| Water inlet | G 1/2" |
| Water pressure | 2 – 6 Bar, recommended 3 Bar |
| Outlet | d = 40 mm |
| Inner dimensions of sink | d = 290 mm |
| Weight | 20 kg |
Delabie valamu AQUEDUTO 700x440 roostevaba teras satiin 120150
Kaubamärk:
Ühik: tk
Tarneaeg: 14-21 päeva
‼️ Kasuta promokoodi SUVI2026 ostukorvis ja saa soodustust – ainult täna!
▼ Loe edasi: ...
✅ Populaarsed tooted Tallinna laos kohe olemas — tarneaeg 1–3 päeva või tule ise järele.
✅ Kui toode on tellimisel, uuri lähemalt — saame tihti pakkuda oodatust kiiremat tarnet: info@pegu.ee
✅ Kõikidele toodetele garantii 2 aastat ja 14‑päevane tagastusõigus.
✅ Automaatne arve e‑postile. E‑arve soovijatel palume lisada märge kommentaaridesse.
ℹ️ Hind sisaldab käibemaksu.
Hind:
1407,00 €
![]()
Kuumakse alates: 107,64 €
1266,30 €
Delabie valamu AQUEDUTO 700x440 roostevaba teras satiin 120150
AQUEDUTO wall-mounted washbasin
Ref. 120150
Wall-mounted washbasin, 700x440mm.
Simple and timeless design.
Bacteriostatic 304 stainless steel.
Polished satin finish.
.Stainless steel thickness: 1.5mm
Rounded edges prevent injury.
With no tap hole.
Supplied with 1 ¼" waste.
Without overflow.
Supplied with brackets and fixing elements.
CE marked. Complies with European standard EN 14688.
Weight: 12kg.
Failid
Sarnased tooted
Intra GUB2 R/V teras koristaja valamu, ämberresti ja pritsmisplekiga
Valamu R/V terasest
Garaazi/koristusruumi jaoks
Tootekood: I-GUB2
, Tarneaeg: 7-14 päeva
, Viimistlus:
360,00 €
Automatne kummikute pesur düüsiga, 12V, 50Hz RST AZP Brno AMO 01
Automatne kummikute pesur düüsiga, 12V, 50Hz
automatic washing system for wellingtons with jets - 12V, 50Hz
AMO 01 is a stainless steel automatic washing system for wellingtons with sensor-controlled water nozzles. When stepping into the washing chamber of the system (scanning zone) water starts to flow from the nozzles automatically and wellingtons are cleaned of dirt. Water stops flowing with a certain time delay after the foot has been removed from the scanning zone.
AMO 01 is designed for a single pipe inlet of pre-mixed water from the circulation or water pre-mixed by means of a thermostatic valve.
The AMO 01 automatic washing system is intended mainly for operations with slight shoe contamination where quick washing at maximum water savings is guaranteed.
Package contents
- body of the washing machine
- photocell head
- nozzles – 8 pcs
- electromagnetic valves 2 pcs
- corner valves with filter
- connecting hoses
| Radius of sensor | 0 – 0,4 m |
| Water inlet | G 1/2“ |
| Water pressure | 0,3 – 1,0 MPa |
| Outlet | d = 32 mm |
| Inner dimensions of the trough | 250 x 400 x 280 mm |
| Electricity protection | IP 55 |
| Power supply | 12 V, 50 Hz |
| Power requirement | 10 VA |
| Source of power supply | ZAC 1/20 (max. 2 x AMO 01) |
| ZAC 1/50 (max. 5 x AMO 01) | |
| Weight | 18 kg |
- Set up water inlet as per picture
- Set up outlet d = 32 mm
- Set up cable for power supply – 12 V, 50 Hz from source of power supply ZAC
Tootekood: AZP-AMO 01
, Tarneaeg: 3-5 nädalat
, Viimistlus:
2444,43 €
Ämbrirest valamule Intra U4
URIST4-1
Tootekood: I-URIST4-1
, Tarneaeg: 7-14 päeva
, Viimistlus:
124,00 €
Bobrick Riiul + Tööriista hoidik seinale 4ne, Mop and Broom Holder R/V teras AISI304 B-224x36
DESCRIPTION
Shelf is 18‑gauge (1.2mm), type 304 stainless steel, satin finish; 36" Long, 6" H, 8" D (915 x 150 x 205mm). Four anti-slip mop holders have spring-loaded rubber cam that grips handles 7⁄8" to 1 1⁄4" (20–30mm) diameter. Holds mops 8" (205mm) from wall. Three stainless steel rag hooks. Rod for wet rags below shelf.
Tootekood: B-224x36
, Tarneaeg: 6-8 nädala
, Viimistlus:
827,00 €
Joogifontään free-standing mehaaniline R/V teras AISI304 AZP Brno AFO02
AFO 02 - IIstainless steel free-standing drinking fountain (indoor/outdoor)
AFO 02-II is a stainless steel drinking fountain of modern design with a manual press valve that allows its easy use. The water flows only when the valve is pressed and then there is a certain adjusted time to rinse out the nozzle.
The drinking fountain is to be placed in an open space. It is made up of an anchoring part intended for embedding in concrete and the column itself with a press valve and nozzle. These parts are connected by means of 3 screws and the upper part can be, therefore, easily dismounted in case of necessity (e.g. during winter).
The water inlet is fitted with a flexible hose, the siphon is made from a stretchy, flexible connector. The flexible finish of the water inlet and outlet allows the variable and problem-free connection of the fountain.
AFO 02-II stainless steel fountain is suitable mainly for schools, medical facilities and spa resorts, and is utilizable outdoors.
Drinking fountain AFO 02-II is manufactured from the stainless steel AISI 304. AFO 02.CL-II is made of the stainless steel AISI 316 and is suitable for places with higher concentration of chlorine.
For cleaning we recomnned WÜRTH detergents – material preservation (no. 0893 121 K) and material cleaning (no. 893 121 1).Detail of the bowl
Package contents
- stainless steel column and cone with nozzle
- press valve
- anchoring construction
- flexible hose siphon
- connecting hoses
- anchoring material
- Set-up water inlet - pipe G 1/2“
- Set-up drainage d = 40 mm
- Prepared alcove for embedding (concreting) in the base construction
Tootekood: AZP-AFO02
, Tarneaeg: 3-4 nädalad
, Viimistlus:
1556,10 €
