Kätepaberidosaator sensoriga Wagner Ewar 1+1 roll pattareiga R/V teras satiin WP1401S
Kaubamärk:
Ühik: tk
Tarneaeg: 14-21 päeva
Ära maga sügist maha koos PEGU.EE-ga!
Kasuta ostukorvis sooduskoodi OKTOOBER2026 ja saa soodustust!Pakkumine kehtib kuni 31.10.2026.
Lisa toode korvi ja vali tarnemeetod. Registreerumine pole kohustuslik!⚡
ℹ️ Hind sisaldab käibemaksu.
▼ Loe edasi: ...
✅ Populaarsed tooted Tallinna laos kohe olemas — tarneaeg 1–3 päeva või tule ise järele.
✅ Kui toode on tellimisel, uuri lähemalt — saame tihti pakkuda oodatust kiiremat tarnet: info@pegu.ee
✅ Kõikidele toodetele garantii 2 aastat ja 14‑päevane tagastusõigus.
✅ Automaatne arve e‑postile. E‑arve soovijatel palume lisada märge kommentaaridesse.
ℹ️ Hind sisaldab käibemaksu.
Parimaks tulemuseks kasuta pilti ilma taustata
Hind:
1060,00 €
![]()
Kuumakse alates: 81,09 €
954,00 €
Kätepaberidosaator sensoriga Wagner Ewar 1+1 roll pattareiga R/V teras satiin WP1401S
ELECTRONIC TOUCH-FREE PAPER ROLL DISPENSER WITH RESERVE ROLL BATTERY POWERED WP 1401
350 x 580 x 210 mm
1 paper roll + 1 reserve roll
Choose product variant
- Sensor paper roll dispenser with cabinet for reserve roll, battery-powered, in robust, germ-reducing and easy-care stainless steel (AISI 304).
- All-stainless steel housing; all corners fully welded, visible surfaces satin finished and brushed with tapered glossy surface at the bottom.
Further available surfaces: see below. - With touch-free operated, capacitive sensor technology, sensor distance approx. 3.5 cm.
Paper length and idle time adjustable.
Battery-powered with four standard 1.5 V Mono/LR20/12 A batteries. - Designed for one paper roll and one reserve roll with dimensions: Width 215 mm, outer diameter max. 180 mm, inner diameter 50 mm.
- Inspection slot to indicate fill level, residual roll function allows a reserve roll to be inserted before residual roll is completely used up.
- Accessible for refilling through lockable door.
- Keyed alike cylinder lock in corrosion-resistant zinc die-casting.
- Wear parts can be replaced as modules.
- Mounting: With four screws through key holes in the back wall.
- Delivery includes fixing material and first fill with one paper roll.
- Weight (in kg): 12,4
| AVAILABLE SURFACES | ORDER NUMBERS |
|---|---|
| satin finished (standard) | 733260 |
| highly polished | 732260 |
| (coloured) plastic powder - coating | 728260 |
Suggested text for specifications:
Sensor paper roll dispenser with cabinet for reserve roll, battery-powered, in stainless steel (AISI 304) for surface mounting. All-stainless steel housing; all corners fully welded, visible surfaces satin finished and brushed with tapered glossy surface at the bottom. With touch-free operated, capacitive sensor technology. Paper length and idle time adjustable. Battery-powered with four standard 1.5 V Mono/LR20/12 A batteries. Designed for one paper roll and one reserve roll with dimensions: Width 215 mm, outer diameter max. 180 mm, inner diameter 50 mm. Inspection slot to indicate fill level. Accessible for refilling through lockable door. Residual roll function allows a reserve roll to be inserted before residual roll is completely used up. Keyed alike cylinder lock in corrosion-resistant zinc die-casting. Delivery includes fixing material and first fill with one paper roll.
Dimensions: 350 x 580 x 210 mm
Article No. WP1401
Sensor paper roll dispenser with cabinet for reserve roll, battery-powered, in stainless steel (AISI 304) for surface mounting. All-stainless steel housing; all corners fully welded, visible surfaces satin finished and brushed with tapered glossy surface at the bottom. With touch-free operated, capacitive sensor technology. Paper length and idle time adjustable. Battery-powered with four standard 1.5 V Mono/LR20/12 A batteries. Designed for one paper roll and one reserve roll with dimensions: Width 215 mm, outer diameter max. 180 mm, inner diameter 50 mm. Inspection slot to indicate fill level. Accessible for refilling through lockable door. Residual roll function allows a reserve roll to be inserted before residual roll is completely used up. Keyed alike cylinder lock in corrosion-resistant zinc die-casting. Delivery includes fixing material and first fill with one paper roll.
Dimensions: 350 x 580 x 210 mm
Article No. WP1401
Sarnased tooted
Kätepaberidosaator MEDICLINICS DT2106 teras, valge epoksükate
Korpuse paksus 0,8 mm
teras, epoksükate
kaal 1,8 kg
Rätikud max 260x100mm
C/Z volditud rätikute mahutavas 400-600 tk
Tootekood: MD-DT2106
, Tarneaeg: 7 päeva
, Viimistlus:
61,20 € (10%)
68,00 €
68,00 €
Kätepaberidosaator Mediclinics DT2106C R/V teras, poleeritud
Korpuse paksus 0,8 mm
Roostevaba teras AISI 304, poleeritud
kaal 1,8 kg
Rätikud max 260x100mm
C/Z volditud rätikute mahutavas 400-600 tk
Tootekood: MD-DT2106C
, Tarneaeg: 14 päeva
, Viimistlus:
99,00 € (10%)
110,00 €
110,00 €
Bobrick Vedelseebidosaator seinale 1,2L, horisontaalne R/V teras B-2112
Seebidosaator horisontaalne
R/V teras AISI 304,
1,2L
Bobrick
Tootekood: BOB-2112
, Tarneaeg: 5-6 nädala
, Viimistlus:
170,00 €
Mediclinics Kätekuivati Mediflow basic sensor roostevaba teras AISI304, harjatud
M03ACS
Elektriisolatsioon klass II
Voolutarve 12A
Kuivatuseag 29 sek
Koguvõimsus 2750W
Kaitseklass IP23
Müratase 65dB (2 m kaugusel)
Tootekood: MM03ACS
, Tarneaeg: 7-14 päeva
, Viimistlus:
432,00 € (10%)
480,00 €
480,00 €
Vedelseebidosaator R/V teras, matt 950 ml pudeliga Wagner Ewar WP102S
Seebidosaator
harjatud, R/V teras AISI304
Maht 950ml
Liquid soap dispenser WP102
80 x 298 x 120 mm 950 ml bottle
- Liquid soap dispenser in robust, germ-reducing and easy-care stainless steel (AISI 316L).
- All-stainless steel housing; all corners fully welded, visible surfaces satin finished and brushed.
Further available surfaces: see below. - One-hand operated and non-drip soap pump.
- Designed for standard 950 ml disposable bottles of liquid soap or hand lotion.
Also refillable with large container using the plug-in tank as an option. - Inspection slot to indicate fill level. Accessible for refilling through lockable, hinged housing.
- Keyed alike cylinder lock in corrosion-resistant zinc die-casting.
- Wear parts can be replaced as modules.
- Mounting: With two screws through key holes and one optional anti-theft hole in the back wall.
- Delivery includes fixing material and first fill with soap.
- Weight (in kg): 2.4
Available surfaces
Order numbers
satin finished (standard)
727302
highly polished
731302
(coloured) plastic powder - coating
728076
Tootekood: WAG-WP102S
, Tarneaeg: 14 päeva
, Viimistlus:
306,00 € (10%)
340,00 €
340,00 €
