Tootegrupid

Dušipaneel Delabie SECURITHERM termostaadiga electronic 6V ALU 792410

Tootekood: DE-792410
Kaubamärk:
Ühik: tk
Tarneaeg: 14-21 päeva
Hind: 1581,00 €
1422,90 €
Kuumakse alates: 120,95 €
Kogus: - +

Dušipaneel Delabie SECURITHERM termostaadiga electronic 6V ALU 792410

SECURITHERM shower panel 
Ref. 792410

Electronic thermostatic shower panel: 
Anodised aluminium shower panel for wall-mounted, exposed installation. 
With concealed inlet via flexibles, M1/2".
SECURITHERM thermostatic mixer. 
Adjustable temperature control from cold water up to 38°C with 1st limiter set at 38°C and 2nd limiter set at 41°C. 
Anti-scalding safety: automatic shut-off if cold or hot water supply fails. 
Thermal shocks are possible. 
Battery-operated with 223 6V Lithium battery. 
Infrared presence detection. Shower starts when hand is 4cmfrom the sensor. 
Shuts off on demand or automatically after ~60 seconds. 
Duty flush (~60 seconds every 24 hours after the last use). 
Flow rate set at 6 lpm at 3 bar. 
Chrome-plated, tamperproof, scale-resistant ROUND shower head with automatic flow rate regulation. 
Concealed fixings.
Filters and non-return valves.

Technical features 

SECURITHERM shower panel 
Ref. 792410

Supply 6V battery
Connector M1/2"
Technology Electronic
Height 1050mm
Depth 65mm
Width 210mm
Flow rate 6 lpm
Temperature limiter Thermostatic
Finish Aluminium
Sarnased tooted

Antivandaalne R/V teras piezo dušisi nupp, eelsegatud veele,  ilma el.adaptorita AZP Brno AUS 11

 
Antivandaalne R/V teras piezo dušisi nupp, eelsegatud veele,  ilma el.adaptorita
 
 

AUS 11

Pressure button-controlled shower for heat regulated water

 

 

   
 
 
 

AUS 11 is a new type of shower fitting for single shower control. The fitting is designated for premixed water – with one water inlet and shower outlet elbow. Water is released and closed by an anti-vandal pressure button connected to electronics and an electromagnetic valve. The fitting is covered by a rust-free anti-vandal cover to prevent damage. 

The mounting system has been designed so as to make removing the cover without using tools impossible with no bolt or screw being visible. The cover can be "pushed into" the wall level even if the mount box has been walled to an incorrect depth. 

AUS 11 is identical to AUS 1P with a different design and very resistant cover sheet. 

Electronics can work in two modes: 

1) The button works on the START/STOP basis – water release/closing. If the water is not turned off upon the time adjusted by the user or manager (e.g. 20 seconds), the electronic system itself instructs water stopping. The user must press again to start water running. This significantly saves water as the user reduces the showering time. 

2) The button works on the START/STOP basis. After the time adjusted by the manager (e.g. 3 minutes) expires there is a forced break when water cannot be released. During this time, the user is forced to leave the shower or wait. This prevents needless showering – water wasting. 

 

 
Basic technical information
Water input: G 1/2“
Water pressure: 1 - 10 Bar (0,1 – 1,0 MPa)
Time of water flow: 10 s – 42,5 min in mode 1
  0 s - 42,5 min in mode 2
Power supply: 12 V, 50 Hz
Power requirement: 6 VA
Source of power supplz: ZAC 1/20 (max. 3× AUS 11)
  ZAC 1/50 (max. 8× AUS 11)
Weight: 2,0 kg
 
 
Requirements for setting up the construction
  1. Water installation set up as per picture
  2. Set-up alcove 150 x 75 mm for installation casket
  3. Set-up cable for power supply – 12 V, 50 Hz from source of power supply ZAC
 
 
Complete delivery
  • installation casket
  • input and output bolting
  • electromagnetic valve
  • spherical valve
  • covering metal plate with piezo button
  • electronics
 
 
Made to order
  • SP 1 – shower arm with water flow of 9 l/min
  • SP 2 – shower arm with water flow of 7 l/min
  • SP 3 – shower arm with water flow of 7 l/min
  • ZAC - source of power supply 12V, 50Hz
 
 
Figure
 
 
A - water inlet G 1/2"
C - electricity supply cable 12 V, 50 Hz 
G - water outlet into shower armG 1/2"
 
 
 
 
Download information about the product
AUS 11 data for projectants - ( 84 kB )
 
Tootekood: AZP-AUS-11 ,   Tarneaeg: 3-4 nädalad ,   Viimistlus:
381,15 €

Dušikomplekt ALPA isesulguv, 30 sek 3bar, kroom-must nupp PRESTO 35815

35815

Vajutava nupuga dušši segisti 

ALPA

Presto

kroom-must nupp

30 sek. töötsükkel 3 bar

 

Tootekood: P-35815 ,   Tarneaeg: 14-21 päev ,   Viimistlus:
697,50 € (10%)
775,00 €

Dušipaneel PRESTOTEM2 ALPA S® isesulguv - 30 sek töötsükkel,  antiblock system PRESTO

88812

> Working pressure :

1 to 5 bar

> Flow :

6 l/min with integrated flow limiter Anti-water-hammering device
Rotating shower head with anti-limescale spikes

> Flow time :

30 seconds (± 5 sec.)

