- Frost-free drinking system for cattle and horses
- Fresh and clean water for the animals all year round
- Without wiring or electricity
- A minimum of maintenance
- No concern about filling the drinking vessels
- No concern about cleaning the drinking vessels
Delabie valamu AQUEDUTO 700x440 segistiavaga d35mm roostevaba teras satiin 121150
Kaubamärk:
Ühik: tk
Tarneaeg: 14-21 päeva
✅ Enamik populaarseid tooteid on laos olemas — tarneaeg 1–3 päeva või ise järeletulemine.
Kui toode on tellimisel, kontrolli tarneaega või küsi täpsust e-postil: info@pegu.ee
Kui soovid e-arvet, lisa palun vastav märge tellimuse kommentaaridesse.
Delabie valamu AQUEDUTO 700x440 segistiavaga d35mm roostevaba teras satiin 121150
AQUEDUTO wall-mounted washbasin
Ref. 121150
Wall-mounted washbasin, 700x440mm
Simple and timeless design.
Bacteriostatic 304 stainless steel.
Polished satin finish.
Stainless steel thickness: 1.5mm
Rounded edges prevent injury.
With Ø 35mm central tap hole.
Supplied with 1 ¼" waste.
Without overflow.
Supplied with brackets and fixing elements.
CE marked. Complies with European standard EN 14688.
Weight: 12kg.
Failid
Kätepesuvalamu segistiavadega RS72 roostevaba teras, ülevoolutoruga
560x420 +konsoolid INTRA
General
| Size (mm): | 560 x 420 x 199 |
Accessories
| Included: | |
| Extra equipment: | Brackets |
| Mounting: | Wall mount |
| Finish: | Satin |
| Properties: | Overflow |
Automatne kummikute pesur harjaga, 220V, 50Hz roostevaba teras AZP Brno RMP 02
automatic washing system for soles with rotary brushes - 230V, 50Hz
RMP 02 is a stainless steel sensor-controlled washing system with rotary brushes for wellingtons. A built-in photocell sensor reacts to the user holding the handrail. The electromagnetic valve switches on, opens the water inlet, the brushes start to rotate and the circular jet injection of the disinfecting lotion is carried out. After placing the foot with the wellington on the grid in between the rotary brushes, the sole is cleaned by means of the horizontal brush. There is a CENTRAL/STOP button on the handrail for emergency switch-off.
The washing system is intended for free standing installation on the floor. Imperfections in the floor are balanced out by four adjustable hobs. The construction of the system allows the outlet to be placed above floor level. Large pieces of dirt are collected by a sieve, which can be easily cleaned. The sieve and brush can be taken out without using a tool.
The RMP 02 washing system, with its easy maintenance, is mainly intended for operations where quick removal of mechanical dirt from wellingtons is required.
The canister with disinfecting solution is not part of the delivery.
Package contents
- body of the washing machine
- removable grid
- electronics with photocell
- rotary brush
- hand brush
- jerican holder
- priming hose
- adjustable supporting legs
- central stop button
| Radius of sensor | 0,5 m |
| Water inlet | G 1/2“ |
| Water pressure | 0,1 – 1,0 MPa |
| Outlet | G 6/4” |
| Electricity protection | IP 55 |
| Power supply | 230 V, 50 Hz |
| Power requirement | 370 W |
| Water temperature | max. 42°C |
| Weight | 41 kg |
- Set up water inlet as per picture
- Set up outlet G 6/4” via effluvial cover
- Set up cable for power supply – 230 V, 50 Hz
Külmumiskindel AUTOMAATJOOTJA Hobustele ja Lehmadele D40CM Frostline A342
DRINKING SYSTEM
Joogifontään seinale sensoriga R/V teras AISI316(basseinid) 12V/50Hz
AZP Brno AFO01.YCL
AFO 01.Yst. steel sensor controlled drinking fountain
AFO 01.Y is st. stainless wall hung drinking fountain controlled by sensor. Water runs after disrupting the scanning zone.
Fountain is made by welding all components together.
Fountain is suppplied with safety power 12 V, 50 Hz from power supply ZAC (AFO 01.Y) or with 4x AA battery (AFO 01.YB).
Material is standardly st. steel AISI 304 or can be AISI 316 (AFO 01.Y.CL or AFO 01.YB.CL).
St. steel driking fountain AFO 01.Y is based on favourite model AFO 01 with manual control.
The sensor, located on the right side of the fountain, is reacting on the approach of the user. Water starts to run from the nozzle, located in the middle of the fountain bowl, and runs over the time when the user´s head is in the scanning zone (max. 30 sec.) + preset time (max. 4 sec.) to clean the nozzle.
Package contents
- st. steel drinking fountain
- nozzle
- sensor and electronic
- electromagnetic valve
- connecting flexible hose
- corner valve with filters
- siphon
- mounting material
| water inlet | G 1/2" |
| water pressure | 1 - 10 Bar (AFO 01.Y; AFO 01.Y.CL) |
| 2 - 8 Bar (AFO 01.YB; AFO 01.YB.CL) | |
| outlet | d = 40 mm |
| bowl inner dimension | d = 245 mm |
| weigth | 4 kg |
| suppply | 12 V, 50 Hz (AFO 01.Y; AFO 01.Y.CL) |
| 6 V - 4 x AA battery (AFO 01.YB; AFO 01.YB.CL) | |
| power supply | ZAC 1/20 (max. 3 x AFO 01.Y ; AFO 01.Y.CL) |
Kranikaussi komplekt TEMPOSTOP 1-200mm
Delabie 741943
TECHNICAL FEATURES
TEMPOSTOP time flow tap
Ref. 741943
| Connector | M1/2" |
|---|---|
| Technology | Time flow |
| Length | 200mm |
| Spout length | 75mm |
| Flow rate | 3 lpm |
TEMPOSTOP time flow tap
Ref. 741943
Cross wall time flow tap with swivel spout :
Time flow ~7 sec.
Flow rate pre-set at 3 lpm at 3 bar, can be adjusted from 1.5 to 6 lpm.
Tamperproof scale-resistant flow straightener.
Solid chrome-plated brass body M1/2".
Control ≤ 200mm and spout ≤ 230mm cut-size.
Anti-rotating pin and back-nut. AB anti-blocking system.
AB anti-blocking system: water will flow only when the push-button is






