| Water inlet | G 1/2" |
| Water pressure | 2 – 6 Bar, recommended 3 Bar |
| Outlet | d = 40 mm |
| Inner dimensions of sink | d = 290 mm |
| Weight | 20 kg |
Delabie Paneel seinale, valamule CANAL 600mm, R/V teras 100240
Kaubamärk:
Ühik: tk
Tarneaeg: 14-21 päeva
✅ Enamik populaarseid tooteid on laos olemas — tarneaeg 1–3 päeva või ise järeletulemine.
Kui toode on tellimisel, kontrolli tarneaega või küsi täpsust e-postil: info@pegu.ee
Kui soovid e-arvet, lisa palun vastav märge tellimuse kommentaaridesse.
Hind:
![]()
Kuumakse alates: 12,75 €
150,43 €
Delabie Paneel seinale, valamule CANAL 600mm, R/V teras 100240
Splashback 600mm for CANAL wash trough
Ref. 100240
Splashback for CANAL wash trough.
Bacteriostatic 304 stainless steel.
Polished satin finish.
Stainless steel thickness: 1.2mm.
Length: 600mm.
Failid
Sarnased tooted
Automatne kummikute pesur harjaga, 220V, 50Hz roostevaba teras AZP Brno RMP 02
automatic washing system for soles with rotary brushes - 230V, 50Hz
RMP 02 is a stainless steel sensor-controlled washing system with rotary brushes for wellingtons. A built-in photocell sensor reacts to the user holding the handrail. The electromagnetic valve switches on, opens the water inlet, the brushes start to rotate and the circular jet injection of the disinfecting lotion is carried out. After placing the foot with the wellington on the grid in between the rotary brushes, the sole is cleaned by means of the horizontal brush. There is a CENTRAL/STOP button on the handrail for emergency switch-off.
The washing system is intended for free standing installation on the floor. Imperfections in the floor are balanced out by four adjustable hobs. The construction of the system allows the outlet to be placed above floor level. Large pieces of dirt are collected by a sieve, which can be easily cleaned. The sieve and brush can be taken out without using a tool.
The RMP 02 washing system, with its easy maintenance, is mainly intended for operations where quick removal of mechanical dirt from wellingtons is required.
The canister with disinfecting solution is not part of the delivery.
Package contents
- body of the washing machine
- removable grid
- electronics with photocell
- rotary brush
- hand brush
- jerican holder
- priming hose
- adjustable supporting legs
- central stop button
| Radius of sensor | 0,5 m |
| Water inlet | G 1/2“ |
| Water pressure | 0,1 – 1,0 MPa |
| Outlet | G 6/4” |
| Electricity protection | IP 55 |
| Power supply | 230 V, 50 Hz |
| Power requirement | 370 W |
| Water temperature | max. 42°C |
| Weight | 41 kg |
- Set up water inlet as per picture
- Set up outlet G 6/4” via effluvial cover
- Set up cable for power supply – 230 V, 50 Hz
Tootekood: AZP-RMP 02
, Tarneaeg: 3-5 nädalat
, Viimistlus:
10492,23 €
Intra GUB3 R/V teras koristajavalamu, ämberresti ja pritsmisplekiga, äravool 100mm
Valamu R/V terasest
Garaazi/koristusruumi jaoks
Tootekood: I-GUB3
, Tarneaeg: 14 -21 päeva
, Viimistlus:
360,82 €
Joogifontään seinale sensoriga R/V teras AISI316(basseinid) 6V(4x1.5V)
AZP Brno AFO01.YB.CL
AFO 01.Yst. steel sensor controlled drinking fountain
AFO 01.Y is st. stainless wall hung drinking fountain controlled by sensor. Water runs after disrupting the scanning zone.
Fountain is made by welding all components together.
Fountain is suppplied with safety power 12 V, 50 Hz from power supply ZAC (AFO 01.Y) or with 4x AA battery (AFO 01.YB).
Material is standardly st. steel AISI 304 or can be AISI 316 (AFO 01.Y.CL or AFO 01.YB.CL).
St. steel driking fountain AFO 01.Y is based on favourite model AFO 01 with manual control.
The sensor, located on the right side of the fountain, is reacting on the approach of the user. Water starts to run from the nozzle, located in the middle of the fountain bowl, and runs over the time when the user´s head is in the scanning zone (max. 30 sec.) + preset time (max. 4 sec.) to clean the nozzle.
