Delabie Be-line invatugi dušilift d35MM L1050mm Antracite aluminim
Kaubamärk:
Ühik: tk
Tarneaeg: 14-21 päeva
Müüja: PEGU OÜ
✅ Juunikuu eripakkumine
Kasuta ostukorvis koodi PEGU-JUUNI2025 ja saa soodustust toodetele, mis ei kuulu teistesse kampaaniatesse.
✅ Pakkumine kehtib kuni 30. juunini.
PEGU.ee – tark valik kvaliteeti hindavale ostjale.
Be-line® anthracite shower grab bar with sliding shower head holder
Ref. 511946C
Be-line® straight bar Ø 35mm with sliding shower head holder for people with reduced mobility.
Can be used as a vertical grab bar and a shower head rail for showers or baths.
Metallised anthracite aluminium sliding shower head holder with ergonomic locking ring.
Possible to add a sliding soap dish (order separately).
Aluminium tube thickness 3mm. Solid aluminium fixing points.
Rounded profile Ø 35mm with ergonomic flat front face that prevents rotation for an optimal grip.
Metallised anthracite powder-coated finish provides a good visual contrast with the wall.
Uniform surface for easy maintenance and hygiene.
38mm gap between the bar and the wall: minimal space prevents the forearm passing between the barand the wall, reducing the risk of fracture in case of loss of balance.
Concealed fixings.
Supplied with stainless steel screws Ø 8 x 70mm for concrete walls.
Height: 1,050mm.
Tested to over 200kg. Maximum recommended user weight: 135kg.
Technical features
Be-line® anthracite shower grab bar with sliding shower head holder
Ref. 511946C
| Height | 1,050mm |
|---|---|
| Width to the wall | 38mm |
| Thickness | 3mm |
| Finish | Metallised anthracite powder-coated aluminium |
Failid
Mezzo vannikäepide kroom
37,00 €
Käetugi 710 mm, jalaga ületõstetav teras valge
Käetugi 710mm jalaga ületõstetav
d 32mm
toru paksus 1,5mm
Pelavajutav äärikukate d 85mm
215,00 €
satiin R/V teras
150,47 €
Käetugi 738mm ületõstetav
R/V teras AISI304 harjatud
d 32mm
toru paksus 1,5mm
Pelavajutav äärikukate d 85mm
225,00 €
General description
-
Wall-floor grab bar, with three support points, made of a diameter of 32 mm AISI 304 stainless steel tube, bent in an "L" shape at 90o and with a 32mm diameter lateral arm, welded on the lower part of the grab bar and also bent at 90°.
-
With snap flange covers that conceal the installation screws, improving the aesthetics of the bars once installed on the wall.
-
These grab bars offer a great safety and comfort to the user, helping to make the bathroom much safer for the elderly or those with reduced
mobility. Models suitable for public use.
-
Well suited for keeping bathrooms and public enclosures barrier-free.
-
Highest durability and great resistance to rusting.
-
Optionally, these grab bars can be electrically isolated, installing the electrical isolation kit code KA0020.
-
Supplied with plugs and screws to fix the bar to a brick wall.
Components and materials
-
BSD020C: right hand grab bar made of AISI 304 stainless steel tube, bright finish.
-
BSI020C: left hand grab bar made of AISI 304 stainless steel tube, bright finish.
-
BSD020CS: right hand grab bar made of AISI 304 stainless steel tube, satin finish.
-
BSI020CS: left hand grab bar made of AISI 304 stainless steel tube, satin finish.
-
TUBING: made of a 32 mm diameter tube, seamless construction. The bending process guarantees the uniformity of the diameter along the bends.
-
CONCEALED MOUNTING FLANGE: three units made of AISI 304 stainless steel, 3 mm thick. Incorporates two Ø 6.5 mm screw holes for wall mounting.
-
SNAP FLANGE COVER: three units made of AISI 304 stainless steel, 0.8 mm thick and Ø 82 mm. Each cover snaps over mounting flange to conceal mounting screws.
-
214,00 €
