Dušiotsik koos toruga Presto 29250 Alpa komplektile
Tootekoodid ja tehniline info on kättesaadavad projekti või spetsiaalse päringu korral.
Ekspert aitab valida sobivaima lahenduse nii koju kui objekti jaoks.
Soovitame jagada tootelehte, mitte ainult koodi – see välistab segaduse.
Küsi julgelt: info@pegu.ee
Ühik: tk
Tarneaeg: 7-14 päeva
Müüja: PEGU OÜ
Dušiotsik koos toruga Presto 29250 Alpa komplektile
1/2" väliskeere
> Working pressure: 1 to 5 bar
> Flow: 3 l/min at 3 bar - 4 position-setting Anti water-hammer system
> 15 seconds - lever upwards or downwards
> Hydraulic supply: 2 PEX hoses DN8 G3/8'' - 350mm
> Thermal resistance: This tap can withstand a thermal shock of 75°C for 30 minutes as part of a thermal shock programme
> Convenience: Soft-touch Two-coloured ergonomic lever, in glass fiber reinforced polymer
> Installation: Cross-partition Wall thickness: 0 to 50 mm
> Delivered with: 2 PEX hoses with swivel nut and NF check valves 2 MM 3/8'' (12x17) stop valves 2 Filter gaskets 1 clamping nut > Standards / Approvals: Chrome-plated brass body compliant with standards NF EN1982 / NF EN12164 / NF EN12165 Nickel-Chrome surface treatment compliant with NF EN12540 Neutral Salt Spray (NSS) resistant: 200 h according to NF ISO 9227
> Working pressure: 1 to 5 bar
> Flow: 3 l/min at 3 bars - 4-position setting Anti water-hammer system
> Flow time: 7 seconds - lever upwards 11 seconds - lever downwards
> Hydraulic supply: G 1/2'' x 15
> Thermal resistance: This tap can withstand a thermal shock of 75°C for 30 minutes as part of a thermal shock programme > Safety: With S® antiblocking system to prevent blocking in continuous flow
> Convenience: Soft-touch Two-coloured ergonomic lever, in glass fiber reinforced polymer
> Delivered with: 1 Filter gasket 1 coloured sticker
> Standards / Approvals: Chrome-plated brass body compliant with standards NF EN1982 / NF EN12164 / NF EN12165 Nickel-Chrome surface treatment compliant with NF EN12540 Neutral Salt Spray (NSS) resistant: 200 h according to NF ISO 9227
Dushiotsik antivandaalne ülemine paigaldus, 1/2" F
D40x40mm
> Working pressure :
1 to 5 bar
> Flow :
1.9 l/min with integrated flow limiter sprayer High quality anti-limescale aerator Anti-water-hammering device
> Hydraulic supply :
G 3/8" (12x17)
> Power supply :
Integrated 6V CRP2 lithium battery in a waterproof case, located inside the tap body.
> Material and colour finish :
Injected molded metal body Chrome plated cover
> Thermal resistance :
Resistant to a temperature of 75°C for 30 minute thermal shocks
> Security :
Maximal limited temperature by ajustable temperature limitor device
The solenoid valve will be closed automatically in case of over flow (>30 seconds), low battery or any damage of detector Patented anti-blocking "S" system to avoid the water to flow continuously
> Delivered with :
1 Brass clamping nut
1 Gasket and 1 Washer
2 PEX Hoses with revolving nuts and NF check valves 2 Filter gaskets
1 Self-adhesive sticker
Instruction manual
> Standards & approvals :
Brass in accordance with EN1982, EN12164, EN12165
200-hour neutral salt spray resistant (NSS) in accordance with ISO 9227
