Delabie termostaat segisti dushile SECURITHERM kroom HOSPITAL H9741
Kaubamärk:
Ühik: tk
Tarneaeg: 14-21 päeva
✅ Enamik populaarseid tooteid on laos olemas — tarneaeg 1–3 päeva või ise järeletulemine.
Kui toode on tellimisel, kontrolli tarneaega või küsi täpsust e-postil: info@pegu.ee
Kui soovid e-arvet, lisa palun vastav märge tellimuse kommentaaridesse.
Delabie termostaat segisti dushile SECURITHERM kroom HOSPITAL H9741
DESCRIPTION
SECURITHERM Securitouch thermostatic shower mixer
Ref. H9741
SECURITHERM dual control thermostatic shower mixer with:
- Anti-scalding failsafe: hot water shuts off immediately if cold water supply fails (and vice versa).
- Securitouch thermal insulation to prevent burns.
- Scale-resistant thermostatic cartridge for temperature adjustment.
- 1/4-turn ceramic head for flow rate adjustment.
- Temperature control: 25 - 41°C.
- Double temperature limiter: first limiter set at 38°C can be overridden, second limiter set at 41°C.
- Thermal shocks are easy to undertake without removing the control knob or shutting off the cold water supply.
- Flow rate regulated at 9 lpm.
- Chrome-plated brass body and ERGO controls.
- M1/2" shower outlet.
- M3/4" inlets with integrated filters and non-return valves.
Mixer supplied with offset M1/2" M3/4" STOP/PURGE connectors, suitable for hospitals.
TECHNICAL FEATURES
SECURITHERM Securitouch thermostatic shower mixer
Ref. H9741
| Connector | M1/2" |
|---|---|
| Technology | SECURITHERM dual control thermostatic, Securitouch |
| Depth | 95mm |
| Length | 286mm |
| Flow rate | 9 lpm |
| Temperature limiter | 41°C |
| Finish | Chrome-plated brass |
Failid
Nagi oksaga Mediclinics AI0010CS R/V teras harjatud
Nagi oksaga.
harjatud
AISI 304
9,00 €
Damixa A-Pex dusikomplekt pea-ja käsidusiga , kroom
Dušikomplekt A-Pex
- Artikli number 73600
- Viimistlused Kroom
- Standardfunktsioonid
- Keraamiline tööorgan.
- Koos dušikomplektiga, nagu on näidatud.
- Põletuskaitsega
- 1/2" ühendus käsiduši voolikule.
- Kummiaeraator - lihtne puhastada.
- Standardne tsentrite vahe 150 mm.
- Ümberlüliti
- 1500 mm dušivoolik plastkattega.
1372,13 €
Damixa termostaatsegisti ROWAN Thermixa 400 kroom LM
Termostaatsegistid
Termostaatsegisti Thermixa 400
- Artikli number 57404
- Viimistlused Kroom
- Standardfunktsioonid
- Keraamiline tööorgan.
- Põletuskaitsega
- Veesäästu funktsioon Eco-Klik.
- 1/2" ühendus käsiduši voolikule.
- Standardne tsentrite vahe 150 mm.
- Varustatud ilukatete ja ekstsentrikutega.
274,43 €
Automatne kummikute pesur düüsiga, 12V, 50Hz RST AZP Brno AMO 01
Automatne kummikute pesur düüsiga, 12V, 50Hz
automatic washing system for wellingtons with jets - 12V, 50Hz
AMO 01 is a stainless steel automatic washing system for wellingtons with sensor-controlled water nozzles. When stepping into the washing chamber of the system (scanning zone) water starts to flow from the nozzles automatically and wellingtons are cleaned of dirt. Water stops flowing with a certain time delay after the foot has been removed from the scanning zone.
AMO 01 is designed for a single pipe inlet of pre-mixed water from the circulation or water pre-mixed by means of a thermostatic valve.
The AMO 01 automatic washing system is intended mainly for operations with slight shoe contamination where quick washing at maximum water savings is guaranteed.
Package contents
- body of the washing machine
- photocell head
- nozzles – 8 pcs
- electromagnetic valves 2 pcs
- corner valves with filter
- connecting hoses
| Radius of sensor | 0 – 0,4 m |
| Water inlet | G 1/2“ |
| Water pressure | 0,3 – 1,0 MPa |
| Outlet | d = 32 mm |
| Inner dimensions of the trough | 250 x 400 x 280 mm |
| Electricity protection | IP 55 |
| Power supply | 12 V, 50 Hz |
| Power requirement | 10 VA |
| Source of power supply | ZAC 1/20 (max. 2 x AMO 01) |
| ZAC 1/50 (max. 5 x AMO 01) | |
| Weight | 18 kg |
- Set up water inlet as per picture
- Set up outlet d = 32 mm
- Set up cable for power supply – 12 V, 50 Hz from source of power supply ZAC
Automatne kummikute pesur harjaga, 220V, 50Hz roostevaba teras AZP Brno RMO 02
RMO 02
automatic washing system for wellingtons
RMO 02 is a stainless steel sensor-controlled washing system with rotary brushes for wellingtons. A built-in photocell sensor reacts to the user holding the handrail. The electromagnetic valve switches on, opens the water inlet, the brushes start to rotate and the circular jet injection of the disinfecting lotion is carried out. After placing the foot with the wellington on the grid in between the rotary brushes, the sole is cleaned by means of the horizontal brush and the leg portion is cleaned by means of two vertical brushes. The system is automatically switched off when the user releases the handrail. There is a CENTRAL/STOP button on the handrail for emergency switch-off.
The washing system is intended for free standing installation on the floor. Imperfections of the floor are balanced out by four adjustable hobs. The construction of the system allows the outlet to be placed above the floor level.
The RMO 02 washing system, with its easy maintenance, is mainly intended for operations where quick removal of mechanical dirt from wellingtons is required.
The canister with disinfecting solution is not part of the delivery.
Package contents
- body of the washing machine
- removable grid
- electronics with photocell
- three rotary brushes
- jerican holder
- priming hose
- adjustable supporting legs
- central stop button
| Radius of sensor | 0,7 m |
| Water inlet | G 1/2“ |
| Water pressure | 0,1 – 1,0 MPa |
| Outlet | G 6/4” |
| Electricity protection | IP 55 |
| Power supply | 230 V, 50 Hz |
| Power requirement | 370 W |
| Water temperature | max. 42°C |
| Weight | 95 kg |
- Set up water inlet as per picture
- Set up outlet G 6/4” via effluvial cover
- Set up cable for power supply – 230 V, 50 Hz
