Dimensions: Height 430 mm. Diameter 260 mm.
Broen Lab PP labori valamu 552x400x235 (PxLxK)
Kaubamärk:

Ühik: tk
Tarneaeg: 2-3 nädalad
Lisainfo: info@pegu.ee
KEVAD2022 sisesta sooduskood ostukorvi lehel kupongi lahtrisse!
Sees 492x282 (vajab põhjaklappi 97B0073)
18,00 €
SOS dušš, seinale kinnituv 3/4"
456,00 €
SECURITHERM BIOCLIP thermostatic sink mixer
Ref. H9611P
Sequential: opens and closes with cold water.
Supplied with 2 removable BIOCLIP stainless steel spouts L. 136mm.
Anti-scalding failsafe: immediate shut-off if cold or hot water supply fails.
Securitouch thermal insulation prevents burns.
No risk of cross flow between hot and cold water.
No non-return valves on the inlets.
Scale-resistant sequential thermostatic cartridge.
Temperature control: cold water up to 40°C. Temperature limiter set at 40°C.
Thermal or chemical shocks are possible.
Body and spout with smooth interiors and low water volume.
Flow rate regulated at 7 lpm.
No manual contact thanks to Hygiene control lever L. 146mm.
Mixer with 150mm centres, supplied with in-line STOP/CHECK connectors ideal for hospitals.
Chrome-plated brass body.
TECHNICAL CHARACTERISTICS
SECURITHERM BIOCLIP thermostatic sink mixer
Ref. H9611PConnector | M1/2" |
Technology | SECURITHERM BIOCLIP sequential, Securitouch |
Height | 141mm |
Width | 184mm |
Spout length | 136mm |
Flow rate | 7 lpm |
Temperature limiter | 40°C |
Finish | Chrome-plated brass |
641,00 €
Single valve turret fitting for compressed air with quick release coupling
1-Valve,Turret,1-Hole,Quick Coup.,M30,Hose,CA
2532 056 1021-52B
compressed air, nitrogen, carbon dioxide, argon, helium, low vacuum (1000 to 1 mbar)
Fittings are delivered with a 700mm SPX hose with OD10mm inlet conneciton.
MATERIALS WITH MEDIA CONTACT
Metals: Brass
Plastics: PVDF, SPX (hose)
Sealing: FKM
Lubricant: Perfluoropolyether based
ORDERING INFORMATION
For standard configuration please refer to the item numbers below.
Other options:
- different media
- removable hose nozzle with union nut
- disability-friendly handle (single valve only)
- micro flow headwork (for 2.0 non-burning gases) - high flow headwork (for 2.0 non-burning gases)
- alternative hose inlet connection / without a hose - other inlet options (type, length)
Broen Lab Kraan deioniseeritud vesi S200mm, seinast PVDF
S P E C I F I C AT I O N S
Handle: Metal, BROEN-LAB POLYCOAT powder coated
with media indication according to EN13792
Hose nozzle: Removable/external G3/4 thread, metalHeadwork: Diaphragm type
Opening/closing function: 1 1/2 x 360°Temperature range: 0-65°C
Max. working pressure: 10 bar / 147 psi
Test pressure: 1 x working pressure
Weight: 0.9 kg
MATERIALS WITH MEDIA CONTACT
Metals: Stainless Steel, AISI 316Diaphragm: PTFE
Rubber: EPDM
ORDERING INFORMATION
For standard configuration please refer to the item numbers below.