Köögisegistid – valik viimistluse järgi
Köögisegistid – Viimistlused, mis Kestavad: Matt Must, Messing ja PVD-kate
Köögisegistid – valik viimistluse järgi
PEGU.ee e-poest leiad laia valiku köögisegisteid, mis sobivad igasse interjööri ja igale maitsele. Meie sortiment katab kõik populaarsed viimistlused – alates trendikast matt mustast ja puhtast valgest kuni elegantse harjatud terase, klassikalise kroomi ja luksusliku messingini. Samuti pakume eritoone, nagu roosakaskuldne vask, sügav grafiithall või eksklusiivsed värvilised lahendused (sinine, roheline, kombineeritud viimistlused).
Tutvu tuntud brändide Damixa, Vola, Mora ja Hotbath kvaliteetsete segistitega ning leia oma kööki täiuslik lahendus. Olenemata sellest, kas eelistad modernset minimalismi või ajatult klassikalist stiili – aitab sul leida segisti, mis ühendab funktsionaalsuse ja disaini.
Valikus on viimistlused:
-
Matt must köögisegisti
-
Valge köögisegisti
-
Harjatud terasest köögisegisti
-
Kroomitud köögisegisti
-
Messingist köögisegisti (kuldne viimistlus)
-
Vaskne köögisegisti (roosakaskuldne toon)
-
Grafiithall köögisegisti (tumehall viimistlus)
-
Roostevabast terasest köögisegisti
-
Erilise viimistlusega köögisegisti (sinine, roheline, kombod)
. Meie e-poest leiad lihtsalt sobiva köögisegisti iga interjööri jaoks!
Segisti ostja juhend: millest segistid tehakse ja mis on PVD kate?
FAQ
-
Kas messing või roostevaba teras on parem segisti jaoks?
Messing on klassikaline ja usaldusväärne valik kodus. Roostevaba teras sobib professionaalsetesse projektidesse, kuna talub agressiivset keskkonda. -
Mis vahe on PVD kattel ja kroomimisel?
Kroomimine on galvaaniline kate, mis võib ajas tuhmuda. PVD kantakse vaakumis, see on 5–10 korda vastupidavam, kriimustuskindel ja keemiale resistentne. -
Milline kate sobib köögi jaoks kõige paremini?
Köögis on parimad messingist või roostevabast terasest segistid PVD kattega, sest need on lihtsasti hooldatavad ja vastupidavad rasvale ning puhastusvahenditele. -
Miks tsingist segistid on vähem vastupidavad?
Need võivad kiiremini oksüdeeruda ja praguneda, mistõttu nende eluiga on lühem kui messingil või roostevabal terasel.
Vaata lisaks:
- ✅ VANNITOA AKSESSUAARID – KOMPLEKTID, VIIMISTLUSED, KOLLEKTSIOONID
- ✅ SEGISTID JA DUŠISÜSTEEMID
- ✅ VANNITOA SISUSTUS JA WC TARVIKUD
- ✅ KÖÖGISEGISTID | PEGU.EE
- ✅ KÖÖGI AKSESSUAARID JA SISUSTUS
- ✅ KODU AKSESSUAARID JA SISUSTUS
- ✅ AVALIKUD TUALETTRUUMID JA HÜGIEENITARVIKUD
- ✅ PROFESSIONAALSED LAHENDUSED AVALIKUKS JA ERIKASUTUSEKS
- ✅ PRÜGIKASTID, SISEPRÜGIKASTID, VÄLIPRÜGIKASTID
- ✅ SANITAARTEHNIKA, TORUD JA KÜTTELAHENDUSED
- ✅ DISAINERI VALIK – UUED TRENDID KÖÖKI JA VANNITUPPA
Alamgrupid
-
Matt must segisti kööki
-
Valged köögisegistid
-
Harjatud terasest köögisegistid
-
Kroomitud köögisegistid
-
Messingist köögisegistid (kuldne viimistlus)
-
Vaskist köögisegistid (roosakaskuldne toon)
-
Grafiithallid köögisegistid (tumehall viimistlus)
-
Roostevabast terasest köögisegistid
-
Erilise viimistlusega köögisegistid (sinine, roheline, kombod)
❓ Otsid õiget toodet, kuid ei ole kindel, mis sobib?
