Delabie Kirurgiline valamu madala pritsmekaitsega "Hygiene+" 1 töökoht AISI304 L800mm 18502015
Kaubamärk:
Ühik: tk
Tarneaeg: 14-21 päeva
Lisa toode korvi ja vali tarnemeetod. Registreerumine pole kohustuslik!⚡
▼ Loe edasi: ...
✅ Populaarsed tooted Tallinna laos kohe olemas — tarneaeg 1–3 päeva või tule ise järele.
✅ Kui toode on tellimisel, uuri lähemalt — saame tihti pakkuda oodatust kiiremat tarnet: info@pegu.ee
✅ Kõikidele toodetele garantii 2 aastat ja 14‑päevane tagastusõigus.
✅ Automaatne arve e‑postile. E‑arve soovijatel palume lisada märge kommentaaridesse.
ℹ️ Hind sisaldab käibemaksu.
Delabie Kirurgiline valamu madala pritsmekaitsega "Hygiene+" 1 töökoht AISI304 L800mm 18502015
Kirjeldus:
Ref. 18502015 kirurgiline valamu on mõeldud spetsiaalselt haiglate ja tervishoiuasutuste vajadustele. Valmistatud bacteriostatic 304 roostevabast terasest ja varustatud innovatiivse "Hygiene+" disainiga, mis vähendab bakterite arenguks sobivaid alasid ja tagab lihtsa puhastamise. Valamul on madal pritsmekaitse (75 mm), parem äravool ja kinnitusdetailid.
Peamised omadused:
- Seinakinnitusega disain
- Madal pritsmekaitse: 75 mm
- "Hygiene+": varjatud äravool, bakterite arengualade vähendamine
- Sile pind ja varjatud sifoon lihtsaks puhastamiseks
- Valmistatud bacteriostatic 304 roostevabast terasest
- Paksus: 1,2 mm
- Ilma segistiaukudeta
- CE-sertifikaat, vastab EN 14296 standardile
- Mõõdud: kõrgus 645 mm, laius 400 mm, pikkus 800 mm
- Kaal: 17.2 kg
Surgical scrub-up trough with low upstand
Ref. 18502015
Suitable for hospitals and care facilities.
Complies with the former HTM64 guidance and new Health Building Note 00-10: Part C - Sanitary Assemblies.
Length 800mm, 1 service. Without tap hole.
Bacteriostatic 304 stainless steel. Polished satin finish. Stainless steel thickness: 1.2mm.
Smooth surface and rounded edges for easy cleaning.
"Hygiene +" design: reduces bacterial niches, concealed trap, easy to clean.
Drainage on the right.
Without overflow.
Supplied with fixing elements.
CE marked. Complies with norm EN 14296.
Weight: 17.2kg.
Failid
Joogifontaan Portinox FP-002 kinnitus seina, põrandani
Automatne kummikute pesur düüsiga, 12V, 50Hz RST AZP Brno AMO 01
Automatne kummikute pesur düüsiga, 12V, 50Hz
automatic washing system for wellingtons with jets - 12V, 50Hz
AMO 01 is a stainless steel automatic washing system for wellingtons with sensor-controlled water nozzles. When stepping into the washing chamber of the system (scanning zone) water starts to flow from the nozzles automatically and wellingtons are cleaned of dirt. Water stops flowing with a certain time delay after the foot has been removed from the scanning zone.
AMO 01 is designed for a single pipe inlet of pre-mixed water from the circulation or water pre-mixed by means of a thermostatic valve.
The AMO 01 automatic washing system is intended mainly for operations with slight shoe contamination where quick washing at maximum water savings is guaranteed.