> Hydraulic supply :

G 1/2" (15x21), top or rear water inlet. For rear water inlet, we recommend to use the adaptation kit under the reference 91026. On ALPA S® NF IB mixer tap with NF check valves

> Material :

Anodised aluminium extruded section (2.5mm thickness) Aluminium removable valve plate, peinted RAL 7005 colour High resistance RAL 7005 coloured ABS covers

> Functioning:

Wide opening panel without the need to dismantle from the wall and shower taps on a removable valve plate

> Thermal resistance :

Resistant to a temperature of 75°C for 30-minute-thermal-shocks

> Security :

Adjustable tamper-proof temperature limiter to prevent scalding
Patented anti-blocking "S" system preventing the water flows continuously

> Delivered with :

1/2" hoses with revolving nuts
MM 1/2" (15x21) straight stop valves and 250 micron filters Fastening screws and instruction manual

> Standards & approvals :

Brass body in accordance with EN 1982, EN 12164, EN 12165 Chrome-plated surface treatment in accordance with EN 12540 200-hour neutral salt spray resistant (NSS) in accordance with ISO 9227

Tootekood: P-88812 ,   Tarneaeg: 14-21 päeva ,   Viimistlus:
1177,20 € (10%)
1308,00 €

Dushipaneel kangsegistiga PRESTOTEM2 SINGLE CONTROL Presto

88816

> Working pressure :

1 to 5 bar

> Flow :

10 l/min with integrated flow limiter
Fixed shower head with anti-limescale spikes

> Hydraulic supply :

G 1/2" (15x21), top or rear water inlet. For rear water inlet, we recommend to add the adaptation kit under the reference 91026 Single control mixer tap with ceramic disks

> Material :

Anodised aluminium extruded section (2.5mm thickness) Aluminium removable valve plate, peinted RAL 7005 colour High resistance RAL 7005 coloured ABS covers

> Functioning:

Wide opening panel without the need to dismantle from the wall and shower taps on a removable valve plate

> Thermal resistance :

Resistant to a temperature of 75°C for 30-minute-thermal-shocks

> Security :

Adjustable tamper-proof temperature limiter to prevent scalding

> Delivered with :

1/2" hoses with revolving nuts
MM 1/2" (15x21) straight stop valves and 250 micron filters Fastening screws and instruction manual

> Standards & approvals :

Brass body in accordance with EN 1982, EN 12164, EN 12165 Chrome-plated surface treatment in accordance with EN 12540 200-hour neutral salt spray resistant (NSS) in accordance with ISO 9227

Tootekood: P-88816 ,   Tarneaeg: 14-21 päeva ,   Viimistlus:
1110,60 € (10%)
1234,00 €

Mora Cera Duo Mini-Profi köögisegisti, infrapuna sensoriga 242402

Mora Cera Duo Miniprofi

Mora CeraDuo miniprofi brings the benefits from a professional restaurant kitchen to your private home. The sensor function makes the mixer more hygienic aswell as watersaving and environmentalfriendly. A convenient cleaning mode, and a removable nozzle with two spray-modes are included. Mora Cera Duo miniprofi makes your life in the kitchen easier, more environmentalfriendly and best of all- more good looking.

 

Technical information & spareparts

  • ESS (energy saving system)
  • Ceramic cartridge with soft closing function
  • Swivel spout, limitation part for 60°, 85°, 110° or 360° included
  • Nozzle with two spray patterns (normal and rinse)
  • Flush Timeout - safety shut-off to prevent flooding
  • Can be turned off for 5 min. (eg for cleaning)
  • Low power consumption - Long life
  • IP class sensor, IP67
  • Approved non-return valves, EN-Standard EN1717 

    Installation:
  • Automatic sensor calibration
  • All models can be adapted for either battery 6V or mains operation 12V AC/DC
  • Mains operation requires installation of the AC adapter art.no. 729478.AE and power supply art.no. 729470, alternatively transformer art.no. 729475
  • Soft PEX® hoses with 3/8" connecting nut (stainless steel braided)
  • Hole diameter Ø34-37 mm

    Settings:
  • Programmable detection distance
  • Adjustable flush time
Tootekood: FMO-242402 ,   Tarneaeg: 14-21 päeva ,   Viimistlus:
935,00 €

PEGU.ee – ekspertide loodud sanitaartehnika ja vannitoa sisustuslahenduste platvorm. Iga segisti ja vannitoa aksessuaar on valitud isikliku kogemuse ja professionaalse teadmise põhjal. Teid nõustab sanitaartehnika peaspetsialist rohkem kui 25-aastase kogemusega. Kontakt: info@pegu.ee · +372 515 0681