Delabie roostevaba INVA VALAMU TEK kraanikauss kahe nupuga 161360
Kaubamärk:
Ühik: tk
Tarneaeg: 3-4 nädala
‼️ Kasuta promokoodi KEVAD2026 ostukorvis ja saa soodustust – ainult täna!
▼ Loe edasi: ...
✅ Populaarsed tooted Tallinna laos kohe olemas — tarneaeg 1–3 päeva või tule ise järele.
✅ Kui toode on tellimisel, uuri lähemalt — saame tihti pakkuda oodatust kiiremat tarnet: info@pegu.ee
✅ Kõikidele toodetele garantii 2 aastat ja 14‑päevane tagastusõigus.
✅ Automaatne arve e‑postile. E‑arve soovijatel palume lisada märge kommentaaridesse.
ℹ️ Hind sisaldab käibemaksu.
Delabie roostevaba INVA VALAMU TEK kraanikauss kahe nupuga 161360
Seinale kinnitatav kätepesukraan. Bakteriostaatiline 304 roostevabast terasest. Roostevabast terase paksus: 1,2 mm. Ümarad servad hoiavad ära vigastused. Vandaalikindel: varjatud valamu, peidetud äravool.
Varustatud taimerklapiga: roostevabast terasest turvanupp ja blokeerumisvastane süsteem, taimer 7 sekundit.
Kahe nupuga külm vesi/segavesi.
Lame perforeeritud äravool, ilma kruvideta: kergesti puhastatav ja vandaalikindel.
Ilma ülevooluta.
Varustatud äravooluga.
Varustatud kinnitusdetailidega. CE-märgisega. Vastab Euroopa standardile EN 14688.
Kaal: 8,6 kg.
TEK washbasin with 2 buttons
Ref. 161360
Bacteriostatic 304 stainless steel.
Stainless steel thickness: 1.2mm.
Rounded edges prevent injury.
Vandal-resistant: shrouded basin, concealed trap.
Supplied with a time flow valve: stainless steel tamperproof push-button and anti-blocking system, time flow 7 seconds.
With 2 buttons cold water/mixed water.
Flat perforated waste, without screws: easy to clean and vandal-resistant.
Without overflow.
Supplied with trap.
Supplied with fixing elements.
CE marked. Complies with European standard EN 14688.
Weight: 8.6kg.
TECHNICAL CHARACTERISTICS
TEK washbasin with 2 buttons
Ref. 161360| Height | 385mm |
| Length | 395mm |
| Width | 400mm |
| Thickness | 1.2mm |
| Finish | Polished satin 304 stainless steel |
Failid
Haceka Aspen kroom vannikäepide 1208546
23,38 €
FM Mattson külmumisvastane aiakraan 400mm, võtmega soe+külm vesi 42820050
Garden valve for cold and hot water
- For cold and hot water
- With approved non-return valves
- Can be cut to suit wall thickness
- Wall bracket: H=70 mm, W=180 mm, screw holes c/c 164 mm
Porinox WC pott roostevabast terasest, loputuskastiga,
2 süsteemne PINP-655-OVC-TB-P + iste mahagon
Portinox WC pott loputuskastiga, ja istmega
Automatne kummikute pesur harjaga, 220V, 50Hz roostevaba teras AZP Brno RMP 02
automatic washing system for soles with rotary brushes - 230V, 50Hz
RMP 02 is a stainless steel sensor-controlled washing system with rotary brushes for wellingtons. A built-in photocell sensor reacts to the user holding the handrail. The electromagnetic valve switches on, opens the water inlet, the brushes start to rotate and the circular jet injection of the disinfecting lotion is carried out. After placing the foot with the wellington on the grid in between the rotary brushes, the sole is cleaned by means of the horizontal brush. There is a CENTRAL/STOP button on the handrail for emergency switch-off.
The washing system is intended for free standing installation on the floor. Imperfections in the floor are balanced out by four adjustable hobs. The construction of the system allows the outlet to be placed above floor level. Large pieces of dirt are collected by a sieve, which can be easily cleaned. The sieve and brush can be taken out without using a tool.
The RMP 02 washing system, with its easy maintenance, is mainly intended for operations where quick removal of mechanical dirt from wellingtons is required.
The canister with disinfecting solution is not part of the delivery.
Package contents
- body of the washing machine
- removable grid
- electronics with photocell
- rotary brush
- hand brush
- jerican holder
- priming hose
- adjustable supporting legs
- central stop button
| Radius of sensor | 0,5 m |
| Water inlet | G 1/2“ |
| Water pressure | 0,1 – 1,0 MPa |
| Outlet | G 6/4” |
| Electricity protection | IP 55 |
| Power supply | 230 V, 50 Hz |
| Power requirement | 370 W |
| Water temperature | max. 42°C |
| Weight | 41 kg |
- Set up water inlet as per picture
- Set up outlet G 6/4” via effluvial cover
- Set up cable for power supply – 230 V, 50 Hz
Automatne kummikute pesur harjaga, 220V, 50Hz roostevaba teras AZP Brno RMO 02
RMO 02
automatic washing system for wellingtons
RMO 02 is a stainless steel sensor-controlled washing system with rotary brushes for wellingtons. A built-in photocell sensor reacts to the user holding the handrail. The electromagnetic valve switches on, opens the water inlet, the brushes start to rotate and the circular jet injection of the disinfecting lotion is carried out. After placing the foot with the wellington on the grid in between the rotary brushes, the sole is cleaned by means of the horizontal brush and the leg portion is cleaned by means of two vertical brushes. The system is automatically switched off when the user releases the handrail. There is a CENTRAL/STOP button on the handrail for emergency switch-off.
The washing system is intended for free standing installation on the floor. Imperfections of the floor are balanced out by four adjustable hobs. The construction of the system allows the outlet to be placed above the floor level.
The RMO 02 washing system, with its easy maintenance, is mainly intended for operations where quick removal of mechanical dirt from wellingtons is required.
The canister with disinfecting solution is not part of the delivery.
Package contents
- body of the washing machine
- removable grid
- electronics with photocell
- three rotary brushes
- jerican holder
- priming hose
- adjustable supporting legs
- central stop button
| Radius of sensor | 0,7 m |
| Water inlet | G 1/2“ |
| Water pressure | 0,1 – 1,0 MPa |
| Outlet | G 6/4” |
| Electricity protection | IP 55 |
| Power supply | 230 V, 50 Hz |
| Power requirement | 370 W |
| Water temperature | max. 42°C |
| Weight | 95 kg |
- Set up water inlet as per picture
- Set up outlet G 6/4” via effluvial cover
- Set up cable for power supply – 230 V, 50 Hz