Package contents
- body of the washing machine
- photocell head
- nozzles – 8 pcs
- electromagnetic valves 2 pcs
- corner valves with filter
- connecting hoses
| Radius of sensor | 0 – 0,4 m |
| Water inlet | G 1/2“ |
| Water pressure | 0,3 – 1,0 MPa |
| Outlet | d = 32 mm |
| Inner dimensions of the trough | 250 x 400 x 280 mm |
| Electricity protection | IP 55 |
| Power supply | 12 V, 50 Hz |
| Power requirement | 10 VA |
| Source of power supply | ZAC 1/20 (max. 2 x AMO 01) |
| ZAC 1/50 (max. 5 x AMO 01) | |
| Weight | 18 kg |
- Set up water inlet as per picture
- Set up outlet d = 32 mm
- Set up cable for power supply – 12 V, 50 Hz from source of power supply ZAC
Bobrick Riiul+nagid+Tööriista hoidik seinale , Mop and Broom Holder R/V teras AISI304 B-239x34
DESCRIPTION
Joogifontään põranda/sein mehaaniline R/V teras AISI304
AZP Brno AFO01.S
AFO 01.S
stainless steel drinking fountain with pressure valve designed to stand and to be attached to wall
AFO 01.S is a drinking fountain of stainless steel with pressure valve designed to stand and to be attached to wall. Water runs for the time for which the valve is pressed plus the pre-set period after it is released; thus the jet can be rinsed.
Water supply is provided by a flexible hose, trap comprises an elastic flexible couple. Flexible design of water supply and outflow allows variable and easy connection of the drinking fountain as well as its dismounting.
Automatic drinking fountain (with a sensor) can be supplied per order.
AFO 01.S is manufactured from the stainless steel AISI 304. Other materials (e.g. AISI 316) possible on order. For cleaning we recomnned WÜRTH detergents – material preservation (no. 0893 121 K) and material cleaning (no. 893 121 1).
Package contents
- Stainless housing with cone
- Pressure valve with jet
- Flexible hose outflow
- Fixing and connecting material
| dimensions | 330 x 900 x 365 mm |
| outlet | d = 40 mm |
| water inlet | G 1/2" |
| water pressure | 0,2 – 0,6 MPa, recommended 0,3 MPa |
| weight | 12 kg |
- Set up water outlet d = 40 mm
- Set up water inlet G 1/2"
Joogifontään veejahutussüsteemiga, pudeli taitmisega põrand/sein piezo nupp, R/V teras AISI304 230V/50Hz AZP Brno AFO01.SCL
AFO 01.SCL
drinking fountain with cooling and spout for filling bottles designed to stand and to be attached to wall
AFO 01.SCL is a drinking fountain with cooling and spout for filling bottles designed to stand and to be attached to wall. User can select between uncooled water and water running through a flow cooler. Uncooled water is used for bottle filling as a standard – can be changed. Start/stop control by piezo-buttons – resistant solution. Facility keeper can set a time period after which the water flow automatically stops.
The product contains a flow cooler. It is not a design with cooled tank only where – after the pre-cooled amount of water is pumped out – the user has to wait for the next charge to be cooled.
Water supply is provided by a flexible hose, trap comprises an elastic flexible couple. Flexible design of water supply and outflow allows variable and easy connection of the drinking fountain as well as its dismounting.
Automatic drinking fountain (with a sensor) can be supplied per order.
AFO 01.SCL is manufactured from the stainless steel AISI 304. Other materials (e.g. AISI 316) possible on order. For cleaning we recomnned WÜRTH detergents – material preservation (no. 0893 121 K) and material cleaning (no. 893 121 1).
Package contents
- Stainless housing with cone
- Electronics and control piezo-buttons
- Water supply and electromagnetic valves
- Flow cooler
- Flexible hose outflow
- Fixing and connecting material
| dimensions | 330 x 900 x 365 mm |
| water outlet | d = 40 mm |
| water inlet | G 1/2" |
| water pressure | 0,2 – 0,6 MPa, recommended 0,3 MPa |
| power supply | 230 V, 50 Hz |
| power input | 830 W |
| weight | 25 kg |
- Set up water outlet d = 40 mm
- Set up water inlet G 1/2"
- Electric socket 230 V, or set up electric cable CYKY 3C x 1,5
