Tootegrupid
Blogi Uudised

Delabie KOMPACT Combi HW/CW WC+valamu paremal põranda antivandaalne R/V teras AISI304 161700

Tootekood: DE-161700
Kaubamärk:
Ühik: tk
Tarneaeg: 4-6 nädalad
Hind: 4535,00 €
4081,50 €
Kuumakse alates: 346,93 €
Kogus: - +

Delabie KOMPACT Combi HW/CW WC+valamu paremal põranda antivandaalne R/V teras AISI304 161700

Combi KOMPACT HW/CW - washbasin and floor-standing WC pan 
Ref. 161700

Combination unit: washbasin and floor-standing left hand WC pan with recessed toilet roll holder.
Wall-mounted installation with 3 access panels, 2 on the sides and 1 on the top, with theft prevention TORX security screws.
Bacteriostatic 304 stainless steel.
Polished satin finish.
Stainless steel unit thickness: 2mm.
Rounded corners and edges for improved safety.
Smooth surface for easy cleaning.
Suitable for prisons, police stations, etc.
WC pan is completely welded to washbasin, no screws: makes cleaning easier and prevents concealment of objects.
Washbasin equipped with time flow tap: stainless steel tamperproof push-button and anti-blocking system, 7-second time flow, M½".
Available with 2 buttons cold water/mixed water.
WC equipped with time flow flush valve, 7-second time flow, M¾".
Water inlet: washbasin M½", WC M¾".
Recessed horizontal water outlet: Ø 100mm.
Supplied with washbasin trap.
Easy to install: only one water outlet for both washbasin and WC, water inlet and outlet already connected.
Weight: 36kg.

 

TECHNICAL FEATURES 

Combi KOMPACT HW/CW - washbasin and floor-standing WC pan 
Ref. 161700

Height 1000mm
Length 735mm
Width 725mm
Thickness 2mm
Finish Polished satin 304 stainless steel

Failid

Sarnased tooted

Roostevaba teras WC pott Delabie Monobloco S21, R/V AISI304 matt 110390

DESCRIPTION

MONOBLOCO S21 WC pan with cistern 
Ref. 110390

Floor-standing WC pan with dual flush cistern 3L/6L, 370 x 815 x 620mm. 
Bacteriostatic 304 stainless steel. Polished satin finish.
Stainless steel thickness: 1.5mm. 
One-piece pressed WC bowl, seam-free for better hygiene. 
WC bowl surface is polished with rounded edges for easy cleaning. 
Concealed perimetral flushing rim. Water supply can be recessed from below or exposed from the side (right/left). 
Recessed horizontal or vertical waste outlet. Supplied with PVC pipe. 
Pre-drilled holes for fixing the toilet seat. Supplied with stainless steel blanking caps when installed without toilet seat lid. 
Quick to install: 2 access panels with theft prevention TORX security screws. 
CE marked. Complies with European standard EN 997 for 4L flush.
Weight: 21kg.
10-year warranty.

 

TECHNICAL FEATURES 

MONOBLOCO S21 WC pan with cistern 
Ref. 110390

Height 815mm
Length 620mm
Width 370mm
Thickness 1.5mm
Finish 304 polished satin stainless steel
Tootekood: DE-110390 ,   Tarneaeg: 7 nädalad ,   Viimistlus:
2298,60 € (10%)
2554,00 €

Liivapüüdur valamule SAND-02 Elcee 220, 3,5L, R/V teras, AISI304

INTRA

Kasutusjuhend:

Liivapüüdur SAND-02 Elcee 220, 3,5L, roostevaba teras, AISI304

Liivapüüdur SAND-02 Elcee 220 on mõeldud liiva filtreerimiseks veest ning selle maht on 3,5 liitrit. Seade on valmistatud roostevabast terasest (AISI304) ja on ideaalne paigaldamiseks otse kraanikausi või valamualuse alla.

Paigaldamine:
Liivapüüdur on lihtne paigaldada otse kraanikausi või valamualuse alla, kasutades selleks sobivaid kinnitusvahendeid.

Kasutamine:
Liiv ja mustus kogunevad seadme alumisse kaussi. Seadme efektiivse töö tagamiseks on vajalik kaussi regulaarselt tühjendada.

Hooldus:
Kauss on kinnitatud korpuse külge kahest küljest kinnitustega. Kaussi puhastamiseks eemaldage see kinnitustest, tühjendage ja vajadusel puhastage.

Üldmõõtmed millimeetrites: Ø174 x 235

Sissevoolu mõõtmed millimeetrites: 1,5"

Väljavoolu mõõtmed millimeetrites: 1,5"

Materjal: AISI 304

Materjali paksus millimeetrites: 1,5

Kogukaal kilogrammides: 2,50

 

Wash trough acc. Separator SAND-02

Description

The sand catcher has a capacity of 3,5 litres and is ideal for filtering sand from water.
It is easy to mount directly under a washbasin or a wash trough.

The sand catcher is delivered with a flexible outlet that will enable straight or bent installation possibilities.

Material: Stainless steel AISI 304

 

Overall dimension in mm Ø174 x 235

Inlet dimension in mm 1.5"

Outlet dimension in mm 1.5"

Material AISI 304

Material thickness in mm 1.5

Gross weight in kg 2.50

Tootekood: I-SAND-02 ,   Tarneaeg: 3-4 nädalad ,   Viimistlus:
475,00 €

Antivandaalne valamu + seebidosaator + termostaat + kätekuivati AZP Brno UM 026.TV INV

AUM 026 INV is a stainless steel, partly wall-built in washbasin, containing the combination of a liquid soap dispenser, water tap and hand dryer in a small space. The washbasin is adjusted to be used also by wheelchair persons – it is shallow, completed with handles, the waste is hidden behind the wall. Controlled by durable piezo-pushbuttons, electronically controlled turn-off (the period of water running is settable by the owner). The washbasin is to be mounted through the wall, all technology components are behind the wall, and thus cannot be damaged by users (anti-vandal design).

