Tootegrupid
Kaubamärgid
Blogi Uudised
Esileht » Delabie Paneel seinale, valamule CANAL 1400mm, R/V teras 100260
Delabie Paneel seinale, valamule CANAL 1400mm, R/V teras 100260 Zoom
Delabie Paneel seinale, valamule CANAL 1400mm, R/V teras 100260 Delabie Paneel seinale, valamule CANAL 1400mm, R/V teras 100260 mõõdud

Delabie Paneel seinale, valamule CANAL 1400mm, R/V teras 100260

Tootekood: DE-100260
Kaubamärk:
Ühik: tk
Tarneaeg: 14-21 päeva

‼️ Kasuta promokoodi TALV2026 ostukorvis ja saa soodustust – ainult täna!

✅ Enamik populaarseid tooteid on Tallinna laos kohe olemas — tarneaeg 1–3 päeva või ise järeletulemine.

✅ Kui toode on tellimisel, kontrolli tarneaega või küsi täpsust e-postil: info@pegu.ee

✅ Kõikidele toodetele kehtib garantii 2 aastat. Tavakaupadele (ilma eritellimuseta) tagastusõigus 14 päeva.

✅ Automaatne arve saatmine e-postile nii era- kui äriklientidele. E-arve soovijatel palume lisada märge kommentaaridesse.

ESTO järelmaks kuumaks al. 23,72 €
Hind:
279,00 €
Kuumakse alates: 23,72 €
Kogus: - +

Delabie Paneel seinale, valamule CANAL 1400mm, R/V teras 100260

Splashback 1400mm for CANAL wash trough 
Ref. 100260

Splashback for CANAL wash trough.
Bacteriostatic 304 stainless steel.
Polished satin finish.
Stainless steel thickness: 1.2mm.
Length: 1,400mm. 

Failid

Sarnased tooted
Pesurenn roostevabast terasest 1800mm Intra PV180, konsoolidega
Pesurenn roostevabast terasest 1800mm Intra PV180, konsoolidega

Pesurenn roostevabast terasest 1800mm Intra PV180, konsoolidega

Pesurenn konsoolidega 1800mm 

Tootekood: I-P180V ,   Tarneaeg: 1-4 nädalat ,   Viimistlus:
806,00 €
2-ne Valamu jalgalel 1200x700, kõrgus 850mm , R/V teras Sanela SLUN16
2-ne Valamu jalgalel 1200x700, kõrgus 850mm , R/V teras Sanela SLUN16

2-ne Valamu jalgalel 1200x700, kõrgus 850mm , R/V teras Sanela SLUN16

Sanela SLUN16

2-ne Valamu jalaga 1200x700, kõrgus 850mm , R/V teras

Нержавеющая большегрузная двойная мойка на ножках, 1200 x 700 x 850 мм

 

Характеристики

  • stainless steel bulk double-sink with a sheating
  • without a tap hole (could be made to order)
  • possibility of fine plane regulation by the regulation screws on the supporting legs
  • possibility to order inner sinks in dimensions: 400 x 300 x 200 mm/ 400 x 400 x 250 mm/ 400 x 400 x 200 mm
  • available also in the length 1400 mm
  • material CrNi 18/10 (AISI-304)
  • brushed finish
  • different dimensions could be made to order
Арт. № 93160
Название SLUN 16
Tootekood: SA-SLUN16 ,   Tarneaeg: 3-5 nädala ,   Viimistlus:
3045,00 €
AZP Brno adapter 1-3 punkte ZAC 1-20
AZP Brno adapter 1-3 punkte ZAC 1-20

AZP Brno adapter 1-3 punkte ZAC 1-20

 
 

ZAC 1/20, ZAC 1/50, ZAC 1/36L

power supply

    
 
 
 

ZAC is a safe source of voltage supply intended to power automatic sanitary equipment made by AZP Brno, Ltd. 

The source of power supply consists of a safety transformer produced in accordance with ČSN IEC 742+A1 standards. All kinds of sensors can be connected to these sources in random combinations, as can other devices with a supply voltage of 12 V, 50 Hz (total power requirement either 20 VA, 50 VA or 36 VA). 

ZAC 1/20 and ZAC 1/50 are independent sources, 1/36L ZAC is the source for the location on the DIN-rail (4 modules).

 
 
Version types
ZAC 1/20 - source of power supply with output 20 VA
ZAC 1/50 - source of power supply with output 50 VA
ZAC 1/36L - source of power supply with output 36 VA
 
Source of power supply can be placed at a maximum distance of 30 m from the connected appliance. 
 
