Käterätikuivati on valmistatud messingist. (brass)

Полотенцесушители выполнены из латуни

Käterätikuivati elektrielemendi kaitse IP67

Käterätikuivati elektrikätikuivatile IP44-IP55

Степень защиты электрического элемента IP67

Степень защиты электрического полотенцесушителя IP44-IP55

Maksimaalne temperatuur 60°C

максимальная температура 60°C

Võimalikud viimistlused Chroom +...%

Возможные покрытия Chroom +...%

Ø 45 x 283 x 155 mm
low pressure

• Single-lever basin tap without waste fitting in robust, germ-reducing and easy-care stainless steel (AISI 303).
• Version: low pressure, suitable for unpressurised tanks. Operating pressure 2–6 bar.
• Solid stainless steel body; visible surfaces satin finished.
  Further available surfaces: see below. 
• High quality ceramic mixer cartridge with adjustable temperature limit setting (scald protection).
• Neoperl® air bubble spray M21 x 1 mm.
• Design height: 283 mm
  Outlet height: 199 mm
  Projection: 98 mm
  Length of lever: 40 mm
• Wear parts can be replaced as modules.
• Installation dimensions: Ø 33-40 mm, surface thickness max. 40 mm
• Mounting: With one counternut. 
• Delivery includes fixing material and three flexible connecting hoses clad in stainless steel.

• Weight (in kg): 2,00

Roheline laserkiir

3 x 360° laserkiirt: horisontaalne, ette vertikaalne, küljele vertikaalne

IP65

Siseruumides tööulatus 30m

Välitingimustes laseri tööulatus 70m detektoriga

Täpsus 0,2 mm/m

Iseloodimise ulatus ±2,5°

Statiivi kinnitus 5/8" ja 1/4"

Komplektis sisaldub:

Magnetkinnitus

Kandekott

Prillid

Li-ion aku

Akulaadija

Sihtplaat

• Three 360° green laser beams, including:
• horizontal
• Side vertical
• Forward vertical
• IP65
• Indoor laser range: 30m (100′)
• Outdoor laser range: 70m (230′) with detector
• Accuracy: 0.2mm/m (0.0002″/”)
• Self-leveling up to ±2.5°
• Manual mode for tilted marking
• Pulse mode
• Tripod ready: 1/4″ and 5/8” thread

Includes

• Multi-functional magnetic mount, Beamfinder™ glasses, laser target, Lithium-ion battery, battery charger and a hard carry case

80 x 298 x 120 mm
400 ml foam soap concentrate

• Foam soap dispenser in robust, germ-reducing and easy-care stainless steel (AISI 316L).
• All-stainless steel housing; all corners fully welded, visible surfaces satin finished and brushed.
  Further available surfaces: see below.
• One-hand operated and non-drip foam soap pump. 
• Designed for standard 400 ml foam soap concentrate. 
• Inspection slot to indicate fill level.
• Accessible for refilling through lockable, hinged housing. 
• Keyed alike cylinder lock in corrosion-resistant zinc die-casting.
• Wear parts can be replaced as modules.
• Mounting: With two screws through key holes and one optional anti-theft hole in the back wall. 
• Delivery includes fixing material and first fill with foam soap concentrate.

• Weight (in kg): 2,4