Tootegrupid
Kaubamärgid
Uudised
Esileht » Liivaeraldusnou Kavika ilma jalgadeta 480х330х120 мм
Laost otsas
Kavika 7070.png Zoom
Kavika 7070.png 7070_ja_7070T_hiekanerotusallas_S.jpg

Liivaeraldusnou Kavika ilma jalgadeta 480х330х120 мм

Tootekood: KAV7070
Kaubamärk:
Ühik: tk
Tarneaeg: 14-21 päeva

Proovi kupongikoodi PEGU-KEVAD ! Vali toode täishinnaga, lisa see ostukorvi ja sisesta kupongikood ostu sooritamisel! Kupongikoodi kasutamise aeg on piiratud!

Lugupeetud PEGU.EE veebipoes külastajad!

Tere tulemast meie internetipoes! Me ei ole lihtsalt iseteeninduse kassa. Kui teil on vaja nõu või abi toote valimisel, võtke meiega julgesti ühendust kas e-mailiga või messendzeriga, telefoni teel. Oleme alati valmis pakkuma teile personaalset teenindust! Täname külastuse eest!

PEGU.EE meeskond

ESTO järelmaks kuumaks al. 62,37 €
Hind:
725,00 €
Kuumakse alates: 62,37 €
Kogus: - +

Liivaeraldusnou Kavika jalgadel 480х330х120 мм

Liiva settimise funktsiooniga drenaažid 7070 

 
Selle äravoolu eesmärk on takistada liiva sattumist kanalisatsioonisüsteemi. See äravool on paigaldatud kraanikausi kõrval asuvatesse pesuruumidesse, samuti juhitakse pesumasina äravooluvoolik läbi äravoolu 7070. Drenaaži sisemine eemaldatav osa on mõeldud liiva ja mustuse settimiseks, see on kergesti eraldatav ja pestav. Vesi siseneb äravoolu äravoolukaane auku paigaldatud vooliku kaudu. Vesi juhitakse äravooluga ühendatava DN32 äravoolutoru kaudu. 
 
Välismõõdud 480х330х120 mm 
Sisemõõdud 300х280х115 mm 
 
Liiva settimisfunktsiooniga 7070 on äravool lameda lameda põhjaga, mis võimaldab selle paigaldada valamu alumisele riiulile valamu alla. Liiva settimise funktsiooniga drenaažid 7070 Liiva settimise funktsiooniga drenaažid 7070 / T Liiva settimisfunktsiooniga 7070 / T äravool on varustatud metalljalgadega, vastasel juhul on disain sama, nagu eespool kirjeldatud. Jalgadel on reguleeritava kõrgusega jalad, mis muudab äravoolu paigaldamise ebaühtlastele põrandatele lihtsaks.
 

Сливы с функцией осаждения песка 7070

Назначение данного слива – препятствовать попаданию песка в канализационную систему. Данный слив устанавливают в моечных помещениях рядом с моечной раковиной, также через слив 7070 пропускают сточный шланг от стиральной машины.

Внутренняя, съемная часть слива служит для осаждения песка и грязи, она легко отделяется и моется. Вода поступает в слив через шланг, устанавливаемый в отверстие крышки слива. Отвод воды осуществляется через сливной патрубок DN32, который присоединяется к канализационному трапу.

Внешние размеры 480х330х120 мм Внутренние размеры 300х280х115 мм

Слив с функцией осаждения песка 7070 изготавливается с ровным плоским дном, что даёт возможность устанавливать его на нижнюю полку стола-мойки, под раковину.

 

Сливы с функцией осаждения песка 7070/T

Слив с функцией осаждения песка 7070/Т оснащается металлическими ножками, в остальном конструкция аналогична вышеописанной. Ножки имеют регулируемые по высоте опоры, благодаря чему Слив легко устанавливается на неровном полу.

 

Sand separator basin 7070

The sand separator basin is intended for preventing sand from entering the sewer network. Sand separator basins are used in cleaning cupboards in connection with washbasins.