PEGU.ee aitab valida – räägi otse eksperdiga, kellel on 25+ aastat kogemust segistite, dušisüsteemide ja aksessuaaride alal.
Küsi nõuTarne ja saadavus PEGU.ee-s
✅ Enamik PEGU.ee populaarseid ja käibetooteid on laos olemas – see tähendab, et tarneaeg Eestis on 1–3 päeva.
✅ Soovi korral saab tooted ise laost järele tulla.
✅ Kui toode on tellimisel ja tuleb tehasest, on tavapärane tarneaeg 2–4 nädalat.
Täpse tarneaja saab alati enne tellimist üle küsida või pärast tellimuse esitamist anname kliendile tarneinfo kohe teada.
Küsimuste või e-arve soovi korral kirjuta meile: info@pegu.ee
D Line Köögisegisti QTOO stainless steel AISI316 - PVD messing poleeritud QT2100PP3
Köögisegisti QTOO stainless steel AISI316 - PVD messing poleeritud
PRODUCT:
Kitchen tap in marine grade stainless steel. Conforms to CSA with min. 500.000 operation cycles securing long life span.
PRODUCT SPECIFICATION
7 7/8”_200mm projection
Swivel spout
Built-in aerator
Total height 11”_280mm
Height to aerator 6 3/32”_155mm
2x 3/8” flexible supply lines
Water flow rate limited to max. 2.2 gpm_8.4 ltr. Marine grade stainless steel AISI316
Lead free compliant
PVD colours:
Satin brass (MP3) - Satin copper (MP2) - Satin Charcoal (MP4) - Polished brass (PP3) - Polished copper (PP2) - Polished Charcoal (PP4)
PRODUCT CARE
d line products are produced in the highest quality stainless steel, marine grade, AISI 316. To sustain the unique d line finish appearance please follow the below instructions: ● Wash down the surfaces using soapy water or mild detergent
● Always thoroughly rinse off with clean water
● To complete the cleaning procedure dry/polish the surfaces with a soft dry cloth
Please do not use scouring powder, steel wool, chloride based detergents or other aggressive cleaning products as these may damage the surface.
If spots or corrosion appear on the surface it is not due to the stainless steel quality, but to impurities in the environment, aggressive conditions or improper or insufficient cleaning
D Line Köögisegisti QTOO stainless steel AISI316 - PVD messing satin QT2100MP3
Köögisegisti QTOO stainless steel AISI316 - PVD messing satin
PRODUCT:
Kitchen tap in marine grade stainless steel. Conforms to CSA with min. 500.000 operation cycles securing long life span.
PRODUCT SPECIFICATION
7 7/8”_200mm projection
Swivel spout
Built-in aerator
Total height 11”_280mm
Height to aerator 6 3/32”_155mm
2x 3/8” flexible supply lines
Water flow rate limited to max. 2.2 gpm_8.4 ltr. Marine grade stainless steel AISI316
Lead free compliant
PVD colours:
Satin brass (MP3) - Satin copper (MP2) - Satin Charcoal (MP4) - Polished brass (PP3) - Polished copper (PP2) - Polished Charcoal (PP4)
PRODUCT CARE
d line products are produced in the highest quality stainless steel, marine grade, AISI 316. To sustain the unique d line finish appearance please follow the below instructions: ● Wash down the surfaces using soapy water or mild detergent
● Always thoroughly rinse off with clean water
● To complete the cleaning procedure dry/polish the surfaces with a soft dry cloth
Please do not use scouring powder, steel wool, chloride based detergents or other aggressive cleaning products as these may damage the surface.
