Delabie kontaktivaba elektronik segisti H170mm BINOPTIC MIX 6V 488MCHLH15
Kaubamärk:
Ühik: tk
Tarneaeg: 14-21 päeva
‼️ Kasuta promokoodi TALV2026 ostukorvis ja saa soodustust – ainult täna!
✅ Populaarsed tooted Tallinna laos kohe olemas — tarneaeg 1–3 päeva või tule ise järele.
✅ Kui toode on tellimisel, uuri lähemalt — saame tihti pakkuda oodatust kiiremat tarnet: info@pegu.ee
✅ Kõikidele toodetele garantii 2 aastat ja 14‑päevane tagastusõigus.
✅ Automaatne arve e‑postile. E‑arve soovijatel palume lisada märge kommentaaridesse.
ℹ️ Hind sisaldab käibemaksu.
Delabie kontaktivaba elektronik segisti H170mm BINOPTIC MIX 6V 488MCHLH15
BINOPTIC MIX electronic mixer
Ref. 488MCHLH15
Deck-mounted electronic basin mixer:
Independent IP65 electronic control unit.
123 6V Lithium batteries.
Flow rate pre-set at 3 lpm at 3 bar, can be adjusted from 1.5 - 6 lpm.
Scale-resistant flow straightener.
Adjustable duty flush (pre-set flush 60 seconds every 24 hours after last use).
Active, infrared presence detection, sensor at the end of the spout optimises detection.
Chrome-plated brass body.
PEX flexibles with filters and solenoid valves Ø 15mm.
Fixing reinforced by 2 stainless steel rods.
Anti-blocking security.
Spout with smooth interior and low water volume (reduces bacterial development).
Side temperature control with adjustable maximum temperature and ergonomic LH lever.
Drop height 170mm for semi-recessed washbasins.
Suitable for people with reduced mobility.
TECHNICAL FEATURES
BINOPTIC MIX electronic mixer
Ref. 488MCHLH15
| Supply | 6V batteries |
|---|---|
| Connector | M1/2'' Ø 15 |
| Technology | Electronic |
| Drop height | 170mm |
| Spout length | 175mm |
| Flow rate | 3 lpm |
Failid
Delabie valamu pool uputatud QUADRA 380x380, R/V teras AISI304 120650
Semi-recessed QUADRA washbasin
Ref. 120650
Semi-recessed washbasin, 380x380mm.
Suitable for use with wall-mounted or extended mixer/tap.
Basin internal diameter: 310mm.
Cutout diameter: 310mm.
Stainless steel thickness: 1.2mm.
Polished satin finish.
Stainless steel thickness: 1.2mm.
One-piece, seam-free pressed bowl.
Rounded edges prevent injury.
Supplied with 1¼" waste.
Without overflow.
CE marked. Complies with European standard EN 14688.
Weight: 3kg.
TECHNICAL FEATURES
Semi-recessed QUADRA washbasin
Ref. 120650
| Height | 130mm |
|---|---|
| Length | 380mm |
| Width | 380mm |
| Thickness | 1.2mm |
| Finish | Polished satin 304 stainless steel |
Damixa dušiotsik Kudos Plus d120mm Eco-Save 5 pihustusviisi käsidušš kroom
7665900
106,72 €
Kranikaussi segisti isesulguv, 15sek 3bar, kroom PRESTO 28610
Valamusegisti, segisti isesulguv, 15sek 3bar, kroom PRESTO
28610
Vajutava nupuga segisti
P 400 S BC
Presto
kroom
15 sek. töötsükkel 3 bar
3-6 l/min
Nicolazzi valamusegisti. P.M.Blanc käepide, Kuld 1432 GO78
Valamusegisti
P.M.Blank 78
Kuld GO
Dušpaneel PRESTO DL400SE eelsegatud veele, 30 sek 3bar, alumiinium stop kraaniga sirge 1/2" 27400
27400
Душевая панель PRESTO DL400SE на смешанную/холодную воду, 30 sek 3bar, алюминий стоп кран 1/2"
Vajutava nupuga duššipaneel
DL400SE
eelsegatud vesi
Presto
30 sek. töötsükkel 3 bar
Range: Timed flow single tap for shower
Ref: 27400 - PRESTO DL 400 SE® single tap with straight stop valve
> Working pressure :
1 to 5 bar
> Flow :
8 l/min at 3 bar with integrated flow limiter (+ additional 6l/mn limiter) Anti-water-hammering design
Fixed shower head with anti-limescale spikes
> Flow time :
30 seconds (± 5 sec.)
> Hydraulic supply :
G 1/2" (15x21) Top water inlet with straight stop valve For cold or premixed water
> Material and colour finish :
Injected molded metal body and cover
Extruded cover in aluminium (magnesium-silicon alloy 6060)
> Thermal resistance :
Resistant to a temperature of 75°C for 30-minute-thermal-shocks
> Security :
Patented anti-blocking "S" system to avoid the water to flow continuously
> Delivered with :
VBA screws and nylon plugs Additional 6l/mn limiter
M G 1/2" - FG3/4" stop valve and filter Instruction manual
> Standards & approvals :
Acoustic class I
Molded chrome-plated body in accordance with EN 12540
200-hour neutral salt spray resistant (NSS) in accordance with ISO 9227
Kätekuivati BJÖRK valge/NEGRO INGO plaadiga DAN DRYER 3000-70
PRODUCT DESCRIPTION
• Winner of a Red Dot Design Award!
• Drying cycle of only 10-15 seconds.
• Powerful commutator motor with carbon brushes.
• Comes in trendy matt black and classic white as standard.
• Also available in all RAL colours and coated with different prints.
• Top plate in 6 optional standard designs.
• LED light indicates when machine is in use.
• Adjustable sensor range, motor speed and heating setting.
• 5-year warranty.
| SPECIFICATIONS | |
|---|---|
| Product number: | 3000 / EAN no. 5-709818-030005 |
| Technical data: |
Touch-free hand dryer with white-painted steel housing (RAL 9003, gloss 60). Equipped with top plate. Infra-red sensor and elektronic timer. Drying cycle: 10-15 sec. IPX1, 230 V, 50/60 Hz, 1600 W, Class I (earthed). 76 dBA.
|
| Dimensions | H: 330 mm, W: 205 mm, D: 183 mm |
| Net Weight: | 6.5 kg |
