- Frost-free drinking system for cattle and horses
- Fresh and clean water for the animals all year round
- Without wiring or electricity
- A minimum of maintenance
- No concern about filling the drinking vessels
- No concern about cleaning the drinking vessels
Delabie majahoidja põranda valamu viduariga R/V teras AISI304 180140
Kaubamärk:
Ühik: tk
Tarneaeg: 14-21 päeva
‼️ Kasuta promokoodi KEVAD2026 ostukorvis ja saa soodustust – ainult täna!
▼ Loe edasi: ...
✅ Populaarsed tooted Tallinna laos kohe olemas — tarneaeg 1–3 päeva või tule ise järele.
✅ Kui toode on tellimisel, uuri lähemalt — saame tihti pakkuda oodatust kiiremat tarnet: info@pegu.ee
✅ Kõikidele toodetele garantii 2 aastat ja 14‑päevane tagastusõigus.
✅ Automaatne arve e‑postile. E‑arve soovijatel palume lisada märge kommentaaridesse.
ℹ️ Hind sisaldab käibemaksu.
Delabie majahoidja põranda valamu viduariga R/V teras AISI304 180140
Floor-standing janitorial unit
Ref. 180140
Floor-standing janitorial unit.
Bacteriostatic 304 stainless steel. Polished satin finish.
Stainless steel thickness: 1.0mm.
Smooth surface for easy cleaning.
Adjustable feet height up to 25mm.
With tap hole Ø 35mm on right side.
Supplied with 1 ¼" waste for washbasin and 1½" for disposal sink. Without overflow.
Hinged stainless steel bucket grid.
Weight: 22kg.
TECHNICAL FEATURES
Floor-standing janitorial unit
Ref. 180140
| Height | 900mm |
|---|---|
| Length | 600mm |
| Width | 500mm |
| Thickness | 1.0mm |
| Finish | 304 polished satin stainless steel |
Delabie Valamu Fraju roostevaba teras , ilma ülejooksuta 120430
FRAJU wall-mounted washbasin
Ref. 120430
Wall-mounted washbasin, 540x480mm.
Bacteriostatic 304 stainless steel.
Polished satin finish.
Stainless steel thickness: 1.2mm for the bowl and 1.5mm for surround.
Rounded edges prevent injury.
Without tap hole.
Supplied with 1¼" waste.
Without overflow.
Supplied with fixing elements.
CE marked. Complies with European standard EN 14688.
Weight: 4.65kg.
630,00 €
Delabie Valamu HEMI d310mm AISI304 poleeritud roostevaba teras 120471
Delabie Valamu HEMI d310mm AISI304 poleeritud roostevaba teras
HEMI inset round washbasin Ø 310mm - Ref. 120471
Round basin for recessed installation from above or below.
Basin internal diameter: 310mm.
Cut-out diameter: 330mm for installation from above, 310mm for installation from below.
Bacteriostatic 304 stainless steel.
304 stainless steel, bright polished
Stainless steel thickness: 1mm. One-piece, seam-free pressed bowl.
Rounded edges prevent injury. Supplied with 1¼" waste. Without overflow.
CE marked.
Complies with European standard EN 14688. Weight: 1.5kg.
284,00 €
Delabie valamu CANAL 2400mm, R/V teras (4 kohta) 120300
CANAL wall-mounted wash trough
Ref. 120300
Wall-mounted wash trough for 4 posts - 2,400mm
Bacteriostatic 304 stainless steel.
Polished satin finish.
Stainless steel thickness: 1mm for the bowl, 1.5mm for surroundand fixing brackets.
Easy to install: no joint concealers to install, light wash trough.
Drainage on the right.
With no tap hole.
Supplied with 1 ½" waste.
Without overflow.
Supplied with brackets and fixing elements.
CE marked. Complies with European standard EN 14296.
Weight: 20kg.
Possible to add a bacteriostatic 304 stainless steel splashback (ref. 0011800007).
| Height | 250mm |
|---|---|
| Length | 2400mm |
| Width | 400mm |
| Thickness | 1mm (basin) et 1.5mm (edge and fixing brackets) |
| Finish | 304 polished satin stainless steel |
1298,00 €
Külmumiskindel AUTOMAATJOOTJA Hobustele ja Lehmadele D40CM Frostline A342
DRINKING SYSTEM
Joogifontään põranda/sein mehaaniline R/V teras AISI304
AZP Brno AFO01.S
AFO 01.S
stainless steel drinking fountain with pressure valve designed to stand and to be attached to wall
AFO 01.S is a drinking fountain of stainless steel with pressure valve designed to stand and to be attached to wall. Water runs for the time for which the valve is pressed plus the pre-set period after it is released; thus the jet can be rinsed.
Water supply is provided by a flexible hose, trap comprises an elastic flexible couple. Flexible design of water supply and outflow allows variable and easy connection of the drinking fountain as well as its dismounting.
Automatic drinking fountain (with a sensor) can be supplied per order.
AFO 01.S is manufactured from the stainless steel AISI 304. Other materials (e.g. AISI 316) possible on order. For cleaning we recomnned WÜRTH detergents – material preservation (no. 0893 121 K) and material cleaning (no. 893 121 1).
Package contents
- Stainless housing with cone
- Pressure valve with jet
- Flexible hose outflow
- Fixing and connecting material
| dimensions | 330 x 900 x 365 mm |
| outlet | d = 40 mm |
| water inlet | G 1/2" |
| water pressure | 0,2 – 0,6 MPa, recommended 0,3 MPa |
| weight | 12 kg |
- Set up water outlet d = 40 mm
- Set up water inlet G 1/2"






