✅ Enamik populaarseid tooteid on laos olemas — tarneaeg 1–3 päeva või ise järeletulemine.
Kui toode on tellimisel, kontrolli tarneaega või küsi täpsust e-postil: info@pegu.ee
Kui soovid e-arvet, lisa palun vastav märge tellimuse kommentaaridesse.
Cast brass body
Anti-limescale and self-lubricant material valve
Progressive stop without water hammer
Fastenings included
Dušipaneel SPA SLIM 25 sekund eelsegatud veele
IDRAL 09290
Veekraan kontaktivaba WaterTap
DAN DRYER 390
390-WATERTAP WALL MOUNTED
DAN DRYER WaterTap is with automatic sensor for touch-free operation is a hygienic solution for all private and commercial washrooms.
The water faucet is part of a complete product line, which also includes hand dryer and soap dispenser. The product line is available for either deck or wall mounting.
The water tap features a minimalist, modern design in stainless steel with satin finish. It is easy to operate and to clean.
• Wall mounting.
• Activation distance adjustable between 20-120 mm.
• Water pressure: 10-15 PSI.
• Water flow less than 3,8 l/m.
• Stainless steel with satin finish.
• Infra-red sensor and elektronic timer.
• 2-year warranty.
Dushipaneel PRESTOTEM2 P50 TM liftiga 30 sek töötsükkel, termostaadiga PRESTO
88802
> Working pressure : 1 to 5 bar
> Flow : 6 l/min with integrated flow limiter Anti-water-hammering device Hand-held shower on rail with chrome plated slide
> Flow time : 30 seconds (± 5 sec.)
> Hydraulic supply : G 1/2"(15x21), top or rear water inlet. For rear water inlet, we recommend to add the adaptation kit under the reference 91026. On P 50 tap NF II and thermostatic mixer tap EN 1111 (NF check valves)
> Material : Anodised aluminum profile (2.5mm thickness) Aluminum removable valve plate, peinted RAL 7005 High resistance RAL 7005 coloured ABS casings
> Functioning: Wide opening panel without the need to dismantle from the wall and shower taps on a removable valve plate
> Thermal resistance : Resistant to a temperature of 75°C for 30-minute-thermal-shocks
> Security : Anti-scald system: flow is immediately stopped if the cold water is cut off Maximum delivered temperature : pre-fixed at 38°
> Delivered with : 1/2" hoses with revolving nuts MM 1/2" (15x21) straight stop valve and 250 micron filters Fastening screw and instruction manual > Standards & approvals : Brass body in accordance with EN 1982, EN 12164, EN 12165 Chrome-plated surface treatment in accordance with EN 12540 200-hour neutral salt spray resistant (NSS) in accordance with ISO 9227
Dušipaneel eelsegatud veele, isesulguv PRESTOTEM2 P50, 30 sek töötsükkel, Anti-legionella PRESTO
88824
> Working pressure :
1 to 5 bar
> Flow :
6 l/min with integrated flow limiter. Anti-water-hammering device Fixed rotating shower head with anti-limescale spikes
> Flow time :
30 seconds (± 5 sec.)
> Hydraulic supply :
G 1/2" (15x21), top or rear water inlet. For rear water inlet, we recommend to add the adaptation kit under the reference 91026 On P 50 tap NF II with cold water or pre-mixed water
> Material :
Anodised aluminium extruded section (2.5mm thickness) Aluminum removable valve plate, peinted RAL 7005 colour High resistance RAL 7005 coloured ABS covers
> Functioning:
Wide opening panel without the need to dismantle from the wall and shower taps on a removable valve plate
> Thermal resistance :
Resistant to a temperature of 75°C for 30-minute-thermal-shocks
> Security :
"Legionella" version: pre-equipped for PRESTO solutions
Non turnable push button. Non-removable, wear-proof red marker
> Delivered with :
1/2" hoses with revolving nuts
MM 1/2" (15x21) straight stop valves and 250 micron filters Fastening screws and instruction manual
> Standards & approvals :
Brass body in accordance with EN 1982, EN 12164, EN 12165 Chrome-plated surface treatment in accordance with EN 12540
200-hour neutral salt spray resistant (NSS) in concordance with ISO 9227
Presto NOVA IR kraan eelsegatud veele AC kroom
55381
> Working pressure : 1 to 5 bar
> Flow : 1.9 l/min with integrated flow limiter High quality anti-limescale aerator Anti-water-hammering design
> Hydraulic supply : G 3/8" (12x17) - Cold or premixed water > Power supply : 230 VAC / 7 VDC transformer in IP65 waterproof case
> Material and colour finish : Injected molded metal body and cover Chrome finishing
> Thermal resistance : Resistant to a temperature of 75°C for 30-minute-thermal-shocks
> Security : Anti-overflow security time: 30 seconds Anti-blocking system preventing the water to flow continuously
> Delivered with : 1 Brass clamping nut 1 Gasket and 1 Washer 1 Hose with revolving nut 1 Stop valve MM G 3/8" (12x17) 1 Filter gasket 1 Self-adhesive sticker Instruction manual
> Standards & approvals : Brass body in accordance with NF EN1982, EN12164, NF EN 12165 200-hour neutral salt spray resistant (NSS) in accordance with NF ISO 9227
PEGU.ee — Iga segisti ja aksessuaar on valitud isikliku teadmise ja kogemusega. Teid nõustab **sanitaartehnika peaspetsialist, 25+ aastat kogemust.** Kontakt: info@pegu.ee · +372 515 0681
Copyright ⓒ 2016-2025 www.pegu.ee Kõik õigused kaitstud. Pegu OÜ
