Dushikomplekt PRESTO antivandaalne 512S, 1-200mm 31186
Kaubamärk:
Ühik: kompl
Tarneaeg: 14-21 päeva
‼️ Kasuta promokoodi KEVAD2026 ostukorvis ja saa soodustust – ainult täna!
▼ Loe edasi: ...
✅ Populaarsed tooted Tallinna laos kohe olemas — tarneaeg 1–3 päeva või tule ise järele.
✅ Kui toode on tellimisel, uuri lähemalt — saame tihti pakkuda oodatust kiiremat tarnet: info@pegu.ee
✅ Kõikidele toodetele garantii 2 aastat ja 14‑päevane tagastusõigus.
✅ Automaatne arve e‑postile. E‑arve soovijatel palume lisada märge kommentaaridesse.
ℹ️ Hind sisaldab käibemaksu.
Dushikomplekt PRESTO antivandaalne 512S, 1-200mm 31186
31186
Dushikomplekt antivandaalne 512S, 1-200mm
vandaalikindel
Failid
Function :
Kranikaussi segisti isesulguv, 15sek 3bar, kroom PRESTO 28610
Valamusegisti, segisti isesulguv, 15sek 3bar, kroom PRESTO
28610
Vajutava nupuga segisti
P 400 S BC
Presto
kroom
15 sek. töötsükkel 3 bar
3-6 l/min
473,00 €
Dušikomplekt SPORT isesulguv 30 sek temperatuuri regulaatoriga Idral KSA32/36
Dushikomplekt
kroom
30 sek töötsükkel
Segistiga+toru+otsik
Sobib spordiklubidesse, SPA, fitnesklubidesse ja GYM-ile
678,00 €
Portinox Aasia WC
PT
Aasia WC, R/V teras AISI 304
Automatne kummikute pesur düüsiga, 12V, 50Hz RST AZP Brno AMO 01
Automatne kummikute pesur düüsiga, 12V, 50Hz
automatic washing system for wellingtons with jets - 12V, 50Hz
AMO 01 is a stainless steel automatic washing system for wellingtons with sensor-controlled water nozzles. When stepping into the washing chamber of the system (scanning zone) water starts to flow from the nozzles automatically and wellingtons are cleaned of dirt. Water stops flowing with a certain time delay after the foot has been removed from the scanning zone.
AMO 01 is designed for a single pipe inlet of pre-mixed water from the circulation or water pre-mixed by means of a thermostatic valve.
The AMO 01 automatic washing system is intended mainly for operations with slight shoe contamination where quick washing at maximum water savings is guaranteed.
Package contents
- body of the washing machine
- photocell head
- nozzles – 8 pcs
- electromagnetic valves 2 pcs
- corner valves with filter
- connecting hoses
| Radius of sensor | 0 – 0,4 m |
| Water inlet | G 1/2“ |
| Water pressure | 0,3 – 1,0 MPa |
| Outlet | d = 32 mm |
| Inner dimensions of the trough | 250 x 400 x 280 mm |
| Electricity protection | IP 55 |
| Power supply | 12 V, 50 Hz |
| Power requirement | 10 VA |
| Source of power supply | ZAC 1/20 (max. 2 x AMO 01) |
| ZAC 1/50 (max. 5 x AMO 01) | |
| Weight | 18 kg |
- Set up water inlet as per picture
- Set up outlet d = 32 mm
- Set up cable for power supply – 12 V, 50 Hz from source of power supply ZAC
PRESTO NEO DUO S® isesulguv kraan 7/11 sek, antiblocking system 2L/min
64704
> Working pressure: 1 to 5 bar
> Flow: 1.9 l/min with flow regulator Anti water-hammer system
> Flow time: 7 seconds - lever upwards 11 seconds - lever downwards
> Hydraulic supply: G 1/2'' x 40
> Thermal resistance: This tap can withstand a thermal shock of 75°C for 30 minutes as part of a thermal shock programme
> Safety: With S® antiblocking system to prevent blocking in continuous flow
> Convenience: Soft-touch Two-coloured ergonomic lever, in glass fiber reinforced polymer
> Delivered with: 1 Filter gasket 1 base gasket 1 fixture nut + 1 stainless steel washer 1 Nut for 12x14 tube 1 rubber flat gasket 1 coloured sticker
> Standards / Approvals: Chrome-plated brass body compliant with standards NF EN1982 / NF EN12164 / NF EN12165 Nickel-Chrome surface treatment compliant with NF EN12540 Neutral Salt Spray (NSS) resistant: 200 h according to NF ISO 9227
224,00 €
