Elektriline kätekuivati süvitstud ADA Compliant, QuietDry 230М
Kaubamärk:
Ühik: tk
Tarneaeg: 5-6 nädala
Müüja: PEGU OÜ
Olete leidnud õige toote – nüüd on aeg see enda omaks teha.
- ✔ Kvaliteetne toode kiiresti ja mugavalt kätte
- ✔ Turvaline ja läbipaistev ostuprotsess
- ✔ Meie meeskond hoolitseb iga detaili eest
Lisage toode ostukorvi ja jätkake tellimusega – nii on ta varsti juba teie juures!
PEGU.ee – targad valikud inimestele, kes hindavad stiili ja kvaliteeti.
Elektriline kätekuivati süvitstud ADA Compliant, QuietDry 230М
| Width | 11 13/16 Inches |
| Depth | 6 Inches |
| Height | 24 1/16 Inches |
| Opening Width | 10 Inches |
| Opening Depth | 6 Inches |
| Opening Height | 9 7/8 Inches |
| Amps | 4 - 4.4 Amps |
| Hertz | 50 - 60 |
| Phase | 1 |
| Voltage | 208 - 240 Volts |
| Wattage | 1,000 Watts |
| ADA Compliant | Yes |
| Drying Time | 17 Seconds |
| Finish | Stainless Steel |
| Hands Free | Yes |
| Installation Type | Built-In |
| RPM | 8,000 |
| Style | Heated |
Contemporary design, ADA compliant recessed hand dryer. 6” deep drying alcove with a curved back and a ceramic water absorbent surface to capture and evaporate water. Type 304 satin-finish, stainless steel. Dryer delivers a 17-second dry time at a mere 70dBA and a sustainable power rating of 1.0kW
115V AC, 8.5 Amp., 50/60 Hz, 1000 Watts, Single Phase, cULus Listed.
208-240V AC, 4.0-4.4 Amp, 50/60 Hz, 1000 Watts, Single Phase, cULus Listed and CE marked.
-Ülekiire kuivatusaeg
-Minimaalne energiatarve
-minimaalset CO2 heitmeid
-Madalama müratasemega oma kategoorias
-Mootori kiirus on reguleeritav potentsiomeetriga
-Tõhus õhufilter H13HEPA
-Mikroobivaste Biocote kaitsekiht
-Kergesti hooldatav
-ADA-ühindav
-Green Speci nimekirjas
Kuivatuseaeg on 8-15 sek!
1215,00 €
Süvistatav paberidosator
süvistussügavus 150mm
Diameeter 286mm
Mahtuvus 80-100 lehte 85mmx205mm
Koti mõõt 39x28CM
Nähtav osa :
Rõngas :poleeritud kroom, naturaalne messing.
harjatud kroom, harjatud R/V teras või 14 rinevat
värvitooni.
Mahuti materjal :värvitud PC/ABS
298 x 598 x 120 mm
11 l
- Waste bin in robust, germ-reducing and easy-care stainless steel (AISI 304).
- All-stainless steel housing; all corners fully welded, visible surfaces satin finished and brushed.
Further available surfaces: see below. - Equipped with removable mesh basket. Capacity approx. 11 l. Accessible through lockable door with self-closing, flame-retardant disposal flap.
- Also suitable for use as a hygiene waste bin with the optional plastic hygiene bin WP34.
- Keyed alike cylinder lock in corrosion-resistant zinc die-casting.
- Wear parts can be replaced as modules.
- Installation dimensions: 300 x 600 x 110 mm
- Mounting: With eight screws in wall opening through fixing holes in the side walls.
- Delivery includes fixing material.
- Weight (in kg): 5,7
402,60 €
WASTE BIN WP 147
298 x 898 x 220 mm
32 l
- Waste bin in robust, germ-reducing and easy-care stainless steel (AISI 304).
- All-stainless steel housing; all corners fully welded, visible surfaces satin finished and brushed.
Further available surfaces: see below. - Equipped with removable mesh basket. Capacity approx. 32 l. Accessible through front flap with fall protection.
- Installation dimensions: 300 x 900 x 110 mm
- Mounting: With four screws in wall opening through fixing holes in the side walls.
- Delivery includes fixing material.
- Weight (in kg): 11,5
701,50 €
SENSOR DISINFECTANT DISPENSER WP 208E-7
148 x 448 x 120 mm
950 ml tank
- Sensor disinfectant dispenser in robust, germ-reducing and easy-care stainless steel (AISI 316L).
- All-stainless steel housing; all corners fully welded, visible surfaces satin finished and brushed. Further available surfaces: see below.
- With EWAR® eModule touch-free operated disinfectant pump with 950 ml tank.
- Tank with large, lockable refill opning.
- Designed for standard disinfectants.
- Inspection slot to indicate fill level.
- Accessible for refilling through lockable, removable front panel with fall protection.
- Keyed alike cylinder lock in corrosion-resistant zinc die-casting.
- eModule battery-powered with two 1.5 V Baby/LR14 batteries.
Power supply available as an option. - Wear parts and front panel can be replaced as modules.
- Installation dimensions: 150 x 450 x 110 mm
- Mounting: With four screws in wall opening through fixing holes in the side walls.
- Delivery includes fixing material and batteries.
- Weight (in kg): 3,4
549,00 €
