| Water inlet | G 1/2" |
| Water pressure | 2 – 6 Bar, recommended 3 Bar |
| Outlet | d = 40 mm |
| Inner dimensions of sink | d = 290 mm |
| Weight | 20 kg |
Roostevaba teras valamu KEG
Märkus sisekujundajale ja projekteerijale Projekti spetsifikatsiooni koostamisel palume lisada PEGU ametliku tarnijana. Vaata tootevalikut PEGU e-poes
✔ Turvaline makse: Maksekeskuse kaudu või otse panga kaudu (Swedbank, SEB, LHV, Luminor, Coop)
✔ Ametlikud Euroopa brändid: Damixa, Presto, Mediclinics, Haceka, Delabie ja teised
✔ Tagastusgarantii: 14 päeva – ost ilma riskita
✔ Tarneaeg: 1–3 tööpäeva (kui kaup on Tallinna laos), uued tellimused tehases märgitud vastavalt tarneajale
Kaubamärk:
Ühik: tk
Tarneaeg: 14-21 päeva
✅ PEGU.ee-s valime ainult seda, mida on meeldiv omada kodus.
Nutikad lahendused, kaunis disain ja tõestatud kvaliteet.
Kui valid meie juurest, valid kindlustunde.
Suurepärane valik!
Lisa toode ostukorvi ja vormista tellimus!
Täna saad oma ostu lõpetada isikliku promokoodiga FDe24DA7bDaa
✅ Kopeeri ja kleebi see kood kupongi väljale ostukorvis.
Hind:
![]()
Kuumakse alates: 73,78 €
868,00 €
Roostevaba teras valamu KEG
Characteristics
- stainless steel counter top washbasin
- assembling by screws
- material AISI - 304
- brushed finish
Sarnased tooted
Portinox WC pott loputuskastiga, ja istmega
Tootekood: PINP-655-OVC-TB-P+PWC Mahagon
, Tarneaeg: 8 nädalad
, Viimistlus:
2468,82 €
REDO wall-mounted washbasin
Ref. 121710
Wall-mounted washbasin.
Basin internal diameter: 320mm.
Clean and simple design.
Bacteriostatic 304 stainless steel.
Polished satin finish.
Stainless steel thickness: 1.2mm.
Rounded edges prevent injury.
With central tap hole Ø 35mm.
Supplied with 1 ¼" waste.
Without overflow.
Supplied with fixing elements.
CE marked. Complies with European standard EN 14688.
Weight: 3kg.
TECHNICAL FEATURES
REDO wall-mounted washbasin
Ref. 121710
| Height | 150mm |
|---|---|
| Length | 375mm |
| Width | 430mm |
| Thickness | 1.2mm |
| Finish | 304 polished satin stainless steel |
Tootekood: DE-121710
, Tarneaeg: 14 päeva
, Viimistlus:
533,61 €
Pissuaari mehhanism infra-red paigalduse karbiga, 24 V DC
SLP 02K
Urinal infra-red flushing unit with a mounting box, 24 V DC
Characteristics
- system reacts to the user attendance in front of the urinal at a maximum distance of 0,7 m, minimum stay time in active range is 7,5 s
- water flows after the user leaves active range
- adjustable flushing time 0,5 - 15,5 s
- parameters adjustment by remote control SLD 03
- automatic hygiene flushing after 24 hours non-use
- possibility to regulate a water flow by the ball valve
| Order number | 01022 |
| Code | SLP 02K |
Supply specification
SLP 02K - Supply No. 01022 - stainless steel cover with electronics, plastic mounting box with brass screw coupling, electromagnetic valve and ball valve
Technical information
Stainless steel cover dimension: 170 x 170 x 10 mm
Mounting box dimension:140 x 140 x 75 mm
Operating voltage: 24 V DC
Active range: 0,6 - 0,75 m
Recommended flow pressure: 0,1 - 0,6 MPa
Rate of flow: 18 l/min (inf. data)
Water inlet: male thread G 3/4“
Water outlet: male thread G 3/4“
Mounting box dimension:140 x 140 x 75 mm
Operating voltage: 24 V DC
Active range: 0,6 - 0,75 m
Recommended flow pressure: 0,1 - 0,6 MPa
Rate of flow: 18 l/min (inf. data)
Water inlet: male thread G 3/4“
Water outlet: male thread G 3/4“
Tootekood: SA-SLP02K
, Tarneaeg: 14-21 päeva
, Viimistlus:
360,82 €
Joogifontään free-standing mehaaniline R/V teras AISI316
AFO 02 - IIstainless steel free-standing drinking fountain (indoor/outdoor)
AFO 02-II is a stainless steel drinking fountain of modern design with a manual press valve that allows its easy use. The water flows only when the valve is pressed and then there is a certain adjusted time to rinse out the nozzle.
The drinking fountain is to be placed in an open space. It is made up of an anchoring part intended for embedding in concrete and the column itself with a press valve and nozzle. These parts are connected by means of 3 screws and the upper part can be, therefore, easily dismounted in case of necessity (e.g. during winter).
The water inlet is fitted with a flexible hose, the siphon is made from a stretchy, flexible connector. The flexible finish of the water inlet and outlet allows the variable and problem-free connection of the fountain.
AFO 02-II stainless steel fountain is suitable mainly for schools, medical facilities and spa resorts, and is utilizable outdoors.
Drinking fountain AFO 02-II is manufactured from the stainless steel AISI 304. AFO 02.CL-II is made of the stainless steel AISI 316 and is suitable for places with higher concentration of chlorine.
For cleaning we recomnned WÜRTH detergents – material preservation (no. 0893 121 K) and material cleaning (no. 893 121 1).Detail of the bowl
Package contents
- stainless steel column and cone with nozzle
- press valve
- anchoring construction
- flexible hose siphon
- connecting hoses
- anchoring material
- Set-up water inlet - pipe G 1/2“
- Set-up drainage d = 40 mm
- Prepared alcove for embedding (concreting) in the base construction
Tootekood: AZP-AFO02.CL
, Tarneaeg: 3-4 nädalad
, Viimistlus:
1934,20 €
Semi-recessed QUADRA washbasin
Ref. 120650
Semi-recessed washbasin, 380x380mm.
Suitable for use with wall-mounted or extended mixer/tap.
Basin internal diameter: 310mm.
Cutout diameter: 310mm.
Stainless steel thickness: 1.2mm.
Polished satin finish.
Stainless steel thickness: 1.2mm.
One-piece, seam-free pressed bowl.
Rounded edges prevent injury.
Supplied with 1¼" waste.
Without overflow.
CE marked. Complies with European standard EN 14688.
Weight: 3kg.
TECHNICAL FEATURES
Semi-recessed QUADRA washbasin
Ref. 120650
| Height | 130mm |
|---|---|
| Length | 380mm |
| Width | 380mm |
| Thickness | 1.2mm |
| Finish | Polished satin 304 stainless steel |
Tootekood: DE-120650
, Tarneaeg: 14-21 päeva
, Viimistlus:
620,00 €