If spots or corrosion appear on the surface it is not due to the stainless steel quality, but to impurities in the environment, aggressive conditions or improper or insufficient cleaning
D Line Köögisegisti QTOO stainless steel AISI316 - PVD must poleeritud QT2100PP4
Köögisegisti QTOO stainless steel AISI316 - PVD must poleeritud
PRODUCT:
Kitchen tap in marine grade stainless steel. Conforms to CSA with min. 500.000 operation cycles securing long life span.
PRODUCT SPECIFICATION
7 7/8”_200mm projection
Swivel spout
Built-in aerator
Total height 11”_280mm
Height to aerator 6 3/32”_155mm
2x 3/8” flexible supply lines
Water flow rate limited to max. 2.2 gpm_8.4 ltr. Marine grade stainless steel AISI316
Lead free compliant
PVD colours:
Satin brass (MP3) - Satin copper (MP2) - Satin Charcoal (MP4) - Polished brass (PP3) - Polished copper (PP2) - Polished Charcoal (PP4)
PRODUCT CARE
d line products are produced in the highest quality stainless steel, marine grade, AISI 316. To sustain the unique d line finish appearance please follow the below instructions: ● Wash down the surfaces using soapy water or mild detergent
● Always thoroughly rinse off with clean water
● To complete the cleaning procedure dry/polish the surfaces with a soft dry cloth
Please do not use scouring powder, steel wool, chloride based detergents or other aggressive cleaning products as these may damage the surface.
If spots or corrosion appear on the surface it is not due to the stainless steel quality, but to impurities in the environment, aggressive conditions or improper or insufficient cleaning
D Line Köögisegisti QTOO stainless steel AISI316 - PVD must satiin QT2100MP4
Köögisegisti QTOO stainless steel AISI316 - PVD must satiin
PRODUCT:
Kitchen tap in marine grade stainless steel. Conforms to CSA with min. 500.000 operation cycles securing long life span.
PRODUCT SPECIFICATION
7 7/8”_200mm projection
Swivel spout
Built-in aerator
Total height 11”_280mm
Height to aerator 6 3/32”_155mm
2x 3/8” flexible supply lines
Water flow rate limited to max. 2.2 gpm_8.4 ltr. Marine grade stainless steel AISI316
Lead free compliant
PVD colours:
Satin brass (MP3) - Satin copper (MP2) - Satin Charcoal (MP4) - Polished brass (PP3) - Polished copper (PP2) - Polished Charcoal (PP4)
PRODUCT CARE
d line products are produced in the highest quality stainless steel, marine grade, AISI 316. To sustain the unique d line finish appearance please follow the below instructions: ● Wash down the surfaces using soapy water or mild detergent
● Always thoroughly rinse off with clean water
● To complete the cleaning procedure dry/polish the surfaces with a soft dry cloth
Please do not use scouring powder, steel wool, chloride based detergents or other aggressive cleaning products as these may damage the surface.
If spots or corrosion appear on the surface it is not due to the stainless steel quality, but to impurities in the environment, aggressive conditions or improper or insufficient cleaning
D Line Köögisegisti QTOO stainless steel AISI316 - PVD vask poleeritud QT2100PP2
Köögisegisti QTOO stainless steel AISI316 - PVD vask poleeritud
PRODUCT:
Kitchen tap in marine grade stainless steel. Conforms to CSA with min. 500.000 operation cycles securing long life span.
PRODUCT SPECIFICATION
7 7/8”_200mm projection
Swivel spout
Built-in aerator
Total height 11”_280mm
Height to aerator 6 3/32”_155mm
2x 3/8” flexible supply lines
Water flow rate limited to max. 2.2 gpm_8.4 ltr. Marine grade stainless steel AISI316
Lead free compliant
PVD colours:
Satin brass (MP3) - Satin copper (MP2) - Satin Charcoal (MP4) - Polished brass (PP3) - Polished copper (PP2) - Polished Charcoal (PP4)
PRODUCT CARE
d line products are produced in the highest quality stainless steel, marine grade, AISI 316. To sustain the unique d line finish appearance please follow the below instructions: ● Wash down the surfaces using soapy water or mild detergent
● Always thoroughly rinse off with clean water
● To complete the cleaning procedure dry/polish the surfaces with a soft dry cloth
Please do not use scouring powder, steel wool, chloride based detergents or other aggressive cleaning products as these may damage the surface.
