Mähkimislaud Wagner Ewar süvtatav R/V teras satiin WP2110
Kaubamärk:
Ühik: tk
Tarneaeg: 14-21 päeva
Ära maga sügist maha koos PEGU.EE-ga!
Kasuta ostukorvis sooduskoodi SEPTEMBER2026 ja saa soodustust!Pakkumine kehtib kuni 30.09.2026.
Lisa toode korvi ja vali tarnemeetod. Registreerumine pole kohustuslik!⚡
ℹ️ Hind sisaldab käibemaksu.
▼ Loe edasi: ...
✅ Populaarsed tooted Tallinna laos kohe olemas — tarneaeg 1–3 päeva või tule ise järele.
✅ Kui toode on tellimisel, uuri lähemalt — saame tihti pakkuda oodatust kiiremat tarnet: info@pegu.ee
✅ Kõikidele toodetele garantii 2 aastat ja 14‑päevane tagastusõigus.
✅ Automaatne arve e‑postile. E‑arve soovijatel palume lisada märge kommentaaridesse.
ℹ️ Hind sisaldab käibemaksu.
Hind:
2968,00 €
![]()
Kuumakse alates: 227,05 €
2671,20 €
Mähkimislaud Wagner Ewar süvtatav R/V teras satiin
WP2110
NAPPY CHANGER WP 2110
530 x 936 x 135 mm
vertical version
- Nappy changer in robust, germ-reducing and easy-care stainless steel (AISI 304).
- All-stainless steel housing; all corners fully welded, visible surfaces satin finished and brushed, handle strip with glossy surface.
Further available surfaces: see below. - Easy to open and close with maintenance free lifting mechanism supported by gas struts.
- Table surface in grey polypropylene, molded, without any visible fixtures.
- TÜV-tested and certified according to
DIN EN 1221-1: 2013
DIN EN 1221-2: 2013
AfPS GS 2014: 01 PAK
Load capacity 15 kg, test load 150 kg;
approved for public and private use. - Wear parts can be replaced as modules.
- Installation dimensions: 532 x 938 x 110 mm
- Mounting: With four screws in wall opening through fixing holes in the side walls.
- Delivery includes fixing material.
- Weight (in kg): 26,7
| AVAILABLE SURFACES | ORDER NUMBERS |
|---|---|
| satin finished (standard) | 727686 |
| (coloured) plastic powder - coating | 728686 |
Suggested text for specifications:
Nappy changer in stainless steel (AISI 304) for flush mounting. All-stainless steel housing; all corners fully welded, visible surfaces satin finished and brushed, handle strip with glossy surface. Table surface molded in polypropylene to fold out with lifting mechanism supported by gas struts. TÜV-tested and certified. Approved for public and private use. Delivery includes fixing material.
Dimensions: 530 x 936 x 135 mm
Article No. WP2110
Nappy changer in stainless steel (AISI 304) for flush mounting. All-stainless steel housing; all corners fully welded, visible surfaces satin finished and brushed, handle strip with glossy surface. Table surface molded in polypropylene to fold out with lifting mechanism supported by gas struts. TÜV-tested and certified. Approved for public and private use. Delivery includes fixing material.
Dimensions: 530 x 936 x 135 mm
Article No. WP2110
Kokku sobivad tooted
Katteraam WP2110 roostevaba teras harjatud Wagner Ewar 768662
WP 2110 COVERING FRAME 768662
for 530 x 936 mm
Tootekood: WAG-768662
, Tarneaeg: 14-21 päeva
, Viimistlus:
144,90 € (10%)
161,00 €
161,00 €
Sarnased tooted
Nagi Wagner Ewar satiin R/V teras Wagner Ewar AC215S
Nagi, satiin
R/V teras AISI 303
Ø 45 x 36 mm
Wagner Ewar
Tootekood: WAG-AC215S
, Tarneaeg: 7 päeva
, Viimistlus:
67,50 € (10%)
75,00 €
75,00 €
Medinox shampooniriiul rest R/V teras harjatud Mediclinics AI0160CS
R/V teras AISI304 harjatud
Tootekood: MAI0160CS
, Tarneaeg: 7 päeva
, Viimistlus:
45,90 € (10%)
51,00 €
51,00 €
Mähkimislaud Robust Red, avalikesse ruumidesse 312
DIMENSIONS
Width: 660 mm, Height: 780 mm, Depth closed: 200 mm, Depth open: 770 mm
Rootsi
Puidust
Punane
Tootekood: Robust Red 312
, Tarneaeg: 3 nädalad
, Viimistlus:
1011,75 € (5%)
1065,00 €
1065,00 €
Depth: 50mm
Diameter: 25mm
Weight: 0,45 kg.
Designer: Bønnelycke mdd
Tootekood: FRON1901-2
, Tarneaeg: 14 päeva
, Viimistlus:
74,70 € (10%)
83,00 €
83,00 €
Paberidosaator senasisene 250lk, R/V teras satiin Wagner Ewar WP114S
PAPER TOWEL DISPENSER WP 114
298 x 298 x 120 mm
ca. 250 paper towels
- Paper towel dispenser in robust, germ-reducing and easy-care stainless steel (AISI 304).
- All-stainless steel housing; all corners fully welded, visible surfaces satin finished and brushed.
Further available surfaces: see below. - With deep-drawn paper removal opening for easy paper removal.
- Designed for approx. 250 standard paper towels in zigzag fold.
Paper size (folded): 240-250 mm x 100-115 mm. - Inspection slot to indicate fill level.
- Accessible for refilling through lockable front flap with fall protection.
- Keyed alike cylinder lock in corrosion-resistant zinc die-casting.
- Wear parts can be replaced as modules.
- Installation dimensions: 300 x 300 x 110 mm
- Mounting: With four screws in wall opening through fixing holes in the side walls.
- Delivery includes fixing material and one pack of paper towels.
- Weight (in kg): 3,7
Tootekood: WAG-WP114S
, Tarneaeg: 14 päeva
, Viimistlus:
367,20 € (10%)
408,00 €
408,00 €
