Delabie KOMPACT Combi WC+valamu paremal põranda antivandaalne R/V teras AISI304
Kaubamärk:
Ühik: tk
Tarneaeg: 4-6 nädalad
Müüja: PEGU OÜ
Kasuta sooduskoodi ja saa soodustust tootele, mis ei osale muudes Maikuu kampaaniates!
✔ Allahindlus ainult Mai kuu jooksul – kiirusta!
✔ Kvaliteetne toode mugavalt ja turvaliselt otse koju
✔ Professionaalne teenindus ja läbipaistev ostukeskkond
Lisa toode ostukorvi, sisesta seal kood PEGU-KEVAD2025 ja saa soodustus toodetele, mis ei kuulu teistesse sama perioodi kampaaniatesse.
Ainult mais – kasuta võimalust, enne kui kampaania lõpeb!
PEGU.ee – tark valik neile, kes hindavad disaini, kvaliteeti ja nutikat ostlemist.
KOMPACT washbasin and floor-standing WC combination
Ref. 160700
Combination unit: washbasin and floor-standing WC pan on left sidewith recessed toilet roll holder.
Wall-mounted installation with 3 access panels, 2 on the sidesand 1 on the top with theft prevention TORX security screws.
Bacteriostatic 304 stainless steel.
Polished satin finish
Stainless steel unit thickness: 2mm.
Rounded corners and edges for improved safety.
Smooth surface for easy cleaning.
Suitable for prisons, police stations, etc.
WC pan is completely welded to washbasin, no screws:
makes cleaning easier and prevents concealment of objects.
Washbasin equipped with time flow tap: stainless steel tamperproofpush-button and anti-blocking system, 7 second time flow, M1/2".
WC equipped with time flow flush valve, 7 second time flow, M3/4".
Water inlet: washbasin M1/2", WC M3/4".
Recessed horizontal water outlet: Ø 100mm.
Supplied with washbasin siphon.
Easy to install: only one water outlet for both washbasin and WC,water inlet and outlet already connected.
Weight: 36kg.
[Formerly ref: 0610030007]
TECHNICAL FEATURES
KOMPACT washbasin and floor-standing WC combination
Ref. 160700
| Height | 1000mm |
|---|---|
| Length | 735mm |
| Width | 725mm |
| Thickness | 2mm |
| Finish | 304 polished satin stainless steel |
Failid
FRAJU wall-mounted washbasin
Ref. 120430
Wall-mounted washbasin, 540x480mm.
Bacteriostatic 304 stainless steel.
Polished satin finish.
Stainless steel thickness: 1.2mm for the bowl and 1.5mm for surround.
Rounded edges prevent injury.
Without tap hole.
Supplied with 1¼" waste.
Without overflow.
Supplied with fixing elements.
CE marked. Complies with European standard EN 14688.
Weight: 4.65kg.
> Working pressure : 1 to 5 bar
> Flow : 6 l/min at 3 bar - 4-position flow adjustment device Anti-water-hammering design
> Flow time : 15 seconds (± 5 sec.)
> Hydraulic supply : In-line water inlet M G 1/2" Inlet and outlet Cold water
> Thermal resistance : Resistant to a temperature of 75°C for 30 minute thermal shock
> Security : Patented anti-blocking "S" system to avoid the water to flow continuously
> Delivered with : 1 Cross-partition control (1 to 200 mm thick) 1 Short wall spout (Non-rotating fixing) 87 mm 1 Closing tap with S anti-blocking system 1 stop valve M 1/2" (15x21) / M 1/2" (15x21) with quick couplings (12x14 mm) Instruction manual
> Standards & approvals : Brass body in accordance with EN 1982, EN 12164, EN 12156 Molded chrome-plated body in accordance with EN 12540 200-hour neutral salt spray resistant (NSS) in accordance with ISO 922
327,00 €
TECHNICAL FEATURES
TEMPOSTOP time flow tap
Ref. 741943
| Connector | M1/2" |
|---|---|
| Technology | Time flow |
| Length | 200mm |
| Spout length | 75mm |
| Flow rate | 3 lpm |
TEMPOSTOP time flow tap
Ref. 741943
Cross wall time flow tap with swivel spout :
Time flow ~7 sec.
Flow rate pre-set at 3 lpm at 3 bar, can be adjusted from 1.5 to 6 lpm.
Tamperproof scale-resistant flow straightener.
Solid chrome-plated brass body M1/2".
Control ≤ 200mm and spout ≤ 230mm cut-size.
Anti-rotating pin and back-nut. AB anti-blocking system.
AB anti-blocking system: water will flow only when the push-button is
Wall-mounted CANAL wash trough
Ref. 121250
Wall-mounted wash trough for 2 posts.
Bacteriostatic 304 stainless steel.
Polished satin finish.
Stainless steel thickness: 1mm for the bowl, 1.5mm for surround and fixing brackets.
Easy to install: no joint concealers to install, lightweight wash trough.
Drainage on the right.
With 2 tap holes Ø 22mm.
Supplied with 1½" waste.
Without overflow.
Supplied with fixing brackets and fixings.
CE marked. Complies with European standard EN 14296.
Weight: 8.8kg.
Option to add a bacteriostatic 304 stainless steel splashback (ref. 100250).
Kirurgiline valamu madala pritsmekaitsega "Hygiene+" 3 töökohta 2100mm RST AISI304
Kirjeldus:
Kirurgiline valamu Ref. 187020 on loodud spetsiaalselt haiglate ja hooldusasutuste vajaduste jaoks. Selle madal pritsmekaitse (75 mm) ja "Hygiene+" disain tagavad suurepärase hügieeni ja lihtsa puhastamise, vähendades bakterite arenguks sobivaid alasid. Valamu on valmistatud bacteriostatic 304 roostevabast terasest, sileda pinnaga ja ümarate servadega, et puhastamine oleks kiire ja tõhus.
Peamised omadused:
- Seinakinnitusega disain
- Madal pritsmekaitse: 75 mm
- "Hygiene+": varjatud äravool, bakterite arengualade vähendamine
- Sile pind ja ümarad servad lihtsaks puhastamiseks
- Valmistatud bacteriostatic 304 roostevabast terasest
- Paksus: 1,2 mm
- Kaks töökohta, ilma segistiaukudeta
- Drenaaž paremal, ilma ülevooluta
- Mõõdud: kõrgus 645 mm, laius 400 mm, pikkus 2,100 mm
- Kaal: 37,6 kg
- CE-sertifikaat, vastab EN 14296 standardile ja HTM64 juhistele
Surgical scrub-up trough with low upstand
Ref. 187020
Wall-mounted surgical scrub-up trough with 75mm upstand.
Suitable for hospitals and healthcare facilities.
Bacteriostatic 304 stainless steel. Polished satin finish. Stainless steel thickness: 1.2mm.
Length 2,100mm, 3 services. Without tap hole.
Smooth surface and rounded inside edges for easy cleaning.
"Hygiene+": reduces niches where bacteria can develop, concealed trap, easy to clean.
Drainage on the right. Without overflow. Supplied with fixing elements.
Weight: 37.6kg.
