Tootegrupid
Kaubamärgid
Blogi Uudised
Esileht » Delabie Kirurgiline valamu madala pritsmekaitsega "Hygiene+" 1 töökoht AISI304 L700mm 185020
Delabie Kirurgiline valamu madala pritsmekaitsega Zoom
Delabie Kirurgiline valamu madala pritsmekaitsega Delabie Kirurgiline valamu madala pritsmekaitsega Delabie Kirurgiline valamu madala pritsmekaitsega

Delabie Kirurgiline valamu madala pritsmekaitsega "Hygiene+" 1 töökoht AISI304 L700mm 185020

Tootekood: DE-185020
Kaubamärk:
Ühik: tk
Tarneaeg: 14-21 päeva

‼️ Kasuta promokoodi SUVI2026 ostukorvis ja saa soodustust – ainult täna!

▼ Loe edasi: ...

✅ Populaarsed tooted Tallinna laos kohe olemas — tarneaeg 1–3 päeva või tule ise järele.

✅ Kui toode on tellimisel, uuri lähemalt — saame tihti pakkuda oodatust kiiremat tarnet: info@pegu.ee

✅ Kõikidele toodetele garantii 2 aastat ja 14‑päevane tagastusõigus.

✅ Automaatne arve e‑postile. E‑arve soovijatel palume lisada märge kommentaaridesse.

ℹ️ Hind sisaldab käibemaksu.

ESTO järelmaks kuumaks al. 248,71 €
Hind:
2926,00 €
Kuumakse alates: 248,71 €
Kogus: - +

Delabie Kirurgiline valamu madala pritsmekaitsega "Hygiene+" 1 töökoht AISI304 L700mm 185020

Kirjeldus:

Ref. 185020 kirurgiline valamu on mõeldud spetsiaalselt haiglate ja tervishoiuasutuste vajadustele. Valmistatud bacteriostatic 304 roostevabast terasest ja varustatud innovatiivse "Hygiene+" disainiga, mis vähendab bakterite arenguks sobivaid alasid ja tagab lihtsa puhastamise. Valamul on madal pritsmekaitse (75 mm), parem äravool ja kinnitusdetailid.

Peamised omadused:

  • Seinakinnitusega disain
  • Madal pritsmekaitse: 75 mm
  • "Hygiene+": varjatud äravool, bakterite arengualade vähendamine
  • Sile pind ja varjatud sifoon lihtsaks puhastamiseks
  • Valmistatud bacteriostatic 304 roostevabast terasest
  • Paksus: 1,2 mm
  • Ilma segistiaukudeta
  • CE-sertifikaat, vastab EN 14296 standardile
  • Mõõdud: kõrgus 645 mm, laius 400 mm, pikkus 700 mm
  • Kaal: 15,6 kg

 

Surgical scrub-up trough with low upstand 
Ref. 185020

Wall-mounted surgical scrub-up trough with 75mm upstand. 
Suitable for hospitals and healthcare facilities. 
Bacteriostatic 304 stainless steel. Polished satin finish. Stainless steel thickness: 1.2mm. 
Length 700mm, 1 service. Without tap hole. 
Smooth surface for easy cleaning. 
"Hygiene+": reduces niches where bacteria can develop, concealed trap, easy to clean.
Drainage on the right. Without overflow. Supplied with fixing elements.
Weight: 15.6kg.

Failid

Sarnased tooted
AZP Brno adapter 1-3 punkte ZAC 1-20
AZP Brno adapter 1-3 punkte ZAC 1-20

AZP Brno adapter 1-3 punkte ZAC 1-20

 
 

ZAC 1/20, ZAC 1/50, ZAC 1/36L

power supply

    
 
 
 

ZAC is a safe source of voltage supply intended to power automatic sanitary equipment made by AZP Brno, Ltd. 

The source of power supply consists of a safety transformer produced in accordance with ČSN IEC 742+A1 standards. All kinds of sensors can be connected to these sources in random combinations, as can other devices with a supply voltage of 12 V, 50 Hz (total power requirement either 20 VA, 50 VA or 36 VA). 