If spots or corrosion appear on the surface it is not due to the stainless steel quality, but to impurities in the environment, aggressive conditions or improper or insufficient cleaning
D Line Köögisegisti QTOO stainless steel AISI316 - PVD vask satiin QT2100MP2
Köögisegisti QTOO stainless steel AISI316 - PVD vask satiin
PRODUCT:
Kitchen tap in marine grade stainless steel. Conforms to CSA with min. 500.000 operation cycles securing long life span.
PRODUCT SPECIFICATION
7 7/8”_200mm projection
Swivel spout
Built-in aerator
Total height 11”_280mm
Height to aerator 6 3/32”_155mm
2x 3/8” flexible supply lines
Water flow rate limited to max. 2.2 gpm_8.4 ltr. Marine grade stainless steel AISI316
Lead free compliant
PVD colours:
Satin brass (MP3) - Satin copper (MP2) - Satin Charcoal (MP4) - Polished brass (PP3) - Polished copper (PP2) - Polished Charcoal (PP4)
PRODUCT CARE
d line products are produced in the highest quality stainless steel, marine grade, AISI 316. To sustain the unique d line finish appearance please follow the below instructions: ● Wash down the surfaces using soapy water or mild detergent
● Always thoroughly rinse off with clean water
● To complete the cleaning procedure dry/polish the surfaces with a soft dry cloth
Please do not use scouring powder, steel wool, chloride based detergents or other aggressive cleaning products as these may damage the surface.
If spots or corrosion appear on the surface it is not due to the stainless steel quality, but to impurities in the environment, aggressive conditions or improper or insufficient cleaning
D Line Köögisegisti QTOO stainless steel AISI316 - steel poleeritud QT2100P
Köögisegisti QTOO stainless steel AISI316 - steel polished
PRODUCT:
Kitchen tap in marine grade stainless steel. Conforms to CSA with min. 500.000 operation cycles securing long life span.
PRODUCT SPECIFICATION
7 7/8”_200mm projection
Swivel spout
Built-in aerator
Total height 11”_280mm
Height to aerator 6 3/32”_155mm
2x 3/8” flexible supply lines
Water flow rate limited to max. 2.2 gpm_8.4 ltr. Marine grade stainless steel AISI316
Lead free compliant
PVD colours:
Satin brass (MP3) - Satin copper (MP2) - Satin Charcoal (MP4) - Polished brass (PP3) - Polished copper (PP2) - Polished Charcoal (PP4)
PRODUCT CARE
d line products are produced in the highest quality stainless steel, marine grade, AISI 316. To sustain the unique d line finish appearance please follow the below instructions: ● Wash down the surfaces using soapy water or mild detergent
● Always thoroughly rinse off with clean water
● To complete the cleaning procedure dry/polish the surfaces with a soft dry cloth
Please do not use scouring powder, steel wool, chloride based detergents or other aggressive cleaning products as these may damage the surface.
If spots or corrosion appear on the surface it is not due to the stainless steel quality, but to impurities in the environment, aggressive conditions or improper or insufficient cleaning
D Line Köögisegisti QTOO stainless steel AISI316 - steel satin QT2100M
Köögisegisti QTOO stainless steel AISI316 - steel satin
PRODUCT:
Kitchen tap in marine grade stainless steel. Conforms to CSA with min. 500.000 operation cycles securing long life span.