Basic technical information
Input voltage: 230 V, 50 Hz
Output voltage: 12 V, 50 Hz
Power requirement: 20 VA (ZAC 1/20)
  50 VA (ZAC 1/50)
  36 VA (ZAC 1/36L)
Electricity protection: IP 55 (ZAC 1/20, ZAC 1/50)
  IP 20 (ZAC 1/36L)
Weight: 0,8 kg (ZAC 1/20, ZAC 1/36L)
  1,2 kg (ZAC 1/50)
 
 
Requirements for setting up the construction
ZAC 1/20, ZAC 1/50
  1. Set-up supply of electricity 230 V,50 Hz – cable CYKY 3Cx1,5
  2. Set-up niche for flush mounting – size as per installed source
  3. Distribution to each device is carried out by cable CYKY 2Ax1,5
ZAC 1/36 L
  1. It is installed on the DIN-rail - width of 4 modules
 
 
Figure
ZAC 1/20
 
ZAC 1/50
 
 
 
 
 
Product title
ZAC 1/20 - 
power supply for up to 3 devices - 230V, 50Hz
ZAC 1/50 - 
power supply for up to 8 devices - 230V, 50Hz
ZAC 1/36L - 
power supply for up to 6 devices - 230V, 50Hz
Tootekood: AZP-ZAC 1-20 ,   Tarneaeg: 3-4 nädalad ,   Viimistlus:
106,72 €
Porinox WC pott roostevabast terasest, loputuskastiga, 2 süsteemne + iste mahagon
Porinox WC pott roostevabast terasest, loputuskastiga, 2 süsteemne + iste mahagon

Porinox WC pott roostevabast terasest, loputuskastiga,

2 süsteemne PINP-655-OVC-TB-P + iste mahagon 

Portinox WC pott loputuskastiga, ja istmega

Tootekood: PINP-655-OVC-TB-P+PWC-Mahagon ,   Tarneaeg: 8 nädalad ,   Viimistlus:
2468,82 €
Joogifontään free-standing mehaaniline R/V teras AISI304 AZP Brno AFO02
Joogifontään free-standing mehaaniline R/V teras AISI304 AZP Brno AFO02

Joogifontään free-standing mehaaniline R/V teras AISI304 AZP Brno AFO02

AFO 02 - IIstainless steel free-standing drinking fountain (indoor/outdoor)

 

AFO 02-II is a stainless steel drinking fountain of modern design with a manual press valve that allows its easy use. The water flows only when the valve is pressed and then there is a certain adjusted time to rinse out the nozzle.
The drinking fountain is to be placed in an open space. It is made up of an anchoring part intended for embedding in concrete and the column itself with a press valve and nozzle. These parts are connected by means of 3 screws and the upper part can be, therefore, easily dismounted in case of necessity (e.g. during winter).
The water inlet is fitted with a flexible hose, the siphon is made from a stretchy, flexible connector. The flexible finish of the water inlet and outlet allows the variable and problem-free connection of the fountain.
AFO 02-II stainless steel fountain is suitable mainly for schools, medical facilities and spa resorts, and is utilizable outdoors.
Drinking fountain AFO 02-II is manufactured from the stainless steel AISI 304. AFO 02.CL-II is made of the stainless steel AISI 316 and is suitable for places with higher concentration of chlorine.
For cleaning we recomnned WÜRTH detergents – material preservation (no. 0893 121 K) and material cleaning (no. 893 121 1).Detail of the bowl

Package contents

  • stainless steel column and cone with nozzle
  • press valve
  • anchoring construction
  • flexible hose siphon
  • connecting hoses
  • anchoring material
  • Set-up water inlet - pipe G 1/2“
  • Set-up drainage d = 40 mm
  • Prepared alcove for embedding (concreting) in the base construction
Water inlet G 1/2"
Water pressure 2 – 6 Bar, recommended 3 Bar
Outlet d = 40 mm
Inner dimensions of sink d = 290 mm
Weight 20 kg
 
Tootekood: AZP-AFO02 ,   Tarneaeg: 3-4 nädalad ,   Viimistlus:
1556,10 €

PEGU.ee — Iga segisti ja aksessuaar on valitud isikliku teadmise ja kogemusega. Teid nõustab **sanitaartehnika peaspetsialist, 25+ aastat kogemust.** Kontakt: info@pegu.ee · +372 515 0681