Delabie DOC M Basic dušhi või riietusruumi komplekt valge pulber värv
Kaubamärk:
Ühik: kompl
Tarneaeg: 14-21 päeva
Lisainfo: info@pegu.ee 
KEVAD2022 sisesta sooduskood ostukorvi lehel kupongi lahtrisse!
Basic shower or changing room pack
Ref. 510827MW
DOC M Basic shower or changing room pack.
1 lift-up shower seat with leg, 650 x 420mm. Seat height: 480mm.
1 backrest, depth 125mm.
2 drop-down support rails, length 760mm.
3 grab bars, length 600mm.
Grab bars and shower seat: white powder-coated aluminium.
Drop-down support rails: white powder-coated stainless steel.
Tested to over 200kg. Maximum recommended user weight 135kg.
CE marked.
DOC M compliant.
TECHNICAL FEATURES
Basic shower or changing room pack
Ref. 510827MW
| Depth | Backrest: 125mm; Shower seat: 650mm |
|---|---|
| Length | Grab bars: 600mm; Drop-down support bars: 760mm |
| Finish | White epoxy coated aluminium or stainless steel |
Failid
600mm satii R/V teras
150,00 €
General description
-
Wall-floor grab bar, with three support points, made of a diameter of 32 mm AISI 304 stainless steel tube, bent in an "L" shape at 90o and with a 32mm diameter lateral arm, welded on the lower part of the grab bar and also bent at 90°.
-
With snap flange covers that conceal the installation screws, improving the aesthetics of the bars once installed on the wall.
-
These grab bars offer a great safety and comfort to the user, helping to make the bathroom much safer for the elderly or those with reduced
mobility. Models suitable for public use.
-
Well suited for keeping bathrooms and public enclosures barrier-free.
-
Highest durability and great resistance to rusting.
-
Optionally, these grab bars can be electrically isolated, installing the electrical isolation kit code KA0020.
-
Supplied with plugs and screws to fix the bar to a brick wall.
Components and materials
-
BSD020C: right hand grab bar made of AISI 304 stainless steel tube, bright finish.
-
BSI020C: left hand grab bar made of AISI 304 stainless steel tube, bright finish.
-
BSD020CS: right hand grab bar made of AISI 304 stainless steel tube, satin finish.
-
BSI020CS: left hand grab bar made of AISI 304 stainless steel tube, satin finish.
-
TUBING: made of a 32 mm diameter tube, seamless construction. The bending process guarantees the uniformity of the diameter along the bends.
-
CONCEALED MOUNTING FLANGE: three units made of AISI 304 stainless steel, 3 mm thick. Incorporates two Ø 6.5 mm screw holes for wall mounting.
-
SNAP FLANGE COVER: three units made of AISI 304 stainless steel, 0.8 mm thick and Ø 82 mm. Each cover snaps over mounting flange to conceal mounting screws.
-
Käetugi 695mm sirge
R/V teras AISI304
d 32mm
toru paksus 1,5mm
Pelavajutav äärikukate d 81mm
57,00 €
Description
Be-Line® anthracite straight grab bar Ø 35mm, L. 300mm
Ref. 511903C
Be-Line® grab bar Ø 35mm, for people with reduced mobility.
For use as a handrail or grab bar for WCs, showers or baths.
Aluminium tube, 3mm thick. Solid aluminium fixing points.
Rounded profile Ø 35mm with ergonomic flat front face that prevents rotation for an optimal grip.
Metallised anthracite powder-coated finish provides a good visual contrast with the wall.
Uniform surface for easy maintenance and hygiene.
38mm gap between the bar and the wall: minimal space prevents the forearm passing between the bar and the wall, reducing the risk of fracture in case of loss of balance.
Concealed fixings.
Supplied with stainless steel screws Ø 8 x 70mm for concrete walls.
300mm centre-to-centre.
Tested to over 200kg. Maximum recommended user weight: 135kg.
Technical features
Be-Line® anthracite straight grab bar Ø 35mm, L. 300mm
Ref. 511903C
| Length | 300mm |
|---|---|
| Width to the wall | 38mm |
| Thickness | 3mm |
| Finish | Metallised anthracite powder-coated aluminium |
Be-line T-shaped shower grab bar with sliding vertical bar
Ref. 511944C
Be-line T-shaped grab bar Ø 35mm for showers with sliding vertical bar.
Use as a shower rail and to support the user in an upright position.
Helps and secures entry and movement in the shower.
Use as a shower rail by adding a sliding shower head holder and/or soap dish.
Upright position can be adjusted during installation: can be moved to the left or the right in order to adapt the space(positioning of shower, depth of shower seat...).
Dimensions: 1,130 x 500mm.
Aluminium tube thickness 3mm. Solid aluminium fixing points.
Rounded profile Ø 35mm with ergonomic flat front face that prevents rotation for an optimal grip.
Metallised anthracite powder-coated aluminium provides a good visual contrast with the wall.
Uniform surface for easy maintenance and hygiene.
38mm gap between the bar and the wall: minimal space prevents the forearm passing between the bar and the wall, reducing the risk of fracture in case of loss of balance.
Concealed fixings.
Supplied with Ø 8 x 70mm stainless steel screws for concrete walls.
Tested to over 200kg. Maximum recommended user weight: 135kg.
Technical features
Be-line T-shaped shower grab bar with sliding vertical bar
Ref. 511944C
| Height | 1,130mm |
|---|---|
| Length | 500mm |
| Width to the wall | 38mm |
| Thickness | 3mm |
| Finish | Metallised anthracite powder-coated aluminium |
.jpg)