PRODUCT SPECIFICATION
7 7/8”_200mm projection
Swivel spout
Built-in aerator
Total height 11”_280mm
Height to aerator 6 3/32”_155mm
2x 3/8” flexible supply lines
Water flow rate limited to max. 2.2 gpm_8.4 ltr. Marine grade stainless steel AISI316
Lead free compliant
PVD colours:
Satin brass (MP3) - Satin copper (MP2) - Satin Charcoal (MP4) - Polished brass (PP3) - Polished copper (PP2) - Polished Charcoal (PP4)
PRODUCT CARE
d line products are produced in the highest quality stainless steel, marine grade, AISI 316. To sustain the unique d line finish appearance please follow the below instructions: ● Wash down the surfaces using soapy water or mild detergent
● Always thoroughly rinse off with clean water
● To complete the cleaning procedure dry/polish the surfaces with a soft dry cloth
Please do not use scouring powder, steel wool, chloride based detergents or other aggressive cleaning products as these may damage the surface.
If spots or corrosion appear on the surface it is not due to the stainless steel quality, but to impurities in the environment, aggressive conditions or improper or insufficient cleaning
Damixa Fern köögisegisti kroom, L-Spout LM
Artikli number 68066
- Viimistlused Kroom
- Standardfunktsioonid
- Keraamiline tööorgan.
- Põletuskaitsega
- Veesäästu funktsioon Eco-Save.
- Twist & Save
- Pööratav jooksutoru.
- 120° pöördepiiraja.
- Kummiaeraator – lihtne puhastada.
167,70 €
Damixa Fern köögisegisti, C-Spout kroom
6807000
162,62 €
Damixa Fern köögisegisti, C-Spout, pesumasinakraaniga kroom
Standard features
238,85 €
Damixa Fern köögisegisti, J-Spout, pesumasinakraaniga kroom LM
Standard features
238,85 €
Damixa köögiseegisti Bell kroom
9004700
Bell
Kitchen Mixer with X-ChangeTMConnector Kit
- Article no.: 90047
- Finishes: Chrome
- Standard Features:
- Ceramic cartridge
- Scalding protection (38ºC)
- Eco-Save water saving feature
- Cold-start
- Swivel spout
- 120° swivel limitation
- Rub-Clean
315,08 €
Damixa köögisegisti Clover Easy kõrge, x-change, kroom/must LM
Köögisegisti
X-Change
233,77 €
Damixa Osier köögisegisti, kroom
1808700
- Keraamiline tööorgan.
- Põletuskaitsega
- Veesäästu funktsioon Eco-Save.
- Külm start.
- Pööratav jooksutoru.
- 120° pöördepiiraja.
- Kummiaeraator – lihtne puhastada.
233,77 €
Damixa Slate C tila köögisegisti X-Change ühendus, kroom/must
6507774
- Ceramic cartridge
- Scalding protection (38ºC)
- Eco-Save water saving feature
- Cold-start
- Swivel spout
- 120° swivel limitation
- Rub-clean aerator
289,67 €
Damixa Slate köögisegisti x-changiga kroom/must LM
- Keraamiline tööorgan.
- Põletuskaitsega
- Veesäästu funktsioon Eco-Save.
- Pööratav jooksutoru.
- 120° pöördepiiraja.
- Kummiaeraator – lihtne puhastada.
355,74 €
Delabie köögisegisti Professionaalne köök 5625
Pre-rinse set with mixer
Ref. 5625
Complete pre-rinse set with bib tap.
Single hole deck-mounted mixer with slimline control lever.
Supplied with F3/8" flexible hoses and non-return valves.
Bib tap with swivelling, tubular spout L. 200mm.
- 16 lpm full flow rate achieved within the first 90°.
- Valve head with reinforced mechanism and ergonomic control.
Black, scale-resistant M1/2" hand spray with adjustable jet and 9 lpm flow rate at the outlet.
Reinforced, food-grade black flexible hose L. 0.95m.
3/4" brass column.
Adjustable wall bracket.
Stainless steel spring guide.
TECHNICAL FEATURES
Pre-rinse set with mixer
Ref. 5625
| Connector | F3/8" |
|---|---|
| Height | 1105-1225mm |
| Drop height | 340 - 580mm |
| Flow rate | 16 lpm |
| Width to the wall | 35-162mm |
| Finish | Chrome-plated brass |
Delabie köögisegisti Professionaalne köök 5626
Pre-rinse set with mixer
Ref. 5626
Complete pre-rinse set without bib tap.
