Delabie dušialus 700x700mm h60mm roostevabast terasest 150100
Kaubamärk:
Ühik: tk
Tarneaeg: 14-21 päeva
‼️ Kasuta promokoodi KEVAD2026 ostukorvis ja saa soodustust – ainult täna!
▼ Loe edasi: ...
✅ Populaarsed tooted Tallinna laos kohe olemas — tarneaeg 1–3 päeva või tule ise järele.
✅ Kui toode on tellimisel, uuri lähemalt — saame tihti pakkuda oodatust kiiremat tarnet: info@pegu.ee
✅ Kõikidele toodetele garantii 2 aastat ja 14‑päevane tagastusõigus.
✅ Automaatne arve e‑postile. E‑arve soovijatel palume lisada märge kommentaaridesse.
ℹ️ Hind sisaldab käibemaksu.
Delabie dušialus 700x700mm h60mm roostevabast terasest 150100
DESCRIPTION
Recessed shower tray
Ref. 150100
Recessed shower tray, 700 x 700mm.
Bacteriostatic 304 stainless steel.
Polished satin finish.
Stainless steel thickness: 1.2mm.
One-piece pressed shower tray, seam-free for easy maintenanceand better hygiene.
Rounded internal corners for improved safety in the shower.
Drainage slope.
Supplied with 1 ½" waste.
Non-slip surface.
CE marked. Complies with European standard EN 14527.
Weight: 5.5kg.
TECHNICAL FEATURES
Recessed shower tray
Ref. 150100
| Depth | 60mm |
|---|---|
| Length | 700mm |
| Width | 700mm |
| Thickness | 1.2mm |
| Finish | 304 polished satin stainless steel |
Failid
Kätepaberidosaator Mediclinics DT2106CS roostevaba teras AISI304 harjatud
Mediclinics DT2106CS on kõige populaarsem kätepaberidosaator Eestis, sobides ideaalselt kasutamiseks avalikes ruumides, nagu koolid, lasteaiad, haiglad, kaubanduskeskused ja kontorid. Elegantne harjatud AISI 304 roostevabast terasest korpus sobib igasse interjööri ning tagab seadme vastupidavuse ja lihtsa hoolduse.
Tehnilised andmed:
-
Materjal: AISI 304 harjatud roostevaba teras
-
Korpuse paksus: 0,8 mm
-
Mõõdud: mahutab C- ja Z-volditud rätikuid mõõtmetega kuni 260x100 mm
-
Mahutavus: 400–600 paberit
-
Kaal: 1,8 kg
Dosaatori kompaktne, kuid mahukas disain võimaldab selle paigaldada ka kitsamatesse ruumidesse, tagades samas pika täitmisvahemiku ja mugava kasutamise.
✅ Tippvalik professionaalidele, kes otsivad vastupidavat ja hügieenilist lahendust.
110,00 €
Koristaja valamu Intra U2 490x390x260 INTRA
Bucket sink in stainless steel for wall mounting. Supplied with stainless steel wall panel, supporting bracket and 3 1/2" x 2" grated waste, and reducer from 2" - 1 1/2".
Damixa valamusegisti bideedušiga Pine 1703000
Damixa valamusegisti bideedušiga Pine
1703000
Pine
Valamusegisti käsidušiga
- Artikli number 17030
- Viimistlused Kroom
- Standardfunktsioonid
- Keraamiline tööorgan.
- Põletuskaitsega
- Veesäästu funktsioon Eco-Save.
- Külm start.
- Ilma põhjaklapita.
- Kummiaeraator - lihtne puhastada.
189,05 €
Kätepesuvalamu roostevabast terasest Endura
INTRA ED1
Kätepesuvalamu Endura ED1
Automatne kummikute pesur harjaga, 220V, 50Hz roostevaba teras AZP Brno RMO 02
RMO 02
automatic washing system for wellingtons
RMO 02 is a stainless steel sensor-controlled washing system with rotary brushes for wellingtons. A built-in photocell sensor reacts to the user holding the handrail. The electromagnetic valve switches on, opens the water inlet, the brushes start to rotate and the circular jet injection of the disinfecting lotion is carried out. After placing the foot with the wellington on the grid in between the rotary brushes, the sole is cleaned by means of the horizontal brush and the leg portion is cleaned by means of two vertical brushes. The system is automatically switched off when the user releases the handrail. There is a CENTRAL/STOP button on the handrail for emergency switch-off.
The washing system is intended for free standing installation on the floor. Imperfections of the floor are balanced out by four adjustable hobs. The construction of the system allows the outlet to be placed above the floor level.
The RMO 02 washing system, with its easy maintenance, is mainly intended for operations where quick removal of mechanical dirt from wellingtons is required.
The canister with disinfecting solution is not part of the delivery.
Package contents
- body of the washing machine
- removable grid
- electronics with photocell
- three rotary brushes
- jerican holder
- priming hose
- adjustable supporting legs
- central stop button
| Radius of sensor | 0,7 m |
| Water inlet | G 1/2“ |
| Water pressure | 0,1 – 1,0 MPa |
| Outlet | G 6/4” |
| Electricity protection | IP 55 |
| Power supply | 230 V, 50 Hz |
| Power requirement | 370 W |
| Water temperature | max. 42°C |
| Weight | 95 kg |
- Set up water inlet as per picture
- Set up outlet G 6/4” via effluvial cover
- Set up cable for power supply – 230 V, 50 Hz