ZAC 1/20 and ZAC 1/50 are independent sources, 1/36L ZAC is the source for the location on the DIN-rail (4 modules).

 
 
Version types
ZAC 1/20 - source of power supply with output 20 VA
ZAC 1/50 - source of power supply with output 50 VA
ZAC 1/36L - source of power supply with output 36 VA
 
Source of power supply can be placed at a maximum distance of 30 m from the connected appliance. 
 
Basic technical information
Input voltage: 230 V, 50 Hz
Output voltage: 12 V, 50 Hz
Power requirement: 20 VA (ZAC 1/20)
  50 VA (ZAC 1/50)
  36 VA (ZAC 1/36L)
Electricity protection: IP 55 (ZAC 1/20, ZAC 1/50)
  IP 20 (ZAC 1/36L)
Weight: 0,8 kg (ZAC 1/20, ZAC 1/36L)
  1,2 kg (ZAC 1/50)
 
 
Requirements for setting up the construction
ZAC 1/20, ZAC 1/50
  1. Set-up supply of electricity 230 V,50 Hz – cable CYKY 3Cx1,5
  2. Set-up niche for flush mounting – size as per installed source
  3. Distribution to each device is carried out by cable CYKY 2Ax1,5
ZAC 1/36 L
  1. It is installed on the DIN-rail - width of 4 modules
 
 
Figure
ZAC 1/20
 
ZAC 1/50
 
 
 
 
 
Product title
ZAC 1/20 - 
power supply for up to 3 devices - 230V, 50Hz
ZAC 1/50 - 
power supply for up to 8 devices - 230V, 50Hz
ZAC 1/36L - 
power supply for up to 6 devices - 230V, 50Hz
Tootekood: AZP-ZAC 1-20 ,   Tarneaeg: 3-4 nädalad ,   Viimistlus:
106,72 €
Turvavalamu LVR-36-S, sifoon, valamu sees PORTINOX
Turvavalamu LVR-36-S, sifoon, valamu sees PORTINOX

Turvavalamu LVR-36-S, sifoon, valamu sees PORTINOX

500x490x300 

R/V teras AISI 304

Tootekood: PLVR-36S ,   Tarneaeg: 2-3 nädalad ,   Viimistlus:
974,72 €
Joogifontään seinale mehaaniline R/V teras AISI304 AZP Brno AFO01
Joogifontään seinale mehaaniline R/V teras AISI304 AZP Brno AFO01

Joogifontään seinale mehaaniline R/V teras AISI304 AZP Brno AFO01

AFO 01 stainless steel wall-mounted drinking fountain

 

AFO 01 is a stainless steel wall-mounted drinking fountain of modern design with a manual press valve that allows its easy use. The water flows only when the valve is pressed and then there is a certain adjusted time to rinse out the nozzle.
The water inlet is fitted with a flexible hose, the siphon is made from a stretchy, flexible connector. The flexible finish of the water inlet and outlet allows the variable and problem-free connection of the fountain.
AFO 01 stainless steel fountain is suitable mainly for schools, medical facilities and spa resorts, and is utilizable outdoors.
AFO 01 is made of stainless steel AISI 304.
AFO 01.CL is made of stainless steel AISI 316 and is suitable into the areas with higher concentration of chlorine (e.g. swimming pools).
Sensor-controlled fountain possible made to order.
For cleaning we recomnned WÜRTH detergents – material preservation (no. 0893 121 K) and material cleaning (no. 893 121 1).

