Pissuaari vahesein LISO, roostevaba teras AISI 304
LISO urinal divider for wall-mounting
|Finish||304 polished satin stainless steel|
Kätepesuvalamu Endura ED1
automatic washing system for wellingtons with jets - 12V, 50Hz
AMO 01 is a stainless steel automatic washing system for wellingtons with sensor-controlled water nozzles. When stepping into the washing chamber of the system (scanning zone) water starts to flow from the nozzles automatically and wellingtons are cleaned of dirt. Water stops flowing with a certain time delay after the foot has been removed from the scanning zone.
AMO 01 is designed for a single pipe inlet of pre-mixed water from the circulation or water pre-mixed by means of a thermostatic valve.
The AMO 01 automatic washing system is intended mainly for operations with slight shoe contamination where quick washing at maximum water savings is guaranteed.
- body of the washing machine
- photocell head
- nozzles – 8 pcs
- electromagnetic valves 2 pcs
- corner valves with filter
- connecting hoses
|Radius of sensor||0 – 0,4 m|
|Water inlet||G 1/2“|
|Water pressure||0,3 – 1,0 MPa|
|Outlet||d = 32 mm|
|Inner dimensions of the trough||250 x 400 x 280 mm|
|Electricity protection||IP 55|
|Power supply||12 V, 50 Hz|
|Power requirement||10 VA|
|Source of power supply||ZAC 1/20 (max. 2 x AMO 01)|
|ZAC 1/50 (max. 5 x AMO 01)|
- Set up water inlet as per picture
- Set up outlet d = 32 mm
- Set up cable for power supply – 12 V, 50 Hz from source of power supply ZAC
|Size (mm):||525 x 334 x 97|
|Large bowl (mm):||500 x 310 x 83|
Icon Hand Wash Basin IC1-32 in stainless steel 18/10, is designed for under mounting.The hand wash basin is pressed in one piece and has laser-cut integrated outlet holes that are concealed by a removable outlet cover.The basin is supplied with waste under part and overflow equipment.