V terasest
Garaazi/avalikude ruumidele