Paberidosaator 500 lehte, seinale poleeritud
Kaubamärk:

Ühik: tk
Tarneaeg: 4 nädala
Müüja: PEGU OÜ
Kasuta sooduskoodi ja saa soodustust tootele, mis ei osale muudes Maikuu kampaaniates!
✔ Allahindlus ainult Mai kuu jooksul – kiirusta!
✔ Kvaliteetne toode mugavalt ja turvaliselt otse koju
✔ Professionaalne teenindus ja läbipaistev ostukeskkond
Lisa toode ostukorvi, sisesta seal kood PEGU-KEVAD2025 ja saa soodustus toodetele, mis ei kuulu teistesse sama perioodi kampaaniatesse.
Ainult mais – kasuta võimalust, enne kui kampaania lõpeb!
PEGU.ee – tark valik neile, kes hindavad disaini, kvaliteeti ja nutikat ostlemist.
Failid
Korpuse paksus 0,8 mm
AISI 304 roostevaba teras, poleeritud
kaal 1,8 kg
Rätikud max 260x100mm
C/Z volditud rätikute mahutavas 400-600 tk
125,00 €
PAPER TOWEL DISPENSER WP 117
200 x 300 x 185 mm
ca. 250 paper towels
- Paper towel dispenser in robust, germ-reducing and easy-care stainless steel (AISI 304).
- All-stainless steel housing; visible surfaces satin finished and brushed. Further available surfaces: see below.
- Paper guided through a non-wearing, constant pressure spring mechanism for easy paper removal.
- Designed for approx. 250 standard paper towels in zigzag- or c-fold.
Paper size (folded): 240-250 mm x 100-115 mm. - Accessible for refilling through spring flaps from the top.
- Installation dimensions: 266 x 155 mm
- Mounting: With four screws from below with brackets.
- Delivery includes fixing material and one pack of paper towels.
- Weight (in kg): 3,9
408,70 €
• Manual centre feed paper towel dispenser, surface mounted, designed and manufactured by Mediclinics.
• Robust and vandal-resistant, these dispensers are designed to be installed in any type of public washroom with high traffic of people. Models for a more efficient use of the paper and suitable for different washroom environments: gymnasiums, sports centers, hospitals and health centers, restaurants and similar type of installations; solutions even for use in different places.
• All these models have a front sliding door, especially designed for an easy paper replacement. They have been designed to facilitate and optimize the rational use of the paper, such as for example the toothed paper outlet that facilitates the paper cutting.
• All Mediclinics paper tower dispensers are supplied with a lock and special key for opening and screws.
Technical specifications
Dimensions 261x376x261mm
Paper roll capacity MAX d270mm
Paper height Max 270mm
Thickness of metal components 0.8mm
Weight (empty) 3.1
215,00 €
Kätepaberidosaator sensoriga Wagner Ewar 1+1 roll pattareiga R/V teras satiin
ELECTRONIC TOUCH-FREE PAPER ROLL DISPENSER WITH RESERVE ROLL BATTERY POWERED WP 1401
350 x 580 x 210 mm
1 paper roll + 1 reserve roll
Choose product variant
- Sensor paper roll dispenser with cabinet for reserve roll, battery-powered, in robust, germ-reducing and easy-care stainless steel (AISI 304).
- All-stainless steel housing; all corners fully welded, visible surfaces satin finished and brushed with tapered glossy surface at the bottom.
Further available surfaces: see below. - With touch-free operated, capacitive sensor technology, sensor distance approx. 3.5 cm.
Paper length and idle time adjustable.
Battery-powered with four standard 1.5 V Mono/LR20/12 A batteries. - Designed for one paper roll and one reserve roll with dimensions: Width 215 mm, outer diameter max. 180 mm, inner diameter 50 mm.
- Inspection slot to indicate fill level, residual roll function allows a reserve roll to be inserted before residual roll is completely used up.
- Accessible for refilling through lockable door.
- Keyed alike cylinder lock in corrosion-resistant zinc die-casting.
- Wear parts can be replaced as modules.
- Mounting: With four screws through key holes in the back wall.
- Delivery includes fixing material and first fill with one paper roll.
- Weight (in kg): 12,4
AVAILABLE SURFACES | ORDER NUMBERS |
---|---|
satin finished (standard) | 733260 |
highly polished | 732260 |
(coloured) plastic powder - coating | 728260 |
Sensor paper roll dispenser with cabinet for reserve roll, battery-powered, in stainless steel (AISI 304) for surface mounting. All-stainless steel housing; all corners fully welded, visible surfaces satin finished and brushed with tapered glossy surface at the bottom. With touch-free operated, capacitive sensor technology. Paper length and idle time adjustable. Battery-powered with four standard 1.5 V Mono/LR20/12 A batteries. Designed for one paper roll and one reserve roll with dimensions: Width 215 mm, outer diameter max. 180 mm, inner diameter 50 mm. Inspection slot to indicate fill level. Accessible for refilling through lockable door. Residual roll function allows a reserve roll to be inserted before residual roll is completely used up. Keyed alike cylinder lock in corrosion-resistant zinc die-casting. Delivery includes fixing material and first fill with one paper roll.
Dimensions: 350 x 580 x 210 mm
Article No. WP1401
933,30 €
WET WIPE TOILET PAPER DISPENSER WP 119
172 x 79 x 130 mm
- Wet wipe toilet paper dispenser in robust, germ-reducing and easy-care stainless steel (AISI 304).
- All-stainless steel housing; visible surfaces satin finished and brushed.
Further available surfaces: see below. - Designed for one standard wet wipe toilet paper box with dimensions of approx. 165 x 78 x 121 mm
- Accessible through hinged lid.
- Mounting: With two screws through key holes and one optional anti-theft hole in the back wall.
- Delivery includes fixing material.
- Weight (in kg): 1,3
AVAILABLE SURFACES | ORDER NUMBERS |
---|---|
satin finished (standard) | 727525 |
highly polished | 731525 |
(coloured) plastic powder - coating | 729525 |
Wet wipe toilet paper dispenser in stainless steel (AISI 304) for surface mounting. All-stainless steel housing; visible surfaces satin finished and brushed. Designed for one standard wet wipe toilet paper box. Accessible through hinged lid. Delivery includes fixing material.
Dimensions: 172 x 79 x 135 mm
Article No. WP119
256,20 €