Single hole deck-mounted mixer with slimline control lever.
Supplied with F3/8" flexible hoses and non-return valves.
Black, scale-resistant M1/2" hand spray with adjustable jet and 9 lpm flow rate at the outlet.
Reinforced, food-grade black flexible hose L. 0.95m.
3/4" brass column.
Adjustable wall bracket.
Stainless steel spring guide.
TECHNICAL FEATURES
Pre-rinse set with mixer
Ref. 5626
| Connector | F3/8" |
|---|---|
| Height | 1105-1225mm |
| Drop height | 340 - 580mm |
| Flow rate | 9 lpm |
| Width to the wall | 35-162mm |
| Finish | Chrome-plated brass |
Delabie köögisegisti Professionaalne köök 5630
Pre-rinse set with mixer
Ref. 5630
Complete pre-rinse set without bib tap.
Deck-mounted single hole mixer with:
- Valve heads with reinforced mechanisms and ergonomic control levers.
- F3/8" flexibles and non-return valves.
- Reinforced fixing via 2 threaded rods with back-nuts.
Black, scale-resistant M1/2" hand spray with adjustable jet and 9 lpm flow rate at the outlet.
Black, reinforced, food-grade flexible hose L. 0.95m.
3/4" brass column.
Adjustable wall bracket.
Stainless steel spring guide.
TECHNICAL FEATURES
Pre-rinse set with mixer
Ref. 5630
| Connector | F3/8" |
|---|---|
| Height | 1080-1200mm |
| Drop height | 315-555mm |
| Flow rate | 9 lpm |
| Width to the wall | 35-162mm |
| Finish | Chrome-plated brass |
Delabie köögisegisti Professionaalne köök 5632
Pre-rinse set with mixer
Ref. 5632
Complete pre-rinse set with bib tap.
Deck-mounted single hole mixer with:
- Valve heads with reinforced mechanisms with ergonomic control levers.
- F3/8" flexibles and non-return valves.
- Reinforced fixing via 2 threaded rods with back-nuts.
Bib tap with swivelling, tubular spout L. 200mm.
- 20 lpm full flow rate achieved within the first 90°.
- Valve head with reinforced mechanism with ergonomic control lever.
Black, scale-resistant M1/2" hand spray with adjustable jet and 9 lpm flow rate at the outlet.
Black, reinforced, food-grade flexible hose L. 0.95m.
3/4" brass column.
Adjustable wall bracket.
Stainless steel spring guide.
TECHNICAL FEATURES
Pre-rinse set with mixer
Ref. 5632
| Connector | F3/8" |
|---|---|
| Height | 1080 - 1200mm |
| Drop height | 315-555mm |
| Flow rate | 20 lpm |
| Width to the wall | 35 - 162mm |
| Finish | Chrome-plated brass |
Delabie köögisegisti Professionaalne köök 5633
Twin hole pre-rinse set with mixer
Ref. 5633
Complete pre-rinse set with bib tap.
Deck-mounted twin hole mixer with 150mm centres with:
- Valve heads with reinforced mechanisms with ergonomic control levers.
- Offset inlet connections with M1/2" tails.
Bib tap with:
- Swivelling, tubular spout L. 200mm.
- 25 lpm full flow rate achieved within the first 90°.
- Valve head with reinforced mechanism with ergonomic control lever.
Black, scale-resistant M1/2" hand spray with adjustable jet and 9 lpm flow rate at the outlet.
Black, reinforced, food-grade flexible hose L. 0.95m.
3/4" brass column.
Adjustable wall bracket.
Stainless steel spring guide.
