Dealabie dosaator seebi/hydroalcoholic gel 1 L kontaktivaba sensoriga R/V teras poleeritud 512066P

Haceka Kosmos kroom vedelseebidosaator seinale, metallist 1208550

5,3x10x17 cm

Haceka Kosmos kroom vedelseebidosaator seinale, metallist

Haceka Kosmos: Modernne Disain ja Hollandi Kvaliteet

Haceka Kosmos on üks populaarsemaid sarju PEGU.ee laias vannitoa ja WC aksessuaaride valikus. See ühendab endas minimalistliku disaini, funktsionaalsuse ja 1924. aastast pärineva Hollandi kvaliteedi. Kosmos-sarja iseloomustavad puhtad jooned ja ümarad vormid, mis sobivad ideaalselt nii modernsesse kodusesse vannituppa, hotellitubadesse kui ka suurtesse avalikesse projektlahendustesse.

Kvaliteetne ZAMAK-materjal ja Kroomviimistlus

Erinevalt odavatest plastikust alternatiividest on Haceka Kosmos tarvikud valmistatud ZAMAK-materjalist (tugev tsingisulam), mis annab toodetele meeldiva raskuse ja stabiilsuse. Kvaliteetne kroomviimistlus tagab kõrge korrosioonikindluse niisketes ruumides ja annab aksessuaaridele luksusliku läike, mida on lihtne hooldada ja puhastada.

Nutikas Paigaldus: Kruvidega või Ilma Puurimiseta

Haceka on loonud lahenduse, mis säästab teie aega ja seinapindu. PEGU.ee eksperdid kinnitavad, et kõik Kosmos sarja tooted on paigaldatavad kahel viisil:

• Traditsiooniline paigaldus: Komplektis on kaasas vajalikud kinnitid (kruvid ja düüblid) seinale kinnitamiseks.
• Puurimisvaba paigaldus: Tooteid saab paigaldada seinale kasutades spetsiaalset Haceka HangOn liimi (ei ole komplektis). See on ideaalne lahendus, kui te ei soovi kahjustada uusi keraamilisi plaate või üüripinna seinu.

Valige Haceka Kosmos tarvikud PEGU.ee e-poest, kui otsite vannituppa ajatut stiili ja töökindlust, mis kestab aastaid.

80 x 298 x 120 mm
400 ml foam soap concentrate

• Foam soap dispenser in robust, germ-reducing and easy-care stainless steel (AISI 316L).
• All-stainless steel housing with rounded vertical corners. Visible surfaces satin finished and brushed.
  Further available surfaces: see below.
• One-hand operated and non-drip foam soap pump. 
• Designed for standard 400 ml foam soap concentrate. 
• Inspection slot to indicate fill level.
• Accessible for refilling through lockable, hinged housing. 
• Keyed alike cylinder lock in corrosion-resistant zinc die-casting. 
• Wear parts can be replaced as modules.
• Mounting: With four screws through key holes and one optional anti-theft hole in the back wall. 
• Delivery includes fixing material and first fill with foam soap concentrate.

• Weight (in kg): 2,40

Vedelseebidosaator teras Mediclinics must 1,5L DJ0031B

Seebidosaator seinale

Vedelseep

Matt musta värviga

Kiir tarne PEGU e-poest

Automatne kummikute pesur harjaga, 220V, 50Hz roostevaba teras AZP Brno RMP 02

automatic washing system for soles with rotary brushes - 230V, 50Hz

RMP 02 is a stainless steel sensor-controlled washing system with rotary brushes for wellingtons. A built-in photocell sensor reacts to the user holding the handrail. The electromagnetic valve switches on, opens the water inlet, the brushes start to rotate and the circular jet injection of the disinfecting lotion is carried out. After placing the foot with the wellington on the grid in between the rotary brushes, the sole is cleaned by means of the horizontal brush. There is a CENTRAL/STOP button on the handrail for emergency switch-off.
The washing system is intended for free standing installation on the floor. Imperfections in the floor are balanced out by four adjustable hobs. The construction of the system allows the outlet to be placed above floor level. Large pieces of dirt are collected by a sieve, which can be easily cleaned. The sieve and brush can be taken out without using a tool.
The RMP 02 washing system, with its easy maintenance, is mainly intended for operations where quick removal of mechanical dirt from wellingtons is required.
The canister with disinfecting solution is not part of the delivery.

Package contents

• body of the washing machine
• removable grid
• electronics with photocell
• rotary brush
• hand brush
• jerican holder
• priming hose
• adjustable supporting legs
• central stop button

• Set up water inlet as per picture
• Set up outlet G 6/4” via effluvial cover
• Set up cable for power supply – 230 V, 50 Hz