Tootegrupid
jpg_160130_1.jpg Zoom

Delabie valamu BOB TC roostevaba teras satiin

Kaubamärk:
Ühik: tk
Tarneaeg: 14-21 päeva
Hind:
812,10 €
Kuumakse alates: 69,03 €
Kogus: - +
   - või -   

DESCRIPTION

BOB TC washbasin 
Ref. 160130

Wall-mounted washbasin with through-the-wallinstallation for service ducts. 
Basin internal diameter: 310mm. 
Clean and simple design. 
Bacteriostatic 304 stainless steel.
Stainless steel thickness: 1.2mm. 
Rounded edges prevent injury. 
Vandal-resistant: shrouded basin. 
200mm threaded rod can be cut to size (other lengths are available on request). 
Without overflow. 
Supplied with fixing elements. 
CE marked. Complies with European standardEN 14688. 
Weight: 5.5kg. 

Sarnased tooted

Kollektiivne pissuaari renn 1200 mm roostevabst terasest

Tootekood: PO-URM-1200 ,   Tarneaeg: 3-4 nädalad ,   Viimistlus:
1367,05 €

2-ne Valamu jalaga 1200x700, kõrgus 850mm , R/V teras

Нержавеющая большегрузная двойная мойка на ножках, 1200 x 700 x 850 мм

 

Характеристики

  • stainless steel bulk double-sink with a sheating
  • without a tap hole (could be made to order)
  • possibility of fine plane regulation by the regulation screws on the supporting legs
  • possibility to order inner sinks in dimensions: 400 x 300 x 200 mm/ 400 x 400 x 250 mm/ 400 x 400 x 200 mm
  • available also in the length 1400 mm
  • material CrNi 18/10 (AISI-304)
  • brushed finish
  • different dimensions could be made to order
Арт. № 93160
Название SLUN 16
Tootekood: SA-SLUN16 ,   Tarneaeg: 3-5 nädalad ,   Viimistlus:
2790,00 €

Plaster püüdur kipsieraldaja GIPS-01 Elcee 255, 9L, R/V teras, AISI304

Overall dimension in mm Ø300 x 382 Inlet dimension in mm 1.5" Outlet dimension in mm 1.5" Material AISI 304 Material thickness in mm 1.5 Gross weight in kg 7.70

Tootekood: EL255-GIPS-01 ,   Tarneaeg: 3-4 nädalad ,   Viimistlus:
1309,11 €

Automatne kummikute pesur düüsiga, 12V, 50Hz

automatic washing system for wellingtons with jets - 12V, 50Hz

 

AMO 01 is a stainless steel automatic washing system for wellingtons with sensor-controlled water nozzles. When stepping into the washing chamber of the system (scanning zone) water starts to flow from the nozzles automatically and wellingtons are cleaned of dirt. Water stops flowing with a certain time delay after the foot has been removed from the scanning zone.
AMO 01 is designed for a single pipe inlet of pre-mixed water from the circulation or water pre-mixed by means of a thermostatic valve.
The AMO 01 automatic washing system is intended mainly for operations with slight shoe contamination where quick washing at maximum water savings is guaranteed.

Package contents

  • body of the washing machine
  • photocell head
  • nozzles – 8 pcs
  • electromagnetic valves 2 pcs
  • corner valves with filter
  • connecting hoses
 
Radius of sensor 0 – 0,4 m
Water inlet G 1/2“
Water pressure 0,3 – 1,0 MPa
Outlet d = 32 mm
Inner dimensions of the trough 250 x 400 x 280 mm
Electricity protection IP 55
Power supply 12 V, 50 Hz
Power requirement 10 VA
Source of power supply ZAC 1/20 (max. 2 x AMO 01)
  ZAC 1/50 (max. 5 x AMO 01)
Weight 18 kg
  • Set up water inlet as per picture
  • Set up outlet d = 32 mm
  • Set up cable for power supply – 12 V, 50 Hz from source of power supply ZAC
Tootekood: AZP-AMO 01 ,   Tarneaeg: 3-5 nädalat ,   Viimistlus:
2444,43 €

Joogifontään põranda/sein pudeli täitmisega, mehaaniline R/V teras AISI304

AFO 01.SL

drinking fountain with spout for filling bottles designed to stand and to be attached to wall

AFO 01.SL is a drinking fountain with spout for filling bottles designed to stand and to be attached to wall. Water runs for the time for which the valve is pressed plus the pre-set period after it is released; thus the jet can be rinsed. Second pressure valve serves for bottle filling.

In standard version the fountain is produced with a niche suitable for filling the bottle of 0.7 l. Fliountain with a niche for filling the botlles of 1.5 l can be made on order. 

Water supply is provided by a flexible hose, trap comprises an elastic flexible couple. Flexible design of water supply and outflow allows variable and easy connection of the drinking fountain as well as its dismounting. 

TAutomatic drinking fountain (with a sensor) can be supplied per order.

AFO 01.SL is manufactured from the stainless steel AISI 304. Other materials (e.g. AISI 316) possible on order.
For cleaning we recomnned WÜRTH detergents – material preservation (no. 0893 121 K) and material cleaning (no. 893 121 1). 

Package contents

  • Stainless housing with cone
  • Pressure valve with jet
  • Pressure valve for bottle filling
  • Flexible hose outflow
  • Fixing and connecting material
dimensions 330 x 900 x 365 mm
water outlet d = 40 mm
water inlet G 1/2"
water pressure 2 - 6 Bar, recommended 3 Bar
weight 12 kg

 

  • Set up water outlet d = 40 mm
  • Set up water inlet G 1/2"

 

Tootekood: AZP-AFO01.SL ,   Tarneaeg: 3-4 nädalad ,   Viimistlus:
1948,43 €

PEGU.ee – iga segisti ja vannitoa aksessuaar on valitud isikliku teadmise ja kogemusega.Teid teenindab sanitaartehnika ekspert Aleksandr Gumenjuk, 25+ aasta kogemusega. info@pegu.ee · +372 515 0681