TECHNICAL FEATURES
Twin hole pre-rinse set with mixer
Ref. 5633
| Connector | M1/2" |
|---|---|
| Height | 1110 - 1230mm |
| Drop height | 345 - 585mm |
| Flow rate | 25 lpm |
| Width to the wall | 35 - 162mm |
| Finish | Chrome-plated brass |
Delabie köögisegisti Professionaalne köök 5633UK
Twin hole pre-rinse set with mixer
Ref. 5633UK
Complete pre-rinse set with bib tap.
Deck-mounted twin hole mixer with 180mm centres with:
- Valve heads with reinforced mechanisms with ergonomic control levers.
- Offset inlet connections with M1/2" tails.
Bib tap with:
- Swivelling, tubular spout L. 200mm.
- 25 lpm full flow rate achieved within the first 90°.
- Valve head with reinforced mechanism with ergonomic control lever.
Black, scale-resistant M1/2" hand spray with adjustable jet and 9 lpm flow rate at the outlet.
Black, reinforced, food-grade flexible hose L. 0.95m.
3/4" brass column.
Adjustable wall bracket.
Stainless steel spring guide.
TECHNICAL FEATURES
Twin hole pre-rinse set with mixer
Ref. 5633UK
| Connector | M1/2" |
|---|---|
| Height | 1110-1230mm |
| Drop height | 345 - 585mm |
| Flow rate | 25 lpm |
| Width to the wall | 35 - 162mm |
| Finish | Chrome-plated brass |
Delabie köögisegisti Professionaalne köök 5634
Wall-mounted pre-rinse set with mixer
Ref. 5634
Complete pre-rinse set with bib tap.
Wall-mounted mixer, F3/4" with adjustable centres with:
- Valve heads with reinforced mechanisms with ergonomic control levers.
- M1/2" M3/4" offset connectors.
- Non-return valves integrated in the mixer.
Bib tap with:
- Swivelling, tubular spout L. 200mm.
- 25 lpm full flow rate achieved within 90°.
- Valve head with reinforced mechanism with ergonomic control lever.
Black, scale-resistant M1/2" hand spray with adjustable jet and 9 lpm flow rate at the outlet.
Black, reinforced, food-grade flexible hose L.0.95m.
3/4" brass column.
Adjustable wall bracket.
Stainless steel spring guide.
TECHNICAL FEATURES
Wall-mounted pre-rinse set with mixer
Ref. 5634
| Connector | M1/2" |
|---|---|
| Height | 860 - 930mm |
| Flow rate | 25 lpm |
| Width to the wall | 35 - 162mm |
| Finish | Chrome-plated brass |
Delabie köögisegisti Professionaalne köök 5636
Wall-mounted pre-rinse set with mixer
Ref. 5636
Complete pre-rinse set without bib tap.
Wall-mounted mixer, F3/4" with adjustable centres with:
- Valve heads with reinforced mechanisms with ergonomic ball levers.
- M1/2" M3/4" offset connectors.
- Non-return valves integrated in the mixer.
Black, scale-resistant M1/2" hand spray with adjustable jet and 9 lpm flow rate at the outlet.
Black, reinforced, food-grade flexible hose L. 0.95m.
3/4" brass column.
Adjustable wall bracket.
Stainless steel spring guide.
TECHNICAL FEATURES
Wall-mounted pre-rinse set with mixer
Ref. 5636
| Connector | M1/2" |
|---|---|
| Height | 860 - 930mm |
| Flow rate | 9 lpm |
| Width to the wall | 35 - 162mm |
| Finish | Chrome-plated brass |
Delabie köögisegisti Professionaalne köök 5680
Twin hole pre-rinse set with mixer
Ref. 5680
Complete pre-rinse set without bib tap.
Deck-mounted twin hole mixer with 150mm centres with:
- Valve heads with reinforced mechanisms with ergonomic control levers.
- Offset inlet connections with M1/2" tails.
Black, scale-resistant M1/2" hand spray with adjustable jet and 9 lpm flow rate at the outlet.
Black, reinforced, food-grade flexible hose L. 0.95m.
3/4" brass column.
Adjustable wall bracket.
Stainless steel spring guide.