The detachable inner basin serves as the actual separator basin that is easy to empty.
The supply water pipe is led into the basin through the hole in the cover, and the discharge pipe, DN32, is connected to the floor drain.

Outer dimensions 480x330x120 mm
Inner basin 300x280x115 mm

The sand separator basin 7070 comes with a flat bottom, which makes it possible to place it on the washstand’s lower shelf below the sink.

Basic model sand separator basin and the legged model

Sand separator basin 7070/T

The sand separator basin 7070/T is equipped with low legs; in other respects the structure is similar to the model described above. The leg adjustment pads make it easy to place the sand separator basin in a room with a sloping floor.

Sarnased tooted
Laos
Valamu Fraju roostevaba teras , ilma ülejooksuta
Valamu Fraju roostevaba teras , ilma ülejooksuta

FRAJU wall-mounted washbasin 
Ref. 120430

Wall-mounted washbasin, 540x480mm.
Bacteriostatic 304 stainless steel.
Polished satin finish.
Stainless steel thickness: 1.2mm for the bowl and 1.5mm for surround.
Rounded edges prevent injury.
Without tap hole.
Supplied with 1¼" waste.
Without overflow.
Supplied with fixing elements.
CE marked. Complies with European standard EN 14688.
Weight: 4.65kg. 

Tootekood: DE-120430 ,   Tarneaeg: 1-2 nädalad
555,10 €
Laost otsas
Antivandaalne WC pott INVA R/V taras
Antivandaalne WC pott INVA R/V taras

Antivandaalne WC pott INVA R/V taras

AUZ 08 INV is a stainless-steel WC in matt design for the disabled. It is a stainless-steel toilet to stand on the floor at the wall. The drain is directed backwards (the bottom drain version AUZ 02 INV). The closet is based on the standard AUZ 08, which is heightened and lengthened to fulfil the directive regarding products for disabled persons. To increase the user comfort, the seating part is provided with a seat from hardened plastic. The closet includes a removable backrest recommended by the League for the rights of the wheelchair bound.

 

The standing WC is suitable for places where the common closet cannot be attached to the side wall, because of a thin bearing particle, for example.

 

It is suitable to supplement the closet with an automatic pressure-water flushing device with delayed flushing AUZ 3 INV (suitable for the disabled) or any flushing device with a cistern.

Basic technical information
Water inlet: d= 34 - 50 mm
Min. water flow: 70 l/min
Outlet: d= 90 mm
Weight: 27 kg
 
Complete delivery
  • Stainless steel closet
  • Plastic seat
  • Anchoring material
  • Stainless-steel backrest
Tootekood: AZP-AUZ 08 INV ,   Tarneaeg: 3-4 nädalad
2629,00 €
Laost otsas
Antivandaalne valamu + seebidosaator + termostaat + kätekuivati
Antivandaalne valamu + seebidosaator + termostaat + kätekuivati

AUM 026 INV is a stainless steel, partly wall-built in washbasin, containing the combination of a liquid soap dispenser, water tap and hand dryer in a small space. The washbasin is adjusted to be used also by wheelchair persons – it is shallow, completed with handles, the waste is hidden behind the wall. Controlled by durable piezo-pushbuttons, electronically controlled turn-off (the period of water running is settable by the owner). The washbasin is to be mounted through the wall, all technology components are behind the wall, and thus cannot be damaged by users (anti-vandal design).

A wall-hanged version may be supplied to order, or a version without any of the functions (e.g. onlz water plus soap, or water plus dryer). The washbasin is made of AISI 304 stainless steel. A recommended cleaning agent for stainless products maintenance: Würth – preservation (order no. 0893 121 K), cleaning (order no. 893 121 1).
Basic technical information
Power supply: 230 V, 50 Hz
IP protection: IP 55
Dimensions (visible from outside): 800 x 800 x 363 mm
Required thickness of wall: min. 100 mm
Outlet: d = 40 mm
 
Requirements for setting up the construction
  1. Opening in the wal 740 x 740 mm
  2. Prepared el. supply cable 3C x 1,5 s 230 V, 50 Hz
  3. Prepared water outlet according to technical scheme
 