Package contents

  • stainless steel sink with casing
  • press valve
  • corner valve with filter
  • flexible hose siphon
  • fixing bar
  • connecting hoses
  • anchoring material
Water inlet G 1/2"
Water pressure 0,2 – 0,6 MPa (recommended 0,3 MPa)
Outlet d = 40 mm
Inner dimension of the fountain d = 245 mm
Weight 4 kg

 

Tootekood: AZP-AFO01 ,   Tarneaeg: 3-4 nädala ,   Viimistlus:
777,54 €
Joogifontään seinale mehaaniline R/V teras AISI316 (basseinid) AZP Brmo AF001.CL
Joogifontään seinale mehaaniline R/V teras AISI316 (basseinid) AZP Brmo AF001.CL

Joogifontään seinale mehaaniline R/V teras AISI316 (basseinid) AZP Brmo AF001.CL

AFO 01 stainless steel wall-mounted drinking fountain

 

AFO 01 is a stainless steel wall-mounted drinking fountain of modern design with a manual press valve that allows its easy use. The water flows only when the valve is pressed and then there is a certain adjusted time to rinse out the nozzle.
The water inlet is fitted with a flexible hose, the siphon is made from a stretchy, flexible connector. The flexible finish of the water inlet and outlet allows the variable and problem-free connection of the fountain.
AFO 01 stainless steel fountain is suitable mainly for schools, medical facilities and spa resorts, and is utilizable outdoors.
AFO 01 is made of stainless steel AISI 304.
AFO 01.CL is made of stainless steel AISI 316 and is suitable into the areas with higher concentration of chlorine (e.g. swimming pools).
Sensor-controlled fountain possible made to order.
For cleaning we recomnned WÜRTH detergents – material preservation (no. 0893 121 K) and material cleaning (no. 893 121 1).

Package contents

  • stainless steel sink with casing
  • press valve
  • corner valve with filter
  • flexible hose siphon
  • fixing bar
  • connecting hoses
  • anchoring material
Water inlet G 1/2"
Water pressure 0,2 – 0,6 MPa (recommended 0,3 MPa)
Outlet d = 40 mm
Inner dimension of the fountain d = 245 mm
Weight 4 kg

 

Tootekood: AZP-AF001.CL ,   Tarneaeg: 3-4 nädala ,   Viimistlus:
1092,62 €
Joogifontään AFO04 seinale mehaaniline R/V teras AISI304 AZP Brno AFO04
Joogifontään AFO04 seinale mehaaniline R/V teras AISI304 AZP Brno AFO04

Joogifontään AFO04 seinale mehaaniline R/V teras AISI304 AZP Brno AFO04

AFO 04

suspension drinking fountain

 

AFO 04 is a stainless-steel drinking fountain of a modern design. It is manufactured with a double surface finish: matt bowl (blasted with ballotini) and brushed casing. Thanks to its interesting appearance, it particularly suits public spaces, such as sports facilities, parks, squares, business centres, fitness and wellness centres, but also schools and kindergartens.

Similarly to AFO 01, the drinking fountain is operated with a push valve. Water is flowing while the valve is pushed and for a preset time after its release, in which way the nozzle is rinsed. 

The water inlet is through a flexible hose; siphon trap is made of a flexible coupling. The flexible design of the water inlet and outlet enables variable and trouble-free connection of the fountain as well as its simple dismounting.

The AFO 04 drinking fountain is made from stainless steel of the AISI 304 class; the AFO 04.CL drinking fountain is made from steel of the AISI 316 class.

Package contents

  • stainless steel casing
  • press valve
  • corner valve with filter
  • fixing bar
  • siphon
  • connecting hose
  • anchoring material
Water inlet G 1/2"
Water pressure 2 - 6 Bar (recommended 3 Bar)
Outlet d = 40 mm
Inner dimension of the fountain d = 245 mm
Weight 4 kg
  • Set-up water inlet - pipe G1/2“.
  • Set-up drainage d = 40 mm.

 

 
Tootekood: AZP-AFO04 ,   Tarneaeg: 3-4 nädalad ,   Viimistlus:
936,10 €

PEGU.ee – ekspertide loodud sanitaartehnika ja vannitoa sisustuslahenduste platvorm. Iga segisti ja vannitoa aksessuaar on valitud isikliku kogemuse ja professionaalse teadmise põhjal. Teid nõustab sanitaartehnika peaspetsialist rohkem kui 25-aastase kogemusega. Kontakt: info@pegu.ee · +372 515 0681