Package contents
- st. steel drinking fountain
- nozzle
- sensor and electronic
- electromagnetic valve
- connecting flexible hose
- corner valve with filters
- siphon
- mounting material
| water inlet | G 1/2" |
| water pressure | 1 - 10 Bar (AFO 01.Y; AFO 01.Y.CL) |
| 2 - 8 Bar (AFO 01.YB; AFO 01.YB.CL) | |
| outlet | d = 40 mm |
| bowl inner dimension | d = 245 mm |
| weigth | 4 kg |
| suppply | 12 V, 50 Hz (AFO 01.Y; AFO 01.Y.CL) |
| 6 V - 4 x AA battery (AFO 01.YB; AFO 01.YB.CL) | |
| power supply | ZAC 1/20 (max. 3 x AFO 01.Y ; AFO 01.Y.CL) |
Tootekood: AZP-AFO01.YB.CL
, Tarneaeg: 3-4 nädala
, Viimistlus:
1302,00 €
Joogifontään free-standing mehaaniline R/V teras AISI316
AZP Brno AFO02.CL
AFO 02 - IIstainless steel free-standing drinking fountain (indoor/outdoor)
AFO 02-II is a stainless steel drinking fountain of modern design with a manual press valve that allows its easy use. The water flows only when the valve is pressed and then there is a certain adjusted time to rinse out the nozzle.
The drinking fountain is to be placed in an open space. It is made up of an anchoring part intended for embedding in concrete and the column itself with a press valve and nozzle. These parts are connected by means of 3 screws and the upper part can be, therefore, easily dismounted in case of necessity (e.g. during winter).
The water inlet is fitted with a flexible hose, the siphon is made from a stretchy, flexible connector. The flexible finish of the water inlet and outlet allows the variable and problem-free connection of the fountain.
AFO 02-II stainless steel fountain is suitable mainly for schools, medical facilities and spa resorts, and is utilizable outdoors.
Drinking fountain AFO 02-II is manufactured from the stainless steel AISI 304. AFO 02.CL-II is made of the stainless steel AISI 316 and is suitable for places with higher concentration of chlorine.
For cleaning we recomnned WÜRTH detergents – material preservation (no. 0893 121 K) and material cleaning (no. 893 121 1).Detail of the bowl
Package contents
- stainless steel column and cone with nozzle
- press valve
- anchoring construction
- flexible hose siphon
- connecting hoses
- anchoring material
- Set-up water inlet - pipe G 1/2“
- Set-up drainage d = 40 mm
- Prepared alcove for embedding (concreting) in the base construction
Tootekood: AZP-AFO02.CL
, Tarneaeg: 3-4 nädalad
, Viimistlus:
1934,20 €
Joogifontään põranda/sein pudeli täitmisega, mehaaniline R/V teras AISI304
AZP Brno AFO01.SL
AFO 01.SL
drinking fountain with spout for filling bottles designed to stand and to be attached to wall
AFO 01.SL is a drinking fountain with spout for filling bottles designed to stand and to be attached to wall. Water runs for the time for which the valve is pressed plus the pre-set period after it is released; thus the jet can be rinsed. Second pressure valve serves for bottle filling.
In standard version the fountain is produced with a niche suitable for filling the bottle of 0.7 l. Fliountain with a niche for filling the botlles of 1.5 l can be made on order.
Water supply is provided by a flexible hose, trap comprises an elastic flexible couple. Flexible design of water supply and outflow allows variable and easy connection of the drinking fountain as well as its dismounting.
TAutomatic drinking fountain (with a sensor) can be supplied per order.
AFO 01.SL is manufactured from the stainless steel AISI 304. Other materials (e.g. AISI 316) possible on order.
For cleaning we recomnned WÜRTH detergents – material preservation (no. 0893 121 K) and material cleaning (no. 893 121 1).
Package contents
- Stainless housing with cone
- Pressure valve with jet
- Pressure valve for bottle filling
- Flexible hose outflow
- Fixing and connecting material
| dimensions | 330 x 900 x 365 mm |
| water outlet | d = 40 mm |
| water inlet | G 1/2" |
| water pressure | 2 - 6 Bar, recommended 3 Bar |
| weight | 12 kg |
- Set up water outlet d = 40 mm
- Set up water inlet G 1/2"
Tootekood: AZP-AFO01.SL
, Tarneaeg: 3-4 nädalad
, Viimistlus:
1948,43 €
