Kombinatsioon seebidosaator 1000 ml mahuti, paberrätikute dosaator ca 250 paberrätikut Wagner Ewar WP506
Kaubamärk:
Ühik: tk
Tarneaeg: 14-21 päeva
‼️ Kasuta promokoodi TALV2026 ostukorvis ja saa soodustust – ainult täna!
✅ Enamik populaarseid tooteid on Tallinna laos kohe olemas — tarneaeg 1–3 päeva või ise järeletulemine.
✅ Kui toode on tellimisel, kontrolli tarneaega või küsi täpsust e-postil: info@pegu.ee
✅ Kõikidele toodetele kehtib garantii 2 aastat. Tavakaupadele (ilma eritellimuseta) tagastusõigus 14 päeva.
✅ Automaatne arve saatmine e-postile nii era- kui äriklientidele. E-arve soovijatel palume lisada märge kommentaaridesse.
Kombinatsioon seebidosaator 1000 ml mahuti, paberrätikute dosaator ca 250 paberrätikut Wagner Ewar WP506
COMBINATION SOAP- AND PAPER TOWEL DISPENSER WP 506
448 x 148 x 164 mm
ca. 250 paper towels / 1000 ml soap tank
- Combination consisting of a liquid soap dispenser and a paper towel dispenser in robust, germ-reducing and easy-care stainless steel (AISI 304).
- All-stainless steel housing; all corners fully welded, visible surfaces satin finished and brushed.
Further available surfaces: see below. - Liquid soap dispenser with one-hand operated and non-drip soap pump with 1000 ml tank and pressure valve in brass.
- Tank with large, lockable refill opening.
- Designed for standard liquid soaps. Accessible for refilling through lockable, removable front panel with fall protection.
- Paper towel dispenser with deep-drawn paper removal opening for easy paper removal.
- Designed for approx. 250 standard paper towels in zigzag- or c-fold.
Paper size (folded): 240-250 mm x 100-115 mm.
Accessible for refilling through lockable front flap. - Keyed alike cylinder locks in corrosion-resistant zinc die-casting.
- Wear parts and front panels can be replaced as modules.
- Installation dimensions: 450 x 150 x 154 mm
- Mounting: With four screws in wall opening through fixing holes in the side walls.
- Delivery includes fixing material and one pack of paper towels.
- Weight (in kg): 4,3
| AVAILABLE SURFACES | ORDER NUMBERS |
|---|---|
| satin finished (standard) | 727613 |
| highly polished | 731613 |
| (coloured) plastic powder - coating | 728613 |
Combination consisting of a liquid soap dispenser and a paper towel dispenser in stainless steel (AISI 304) for flush mounting. All-stainless steel housing; all corners fully welded, visible surfaces satin finished and brushed. Liquid soap dispenser with one-hand operated and non-drip soap pump with 1000 ml tank and pressure valve in brass. Designed for standard liquid soaps. Accessible for refilling through lockable, removable front panel with fall protection. Paper towel dispenser with deep-drawn paper removal opening, filling quantity approx. 250 paper towels. Accessible for refilling through lockable front flap. Keyed alike cylinder locks in corrosion-resistant zinc die-casting. Delivery includes fixing material and one pack of paper towels.
Dimensions: 448 x 148 x 164 mm
Article No. WP506
Failid
Katteraam WP506 roostevaba teras harjatud Wagner Ewar 768663
WP 506 COVERING FRAME 768663
for 448 x 148 mm
100,00 €
Nagi Wagner Ewar satiin R/V teras Wagner Ewar AC215S
Nagi, satiin
R/V teras AISI 303
Ø 45 x 36 mm
Wagner Ewar
75,00 €
WC paberi suure rulli hoidik, satiin Wagner Ewar WP163S
WC paberi suure rulli hoidik
R/V teras AISI 303, satiin
Wagner Ewar
WC paberi suure rulli hoidik
R/V teras AISI 303, satiin
Wagner Ewar
- Large roll dispenser in robust, germ-reducing and easy-care stainless steel (AISI 304).
- All-stainless steel housing; visible surfaces satin finished and brushed.
Further available surfaces: see below. - Designed for one standard large roll with dimensions:
Outer diameter max. 280 mm
Width max. 100 mm
Core diameter min. 40 mm - Spring pressure plate to prevent unintended unrolling.
- Inspection slot to indicate fill level.
- Accessible for refilling through lockable, hinged housing.
- Keyed alike cylinder lock in corrosion-resistant zinc die-casting.
- Wear parts can be replaced as modules.
- Mounting: With four screws through key holes and one optional anti-theft hole in the back wall.
- Delivery includes fixing material.
- Can be converted to WP163-S at a later time: Conversion kit ID 923 290.
- Weight (in kg): 4.8
472,00 €
Ophardt Hygiene Jalg dosaatorile RX5T 1422671
Jalg dosaatorile RX 5 T
Prügikast pinna alla 18L , R/V teras harjatud Wagner Ewar WP139S
WASTE BIN WP 139
298 x 448 x 310 mm
18 l
- Waste bin in robust, germ-reducing and easy-care stainless steel (AISI 304).
- All-stainless steel housing; all corners fully welded, visible surfaces satin finished and brushed.
Further available surfaces: see below. - Equipped with removable mesh basket. Capacity approx. 18 l. Accessible through lockable door with self-closing, flame-retardant disposal flap.
- Keyed alike cylinder lock in corrosion-resistant zinc die-casting.
- Wear parts can be replaced as modules.
- Mounting: With screws off-floor below vanity unit, or as an option with console or base for a surcharge.
- Delivery includes fixing material.
- Weight (in kg): 7,1
Suggested text for specifications:
Waste bin in stainless steel (AISI 304) for under-counter mounting. All-stainless steel housing; all corners fully welded, visible surfaces satin finished and brushed. Equipped with removable mesh basket. Capacity approx. 18 l. Accessible through lockable door with self-closing, flame-retardant disposal flap. Keyed alike cylinder lock in corrosion-resistant zinc die-casting. Delivery includes fixing material.
Dimensions: 298 x 448 x 310 mm
Article No. WP139
512,00 €
Desinfektandi dosaator puutevaba sensoriga 950ml , R/V teras satiin Wagner Ewar WP102e-7
SENSOR - DISINFECTANT DISPENSER 950ML TANK WP 102E-7
86 x 298 x 121 mm
- Sensor disinfectant dispenser in robust, germ-reducing and easy-care stainless steel (AISI 316L).
- All-stainless steel housing; all corners fully welded, visible surfaces satin finished and brushed.
Further available surfaces: see below. - With EWAR® eModule touch-free operated disinfectant pump with 950 ml tank.
- Designed for standard disinfectants.
- Inspection slot to indicate fill level.
- Accessible for refilling through lockable, hinged housing.
- Keyed alike cylinder lock in corrosion-resistant zinc die-casting.
- eModule battery-powered with two 1.5 V Baby/LR14 batteries.
Power supply available as an option. - Wear parts can be replaced as modules.
- Mounting: With two screws through key holes and one optional anti-theft hole in the back wall.
- Delivery includes fixing material and batteries.
- Weight (in kg): 1,8
516,00 €






