Labori sensoriga kraan külmale veele tööpinnale. S=200mm.220V
Tootekoodid ja tehniline info on kättesaadavad projekti või spetsiaalse päringu korral.
Ekspert aitab valida sobivaima lahenduse nii koju kui objekti jaoks.
Soovitame jagada tootelehte, mitte ainult koodi – see välistab segaduse.
Küsi julgelt: info@pegu.ee

Ühik: kompl
Tarneaeg: 14-21 päeva
Müüja: PEGU OÜ
Laborikraan Broen-Lab Sensoriga tööpinnale. S=200mm.220V
Pöördepiiraja 110 kraadi. Valge (RAL0008500)
Broen-LAB
Specifications
Aerator, with flow limitation 5 L/min
Sensor operated opening and closing function with bi-stabile technology
110° limited swivel spout
Temperatur range: 5-65° (41°F - 149°F) Max. working pressure: 10 bar/145 psi
Surface
Chemical resistant Polyester Based Surface treatment, UV-resistent.
BROEN-LAB colour: 2700 (RAL colour: 0008500)
Material with media contact
Brass
Rubber, EPDM
Silicone based lubricant PPSU
SS
PA
SPX Hose
Electrical connection
Adaptor: 100-240 V AC 50/60 Hz Battery: 6 V Lithium
Hose
Supplied with hoses.
Hose (1) on the picture is mandatory and included. Hose (2) on the picture is optional. See in the table below which options you have for hose (2)*.
For further options contact BROEN-LAB
Nöd- & ögon/ansiktsdusch med väggfäste. Rör och kopplingar i rostfritt stål och STANILOY som står emot korrosion och kemikalier m.m.
• Kroppsdusch med effektiv spolbild
• Ögondusch med FLOWFIX 26 l/min, stadig spolbild i varierande tryck
• Rostfritt stål och STANILOY
• Inkl. 3-sidig skylt monterad på dragstång, dekal & testkort
• Inkl. vajer-kit för krypande aktivering (ej på bild)
• Vikt: ca. 11kg • Anslutning: inv. 1” i toppen eller botten (min.1,5 bar)
Min. working pressure: 1.5 bar for all Eye Showers
Single valve turret fitting for compressed air with quick release coupling
1-Valve,Turret,1-Hole,Quick Coup.,M30,Hose,CA
2532 056 1021-52B
compressed air, nitrogen, carbon dioxide, argon, helium, low vacuum (1000 to 1 mbar)
Fittings are delivered with a 700mm SPX hose with OD10mm inlet conneciton.
MATERIALS WITH MEDIA CONTACT
Metals: Brass
Plastics: PVDF, SPX (hose)
Sealing: FKM
Lubricant: Perfluoropolyether based
ORDERING INFORMATION
For standard configuration please refer to the item numbers below.
Other options:
- different media
- removable hose nozzle with union nut
- disability-friendly handle (single valve only)
- micro flow headwork (for 2.0 non-burning gases) - high flow headwork (for 2.0 non-burning gases)
- alternative hose inlet connection / without a hose - other inlet options (type, length)
Keha hädaabidušš ukse SOS, seinale kinnitatud ukse kohale 3/4"