A wall-hanged version may be supplied to order, or a version without any of the functions (e.g. onlz water plus soap, or water plus dryer). The washbasin is made of AISI 304 stainless steel. A recommended cleaning agent for stainless products maintenance: Würth – preservation (order no. 0893 121 K), cleaning (order no. 893 121 1).

Basic technical information
Power supply: 230 V, 50 Hz
IP protection: IP 55
Dimensions (visible from outside): 800 x 800 x 363 mm
Required thickness of wall: min. 100 mm
Outlet: d = 40 mm
 
Requirements for setting up the construction
  1. Opening in the wal 740 x 740 mm
  2. Prepared el. supply cable 3C x 1,5 s 230 V, 50 Hz
  3. Prepared water outlet according to technical scheme
 
 
Complete delivery
  • Stainless-steel washbasin with handles
  • Electronic hand dryer
  • Electronic soap dispenser
  • Electronic water tap
  • Through-wall frame with bolts
  • Waste with a stink trap
  • 230V / 12V source for the electronics
 
Tootekood: AZP-AUM 026.TV INV ,   Tarneaeg: 3-4 nädalad ,   Viimistlus:
4370,49 €

Antivandaalne R/V teras piezo dušisi nupp, eelsegatud veele,  ilma el.adaptorita AZP Brno AUS 11

 
Antivandaalne R/V teras piezo dušisi nupp, eelsegatud veele,  ilma el.adaptorita
 
 

AUS 11

Pressure button-controlled shower for heat regulated water

 

 

   
 
 
 

AUS 11 is a new type of shower fitting for single shower control. The fitting is designated for premixed water – with one water inlet and shower outlet elbow. Water is released and closed by an anti-vandal pressure button connected to electronics and an electromagnetic valve. The fitting is covered by a rust-free anti-vandal cover to prevent damage. 

The mounting system has been designed so as to make removing the cover without using tools impossible with no bolt or screw being visible. The cover can be "pushed into" the wall level even if the mount box has been walled to an incorrect depth. 

AUS 11 is identical to AUS 1P with a different design and very resistant cover sheet. 

Electronics can work in two modes: 

1) The button works on the START/STOP basis – water release/closing. If the water is not turned off upon the time adjusted by the user or manager (e.g. 20 seconds), the electronic system itself instructs water stopping. The user must press again to start water running. This significantly saves water as the user reduces the showering time. 

2) The button works on the START/STOP basis. After the time adjusted by the manager (e.g. 3 minutes) expires there is a forced break when water cannot be released. During this time, the user is forced to leave the shower or wait. This prevents needless showering – water wasting. 

 

 
Basic technical information
Water input: G 1/2“
Water pressure: 1 - 10 Bar (0,1 – 1,0 MPa)
Time of water flow: 10 s – 42,5 min in mode 1
  0 s - 42,5 min in mode 2
Power supply: 12 V, 50 Hz
Power requirement: 6 VA
Source of power supplz: ZAC 1/20 (max. 3× AUS 11)
  ZAC 1/50 (max. 8× AUS 11)
Weight: 2,0 kg
 
 
Requirements for setting up the construction
  1. Water installation set up as per picture
  2. Set-up alcove 150 x 75 mm for installation casket
  3. Set-up cable for power supply – 12 V, 50 Hz from source of power supply ZAC
 
 
Complete delivery
  • installation casket
  • input and output bolting
  • electromagnetic valve
  • spherical valve
  • covering metal plate with piezo button
  • electronics
 
 
Made to order
  • SP 1 – shower arm with water flow of 9 l/min
  • SP 2 – shower arm with water flow of 7 l/min
  • SP 3 – shower arm with water flow of 7 l/min
  • ZAC - source of power supply 12V, 50Hz
 
 
Figure
 
 
A - water inlet G 1/2"
C - electricity supply cable 12 V, 50 Hz 
G - water outlet into shower armG 1/2"
 
 
 
 
Download information about the product
AUS 11 data for projectants - ( 84 kB )
 
Tootekood: AZP-AUS 11 ,   Tarneaeg: 3-4 nädalad ,   Viimistlus:
381,15 €

Delabie utiliseerimise põranda valamu Vidoir XL P R/V teras AISI304 182070

Floor-standing XL P disposal sink 
Ref. 182070

Floor-standing disposal sink. 
Bacteriostatic 304 stainless steel. 
Polished satin finish. 
Stainless steel thickness: 1.5mm. 
Smooth surface is easy to clean. 
Concealed perimetral flushing system. 
Horizontal or vertical water inlet: Ø 55mm. 
Horizontal or vertical water outlet: Ø 100mm. 
Supplied with PVC pipe. 
Concealed drainage: shrouded sink. 
Quick and easy to install: 2 access panels 
with theft prevention TORX security screws. 
Hinged stainless steel bucket grid. 
Weight: 16kg. 

 

 

TECHNICAL FEATURES 

Floor-standing XL P disposal sink 
Ref. 182070

Height 450mm
Length 445mm
Width 410mm
Thickness 1.5mm
Finish 304 polished satin stainless steel
Tootekood: DE-182070 ,   Tarneaeg: 14-21 päeva ,   Viimistlus:
2021,40 € (10%)
2246,00 €

PEGU.ee — Iga segisti ja aksessuaar on valitud isikliku teadmise ja kogemusega. Teid nõustab **sanitaartehnika peaspetsialist, 25+ aastat kogemust.** Kontakt: info@pegu.ee · +372 515 0681