TECHNICAL FEATURES
Twin hole pre-rinse set with mixer
Ref. 5680
| Connector | M1/2" |
|---|---|
| Height | 1110 - 1230mm |
| Drop height | 345 - 585mm |
| Flow rate | 9 lpm |
| Width to the wall | 35 - 162mm |
| Finish | Chrome-plated brass |
Twin hole pre-rinse set with mixer
Ref. 5680UK
Complete pre-rinse set without bib tap.
Deck-mounted twin hole mixer with 180mm centres with:
- Valve heads with reinforced mechanisms with ergonomic control levers.
- Offset inlet connections with M1/2" tails.
Black, scale-resistant M1/2" hand spray with adjustable jet and 9 lpm flow rate at the outlet.
Black, reinforced, food-grade flexible hose L. 0.95m.
3/4" brass column.
Adjustable wall bracket.
Stainless steel spring guide.
TECHNICAL FEATURES
Twin hole pre-rinse set with mixer
Ref. 5680UK
| Connector | M1/2" |
|---|---|
| Height | 1110 - 1230mm |
| Drop height | 345 - 585mm |
| Flow rate | 9 lpm |
| Width to the wall | 35 - 162mm |
| Finish | Chrome-plated brass |
Delabie köögisegisti Professionaalne köök 6692
Pre-rinse set with mixer
Ref. 6692
Complete pre-rinse set with bib tap.
Deck-mounted single hole mixer with slimline control lever.
Supplied with F3/8" flexibles and non-return valves.
Bib tap with telescopic, swivelling spout L. 200 - 290mm.
- Flow rate 16 lpm at the outlet.
- Valve head with control knob.
White, scale-resistant M1/2" hand spray with adjustable jet and 9 lpm flow rate at the outlet.
Reinforced, food-grade, white flexible hose L. 0.95m.
3/4" brass column.
Adjustable wall bracket.
Stainless steel spring guide.
TECHNICAL FEATURES
Pre-rinse set with mixer
Ref. 6692
| Connector | F3/8" |
|---|---|
| Height | 1105-1225 mm |
| Drop height | 340-580 mm |
| Flow rate | 16 lpm |
| Width to the wall | 35-162 mm |
| Finish | Chrome-plated brass |
Delabie köögisegisti Professionaalne köök 6693
Pre-rinse set with mixer
Ref. 6693
Complete pre-rinse set without bib tap.
Deck-mounted single hole mixer with slimline control lever.
Supplied with F3/8" flexibles and non-return valves.
White, scale-resistant M1/2" hand spray with adjustable jet and 9 lpm flow rate at the outlet.
Reinforced, food-grade, white flexible hose L. 0.95m.
3/4" brass column.
Adjustable wall bracket.
Stainless steel spring guide.
TECHNICAL FEATURES
Pre-rinse set with mixer
Ref. 6693
| Connector | F3/8" |
|---|---|
| Height | 1105-1225 mm |
| Drop height | 340-580 mm |
| Flow rate | 9 lpm |
| Width to the wall | 35-162 mm |
| Finish | Chrome-plated brass |
Delabie köögisegisti Professionaalne köök G6432
Wall-mounted pre-rinse set with mixer
Ref. G6432
Complete pre-rinse set with bib tap.
Wall-mounted F3/4" mixer with 150mm centres with:
- Valve heads with control knobs.
- Non-return valves integrated in the mixer.
Bib tap with:
- Telescopic, swivelling spout L. 200-290mm with 25 lpm flow rate at the outlet.
- Valve head with control knob.
White, scale-resistant M1/2" hand spray with adjustable spray and 9 lpm flow rate at the outlet.
White, reinforced, food-grade flexible hose L. 0.95m.
3/4" brass column.
Adjustable wall bracket.
Stainless steel spring guide.
TECHNICAL FEATURES
Wall-mounted pre-rinse set with mixer
Ref. G6432
| Connector | F3/4" |
|---|---|
| Flow rate | 25 lpm |
| Width to the wall | 35-162mm |
| Finish | Chrome-plated brass |
