Tootegrupid

Joogifontaan, 3/8" keere

Tootekood: DE-312QU1
Kaubamärk:
Ühik: tk
Tarneaeg: 7 päeva
Hind: 135,00 €
128,25 €
Kogus: - +
   - või -   
Sarnased tooted

Põlvekraan kas külma, või eelsegatud veele, isesulgev 390mm

15 sek on töötsükkel

Tootekood: P31683 ,   Tarneaeg: 7 päeva
116,10 € (10%)
129,00 €
Tootekood: P63210 ,   Tarneaeg: 7-14 päeva
128,00 €
 
 

AUS 11

Pressure button-controlled shower for heat regulated water

 

 

   
 
 
 

AUS 11 is a new type of shower fitting for single shower control. The fitting is designated for premixed water – with one water inlet and shower outlet elbow. Water is released and closed by an anti-vandal pressure button connected to electronics and an electromagnetic valve. The fitting is covered by a rust-free anti-vandal cover to prevent damage. 

The mounting system has been designed so as to make removing the cover without using tools impossible with no bolt or screw being visible. The cover can be "pushed into" the wall level even if the mount box has been walled to an incorrect depth. 

AUS 11 is identical to AUS 1P with a different design and very resistant cover sheet. 

Electronics can work in two modes: 

1) The button works on the START/STOP basis – water release/closing. If the water is not turned off upon the time adjusted by the user or manager (e.g. 20 seconds), the electronic system itself instructs water stopping. The user must press again to start water running. This significantly saves water as the user reduces the showering time. 

2) The button works on the START/STOP basis. After the time adjusted by the manager (e.g. 3 minutes) expires there is a forced break when water cannot be released. During this time, the user is forced to leave the shower or wait. This prevents needless showering – water wasting. 

 

 
Basic technical information
Water input: G 1/2“
Water pressure: 1 - 10 Bar (0,1 – 1,0 MPa)
Time of water flow: 10 s – 42,5 min in mode 1
  0 s - 42,5 min in mode 2
Power supply: 12 V, 50 Hz
Power requirement: 6 VA
Source of power supplz: ZAC 1/20 (max. 3× AUS 11)
  ZAC 1/50 (max. 8× AUS 11)
Weight: 2,0 kg
 
 
Requirements for setting up the construction
  1. Water installation set up as per picture
  2. Set-up alcove 150 x 75 mm for installation casket
  3. Set-up cable for power supply – 12 V, 50 Hz from source of power supply ZAC
 
 
Complete delivery
  • installation casket
  • input and output bolting
  • electromagnetic valve
  • spherical valve
  • covering metal plate with piezo button
  • electronics
 
 
Made to order
  • SP 1 – shower arm with water flow of 9 l/min
  • SP 2 – shower arm with water flow of 7 l/min
  • SP 3 – shower arm with water flow of 7 l/min
  • ZAC - source of power supply 12V, 50Hz
 
 
Figure
 
 
A - water inlet G 1/2"
C - electricity supply cable 12 V, 50 Hz 
G - water outlet into shower armG 1/2"
 
 
 
 
Download information about the product
AUS 11 data for projectants - ( 84 kB )
 
Tootekood: AZP-AUS 11 ,   Tarneaeg: 3-4 nädalad
254,00 €

The advantage of freedom

Damixa Free was designed for use in public and private buildings with many users. It’s a non-contact tap that automatically opens and closes the flow of water. It’s hygienic, robust and water-saving. Free has been well thought out from start to finish, focusing on ease of installation, cleaning and maintenance.

How we created Free

Free was designed by Claus Rantzau, an in-house design engineer at Damixa.

“Free was created to meet the demands of large buildings with many different tap users. The geometry of this tap fixture has been kept free of edges and corners where limescale and dirt tend to gather. This is for places where an extra robust tap that is easy to install and maintain is needed. This is why Free has been given a robust, industrial feel,” says Claus Rantzau.

 
 
 
 
Tootekood: D2802000 ,   Tarneaeg: 7-14 päeva
287,00 €

390x700mm

100L 

Tootekood: RO57342 ,   Tarneaeg: 7-14 päeva
234,00 € (10%)
260,00 €