 
Complete delivery
  • Stainless-steel washbasin with handles
  • Electronic hand dryer
  • Electronic soap dispenser
  • Electronic water tap
  • Through-wall frame with bolts
  • Waste with a stink trap
  • 230V / 12V source for the electronics
 
Tootekood: AZP-AUM 026.TV INV ,   Tarneaeg: 3-4 nädalad
4300,00 €
Laost otsas
Automatne kummikute pesur harjaga, 220V, 50Hz
Automatne kummikute pesur harjaga, 220V, 50Hz

automatic washing system for soles with rotary brushes - 230V, 50Hz

 

RMP 02 is a stainless steel sensor-controlled washing system with rotary brushes for wellingtons. A built-in photocell sensor reacts to the user holding the handrail. The electromagnetic valve switches on, opens the water inlet, the brushes start to rotate and the circular jet injection of the disinfecting lotion is carried out. After placing the foot with the wellington on the grid in between the rotary brushes, the sole is cleaned by means of the horizontal brush. There is a CENTRAL/STOP button on the handrail for emergency switch-off.
The washing system is intended for free standing installation on the floor. Imperfections in the floor are balanced out by four adjustable hobs. The construction of the system allows the outlet to be placed above floor level. Large pieces of dirt are collected by a sieve, which can be easily cleaned. The sieve and brush can be taken out without using a tool.
The RMP 02 washing system, with its easy maintenance, is mainly intended for operations where quick removal of mechanical dirt from wellingtons is required.
The canister with disinfecting solution is not part of the delivery.

Package contents

  • body of the washing machine
  • removable grid
  • electronics with photocell
  • rotary brush
  • hand brush
  • jerican holder
  • priming hose
  • adjustable supporting legs
  • central stop button

 

Radius of sensor 0,5 m
Water inlet G 1/2“
Water pressure 0,1 – 1,0 MPa
Outlet G 6/4”
Electricity protection IP 55
Power supply 230 V, 50 Hz
Power requirement 370 W
Water temperature max. 42°C
Weight 41 kg

 

  • Set up water inlet as per picture
  • Set up outlet G 6/4” via effluvial cover
  • Set up cable for power supply – 230 V, 50 Hz

 

Tootekood: AZP-RMP 02 ,   Tarneaeg: 3-5 nädalat
10323,00 €
Laost otsas
Joogifontään AFO04 seinale mehaaniline R/V teras AISI304
Joogifontään AFO04 seinale mehaaniline R/V teras AISI304

Joogifontään AFO04 seinale mehaaniline R/V teras AISI304

AFO 04

suspension drinking fountain

 

AFO 04 is a stainless-steel drinking fountain of a modern design. It is manufactured with a double surface finish: matt bowl (blasted with ballotini) and brushed casing. Thanks to its interesting appearance, it particularly suits public spaces, such as sports facilities, parks, squares, business centres, fitness and wellness centres, but also schools and kindergartens.

Similarly to AFO 01, the drinking fountain is operated with a push valve. Water is flowing while the valve is pushed and for a preset time after its release, in which way the nozzle is rinsed. 

The water inlet is through a flexible hose; siphon trap is made of a flexible coupling. The flexible design of the water inlet and outlet enables variable and trouble-free connection of the fountain as well as its simple dismounting.

The AFO 04 drinking fountain is made from stainless steel of the AISI 304 class; the AFO 04.CL drinking fountain is made from steel of the AISI 316 class.

Package contents

  • stainless steel casing
  • press valve
  • corner valve with filter
  • fixing bar
  • siphon
  • connecting hose
  • anchoring material
Water inlet G 1/2"
Water pressure 2 - 6 Bar (recommended 3 Bar)
Outlet d = 40 mm
Inner dimension of the fountain d = 245 mm
Weight 4 kg
  • Set-up water inlet - pipe G1/2“.
  • Set-up drainage d = 40 mm.

 

 
Tootekood: AZP-AFO04 ,   Tarneaeg: 3-4 nädalad
921,00 €