Seebidosaator

harjatud, R/V teras AISI304

Maht 950ml

298 x 450 x 510 mm
ca. 43 l

• Waste bin in robust, germ-reducing and easy-care stainless steel (AISI 304).
• All-stainless steel housing; visible surfaces satin finished and brushed.
  Further available surfaces: see below.
• Equipped with removable mesh basket. Capacity approx. 43 l. Accessible through lockable door. Waste disposal from above through an optional waste disposal ring or flap.
• Keyed alike cylinder lock in corrosion-resistant zinc die-casting.
• Wear parts can be replaced as modules.
• Mounting: With four screws through key holes and one optional anti-theft hole in the back wall off-floor below vanity unit, or as an option with console or base for a surcharge.
• Delivery includes fixing material.

• Weight (in kg): 8,0

400 x 600 x 200 mm
48 l

• Waste basket in chrome-plated steel wire.
• 2.5 mm and 4 mm thick lattice work. Fastening eyes in second row for invisible wall mounting. 
• Capacity approx. 48 l.
• Mounting: With two screws. 
• Delivery includes fixing material.

• Weight (in kg): 1,1

87 x 174 x 120 mm

• Sensor liquid soap dispenser in robust, germ-reducing and easy-care stainless steel (AISI 316L).
• For mounting in cabinet on site.
• With EWAR® eModule touch-free operated and non-drip soap pump with 200 ml tank. 
• Tank with large, lockable refill opening.
• Designed for standard liquid soaps or hand lotions. Refillable from the top. 
• eModule battery-powered with two 1.5 V Baby/LR14 batteries.
  Power supply available as an option.
• Wear parts can be replaced as modules.
• Mounting: With three screws through key holes in the back wall
• Delivery includes fixing material and self-adhesive information label „Soap“.

• Weight (in kg): 1,0

71 x 230 x 121 mm

• Disinfectant dispenser in robust, germ-reducing and easy-care stainless steel (AISI 316L).
• For mounting behind fixed mirror on site.
• One-hand operation disinfectant pump with 950 ml tank. 
• Tank with large, lockable refill opening.
• Designed for standard disinfectants. Accessible for refilling through spring stop pin and by removing from below. 
• Note: Not approved for medical areas.
• Wear parts can be replaced as modules.
• Mounting: With two screws through key holes and one optional anti-theft hole in the back wall.
  Depth of substructure installation: min. 160 mm
  Height above vanity unit: min. 280 mm
• Delivery includes fixing material and self-adhesive information label „Disinfectant“.

• Weight (in kg): 0,7